|
|
/****************************************************************************
* config/ea3131/src/up_nsh.c
* arch/arm/src/board/up_nsh.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#ifdef CONFIG_LPC31XX_MCI
# include <nuttx/sdio.h>
# include <nuttx/mmcsd.h>
#endif
#include "lpc31_internal.h"
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* PORT and SLOT number probably depend on the board configuration */
#ifdef CONFIG_ARCH_BOARD_EA3131
# define CONFIG_NSH_HAVEUSBDEV 1
# define CONFIG_NSH_HAVEMMCSD 1
# if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != 0
# error "Only one MMC/SD slot"
# undef CONFIG_NSH_MMCSDSLOTNO
# endif
# ifndef CONFIG_NSH_MMCSDSLOTNO
# define CONFIG_NSH_MMCSDSLOTNO 0
# endif
#else
/* Add configuration for new LPC31XX boards here */
# error "Unrecognized LPC31XX board"
# undef CONFIG_NSH_HAVEUSBDEV
# undef CONFIG_NSH_HAVEMMCSD
#endif
/* Can't support USB features if USB is not enabled */
#ifndef CONFIG_USBDEV
# undef CONFIG_NSH_HAVEUSBDEV
#endif
/* Can't support MMC/SD features if mountpoints are disabled or if SDIO support
* is not enabled.
*/
#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC31XX_MCI)
# undef CONFIG_NSH_HAVEMMCSD
#endif
#ifndef CONFIG_NSH_MMCSDMINOR
# define CONFIG_NSH_MMCSDMINOR 0
#endif
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# define message(...) lib_lowprintf(__VA_ARGS__)
# else
# define message(...) printf(__VA_ARGS__)
# endif
#else
# ifdef CONFIG_DEBUG
# define message lib_lowprintf
# else
# define message printf
# endif
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization
*
****************************************************************************/
int nsh_archinitialize(void)
{
#ifdef CONFIG_NSH_HAVEMMCSD
FAR struct sdio_dev_s *sdio;
int ret;
/* First, get an instance of the SDIO interface */
message("nsh_archinitialize: Initializing SDIO slot %d\n",
CONFIG_NSH_MMCSDSLOTNO);
sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO);
if (!sdio)
{
message("nsh_archinitialize: Failed to initialize SDIO slot %d\n",
CONFIG_NSH_MMCSDSLOTNO);
return -ENODEV;
}
/* Now bind the SPI interface to the MMC/SD driver */
message("nsh_archinitialize: Bind SDIO to the MMC/SD driver, minor=%d\n",
CONFIG_NSH_MMCSDMINOR);
ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, sdio);
if (ret != OK)
{
message("nsh_archinitialize: Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
return ret;
}
message("nsh_archinitialize: Successfully bound SDIO to the MMC/SD driver\n");
/* Then let's guess and say that there is a card in the slot. I need to check to
* see if the LPC313X10E-EVAL board supports a GPIO to detect if there is a card in
* the slot.
*/
sdio_mediachange(sdio, true);
#endif
return OK;
}
|