|
|
/************************************************************************************
* arch/z80/src/z180/z180_config.h
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_Z80_SRC_Z180_Z180_CONFIG_H
#define __ARCH_Z80_SRC_Z180_Z180_CONFIG_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <arch/z180/chip.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Verify that selected features match the capability of the selected CPU */
#ifndef HAVE_Z8X181
# undef CONFIG_Z180_SCC
# undef CONFIG_Z180_CTC
#endif
#ifndef HAVE_Z8X182
# undef CONFIG_Z180_ESCCA
# undef CONFIG_Z180_ESCCB
# undef CONFIG_Z180_PORTC
# undef CONFIG_Z180_MIMIC
#endif
#if !defined(HAVE_Z8X181) && !defined(HAVE_Z8X182)
# undef CONFIG_Z180_PORTA
# undef CONFIG_Z180_PORTB
#endif
/* Are any UARTs enabled? */
#undef HAVE_UART
#undef HAVE_SCC
#undef HAVE_SERIAL
#if defined(CONFIG_Z180_UART0) || defined(CONFIG_Z180_UART1)
# define HAVE_UART 1
# define HAVE_SERIAL 1
#endif
#if defined(CONFIG_Z180_SCC) || defined(CONFIG_Z180_ESCCA) || \
defined(CONFIG_Z180_ESCCB)
# define HAVE_SCC 1
# define HAVE_SERIAL 1
#endif
/* Make sure all features are disabled for disabled UARTs/[E]SCC channels. This
* simplifies checking later.
*/
#ifndef CONFIG_Z180_UART0
# undef CONFIG_Z180_UART0_SERIAL_CONSOLE
#endif
#ifndef CONFIG_Z180_UART1
# undef CONFIG_Z180_UART1_SERIAL_CONSOLE
#endif
#ifndef CONFIG_Z180_SCC
# undef CONFIG_SCC_SERIAL_CONSOLE
#endif
#ifndef CONFIG_Z180_ESCCA
# undef CONFIG_Z180_ESCCA_SERIAL_CONSOLE
#endif
#ifndef CONFIG_Z180_ESCCA
# undef CONFIG_Z180_ESCCB_SERIAL_CONSOLE
#endif
/* Is there a serial console? There should be at most one defined. */
#undef HAVE_UART_CONSOLE
#undef HAVE_SCC_CONSOLE
#undef HAVE_SERIAL_CONSOLE
#if defined(CONFIG_Z180_UART0_SERIAL_CONSOLE)
# undef CONFIG_Z180_UART1_SERIAL_CONSOLE
# undef CONFIG_Z180_SCC_SERIAL_CONSOLE
# undef CONFIG_Z180_ESCCA_SERIAL_CONSOLE
# undef CONFIG_Z180_ESCCB_SERIAL_CONSOLE
# define HAVE_UART_CONSOLE 1
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_Z180_UART1_SERIAL_CONSOLE)
# undef CONFIG_Z180_SCC_SERIAL_CONSOLE
# undef CONFIG_Z180_ESCCA_SERIAL_CONSOLE
# undef CONFIG_Z180_ESCCB_SERIAL_CONSOLE
# define HAVE_UART_CONSOLE 1
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_Z180_ESCC_SERIAL_CONSOLE)
# undef CONFIG_Z180_ESCCA_SERIAL_CONSOLE
# undef CONFIG_Z180_ESCCB_SERIAL_CONSOLE
# define HAVE_SCC_CONSOLE 1
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_Z180_ESCCA_SERIAL_CONSOLE)
# undef CONFIG_Z180_ESCCB_SERIAL_CONSOLE
# define HAVE_SCC_CONSOLE 1
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_Z180_ESCCB_SERIAL_CONSOLE)
# define HAVE_SCC_CONSOLE 1
# define HAVE_SERIAL_CONSOLE 1
#endif
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
#endif /* __ARCH_Z80_SRC_Z180_Z180_CONFIG_H */
|