Add FAT long filename support to the Olimex LPC1766-STK NSH and FTPC configuration

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4248 42af7a65-404d-4744-a932-0658087f49c3

15 files changed, 541 insertions, 30 deletions

diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index b84bc3600..a85d9b37b 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -2300,7 +2300,7 @@
 
 6.14 2012-xx-xx Gregory Nutt <gnutt@nuttx.org>
 
-	* tools/Makefile.txport, mkexport.sh, and configure.sh:  Changes submitted
+	* tools/Makefile.export, mkexport.sh, and configure.sh:  Changes submitted
 	  by Mike Smith to support configuration and 'make export' on MAC OS.
 	* arch/arm/src/stm32/stm32_gpio.c:  Disabled interrupts while configuring
 	  GPIO pins so that we have exclusive access to the GPIO configuration
diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html
index 9a9b5756c..be0d3c9c2 100644
--- a/nuttx/Documentation/NuttX.html
+++ b/nuttx/Documentation/NuttX.html
@@ -8,7 +8,7 @@
   <tr align="center" bgcolor="#e4e4e4">
     <td>
       <h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1>
-      <p>Last Updated: December 26, 2011</p>
+      <p>Last Updated: January 1, 2012</p>
     </td>
   </tr>
 </table>
@@ -2773,8 +2773,36 @@ buildroot-1.10 2011-05-06 &lt;gnutt@nuttx.org&gt;
 <ul><pre>
 nuttx-6.14 2012-xx-xx Gregory Nutt &lt;gnutt@nuttx.org&gt;
 
+    * tools/Makefile.export, mkexport.sh, and configure.sh:  Changes submitted
+      by Mike Smith to support configuration and 'make export' on MAC OS.
+    * arch/arm/src/stm32/stm32_gpio.c:  Disabled interrupts while configuring
+      GPIO pins so that we have exclusive access to the GPIO configuration
+      registers.
+    * arch/mips/src/pic32mx/pic32mx_usbdev.c:  Add a USB device-side driver
+      for the PIC32MX family.
+    * arch/arm/src/stm32/stm32_gpio.c:  Correct an error in some of the GPIO
+      initialization logic.  Fix submitted by Mike Smith.
+    * configs/olimex-lpc1766stk/src/up_leds.c:  Add new interfaces so that is
+      CONFIG_ARCH_LEDS are not set, the LEDs may be controlled from application
+      logic.
+    * configs/olimex-lpc1766stk/src/up_buttons.c:  Add support form the buttons
+      on the Olimex LPC1766-STK board.
+    * Makefile:  Added 'apps_clean' and 'apps_distclean' target to simplify
+      managing the state of the application directory while in the NuttX directory
+    * Documentation/NuttXGettingStarted.html:  Added a "Getting Started" Guide
+      for NuttX.  At present, this is just a stub and it refers to the NuttX
+      top-level README.txt file which is the only, real "Getting Started" Guide
+      that exists at the time being.
+    * arch/arm/src/lpc17xx/lpc17_gpioint.c:  Correct an value used as the lower
+      end of an IRQ number range test.
+    * arch/arm/src/lpc17xx/lpc17_gpio.c:  Fix a integer flow problem in shift.
+      This error would prevent pins &gt; 15 from being used as interrupt sources.
+
 apps-6.14 2012-xx-xx Gregory Nutt &lt;gnutt@nuttx.org&gt;
 
+    * apps/examples/buttons/main.c:  The test needs to up_buttoninit() to
+      properly configure the button interrupt GPIOs.
+
 pascal-3.1 2012-xx-xx Gregory Nutt &lt;gnutt@nuttx.org&gt;
 
 buildroot-1.11 2012-xx-xx &lt;gnutt@nuttx.org&gt;
diff --git a/nuttx/configs/olimex-lpc1766stk/README.txt b/nuttx/configs/olimex-lpc1766stk/README.txt
index cb5fa168f..9edbfc513 100755
--- a/nuttx/configs/olimex-lpc1766stk/README.txt
+++ b/nuttx/configs/olimex-lpc1766stk/README.txt
@@ -812,12 +812,25 @@ Where <subdir> is one of the following:
     where xx.xx.xx.xx is the IP address of the FTP server and pp is an
     optional port number (default is the standard FTP port number 21).
 
