############################################################
# configs/c5471evm/defconfig
#
# Copyright (C) 2007 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name Gregory Nutt nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################
#
# architecture selection
#
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
# processor architecture.
# CONFIG_ARCH_name - for use in C code. This identifies the
# particular chip or SoC that the architecture is implemented
# in.
# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
# CONFIG_ARCH_CHIP_name - For use in C code
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
# the board that supports the particular chip or SoC.
# CONFIG_ARCH_BOARD_name - for use in C code
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
# CONFIG_ROM_VECTORS - unique to c5471
# CONFIG_DRAM_END - the size of installed DRAM.
# Unique to c5471
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471.
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
#
CONFIG_ARCH=arm
CONFIG_ARCH_ARM=y
CONFIG_ARCH_CHIP=c5471
CONFIG_ARCH_CHIP_C5471=y
CONFIG_ARCH_BOARD=c5471evm
CONFIG_ARCH_BOARD_C5471EVM=y
CONFIG_BOARD_LOOPSPERMSEC=1250
CONFIG_ROM_VECTORS=n
CONFIG_DRAM_END=0x11000000
CONFIG_ARCH_LEDS=y
CONFIG_ARCH_STACKDUMP=y
#
# C5471 specific device driver settings
#
# CONFIG_SERIAL_IRDA_CONSOLE - selects the IRDA UART for the
# console ant ttys0 (default is the modem UART).
# CONFIG_UART_*_HWFLOWCONTROL - enables hardware flow control
# CONFIG_UART_*_RXBUFSIZE - Characters are buffered as received.
# This specific the size of the receive buffer
# CONFIG_UART_*_TXBUFSIZE - Characters are buffered before
# being sent. This specific the size of the transmit buffer
# CONFIG_UART_*_BAUD - The configure BAUD of the UART. Must be
# CONFIG_UART_*_BITS - The number of bits. Must be either 7 or 8.
# CONFIG_UART_*_PARTIY - 0=no parity, 1=odd parity, 2=even parity
# CONFIG_UART_*_2STOP - Two stop bits
#
CONFIG_SERIAL_IRDA_CONSOLE=n
CONFIG_UART_IRDA_HWFLOWCONTROL=n
CONFIG_UART_MODEM_HWFLOWCONTROL=n
CONFIG_UART_IRDA_RXBUFSIZE=256
CONFIG_UART_MODEM_RXBUFSIZE=256
CONFIG_UART_IRDA_TXBUFSIZE=256
CONFIG_UART_MODEM_TXBUFSIZE=256
CONFIG_UART_IRDA_BAUD=115200
CONFIG_UART_MODEM_BAUD=115200
CONFIG_UART_IRDA_BITS=8
CONFIG_UART_MODEM_BITS=8
CONFIG_UART_IRDA_PARITY=0
CONFIG_UART_MODEM_PARITY=0
CONFIG_UART_IRDA_2STOP=0
CONFIG_UART_MODEM_2STOP=0
#
# General OS setup
#
# CONFIG_EXAMPLE - identifies the subdirectory in examples
# that will be used in the build
# CONFIG_DEBUG - enables built-in debug options
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
# CONFIG_MM_REGIONS - If the architecture includes multiple
# regions of memory to allocate from, this specifies the
# number of memory regions that the memory manager must
# handle and enables the API mm_addregion(start, end);
# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
# time console output
# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
# or TICKS_PER_MSEC=10. This setting may be defined to
# inform NuttX that the processor hardware is providing
# system timer interrupts at some interrupt interval other
# than 10 msec.
# CONFIG_RR_INTERVAL - The round robin timeslice will be set
# this number of milliseconds; Round robin scheduling can
# be disabled by setting this value to zero.
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
# scheduler to monitor system performance
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
# task name to save in the TCB. Useful if scheduler
# instrumentation is selected. Set to zero to disable.
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
# Used to initialize the internal time logic.
# CONFIG_JULIAN_TIME - Enables Julian time conversions
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
# provides /dev/console. Enables stdout, stderr, stdin.
#
CONFIG_EXAMPLE=ostest
CONFIG_DEBUG=n
CONFIG_DEBUG_VERBOSE=n
CONFIG_MM_REGIONS=1
CONFIG_ARCH_LOWPUTC=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_INSTRUMENTATION=n
