/************************************************************************************
* configs/ubw32/src/up_usbdev.c
* arch/arm/src/board/up_usbdev.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/usb/usbdev.h>
#include "pic32mx-internal.h"
#include "ubw32-internal.h"
#if defined(CONFIG_PIC32MX_USBDEV)
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: pic32mx_usbdevinitialize
*
* Description:
* Called to configure the mini-A/B J5 on the UBW32 for the
* USB device
*
************************************************************************************/
void weak_function pic32mx_usbdevinitialize(void)
{
/* Notes from the Sure Electronics sample code:
*
* "The USB specifications require that USB peripheral devices must never source
* current onto the Vbus pin. Additionally, USB peripherals should not source
* current on D+ or D- when the host/hub is not actively powering the Vbus line.
* When designing a self powered (as opposed to bus powered) USB peripheral
* device, the firmware should make sure not to turn on the USB module and D+
* or D- pull up resistor unless Vbus is actively powered. Therefore, the
* firmware needs some means to detect when Vbus is being powered by the host.
* A 5V tolerant I/O pin can be connected to Vbus (through a resistor), and
* can be used to detect when Vbus is high (host actively powering), or low
* (host is shut down or otherwise not supplying power). The USB firmware
* can then periodically poll this I/O pin to know when it is okay to turn on
* the USB module/D+/D- pull up resistor. When designing a purely bus powered
* peripheral device, it is not possible to source current on D+ or D- when the
* host is not actively providing power on Vbus. Therefore, implementing this
* bus sense feature is optional. ..."
*/
#ifdef CONFIG_USBHOST
#endif
/* "If the host PC sends a GetStatus (device) request, the firmware must respond
* and let the host know if the USB peripheral device is currently bus powered
* or self powered. See chapter 9 in the official USB specifications for details
* regarding this request. If the peripheral device is capable of being both
* self and bus powered, it should not return a hard coded value for this request.
* Instead, firmware should check if it is currently self or bus powered, and
* respond accordingly. If the hardware has been configured like demonstrated
* on the PICDEM FS USB Demo Board, an I/O pin can be polled to determine the
* currently selected power source. ..."
*/
#ifdef CONFIG_USB_PWRSENSE
#endif
}
/************************************************************************************
* Name: pic32mx_usbpullup
*
* Description:
* If USB is supported and the board supports a pullup via GPIO (for USB
* software connect and disconnect), then the board software must provide
* stm32_pullup. See include/nuttx/usb/usbdev.h for additional description
* of this method. Alternatively, if no pull-up GPIO the following EXTERN
* can be redefined to be NULL.
*
************************************************************************************/
int pic32mx_usbpullup(FAR struct usbdev_s *dev, bool enable)
{
/* The UBW32 does not have a USB pull-up */
return OK;
}
/************************************************************************************
* Name: pic32mx_usbsuspend
*
* Description:
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver
* is used. This function is called whenever the USB enters or leaves
* suspend mode. This is an opportunity for the board logic to shutdown
* clocks, power, etc. while the USB is suspended.
*
************************************************************************************/
void pic32mx_usbsuspend(FAR struct usbdev_s *dev, bool resume)
{
/* Do nothing */
}
#endif /* CONFIG_PIC32MX_USBDEV */