-    You may also want to define the following in your configuration file.
-    Otherwise, you will have not feeback about what is going on:
+    NOTES:
+
+    1. Support for FAT long file names is built-in but can easily be
+       removed if you are concerned about Microsoft patent issues (see the
+       section "FAT Long File Names" in the top-level COPYING file).
+       
+       CONFIG_FS_FAT=y
+       CONFIG_FAT_LCNAMES=y <-- Long file name support
+       CONFIG_FAT_LFN=y
+       CONFIG_FAT_MAXFNAME=32
+       CONFIG_FS_NXFFS=n
+       CONFIG_FS_ROMFS=n
+
+    2. You may also want to define the following in your configuration file.
+       Otherwise, you will have not feedback about what is going on:
  
-      CONFIG_DEBUG=y
-      CONFIG_DEBUG_VERBOSE=y
-      CONFIG_DEBUG_FTPC=y
+       CONFIG_DEBUG=y
+       CONFIG_DEBUG_VERBOSE=y
+       CONFIG_DEBUG_FTPC=y
 
   hidkbd:
     This configuration directory, performs a simple test of the USB host
@@ -831,8 +844,7 @@ Where <subdir> is one of the following:
   nsh:
     Configures the NuttShell (nsh) located at apps/examples/nsh.  The
     Configuration enables both the serial and telnet NSH interfaces.
-    Support for the board's SPI-based MicroSD card is included
-    (but not passing tests as of this writing).
+    Support for the board's SPI-based MicroSD card is included.
 
     NOTE:  If you start the program with no SD card inserted, there will be
     a substantial delay. This is because there is no hardware support to sense
@@ -840,9 +852,37 @@ Where <subdir> is one of the following:
     go through many retries and timeouts before it finally decides that there
     is not SD card in the slot.
 
+    Configuration Notes:
+
+    1. Uses the buildroot toolchaing (CONFIG_LPC17_BUILDROOT=y).  But that is
+       easily reconfigured (see above)
+    2. Support for FAT long file names is built-in but can easily be
+       removed if you are concerned about Microsoft patent issues (see the
+       section "FAT Long File Names" in the top-level COPYING file).
+       
+        CONFIG_FS_FAT=y
+        CONFIG_FAT_LCNAMES=y <-- Long file name support
+        CONFIG_FAT_LFN=y
+        CONFIG_FAT_MAXFNAME=32
+        CONFIG_FS_NXFFS=n
+        CONFIG_FS_ROMFS=n
+
+    3. Includes logic to support a button test (apps/examples/buttons).  To
+       enable the button test, make the following changes in the .config
+       after configuring:
+
+       -CONFIG_ARCH_BUTTONS=n
+       +CONFIG_ARCH_BUTTONS=y
+
+       -CONFIG_GPIO_IRQ=n
+       -CONFIG_ARCH_IRQBUTTONS=n
+       +CONFIG_GPIO_IRQ=y
+       +CONFIG_ARCH_IRQBUTTONS=y
+
   nx:
-    And example using the NuttX graphics system (NX).  This example
-    uses the Nokia 6100 LCD driver.
+    An example using the NuttX graphics system (NX).  This example uses
+    the Nokia 6100 LCD driver. NOTE:  The Nokia 6100 driver does not
+    work on this board as of this writing.
 
   ostest:
     This configuration directory, performs a simple OS test using
diff --git a/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig b/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig
index ce92fb24b..5ea9ca17f 100755
--- a/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig
+++ b/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig
@@ -1,8 +1,8 @@
 ############################################################################
 # configs/olimex-lpc1766stk/ftpc/defconfig
 #
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -483,9 +483,49 @@ CONFIG_PREALLOC_TIMERS=8
 #
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
+#   file name support.
+# CONFIG_FAT_LFN - Enable FAT long file names.  NOTE:  Microsoft claims
+#   patents on FAT long file name technology.  Please read the
+#   disclaimer in the top-level COPYING file and only enable this
+#   feature if you understand these issues.
+# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
+#   default, maximum long file name is 255 bytes.  This can eat up
+#   a lot of memory (especially stack space).  If you are willing
+#   to live with some non-standard, short long file names, then
+#   define this value.  A good choice would be the same value as
+#   selected for CONFIG_NAME_MAX which will limit the visibility
+#   of longer file names anyway.
+# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
+# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. 
+#   This must have one of the values of 0xff or 0x00.
+#   Default: 0xff.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
+#   Default: 255.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+#   Default: 32.
+# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
+#   packing files together toward the end of the file or, if file are
+#   deleted at the end of the file, clean up can simply mean erasing
+#   the end of FLASH memory so that it can be re-used again.  However,
+#   doing this can also harm the life of the FLASH part because it can
+#   mean that the tail end of the FLASH is re-used too often. This
+#   threshold determines if/when it is worth erased the tail end of FLASH
+#   and making it available for re-use (and possible over-wear).
+#   Default: 8192.
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
+#   option will enable a limited form of memory mapping that is
+#   implemented by copying whole files into memory.
 #
 CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
 CONFIG_FS_ROMFS=n
 