CONFIG_TASK_NAME_SIZE=0
CONFIG_START_YEAR=2007
CONFIG_START_MONTH=2
CONFIG_START_DAY=13
CONFIG_JULIAN_TIME=n
CONFIG_DEV_CONSOLE=y
#
# The following can be used to disable categories of
# APIs supported by the OS. If the compiler supports
# weak functions, then it should not be necessary to
# disable functions unless you want to restrict usage
# of those APIs.
#
# There are certain dependency relationships in these
# features.
#
# o mq_notify logic depends on signals to awaken tasks
# waiting for queues to become full or empty.
# o pthread_condtimedwait() depends on signals to wake
# up waiting tasks.
#
CONFIG_DISABLE_CLOCK=n
CONFIG_DISABLE_POSIX_TIMERS=n
CONFIG_DISABLE_PTHREAD=n
CONFIG_DISABLE_SIGNALS=n
CONFIG_DISABLE_MQUEUE=n
CONFIG_DISABLE_MOUNTPOINT=y
CONFIG_DISABLE_ENVIRON=y
#
# Misc libc settings
#
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
# little smaller if we do not support fieldwidthes
#
CONFIG_NOPRINTF_FIELDWIDTH=n
#
# Allow for architecture optimized implementations
#
# The architecture can provide optimized versions of the
# following to improve sysem performance
#
CONFIG_ARCH_MEMCPY=n
CONFIG_ARCH_MEMCMP=n
CONFIG_ARCH_MEMMOVE=n
CONFIG_ARCH_MEMSET=n
CONFIG_ARCH_STRCMP=n
CONFIG_ARCH_STRCPY=n
CONFIG_ARCH_STRNCPY=n
CONFIG_ARCH_STRLEN=n
CONFIG_ARCH_BZERO=n
CONFIG_ARCH_KMALLOC=n
CONFIG_ARCH_KZMALLOC=n
CONFIG_ARCH_KFREE=n
#
# General build options
#
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
# BSPs from www.ridgerun.com
#
CONFIG_RRLOAD_BINARY=y
#
# Sizes of configurable things (0 disables)
#
# CONFIG_MAX_TASKS - The maximum number of simultaneously
# active tasks. This value must be a power of two.
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
# of parameters that a task may receive (i.e., maxmum value
# of 'argc')
# CONFIG_NPTHREAD_KEYS - The number of items of thread-
# specific data that can be retained
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
# descriptors (one for each open)
# CONFIG_NFILE_STREAMS - The maximum number of streams that
# can be fopen'ed
# CONFIG_NAME_MAX - The maximum size of a file name.
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
# CONFIG_NUNGET_CHARS - Number of characters that can be
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
# structures. The system manages a pool of preallocated
# message structures to minimize dynamic allocations
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
# a fixed payload size given by this settin (does not include
# other message structure overhead.
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
# can be passed to a watchdog handler
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
# structures. The system manages a pool of preallocated
# watchdog structures to minimize dynamic allocations
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
# timer structures. The system manages a pool of preallocated
# timer structures to minimize dynamic allocations. Set to
# zero for all dynamic allocations.
#
CONFIG_MAX_TASKS=64
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=32
CONFIG_NFILE_STREAMS=16
CONFIG_NAME_MAX=32
