|
|
/************************************************************************************
* configs/eagle100/src/up_ethernet.c
* arch/arm/src/board/up_ethernet.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <debug.h>
#include <assert.h>
#include <arch/board/board.h>
#include <net/ethernet.h>
#include "up_arch.h"
#include "chip.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: lm3s_ethernetmac
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_LM3S_BOARDMAC
void lm3s_ethernetmac(struct ether_addr *ethaddr)
{
uint32 user0;
uint32 user1;
/* Get the current value of the user registers */
user0 = getreg32(LM3S_FLASH_USERREG0);
user1 = getreg32(LM3S_FLASH_USERREG1);
nlldbg("user: %06x:%06x\n", user1 & 0x00ffffff, user0 & 0x00ffffff);
DEBUGASSERT(user0 != 0xffffffff && user1 != 0xffffffff);
/* Re-format that MAC address the way that uIP expects to see it */
ethaddr->ether_addr_octet[0] = ((user0 >> 0) & 0xff);
ethaddr->ether_addr_octet[1] = ((user0 >> 8) & 0xff);
ethaddr->ether_addr_octet[2] = ((user0 >> 16) & 0xff);
ethaddr->ether_addr_octet[3] = ((user1 >> 0) & 0xff);
ethaddr->ether_addr_octet[4] = ((user1 >> 8) & 0xff);
ethaddr->ether_addr_octet[5] = ((user1 >> 16) & 0xff);
}
#endif
|