 #
diff --git a/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig b/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig
index bdccfa411..e26511fa8 100755
--- a/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig
+++ b/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig
@@ -1,7 +1,7 @@
 ############################################################################
 # configs/olimex-lpc1766stk/hidkbd/defconfig
 #
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
 #   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
@@ -466,9 +466,49 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
+#   file name support.
+# CONFIG_FAT_LFN - Enable FAT long file names.  NOTE:  Microsoft claims
+#   patents on FAT long file name technology.  Please read the
+#   disclaimer in the top-level COPYING file and only enable this
+#   feature if you understand these issues.
+# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
+#   default, maximum long file name is 255 bytes.  This can eat up
+#   a lot of memory (especially stack space).  If you are willing
+#   to live with some non-standard, short long file names, then
+#   define this value.  A good choice would be the same value as
+#   selected for CONFIG_NAME_MAX which will limit the visibility
+#   of longer file names anyway.
+# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
+# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. 
+#   This must have one of the values of 0xff or 0x00.
+#   Default: 0xff.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
+#   Default: 255.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+#   Default: 32.
+# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
+#   packing files together toward the end of the file or, if file are
+#   deleted at the end of the file, clean up can simply mean erasing
+#   the end of FLASH memory so that it can be re-used again.  However,
+#   doing this can also harm the life of the FLASH part because it can
+#   mean that the tail end of the FLASH is re-used too often. This
+#   threshold determines if/when it is worth erased the tail end of FLASH
+#   and making it available for re-use (and possible over-wear).
+#   Default: 8192.
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
+#   option will enable a limited form of memory mapping that is
+#   implemented by copying whole files into memory.
 #
 CONFIG_FS_FAT=n
+CONFIG_FAT_LCNAMES=n
+CONFIG_FAT_LFN=n
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
 CONFIG_FS_ROMFS=n
 
 #
diff --git a/nuttx/configs/olimex-lpc1766stk/nettest/defconfig b/nuttx/configs/olimex-lpc1766stk/nettest/defconfig
index 89d1ad54a..5ba14173d 100755
--- a/nuttx/configs/olimex-lpc1766stk/nettest/defconfig
+++ b/nuttx/configs/olimex-lpc1766stk/nettest/defconfig
@@ -1,8 +1,8 @@
 ############################################################################
 # configs/olimex-lpc1766stk/nettest/defconfig
 #
-#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#   Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -466,9 +466,49 @@ CONFIG_PREALLOC_TIMERS=8
 #
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
+#   file name support.
+# CONFIG_FAT_LFN - Enable FAT long file names.  NOTE:  Microsoft claims
+#   patents on FAT long file name technology.  Please read the
+#   disclaimer in the top-level COPYING file and only enable this
+#   feature if you understand these issues.
+# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
+#   default, maximum long file name is 255 bytes.  This can eat up
+#   a lot of memory (especially stack space).  If you are willing
+#   to live with some non-standard, short long file names, then
+#   define this value.  A good choice would be the same value as
+#   selected for CONFIG_NAME_MAX which will limit the visibility
+#   of longer file names anyway.
+# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
+# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. 
+#   This must have one of the values of 0xff or 0x00.
+#   Default: 0xff.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
+#   Default: 255.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+#   Default: 32.
+# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
+#   packing files together toward the end of the file or, if file are
+#   deleted at the end of the file, clean up can simply mean erasing
+#   the end of FLASH memory so that it can be re-used again.  However,
+#   doing this can also harm the life of the FLASH part because it can
+#   mean that the tail end of the FLASH is re-used too often. This
+#   threshold determines if/when it is worth erased the tail end of FLASH
+#   and making it available for re-use (and possible over-wear).
+#   Default: 8192.
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
+#   option will enable a limited form of memory mapping that is
+#   implemented by copying whole files into memory.
 #
 CONFIG_FS_FAT=n
+CONFIG_FAT_LCNAMES=n
+CONFIG_FAT_LFN=n
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
 CONFIG_FS_ROMFS=n
 