CONFIG_STDIO_BUFFER_SIZE=1024
CONFIG_NUNGET_CHARS=2
CONFIG_PREALLOC_MQ_MSGS=32
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=4
CONFIG_PREALLOC_WDOGS=32
CONFIG_PREALLOC_TIMERS=8
#
# TCP/IP and UDP support via uIP
# CONFIG_NET - Enable or disable all network features
# CONFIG_NET_IPv6 - Build in support for IPv6
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
# CONFIG_NET_BUFSIZE - uIP buffer size
# CONFIG_NET_TCP - TCP support on or off
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
# CONFIG_NET_UDP - UDP support on or off
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
# CONFIG_NET_ICMP - ICMP ping support on or off
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
# CONFIG_NET_STATISTICS - uIP statistics on or off
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
# CONFIG_NET_BROADCAST - Broadcast support
# CONFIG_NET_LLH_LEN - The link level header length
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
CONFIG_NET=n
CONFIG_NET_IPv6=n
CONFIG_NSOCKET_DESCRIPTORS=0
CONFIG_NET_SOCKOPTS=y
CONFIG_NET_BUFSIZE=420
CONFIG_NET_TCP=n
CONFIG_NET_TCP_CONNS=40
CONFIG_NET_MAX_LISTENPORTS=40
CONFIG_NET_UDP=n
CONFIG_NET_UDP_CHECKSUMS=y
#CONFIG_NET_UDP_CONNS=10
CONFIG_NET_ICMP=n
#CONFIG_NET_PINGADDRCONF=0
CONFIG_NET_STATISTICS=y
#CONFIG_NET_RECEIVE_WINDOW=
#CONFIG_NET_ARPTAB_SIZE=8
CONFIG_NET_BROADCAST=n
#CONFIG_NET_LLH_LEN=14
#CONFIG_NET_FWCACHE_SIZE=2
#
# UIP Network Utilities
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
CONFIG_NET_DHCP_LIGHT=n
CONFIG_NET_RESOLV_ENTRIES=4
#
# Settings for examples/uip
CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
CONFIG_EXAMPLE_UIP_SMTP=n
CONFIG_EXAMPLE_UIP_TELNETD=n
CONFIG_EXAMPLE_UIP_WEBSERVER=y
CONFIG_EXAMPLE_UIP_DHCPC=n
CONFIG_EXAMPLE_UIP_WEBCLIENT=n
#
# Settings for examples/nettest
CONFIG_EXAMPLE_NETTEST_SERVER=n
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
#
# Settings for examples/nsh
CONFIG_EXAMPLES_NSH_TELNET=n
CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
CONFIG_EXAMPLES_NSH_CMD_SIZE=40
CONFIG_EXAMPLES_NSH_STACKSIZE=4096
CONFIG_EXAMPLES_NSH_DHCPC=n
CONFIG_EXAMPLES_NSH_NOMAC=n
CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
#
# C5471 Ethernet Driver settings
CONFIG_C5471_NET_STATS=n
ETHERNET_PHY_LU3X31T_T64=1
ETHERNET_PHY_AC101L=2
CONFIG_C5471_ETHERNET_PHY=ETHERNET_PHY_LU3X31T_T64
CONFIG_NET_C5471_AUTONEGOTIATION=y
CONFIG_NET_C5471_BASET100=n
CONFIG_NET_C5471_BASET10=n
#
# Stack and heap information
#
# CONFIG_BOOT_FROM_FLASH - Some configurations support XIP
# operation from FLASH.
# CONFIG_CUSTOM_STACK - The up_ implementation will handle
# all stack operations outside of the nuttx model.
# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
# CONFIG_PROC_STACK_SIZE - The size of the initial stack
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
# CONFIG_HEAP_BASE - The beginning of the heap
# CONFIG_HEAP_SIZE - The size of the heap
#
CONFIG_BOOT_FROM_FLASH=n
CONFIG_CUSTOM_STACK=n
CONFIG_STACK_POINTER=
CONFIG_PROC_STACK_SIZE=4096
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=4096
CONFIG_HEAP_BASE=
CONFIG_HEAP_SIZE=
