|
|
/************************************************************************************
* configs/lm4f120-launchpad/src/lmf4120-launchpad.h
* arch/arm/src/board/lmf4120-launchpad.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_LM4F120_LAUNCHPAD_LM4F120_LAUNCHPAD_H
#define __CONFIGS_LM4F120_LAUNCHPAD_LM4F120_LAUNCHPAD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include "chip.h"
#include "lm_gpio.h"
/************************************************************************************
* Definitions
************************************************************************************/
/* How many SSI modules does this chip support? The LM3S6965 supports 1 SSI
* module (others may support more than 2 -- in such case, the following must be
* expanded).
*/
#if LM_NSSI < 1
# undef CONFIG_SSI0_DISABLE
# define CONFIG_SSI0_DISABLE 1
# undef CONFIG_SSI1_DISABLE
# define CONFIG_SSI1_DISABLE 1
#elif LM_NSSI < 2
# undef CONFIG_SSI1_DISABLE
# define CONFIG_SSI1_DISABLE 1
#endif
/* LM4F LaunchPad *******************************************************************/
/* The LM4F120 LaunchPad has a single RGB LED. There is only one visible LED which
* will vary in color. But, from the standpoint of the firmware, this appears as
* three LEDs:
*
* BOARD_LED_R -- Connected to PF1
* BOARD_LED_G -- Connected to PF3
* BOARD_LED_B -- Connected to PF2
*
* If CONFIG_ARCH_LEDS is defined, then automated support for the LaunchPad LEDs
* will be included in the build:
*
* OFF:
* - OFF means that the OS is still initializing. Initialization is very fast so
* if you see this at all, it probably means that the system is hanging up
* somewhere in the initialization phases.
*
* GREEN or GREEN-ish
* - This means that the OS completed initialization.
*
* Bluish:
* - Whenever and interrupt or signal handler is entered, the BLUE LED is
* illuminated and extinguished when the interrupt or signal handler exits.
* This will add a BLUE-ish tinge to the LED.
*
* Redish:
* - If a recovered assertion occurs, the RED component will be illuminated
* briefly while the assertion is handled. You will probably never see this.
*
* Flashing RED:
* - In the event of a fatal crash, the BLUE and GREEN components will be
* extinguished and the RED component will FLASH at a 2Hz rate.
*
* RED GREEN BLUE
* LED_STARTED 0 OFF OFF OFF
* LED_HEAPALLOCATE 0 OFF OFF OFF
* LED_IRQSENABLED 0 OFF OFF OFF
* LED_STACKCREATED 1 OFF ON OFF
* LED_INIRQ 2 NC NC ON (momentary)
* LED_SIGNAL 2 NC NC ON (momentary)
* LED_ASSERTION 3 ON NC NC (momentary)
* LED_PANIC 3 ON OFF OFF (flashing 2Hz)
*/
#define GPIO_LED_R (GPIO_FUNC_OUTPUT | GPIO_VALUE_ONE | GPIO_PORTF | GPIO_PIN_1)
#define GPIO_LED_G (GPIO_FUNC_OUTPUT | GPIO_VALUE_ONE | GPIO_PORTF | GPIO_PIN_3)
#define GPIO_LED_B (GPIO_FUNC_OUTPUT | GPIO_VALUE_ONE | GPIO_PORTF | GPIO_PIN_2)
/* The LM4F120 LaunchPad has a two buttons:
*
* BOARD_SW1 -- Connected to PF4
* BOARD_SW2 -- Connected to PF0
*/
#define GPIO_SW1 (GPIO_FUNC_INTERRUPT | GPIO_INT_BOTHEDGES | GPIO_PORTF | GPIO_PIN_1)
#define GPIO_SW2 (GPIO_FUNC_INTERRUPT | GPIO_INT_BOTHEDGES | GPIO_PORTF | GPIO_PIN_1)
/************************************************************************************
* Public Functions
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Name: lm4f_ssiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the LM4F LaunchPad.
*
************************************************************************************/
void weak_function lm4f_ssiinitialize(void);
/****************************************************************************
* Name: lm4f_ledinit
*
* Description:
* Called to initialize the on-board LEDs.
*
****************************************************************************/
#ifdef CONFIG_ARCH_LEDS
void lm4f_ledinit(void);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_LM4F120_LAUNCHPAD_LM4F120_LAUNCHPAD_H */
|