 #
diff --git a/nuttx/configs/olimex-lpc1766stk/nsh/appconfig b/nuttx/configs/olimex-lpc1766stk/nsh/appconfig
index 7a2321613..a2f7f9f26 100644
--- a/nuttx/configs/olimex-lpc1766stk/nsh/appconfig
+++ b/nuttx/configs/olimex-lpc1766stk/nsh/appconfig
@@ -51,4 +51,7 @@ CONFIGURED_APPS += netutils/tftpc
 CONFIGURED_APPS += netutils/webclient
 endif
 
+ifeq ($(CONFIG_ARCH_BUTTONS),y)
+CONFIGURED_APPS += examples/buttons
+endif
 
diff --git a/nuttx/configs/olimex-lpc1766stk/nsh/defconfig b/nuttx/configs/olimex-lpc1766stk/nsh/defconfig
index 0b058f5b9..404e7c7f3 100755
--- a/nuttx/configs/olimex-lpc1766stk/nsh/defconfig
+++ b/nuttx/configs/olimex-lpc1766stk/nsh/defconfig
@@ -1,7 +1,7 @@
 ############################################################################
 # configs/olimex-lpc1766stk/nsh/defconfig
 #
-#   Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
 #   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
@@ -484,9 +484,49 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
+#   file name support.
+# CONFIG_FAT_LFN - Enable FAT long file names.  NOTE:  Microsoft claims
+#   patents on FAT long file name technology.  Please read the
+#   disclaimer in the top-level COPYING file and only enable this
+#   feature if you understand these issues.
+# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
+#   default, maximum long file name is 255 bytes.  This can eat up
+#   a lot of memory (especially stack space).  If you are willing
+#   to live with some non-standard, short long file names, then
+#   define this value.  A good choice would be the same value as
+#   selected for CONFIG_NAME_MAX which will limit the visibility
+#   of longer file names anyway.
+# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
+# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. 
+#   This must have one of the values of 0xff or 0x00.
+#   Default: 0xff.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
+#   Default: 255.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+#   Default: 32.
+# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
+#   packing files together toward the end of the file or, if file are
+#   deleted at the end of the file, clean up can simply mean erasing
+#   the end of FLASH memory so that it can be re-used again.  However,
+#   doing this can also harm the life of the FLASH part because it can
+#   mean that the tail end of the FLASH is re-used too often. This
+#   threshold determines if/when it is worth erased the tail end of FLASH
+#   and making it available for re-use (and possible over-wear).
+#   Default: 8192.
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
+#   option will enable a limited form of memory mapping that is
+#   implemented by copying whole files into memory.
 #
 CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
 CONFIG_FS_ROMFS=n
 
