/****************************************************************************
* net/accept.c
*
* Copyright (C) 2007 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#if defined(CONFIG_NET) && CONFIG_NSOCKET_DESCRIPTORS > 0
#include <sys/types.h>
#include <sys/socket.h>
#include <semaphore.h>
#include <string.h>
#include <errno.h>
#include <arch/irq.h>
#include "net-internal.h"
/****************************************************************************
* Private Types
****************************************************************************/
struct accept_s
{
sem_t acpt_sem; /* Wait for interrupt event */
#ifdef CONFIG_NET_IPv6
FAR const struct sockaddr_in6 *acpt_addr; /* Return connection adress */
#else
FAR const struct sockaddr_in *acpt_addr; /* Return connection adress */
#endif
FAR struct uip_conn *acpt_listenconn; /* The listener connection */
FAR struct uip_conn *acpt_newconn; /* The accepted connection */
int acpt_result; /* The result of the wait */
};
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Function: accept_interrupt
*
* Description:
* Receive interrupt level callbacks when connections occur
*
****************************************************************************/
static int accept_interrupt(void *private, struct uip_conn *conn)
{
struct accept_s *pstate = (struct accept_s *)private;
int ret = -EINVAL;
if (pstate)
{
/* Get the connection address */
#warning "need to return the address of the connection"
/* Save the connection structure */
pstate->acpt_newconn = conn;
pstate->acpt_result = OK;
sem_post(&pstate->acpt_sem);
/* Stop any further callbacks */
pstate->acpt_listenconn->accept_private = NULL;
pstate->acpt_listenconn->accept = NULL;
ret = OK;
}
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Function: accept
*
* Description:
* The accept function is used with connection-based socket types
* (SOCK_STREAM, SOCK_SEQPACKET and SOCK_RDM). It extracts the first
* connection request on the queue of pending connections, creates a new
* connected socket with mostly the same properties as 'sockfd', and
* allocates a new socket descriptor for the socket, which is returned. The
* newly created socket is no longer in the listening state. The original
* socket 'sockfd' is unaffected by this call. Per file descriptor flags
* are not inherited across an accept.
*
* The 'sockfd' argument is a socket descriptor that has been created with
* socket(), bound to a local address with bind(), and is listening for
* connections after a call to listen().
*
* On return, the 'addr' structure is filled in with the address of the
* connecting entity. The 'addrlen' argument initially contains the size
* of the structure pointed to by 'addr'; on return it will contain the
* actual length of the address returned.
*
* If no pending connections are present on the queue, and the socket is
* not marked as non-blocking, accept blocks the caller until a connection
* is present. If the socket is marked non-blocking and no pending
* connections are present on the queue, accept returns EAGAIN.
*
* Parameters:
* sockfd The listening socket descriptior
* addr Receives the address of the connecting client
* addrlen Input: allocated size of 'addr', Return: returned size of 'addr'
*
* Returned Value:
* Returns -1 on error. If it succeeds, it returns a non-negative integer
* that is a descriptor for the accepted socket.
*
* EAGAIN or EWOULDBLOCK
* The socket is marked non-blocking and no connections are present to
* be accepted.
* EBADF
* The descriptor is invalid.
* ENOTSOCK
* The descriptor references a file, not a socket.
* EOPNOTSUPP
* The referenced socket is not of type SOCK_STREAM.
* EINTR
* The system call was interrupted by a signal that was caught before
* a valid connection arrived.
* ECONNABORTED
* A connection has been aborted.
* EINVAL
* Socket is not listening for connections.
* EMFILE
* The per-process limit of open file descriptors has been reached.
* ENFILE
* The system maximum for file descriptors has been reached.
* EFAULT
* The addr parameter is not in a writable part of the user address
* space.
* ENOBUFS or ENOMEM
* Not enough free memory.
* EPROTO
* Protocol error.
* EPERM
* Firewall rules forbid connection.
