|
|
/************************************************************************************
* arch/z80/src/ez80/ez80f91_emac.h
* arch/z80/src/chip/ez80f91_emac.h
*
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_Z80_SRC_EZ80_EZ80F91_EMAC_H
#define __ARCH_Z80_SRC_EZ80_EZ80F91_EMAC_H
/************************************************************************************
* Included Files
************************************************************************************/
/************************************************************************************
* Definitions
************************************************************************************/
/* EMACC Registers *****************************************************************/
/* Provided in ez80f91.h */
/* EMAC configuration 1/2/3 register bit settings ***********************************/
#define EMAC_CFG1_DCRCC 0x01 /* Bit 0: 1=4 bytes of proprietary header */
#define EMAC_CFG1_HUGEN 0x02 /* Bit 1: 1=Allow unlimited size frames to be recieved */
#define EMAC_CFG1_FLCHK 0x04 /* Bit 2: 1=Frame lengths compared to length/type */
#define EMAC_CFG1_FULLHD 0x08 /* Bit 3: 1=Enable full duplex mode */
#define EMAC_CFG1_CRCEN 0x10 /* Bit 4: 1=Append CRC to every frame */
#define EMAC_CFG1_VLPAD 0x20 /* Bit 5: 1=Pad all short frames to 64 bytes, append CRC */
#define EMAC_CFG1_ADPADN 0x40 /* Bit 6: 1=Enable frame detection by check VALN protocol ID */
#define EMAC_CFG1_PADEN 0x80 /* Bit 7: 1=Pad all short frames with zeros. */
#define EMAC_CFG2_LCOLMASK 0x3f /* Bits 0-5: Number bytes after start frame for collision */
#define EMAC_CFG2_NOBO 0x40 /* Bit 6: 1=immediate transmit after collision */
#define EMAC_CFG2_BPNB 0x80 /* Bit 7: 1=after collision retransmit without back-off */
#define EMAC_CFG3_RETRYMASK 0x0f /* Bits 0-3: Number retransmissions before abort */
#define EMAC_CFG3_BITMD 0x10 /* Bit 4: 1=Enable 10Mbps ENDEC mode */
#define EMAC_CFG3_XSDFR 0x20 /* Bit 5: 1=Defer to carrier indefinitely */
#define EMAC_CFG3_PUREP 0x40 /* Bit 6: 1=Verify preamble */
#define EMAC_CFG3_LONGP 0x80 /* Bit 7: 1=only allow preamble < 12 bytes */
#define EMAC_CFG4_RXEN 0x01 /* Bit 0: 1=Receive frames */
#define EMAC_CFG4_TPAUSE 0x02 /* Bit 1: 1=Force pause condition */
#define EMAC_CFG4_TXFC 0x04 /* Bit 2: 1=Transmit pause control frames */
#define EMAC_CFG4_RXFC 0x08 /* Bit 3: 1=Act on receive pause control frames */
#define EMAC_CFG4_PARF 0x10 /* Bit 4: 1=Receive all frames */
#define EMAC_CFG4_THDF 0x20 /* Bit 5: 1=Asser back-pressure */
#define EMAC_CFG4_TPCF 0x40 /* Bit 6: 1=Transmit pause control frame. */
/* Bit 7: reserved */
/* EMAC AFR register bit settings ***************************************************/
#define EMAC_AFR_BC 0x01 /* Bit 0: 1=Accept broadcast messages */
#define EMAC_AFR_QMC 0x02 /* Bit 1: 1=Accept only qualified multicast messages */
#define EMAC_AFR_MC 0x04 /* Bit 2: 1=Accept any multicast message */
#define EMAC_AFR_PROM 0x08 /* Bit 3: 1=Enable promiscuous mode */
/* Bits 4-7: Reserved */
/* EMAC MII management register bit settings ****************************************/
#define EMAC_MIIMGMT_CLKMASK 0x07 /* Bits 0-2: Divisor that produces MDC from SCLK */