 #
diff --git a/nuttx/configs/olimex-lpc1766stk/nx/defconfig b/nuttx/configs/olimex-lpc1766stk/nx/defconfig
index 1bfe7e076..691d3a269 100755
--- a/nuttx/configs/olimex-lpc1766stk/nx/defconfig
+++ b/nuttx/configs/olimex-lpc1766stk/nx/defconfig
@@ -1,8 +1,8 @@
 ############################################################################
 # configs/olimex-lpc1766stk/nx/defconfig
 #
-#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#   Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -478,9 +478,49 @@ CONFIG_FB_HWCURSORIMAGE=n
 #
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
+#   file name support.
+# CONFIG_FAT_LFN - Enable FAT long file names.  NOTE:  Microsoft claims
+#   patents on FAT long file name technology.  Please read the
+#   disclaimer in the top-level COPYING file and only enable this
+#   feature if you understand these issues.
+# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
+#   default, maximum long file name is 255 bytes.  This can eat up
+#   a lot of memory (especially stack space).  If you are willing
+#   to live with some non-standard, short long file names, then
+#   define this value.  A good choice would be the same value as
+#   selected for CONFIG_NAME_MAX which will limit the visibility
+#   of longer file names anyway.
+# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
+# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. 
+#   This must have one of the values of 0xff or 0x00.
+#   Default: 0xff.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
+#   Default: 255.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+#   Default: 32.
+# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
+#   packing files together toward the end of the file or, if file are
+#   deleted at the end of the file, clean up can simply mean erasing
+#   the end of FLASH memory so that it can be re-used again.  However,
+#   doing this can also harm the life of the FLASH part because it can
+#   mean that the tail end of the FLASH is re-used too often. This
+#   threshold determines if/when it is worth erased the tail end of FLASH
+#   and making it available for re-use (and possible over-wear).
+#   Default: 8192.
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
+#   option will enable a limited form of memory mapping that is
+#   implemented by copying whole files into memory.
 #
 CONFIG_FS_FAT=n
+CONFIG_FAT_LCNAMES=n
+CONFIG_FAT_LFN=n
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
 CONFIG_FS_ROMFS=n
 
 #
diff --git a/nuttx/configs/olimex-lpc1766stk/ostest/defconfig b/nuttx/configs/olimex-lpc1766stk/ostest/defconfig
index ba3934100..8a324c171 100755
--- a/nuttx/configs/olimex-lpc1766stk/ostest/defconfig
+++ b/nuttx/configs/olimex-lpc1766stk/ostest/defconfig
@@ -1,8 +1,8 @@
 ############################################################################
 # configs/olimex-lpc1766stk/ostest/defconfig
 #
-#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#   Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -459,9 +459,49 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
+#   file name support.
+# CONFIG_FAT_LFN - Enable FAT long file names.  NOTE:  Microsoft claims
+#   patents on FAT long file name technology.  Please read the
+#   disclaimer in the top-level COPYING file and only enable this
+#   feature if you understand these issues.
+# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
+#   default, maximum long file name is 255 bytes.  This can eat up
+#   a lot of memory (especially stack space).  If you are willing
+#   to live with some non-standard, short long file names, then
+#   define this value.  A good choice would be the same value as
+#   selected for CONFIG_NAME_MAX which will limit the visibility
+#   of longer file names anyway.
+# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
+# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. 
+#   This must have one of the values of 0xff or 0x00.
+#   Default: 0xff.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
+#   Default: 255.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+#   Default: 32.
+# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
+#   packing files together toward the end of the file or, if file are
+#   deleted at the end of the file, clean up can simply mean erasing
+#   the end of FLASH memory so that it can be re-used again.  However,
+#   doing this can also harm the life of the FLASH part because it can
+#   mean that the tail end of the FLASH is re-used too often. This
+#   threshold determines if/when it is worth erased the tail end of FLASH
+#   and making it available for re-use (and possible over-wear).
+#   Default: 8192.
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
+#   option will enable a limited form of memory mapping that is
+#   implemented by copying whole files into memory.
 #
 CONFIG_FS_FAT=n
+CONFIG_FAT_LCNAMES=n
+CONFIG_FAT_LFN=n
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
 CONFIG_FS_ROMFS=n
 
 #
diff --git a/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig b/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig
index b51be7d2c..ef7f29707 100755
--- a/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig
+++ b/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig
@@ -1,7 +1,7 @@
 ############################################################################
 # configs/olimex-lpc1766stk/slip-httpd/defconfig
 #
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
 #   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
@@ -477,9 +477,49 @@ CONFIG_PREALLOC_TIMERS=8
 #
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
+#   file name support.
+# CONFIG_FAT_LFN - Enable FAT long file names.  NOTE:  Microsoft claims
+#   patents on FAT long file name technology.  Please read the
+#   disclaimer in the top-level COPYING file and only enable this
+#   feature if you understand these issues.
+# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
+#   default, maximum long file name is 255 bytes.  This can eat up
+#   a lot of memory (especially stack space).  If you are willing
+#   to live with some non-standard, short long file names, then
+#   define this value.  A good choice would be the same value as
+#   selected for CONFIG_NAME_MAX which will limit the visibility
+#   of longer file names anyway.
+# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
+# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. 
+#   This must have one of the values of 0xff or 0x00.
+#   Default: 0xff.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
+#   Default: 255.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+#   Default: 32.
+# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
+#   packing files together toward the end of the file or, if file are
+#   deleted at the end of the file, clean up can simply mean erasing
+#   the end of FLASH memory so that it can be re-used again.  However,
+#   doing this can also harm the life of the FLASH part because it can
+#   mean that the tail end of the FLASH is re-used too often. This
+#   threshold determines if/when it is worth erased the tail end of FLASH
+#   and making it available for re-use (and possible over-wear).
+#   Default: 8192.
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
+#   option will enable a limited form of memory mapping that is
+#   implemented by copying whole files into memory.
 #
 CONFIG_FS_FAT=n
+CONFIG_FAT_LCNAMES=n
+CONFIG_FAT_LFN=n
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
 CONFIG_FS_ROMFS=y
 
