|
|
/************************************************************************************
* configs/kwikstik-k40/src/kwikstik-internal.h
* arch/arm/src/board/kwikstik-internal.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_KWIKSTK_K40_SRC_KWIKSTIK_INTERNAL_H
#define __CONFIGS_KWIKSTK_K40_SRC_KWIKSTIK_INTERNAL_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
/************************************************************************************
* Definitions
************************************************************************************/
/* How many SPI modules does this chip support? The LM3S6918 supports 2 SPI
* modules (others may support more -- in such case, the following must be
* expanded).
*/
#if KINETIS_NSPI < 1
# undef CONFIG_KINETIS_SPI1
# undef CONFIG_KINETIS_SPI2
#elif KINETIS_NSPI < 2
# undef CONFIG_KINETIS_SPI2
#endif
/* KwikStik-K40 GPIOs ***************************************************************/
/* On-Board Connections
*
* ------------------- -------------------------- -------- -------------------
* FEATURE CONNECTION PORT/PIN PIN FUNCTION
* ------------------- -------------------------- -------- -------------------
* Audio Jack Output Audio Amp On PTE28 PTE28
* Audio Output DAC1_OUT DAC1_OUT
* Volume Up PTD10 PTD10
* Volume Down PTD11 PTD11
* Buzzer Audio Out PTA8 FTM1_CH0
* Microphone Microphone input PTA7 ADC0_SE10
* SD Card Slot SD Clock PTE2 SDHC0_DCLK
* SD Command PTE3 SDHC0_CMD
* SD Data0 PTD12 SDHC0_D4
* SD Data1 PTD13 SDHC0_D5
* SD Data2 PTD14 SDHC0_D6
* SD Data3 PTD15 SDHC0_D7
* SD Card Detect PTE27 PTE27
* SD Card On PTE6 PTE6
* Infrared Port IR Transmit PTE4 IR_TX
* IR Receive PTA13 CMP2_IN0
* Touch Pads E1 / Touch PTB0 TSI0_CH0
* E2 / Touch PTA4 TSI0_CH5
* E3 / Touch PTA24 PTA24
* E4 / Touch PTA25 PTA25
* E5 / Touch PTA26 PTA26
* E6 / Touch PTA27 PTA27
*/
#define GPIO_SD_CARDDETECT (GPIO_PULLUP | PIN_INT_BOTH | PIN_PORTE | PIN27)
#define GPIO_SD_CARDON (GPIO_HIGHDRIVE | GPIO_OUTPUT_ZER0 | PIN_PORTE | PIN6)
/* Connections via the General Purpose Tower Plug-in (TWRPI) Socket
* ------------------- -------------------------- -------- -------------------
* FEATURE CONNECTION PORT/PIN PIN FUNCTION
* ------------------- -------------------------- -------- -------------------
* General Purpose TWRPI AN0 (J8 Pin 8) ? ADC0_DP0/ADC1_DP3
* TWRPI Socket TWRPI AN1 (J8 Pin 9) ? ADC0_DM0/ADC1_DM3
* TWRPI AN2 (J8 Pin 12) ? ADC1_DP0/ADC0_DP3
* TWRPI ID0 (J8 Pin 17) ? ADC0_DP1
* TWRPI ID1 (J8 Pin 18) ? ADC0_DM1
* TWRPI I2C SCL (J9 Pin 3) PTC10 I2C1_SCL
* TWRPI I2C SDA (J9 Pin 4) PTC11 I2C1_SDA
* TWRPI SPI MISO (J9 Pin 9) PTB23 SPI2_SIN
* TWRPI SPI MOSI (J9 Pin 10) PTB22 SPI2_SOUT
* TWRPI SPI SS (J9 Pin 11) PTB20 SPI2_PCS0
* TWRPI SPI CLK (J9 Pin 12) PTB21 SPI2_SCK
* TWRPI GPIO0 (J9 Pin 15) PTC12 PTC12
* TWRPI GPIO1 (J9 Pin 16) PTB9 PTB9
* TWRPI GPIO2 (J9 Pin 17) PTB10 PTB10
* TWRPI GPIO3 (J9 Pin 18) PTC5 PTC5
* TWRPI GPIO4 (J9 Pin 19) PTA5 PTA5
*/
/* Connections via the Tower Primary Connector Side A
* --- -------------------- --------------------------------
* PIN NAME USAGE
* --- -------------------- --------------------------------
* A9 GPIO9 / CTS1 PTE10/UART_CTS
* A43 RXD1 PTE9/UART_RX
* A44 TXD1 PTE8/UART_TX
* A63 RSTOUT_b PTA9/FTM1_CH1
*/
/* Connections via the Tower Primary Connector Side B
* --- -------------------- --------------------------------
* PIN NAME USAGE
* --- -------------------- --------------------------------
* B21 GPIO1 / RTS1 PTE7/UART_RTS
* B37 PWM7 PTA8/FTM1_CH0
* B38 PWM6 PTA9/FTM1_CH1
* B41 CANRX0 PTE25/CAN1_RX
* B42 CANTX0 PTE24/CAN1_TX
* B44 SPI0_MISO PTA17/SPI0_SIN
* B45 SPI0_MOSI PTA16/SPI0_SOUT
* B46 SPI0_CS0_b PTA14/SPI0_PCS0
* B48 SPI0_CLK PTA15/SPI0_SCK
* B50 SCL1 PTE1/I2C1_SCL
* B51 SDA1 PTE0/I2C1_SDA
* B52 GPIO5 / SD_CARD_DET PTA16
*/
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public data
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: up_ledinit
*
* Description:
* Initialize LED GPIOs so that LEDs can be controlled.
*
************************************************************************************/
#ifdef CONFIG_ARCH_LEDS
extern void up_ledinit(void);
#endif
/************************************************************************************
* Name: kinetis_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the KwikStik-K40 board.
*
************************************************************************************/
extern void weak_function kinetis_spiinitialize(void);
/************************************************************************************
* Name: kinetis_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins for the KwikStik-K40 board.
*
************************************************************************************/
extern void weak_function kinetis_usbinitialize(void);
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_KWIKSTK_K40_SRC_KWIKSTIK_INTERNAL_H */
|
