README
======
This README file discusses the port of NuttX to the MT-DB-X3 development
board from MattairTech. This board may host a variety of 64-pin AVR XMega
part. This port was specifically performed using the ATXmega384c3.
See the MattairTech website for further information about the MT-DB-X3:
http://www.mattairtech.com/.
NOTE: There is no port for the XMEGA in place as of this writing. At this
point in time, this README file is only a repository for pre-porting
information. It is not clear as of this writing whether there ever will
be a port to the MT-DB-X3 development board or not.
Contents
========
- PIO Usage
- LEDs and Buttons
- Serial Console
- Configurations
PIO Usage
=========
PA0 CONN_P_10 pin 1, Aref via J34
PA1 CONN_P_10 pin 2
PA2 CONN_P_10 pin 3
PA3 CONN_P_10 pin 4
PA4 CONN_P_10 pin 5
PA5 CONN_P_10 pin 6
PA6 CONN_P_10 pin 7
PA7 CONN_P_10 pin 8
PB0 CONN_P_10 pin 9, Aref via J25
PB1 CONN_P_10 pin 10
PB2 C4_LS CONN_P14 pin 5
PB3 C4_LS CONN_P14 pin 5
PB4 C4_LS CONN_P14 pin 5, Alt JTAG TMS
PB5 C4_LS CONN_P14 pin 5, Alt JTAG TDI
PB6 C4_LS CONN_P14 pin 5, Alt JTAG TCK
PB7 C4_LS CONN_P14 pin 5, Alt JTAG TDO, Voltage measurement via J15
PC0 C0_LS CONN_P14 pin 7
PC1 C1_LS CONN_P14 pin 8
PC2 C2_LS CONN_P14 pin 9
PC3 C3_LS CONN_P14 pin 10
PC4 C4_LS CONN_P14 pin 5, PDI/SPI Header pin 5 via J8
PC5 C5_LS CONN_P14 pin 6, PDI/SPI Header pin 4 via J8
PC6 C6_LS CONN_P14 pin 7, PDI/SPI Header pin 1 via J13
PC7 C7_LS CONN_P14 pin 8, PDI/SPI Header pin 3 via J12
PD0 CONN_P14 pin 9
PD1 CONN_P14 pin 10
PD2 CONN_P14 pin 11
PD3 CONN_P14 pin 12
PD4 CONN_P14 pin 13
PD5 CONN_P14 pin 14, TXB0103 Output Enable
PD6 CONN_P14 pin 12, USB D-
PD7 CONN_P14 pin 13, USB D+
PE0 CONN_P10 pin 1
PE1 CONN_P10 pin 2
PE2 CONN_P10 pin 3
PE3 CONN_P10 pin 4
PE4 CONN_P10 pin 5
PE5 CONN_P10 pin 6
PE6 CONN_P10 pin 7, TOSC1 via J28
PE7 CONN_P10 pin 8, TOSC1 via J29
PF0 PORT F pin 1
PF1 PORT F pin 2
PF2 PORT F pin 3
PF3 PORT F pin 4
PF4 PORT F pin 5, Bootloader jumper
PF5 PORT F pin 6
PF6 PORT F pin 7, Green LED via J31
PF7 PORT F pin 8, User button via J33 (otherwise reset)
LEDs and Buttons
================
Serial Console
==============
Configurations
==============