 #
diff --git a/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig b/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig
index 82ed2f806..46328bdd4 100755
--- a/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig
+++ b/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig
@@ -1,8 +1,8 @@
 ############################################################################
 # configs/olimex-lpc1766stk/thttpd/defconfig
 #
-#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#   Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -475,9 +475,49 @@ CONFIG_PREALLOC_TIMERS=8
 #
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
+#   file name support.
+# CONFIG_FAT_LFN - Enable FAT long file names.  NOTE:  Microsoft claims
+#   patents on FAT long file name technology.  Please read the
+#   disclaimer in the top-level COPYING file and only enable this
+#   feature if you understand these issues.
+# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
+#   default, maximum long file name is 255 bytes.  This can eat up
+#   a lot of memory (especially stack space).  If you are willing
+#   to live with some non-standard, short long file names, then
+#   define this value.  A good choice would be the same value as
+#   selected for CONFIG_NAME_MAX which will limit the visibility
+#   of longer file names anyway.
+# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
+# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. 
+#   This must have one of the values of 0xff or 0x00.
+#   Default: 0xff.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
+#   Default: 255.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+#   Default: 32.
+# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
+#   packing files together toward the end of the file or, if file are
+#   deleted at the end of the file, clean up can simply mean erasing
+#   the end of FLASH memory so that it can be re-used again.  However,
+#   doing this can also harm the life of the FLASH part because it can
+#   mean that the tail end of the FLASH is re-used too often. This
+#   threshold determines if/when it is worth erased the tail end of FLASH
+#   and making it available for re-use (and possible over-wear).
+#   Default: 8192.
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
+#   option will enable a limited form of memory mapping that is
+#   implemented by copying whole files into memory.
 #
 CONFIG_FS_FAT=n
+CONFIG_FAT_LCNAMES=n
+CONFIG_FAT_LFN=n
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
 CONFIG_FS_ROMFS=y
 
 #
diff --git a/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig b/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig
index f7b23816f..d880f0686 100755
--- a/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig
+++ b/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig
@@ -1,8 +1,8 @@
 ############################################################################
 # configs/olimex-lpc1766stk/usbserial/defconfig
 #
-#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#   Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -460,9 +460,49 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
+#   file name support.
+# CONFIG_FAT_LFN - Enable FAT long file names.  NOTE:  Microsoft claims
+#   patents on FAT long file name technology.  Please read the
+#   disclaimer in the top-level COPYING file and only enable this
+#   feature if you understand these issues.
+# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
+#   default, maximum long file name is 255 bytes.  This can eat up
+#   a lot of memory (especially stack space).  If you are willing
+#   to live with some non-standard, short long file names, then
+#   define this value.  A good choice would be the same value as
+#   selected for CONFIG_NAME_MAX which will limit the visibility
+#   of longer file names anyway.
+# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
+# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. 
+#   This must have one of the values of 0xff or 0x00.
+#   Default: 0xff.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
+#   Default: 255.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+#   Default: 32.
+# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
+#   packing files together toward the end of the file or, if file are
+#   deleted at the end of the file, clean up can simply mean erasing
+#   the end of FLASH memory so that it can be re-used again.  However,
+#   doing this can also harm the life of the FLASH part because it can
+#   mean that the tail end of the FLASH is re-used too often. This
+#   threshold determines if/when it is worth erased the tail end of FLASH
+#   and making it available for re-use (and possible over-wear).
+#   Default: 8192.
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
+#   option will enable a limited form of memory mapping that is
+#   implemented by copying whole files into memory.
 #
 CONFIG_FS_FAT=n
+CONFIG_FAT_LCNAMES=n
+CONFIG_FAT_LFN=n
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
 CONFIG_FS_ROMFS=n
 