# define EMAC_MDC_DIV4 0x01 /* MDC = SCLK / 4 */
# define EMAC_MDC_DIV6 0x02 /* MDC = SCLK / 6 */
# define EMAC_MDC_DIV8 0x03 /* MDC = SCLK / 8 */
# define EMAC_MDC_DIV10 0x04 /* MDC = SCLK / 10 */
# define EMAC_MDC_DIV14 0x05 /* MDC = SCLK / 14 */
# define EMAC_MDC_DIV20 0x06 /* MDC = SCLK / 20 */
# define EMAC_MDC_DIV28 0x07 /* MDC = SCLK / 28 */
#define EMAC_MIIMGMT_SPRE 0x08 /* Bit 3: 1=Suppress MDO preamble */
#define EMAC_MIIMGMT_SCAN 0x10 /* Bit 4: 1=Perform continus read cycles */
#define EMAC_MIIMGMT_SCINC 0x20 /* Bit 5: 1=Increment PHY address on scan cycle */
#define EMAC_MIIMGMT_RSTAT 0x40 /* Bit 6: 1=Read status from PHY (via PRSD) */
#define EMAC_MIIMGMT_LCTLD 0x80 /* Bit 7: 1=Send CTLD control data to PHY */
/* EMAC PHY unit select address register bit settings *******************************/
#define EMAC_RGAD_MASK 0x1f /* 5-bit value selects address within PHY */
/* EMAC PHY address register bit settings *******************************************/
#define EMAC_FIAD_MASK 0x1f /* 5-bit value selects the external PHY */
/* EMAC reset control register bit settings *****************************************/
#define EMAC_RST_HRMGT 0x01 /* Bit 0: 1=Reset EMAC management function */
#define EMAC_RST_HRRMC 0x02 /* Bit 1: 1=Reset EMAC receive control function */
#define EMAC_RST_HRTMC 0x04 /* Bit 2: 1=Reset EMAC transmit control function */
#define EMAC_RST_HRRFN 0x08 /* Bit 3: 1=Reset receive function */
#define EMAC_RST_HRTFN 0x10 /* Bit 4: 1=Reset transmit function */
#define EMAC_RST_SRST 0x20 /* Bit 5: 1=Software reset active */
/* Bits 6-7: Reserved */
/* EMAC bufsize register bit settings ***********************************************/
#define EMAC_BUFSIZ_BUFSZMASK 0xc0 /* Bits 6-6: Rx/Tx buffer size */
# define EMAC_BUFSIZ_256b 0x00 /* EMAC Rx/Tx buffer size = 256 bytes */
# define EMAC_BUFSIZ_128b 0x40 /* EMAC Rx/Tx buffer size = 128 bytes */
# define EMAC_BUFSIZ_64b 0x80 /* EMAC Rx/Tx buffer size = 64 bytes */
# define EMAC_BUFSIZ_32b 0xc0 /* EMAC Rx/Tx buffer size = 32 bytes */
#define EMAC_BUFSIZ_TPCFLMASK 0x3f /* Bits 0-5: Tranmsit pause frame level */
/* EMAC interrupt enable register bit settings **************************************/
#define EMAC_EIN_TXDONE 0x01 /* Bit 0: 1=Enable transmit done interrupt */
#define EMAC_EIN_TXCF 0x02 /* Bit 1: 1=Enable transmit control frame interrupt */
#define EMAC_EIN_RXOVR 0x04 /* Bit 2: 1=Enable receive overrun interrupt */
#define EMAC_EIN_RXDONE 0x08 /* Bit 3: 1=Enable receive done interrupt */
#define EMAC_EIN_RXPCF 0x10 /* Bit 4: 1=Enable receive pause control frame interrupt */
#define EMAC_EIN_RXCF 0x20 /* Bit 5: 1=Enable receive control frame interrupt */
#define EMAC_EIN_MGTDONE 0x40 /* Bit 6: 1=Enable MII Mgmt done interrupt */
#define EMAC_EIN_TXFSMERR 0x80 /* Bit 7: 1=Enable transmit state machine error interrupt */
/* EMAC interrupt status register bit settings **************************************/
#define EMAC_ISTAT_TXDONE 0x01 /* Bit 0: 1=Transmit done interrupt */
#define EMAC_ISTAT_TXCF 0x02 /* Bit 1: 1=Transmit control frame interrupt */
#define EMAC_ISTAT_RXOVR 0x04 /* Bit 2: 1=Receive overrun interrupt */
#define EMAC_ISTAT_RXDONE 0x08 /* Bit 3: 1=Receive done interrupt */