*
* Assumptions:
*
****************************************************************************/
int accept(int sockfd, struct sockaddr *addr, socklen_t *addrlen)
{
FAR struct socket *psock = sockfd_socket(sockfd);
FAR struct socket *pnewsock;
FAR struct uip_conn *conn;
struct accept_s state;
#ifdef CONFIG_NET_IPv6
FAR const struct sockaddr_in6 *inaddr = (const struct sockaddr_in6 *)addr;
#else
FAR const struct sockaddr_in *inaddr = (const struct sockaddr_in *)addr;
#endif
irqstate_t save;
int newfd;
int err;
int ret;
/* Verify that the sockfd corresponds to valid, allocated socket */
if (!psock || psock->s_crefs <= 0)
{
/* It is not a valid socket description. Distinguish between the cases
* where sockfd is a just valid and when it is a valid file descriptor used
* in the wrong context.
*/
#if CONFIG_NFILE_DESCRIPTORS > 0
if ((unsigned int)sockfd < CONFIG_NFILE_DESCRIPTORS)
{
err = ENOTSOCK;
}
else
#endif
{
err = EBADF;
}
goto errout;
}
/* We have a socket descriptor, but it is a stream? */
if (psock->s_type != SOCK_STREAM)
{
err = EOPNOTSUPP;
goto errout;
}
/* Is the socket listening for a connection? */
if (!_SS_ISLISTENING(psock->s_flags))
{
err = EINVAL;
goto errout;
}
/* Verify that a valid memory block has been provided to receive the address address */
#ifdef CONFIG_NET_IPv6
if (addr->sa_family != AF_INET6 || *addrlen < sizeof(struct sockaddr_in6))
#else
if (addr->sa_family != AF_INET || *addrlen < sizeof(struct sockaddr_in))
#endif
{
err = EBADF;
goto errout;
}
/* Allocate a socket descriptor for the new connection now (so that it cannot fail later) */
newfd = sockfd_allocate();
if (newfd < 0)
{
err = ENFILE;
goto errout;
}
pnewsock = sockfd_socket(newfd);
if (newfd)
{
err = ENFILE;
goto errout_with_socket;
}
/* Set the socket state to accepting */
psock->s_flags = _SS_SETSTATE(psock->s_flags, _SF_ACCEPT);
/* Perform the TCP accept operation */
/* Initialize the state structure. This is done with interrupts
* disabled because we don't want anything to happen until we
* are ready.
*/
save = irqsave();
state.acpt_addr = inaddr;
state.acpt_listenconn = psock->s_conn;
state.acpt_newconn = NULL;
state.acpt_result = OK;
/* Set up the callback in the connection */
conn = (struct uip_conn *)psock->s_conn;
conn->accept_private = (void*)&state;
conn->accept = accept_interrupt;
/* Wait for the send to complete or an error to occur: NOTES: (1)
* sem_wait will also terminate if a signal is received, (2) interrupts
* are disabled! They will be re-enabled while the task sleeps and
* automatically re-enabled when the task restarts.
*/
ret = sem_wait(&state. acpt_sem);
/* Make sure that no further interrupts are processed */
conn->accept_private = NULL;
conn->accept = NULL;
sem_destroy(&state. acpt_sem);
irqrestore(save);
/* Set the socket state to idle */
psock->s_flags = _SS_SETSTATE(psock->s_flags, _SF_IDLE);
/* Check for a errors. Errors are signaled by negative errno values
* for the send length
*/
if (state.acpt_result != 0)
{
err = state.acpt_result;
goto errout_with_socket;
}
/* If sem_wait failed, then we were probably reawakened by a signal. In
* this case, sem_wait will have set errno appropriately.
*/
if (ret < 0)
{
err = -ret;
goto errout_with_socket;
}
/* Initialize the socket structure */
pnewsock->s_type = SOCK_STREAM;
pnewsock->s_conn = state.acpt_newconn;
return newfd;
errout_with_socket:
sockfd_release(newfd);
errout:
*get_errno_ptr() = err;
return ERROR;
}
#endif /* CONFIG_NET && CONFIG_NSOCKET_DESCRIPTORS */