/****************************************************************************
* config/shenzhou/src/up_mmcsd.c
* arch/arm/src/board/up_mmcsd.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/spi.h>
#include <nuttx/mmcsd.h>
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* SPI1 connects to the SD CARD (and to the SPI FLASH) */
#define HAVE_MMCSD 1 /* Assume that we have SD support */
#define STM32_MMCSDSPIPORTNO 1 /* Port is SPI1 */
#define STM32_MMCSDSLOTNO 0 /* There is only one slot */
#ifndef CONFIG_STM32_SPI1
# undef HAVE_MMCSD
#else
# ifdef CONFIG_SPI_OWNBUS
# warning "SPI1 is shared with SD and FLASH but CONFIG_SPI_OWNBUS is defined"
# endif
#endif
/* Can't support MMC/SD features if mountpoints are disabled */
#ifndef CONFIG_DISABLE_MOUNTPOINT
# undef NSH_HAVEMMCSD
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: stm32_sdinitialize
*
* Description:
* Initialize the SPI-based SD card. Requires CONFIG_DISABLE_MOUNTPOINT=n
* and CONFIG_STM32_SPI1=y
*
****************************************************************************/
int stm32_sdinitialize(int minor)
{
#ifdef HAVE_MMCSD
FAR struct spi_dev_s *spi;
int ret;
/* Get the SPI port */
fvdbg("Initializing SPI port %d\n", STM32_MMCSDSPIPORTNO);
spi = up_spiinitialize(STM32_MMCSDSPIPORTNO);
if (!spi)
{
fdbg("Failed to initialize SPI port %d\n", STM32_MMCSDSPIPORTNO);
return -ENODEV;
}
fvdbg("Successfully initialized SPI port %d\n", STM32_MMCSDSPIPORTNO);
/* Bind the SPI port to the slot */
fvdbg("Binding SPI port %d to MMC/SD slot %d\n",
STM32_MMCSDSPIPORTNO, STM32_MMCSDSLOTNO);
ret = mmcsd_spislotinitialize(minor, STM32_MMCSDSLOTNO, spi);
if (ret < 0)
{
fdbg("Failed to bind SPI port %d to MMC/SD slot %d: %d\n",
STM32_MMCSDSPIPORTNO, STM32_MMCSDSLOTNO, ret);
return ret;
}
fvdbg("Successfuly bound SPI port %d to MMC/SD slot %d\n",
STM32_MMCSDSPIPORTNO, STM32_MMCSDSLOTNO);
#endif
return OK;
}