#define EMAC_ISTAT_RXPCF 0x10 /* Bit 4: 1=Receive pause control frame interrupt */
#define EMAC_ISTAT_RXCF 0x20 /* Bit 5: 1=Receive control frame interrupt */
#define EMAC_ISTAT_MGTDONE 0x40 /* Bit 6: 1=MII Mgmt done interrupt */
#define EMAC_ISTAT_TXFSMERR 0x80 /* Bit 7: 1=Transmit state machine error interrupt */
/* EMAC MII status register bit settings ********************************************/
#define EMAC_MIISTAT_RDADRMK 0x1f /* Bits 0-4: PHY addressed in current scan cyle */
#define EMAC_MIISTAT_NVALID 0x20 /* Bit 5: 1=PRSD is valid */
#define EMAC_MIISTAT_MIILF 0x40 /* Bit 6: 1=PHY link OK */
#define EMAC_MIISTAT_BUSY 0x80 /* Bit 7: 1=MII management in progress */
/* EMAC FIFO flags register bit settings ********************************************/
#define EMAC_FFLAGS_RFE 0x01 /* Bit 0: 1=Receive FIFO empty */
#define EMAC_FFLAGS_RFAE 0x02 /* Bit 0: 1=Receive FIFO almost empty */
#define EMAC_FFLAGS_RFAF 0x04 /* Bit 0: 1=Receive FIFO almost full */
#define EMAC_FFLAGS_RFF 0x08 /* Bit 0: 1=Receive FIFO full */
#define EMAC_FFLAGS_TFE 0x10 /* Bit 0: 1=Transmit FIFO empty */
#define EMAC_FFLAGS_TFAE 0x20 /* Bit 0: 1=Transmit FIFO almost empty */
#define EMAC_FFLAGS_TFF 0x80 /* Bit 0: 1=Trasnmit FIFO full */
/* EMAC Transmit Descriptor Status **************************************************/
#define EMAC_TXDESC_NCOLL 0x0001 /* Bits 0-3: Bumber of collisions that occurred
* while transmitting the packet. */
#define EMAC_TXDESC_MXCOLL 0x0010 /* Bit 4: 1=maximum number of collisions.
* number > CFG3[3:0]. packet aborted */
#define EMAC_TXDESC_LATECOLL 0x0020 /* Bit 5: 1=late collision. Collision is detected
* at a byte count > CFG2[5:0]. Collisions detected
* before the byte count reaches CFG2[5:0] are early
* collisions and retried. */
#define EMAC_TXDESC_FIFOUNDR 0x0040 /* Bit 6: TxFIFO Underrun. Check the TxAbort
* bit to see if the packet is aborted or retried. */
#define EMAC_TXDESC_XSDFR 0x0080 /* Bit 7: Packet is excessively deferred. (> 6071 nibble
* times in 100 BaseT or 24,287 bit times in 10 BaseT). */
#define EMAC_TXDESC_PKTDEFFRD 0x0100 /* Bit 8: Packet is deferred */
#define EMAC_TXDESC_CRCERROR 0x0200 /* Bit 9: Invalid FCS (CRC). Set CRCEN = 0 and the
* last 4 bytes of the packet are not the valid FCS. */
#define EMAC_TXDESC_LCERROR 0x0400 /* Bit 10: Type/Length field is not a Type field and
* does not match the actual data byte length of
* the Ethernet packet. The data byte length is
* the number of bytes of data in the Ethernet
* packet between the Type/Length field and the FCS. */
#define EMAC_TXDESC_LOOR 0x0800 /* Bit 11: Type/Length field is out of range (larger
* than 1518 bytes). */
#define EMAC_TXDESC_HUGE 0x1000 /* Bit 12: 1=Packet size is very large(Pkt_Size > MAXF). */
#define EMAC_TXDESC_BPA 0x2000 /* Bit 13: 1=Back pressure applied */
#define EMAC_TXDESC_ABORT 0x4000 /* Bit 14: 1=Packet aborted (not transmitted). */
#define EMAC_TXDESC_OWNER 0x8000 /* Bit 15: 0=Host (eZ80®) owns, 1=EMAC owns. */
/* Receive Descriptor Status ********************************************************/
#define EMAC_RXDESC_OVR 0x0001 /* Bit 0: 1=A Receive Overrun occurs in this packet. An
* overrun occurs when all of the EMAC Receive
* buffers are in use and the Receive FIFO is full.
