/****************************************************************************
* configs/us7032evb1/src/up_leds.c
*
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
/****************************************************************************
* Definitions
****************************************************************************/
/* The SH1_LPEVB only a single LED controlled by either port A, pin 15, or
* port B, pin 15 (selectable via JP8). In this file, we assume the portB
* setup.
*/
#define SH1_PBDR_LED 0x8000
#define SH1_PBIOR_LED 0x8000
#define SH1_PBCR2_LED 0xc000
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_ledinit
****************************************************************************/
#ifdef CONFIG_ARCH_LEDS
void up_ledinit(void)
{
uint16 reg16;
/* Setup port B, pin 15 as an output */
reg16 = getreg16(SH1_PFC_PBIOR);
reg16 |= SH1_PBIOR_LED;
putreg16(reg16, SH1_PFC_PBIOR);
/* Setup port B, pin 15 as a normal I/O register */
reg16 = getreg16(SH1_PFC_PBCR1);
reg16 &= ~SH1_PBCR2_LED;
putreg16(reg16, SH1_PFC_PBCR1);
/* Turn the LED off */
reg16 = getreg16(SH1_PORTB_DR);
reg16 &= ~SH1_PBDR_LED;
putreg16(reg16, SH1_PORTB_DR);
}
/****************************************************************************
* Name: up_ledon
****************************************************************************/
void up_ledon(int led)
{
uint16 reg16;
if (led)
{
/* Turn the LED on */
reg16 = getreg16(SH1_PORTB_DR);
reg16 |= SH1_PBDR_LED;
putreg16(reg16, SH1_PORTB_DR);
}
}
/****************************************************************************
* Name: up_ledoff
****************************************************************************/
void up_ledoff(int led)
{
uint16 reg16;
if (led)
{
/* Turn the LED off */
reg16 = getreg16(SH1_PORTB_DR);
reg16 &= ~SH1_PBDR_LED;
putreg16(reg16, SH1_PORTB_DR);
}
}
#endif /* CONFIG_ARCH_LEDS */