 #
diff --git a/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig b/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig
index e3f2c0d71..d09a2576e 100755
--- a/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig
+++ b/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig
@@ -1,8 +1,8 @@
 ############################################################################
 # configs/olimex-lpc1766stk/usbstorage/defconfig
 #
-#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#   Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -460,9 +460,49 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
+#   file name support.
+# CONFIG_FAT_LFN - Enable FAT long file names.  NOTE:  Microsoft claims
+#   patents on FAT long file name technology.  Please read the
+#   disclaimer in the top-level COPYING file and only enable this
+#   feature if you understand these issues.
+# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
+#   default, maximum long file name is 255 bytes.  This can eat up
+#   a lot of memory (especially stack space).  If you are willing
+#   to live with some non-standard, short long file names, then
+#   define this value.  A good choice would be the same value as
+#   selected for CONFIG_NAME_MAX which will limit the visibility
+#   of longer file names anyway.
+# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
+# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. 
+#   This must have one of the values of 0xff or 0x00.
+#   Default: 0xff.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
+#   Default: 255.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+#   Default: 32.
+# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
+#   packing files together toward the end of the file or, if file are
+#   deleted at the end of the file, clean up can simply mean erasing
+#   the end of FLASH memory so that it can be re-used again.  However,
+#   doing this can also harm the life of the FLASH part because it can
+#   mean that the tail end of the FLASH is re-used too often. This
+#   threshold determines if/when it is worth erased the tail end of FLASH
+#   and making it available for re-use (and possible over-wear).
+#   Default: 8192.
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
+#   option will enable a limited form of memory mapping that is
+#   implemented by copying whole files into memory.
 #
 CONFIG_FS_FAT=n
+CONFIG_FAT_LCNAMES=n
+CONFIG_FAT_LFN=n
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
 CONFIG_FS_ROMFS=n
 
 #
diff --git a/nuttx/configs/olimex-lpc1766stk/wlan/defconfig b/nuttx/configs/olimex-lpc1766stk/wlan/defconfig
index 3f60ec1ad..10068605e 100755
--- a/nuttx/configs/olimex-lpc1766stk/wlan/defconfig
+++ b/nuttx/configs/olimex-lpc1766stk/wlan/defconfig
@@ -1,8 +1,8 @@
 ############################################################################
 # configs/olimex-lpc1766stk/wlan/defconfig
 #
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -460,9 +460,49 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
+#   file name support.
+# CONFIG_FAT_LFN - Enable FAT long file names.  NOTE:  Microsoft claims
+#   patents on FAT long file name technology.  Please read the
+#   disclaimer in the top-level COPYING file and only enable this
+#   feature if you understand these issues.
+# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
+#   default, maximum long file name is 255 bytes.  This can eat up
+#   a lot of memory (especially stack space).  If you are willing
+#   to live with some non-standard, short long file names, then
+#   define this value.  A good choice would be the same value as
+#   selected for CONFIG_NAME_MAX which will limit the visibility
+#   of longer file names anyway.
+# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
+# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. 
+#   This must have one of the values of 0xff or 0x00.
+#   Default: 0xff.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
+#   Default: 255.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+#   Default: 32.
+# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
+#   packing files together toward the end of the file or, if file are
+#   deleted at the end of the file, clean up can simply mean erasing
+#   the end of FLASH memory so that it can be re-used again.  However,
+#   doing this can also harm the life of the FLASH part because it can
+#   mean that the tail end of the FLASH is re-used too often. This
+#   threshold determines if/when it is worth erased the tail end of FLASH
+#   and making it available for re-use (and possible over-wear).
+#   Default: 8192.
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
+#   option will enable a limited form of memory mapping that is
+#   implemented by copying whole files into memory.
 #
 CONFIG_FS_FAT=n
+CONFIG_FAT_LCNAMES=n
+CONFIG_FAT_LFN=n
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
 CONFIG_FS_ROMFS=n
 
 #