* The hardware ignores all incoming packets until the
* ISTAT Register [RXOVR] bit is cleared by the software.
* There is no indication as to how many packets are
* ignored. */
#define EMAC_RXDESC_DVEVENT 0x0002 /* Bit 1: 1=Receive data (RxDV) event is previously seen.
* Indicates that the last Receive event is not long
* enough to be a valid packet. */
#define EMAC_RXDESC_CEVENT 0x0004 /* Bit 2: 1=Carrier event is previously seen. This event is
* defined as Rx error RxER = 1, receive data valid
* (RxDV) = 0 and receive data (RxD) = Eh */
#define EMAC_RXDESC_CODEV 0x0008 /* Bit 3: 1=A code violation is detected. The PHY asserts
* Rx error (RxER). */
#define EMAC_RXDESC_LCERROR 0x0010 /* Bit 4 1=Type/Length field is not a Type field and it does
* not match the actual data byte length of the
* Ethernet packet. The data byte length is the
* number of bytes of data in the Ethernet packet
* between the Type/Length field and the FCS. */
#define EMAC_RXDESC_LOOR 0x0020 /* Bit 5: 1=Type/Length field is out of range (larger
* than 1518 bytes). */
#define EMAC_RXDESC_UOPCODE 0x0040 /* Bit 6: 1=Unsupported Op Code is indicated in the Op
* Code field of the Ethernet packet. */
#define EMAC_RXDESC_VLAN 0x0080 /* Bit 7: 1=The packet is a VLAN packet */
#define EMAC_RXDESC_BCPKT 0x0100 /* Bit 8: 1=packet contains a broadcast address.
#define EMAC_RXDESC_MCPKT 0x0200 /* Bit 9: 1=The packet contains a multicast address */
#define EMAC_RXDESC_CR 0x0400 /* Bit 10: 1=The packet is a control frame */
#define EMAC_RXDESC_PCF 0x0800 /* Bit 11: 1=The packet is a pause control frame */
#define EMAC_RXDESC_LONGEVNT 0x1000 /* Bit 12: 1= A Long or Dropped Event occurs. A Long Event is
* when a packet over 50,000 bit times occurs. A
* Dropped Packet can occur if the minimum interpacket
* gap is not met, the preamble is not pure, and
* the CFG3[PUREP] bit is set, or if a preamble over
* 11 bytes in length is detected and the CFG3[LONGP]
* bit is set to 1. */
#define EMAC_RXDESC_CRCERR 0x2000 /* Bit 13: 1=The CRC (FCS) is in error */
#define EMAC_RXDESC_ALGNERR 0x4000 /* Bit 14: 1=An odd number of nibbles is received. */
#define EMAC_RXDESC_OK 0x8000 /* Bit 15: 1=Packet received intact. */
/************************************************************************************
* Public Types
************************************************************************************/
/* EMAC descriptor structure (7 bytes) */
#ifndef __ASSEMBLY__
struct ez80emac_desc_s
{
uint24 np; /* Pointer to the start of the next packet */
uint16 pktsize; /* Number of bytes in the packet, including the 4 CRC
* bytes, but excluding the 7 descriptor table bytes. */
uint16 stat; /* Status of the packet. Differs for TX and RX packets
* (see EMAC_RX/TXDESC_* definitions) */
};
#endif
#define SIZEOF_EMACSDESC 7
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif /* __cplusplus */
/************************************************************************************
* Public Functions
************************************************************************************/
#undef EXTERN
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_Z80_SRC_EZ80_EZ80F91_EMAC_H */
|