Beginnings of PIC32 build environment

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3619 42af7a65-404d-4744-a932-0658087f49c3

10 files changed, 1009 insertions, 29 deletions

diff --git a/nuttx/arch/mips/include/mips32/irq.h b/nuttx/arch/mips/include/mips32/irq.h
index e2bb784bc..845eddaad 100755
--- a/nuttx/arch/mips/include/mips32/irq.h
+++ b/nuttx/arch/mips/include/mips32/irq.h
@@ -48,12 +48,31 @@
  * Definitions
  ****************************************************************************/
 
+/* Lots of missing logic here */
+
+#define XCPTCONTEXT_REGS 1
+
 /****************************************************************************
  * Public Types
  ****************************************************************************/
 
 #ifndef __ASSEMBLY__
 
+struct xcptcontext
+{
+  /* The following function pointer is non-NULL if there are pending signals
+   * to be processed.
+   */
+
+#ifndef CONFIG_DISABLE_SIGNALS
+  void *sigdeliver; /* Actual type is sig_deliver_t */
+#endif
+
+  /* Register save area */
+
+  uint32_t regs[XCPTCONTEXT_REGS];
+};
+
 /****************************************************************************
  * Inline functions
  ****************************************************************************/
diff --git a/nuttx/arch/mips/src/Makefile b/nuttx/arch/mips/src/Makefile
new file mode 100644
index 000000000..872b7e568
--- /dev/null
+++ b/nuttx/arch/mips/src/Makefile
@@ -0,0 +1,138 @@
+############################################################################
+# arch/mips/src/Makefile
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+-include chip/Make.defs
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(CONFIG_ARCH_MIPS),y)
+ARCH_SUBDIR     = mips32
+endif
+
+ifeq ($(WINTOOL),y)
+  NUTTX		= "${shell cygpath -w $(TOPDIR)/nuttx}"
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+		   -I "${shell cygpath -w $(ARCH_SRCDIR)/$(ARCH_SUBDIR)}" \
+		   -I "${shell cygpath -w $(TOPDIR)/sched}"
+else
+  NUTTX		= $(TOPDIR)/nuttx
+  CFLAGS	+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common \
+		   -I$(ARCH_SRCDIR)/$(ARCH_SUBDIR) -I$(TOPDIR)/sched
+endif
+
+HEAD_AOBJ	= $(HEAD_ASRC:.S=$(OBJEXT))
+
+ASRCS		= $(CHIP_ASRCS) $(CMN_ASRCS)
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+
+CSRCS		= $(CHIP_CSRCS) $(CMN_CSRCS)
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+LDFLAGS		= $(ARCHSCRIPT)
+EXTRA_LIBS	=
+
+LINKLIBS	=
+ifeq ($(WINTOOL),y)
+  LIBPATHS	= ${shell for path in $(LINKLIBS); do dir=`dirname $(TOPDIR)/$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
+  LIBPATHS	+= -L"${shell cygpath -w $(BOARDDIR)}"
+else
+  LIBPATHS	= $(addprefix -L$(TOPDIR)/,$(dir $(LINKLIBS)))
+  LIBPATHS	+= -L"$(BOARDDIR)"
+endif
+LDLIBS		= $(patsubst lib%,-l%,$(basename $(notdir $(LINKLIBS))))
+
+BOARDDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src/board
+
+LIBGCC		= "${shell $(CC) -print-libgcc-file-name}"
+
+VPATH		= chip:common:$(ARCH_SUBDIR)
+
+all: $(HEAD_OBJ) libarch$(LIBEXT)
+
+$(AOBJS) $(HEAD_AOBJ): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libarch$(LIBEXT): $(OBJS)
+	@( for obj in $(OBJS) ; do \
+		$(call ARCHIVE, $@, $${obj}); \
+	done ; )
+
+board/libboard$(LIBEXT):
+	@$(MAKE) -C board TOPDIR="$(TOPDIR)" libboard$(LIBEXT) EXTRADEFINES=$(EXTRADEFINES)
+
+nuttx: $(HEAD_AOBJ) board/libboard$(LIBEXT)
+	@echo "LD: nuttx"
+	@$(LD) --entry=__start $(LDFLAGS) $(LIBPATHS) -o $(NUTTX)$(EXEEXT) $(HEAD_AOBJ) $(EXTRA_OBJS) \
+		--start-group $(LDLIBS) -lboard --end-group $(EXTRA_LIBS) $(LIBGCC)
+	@$(NM) $(NUTTX)$(EXEEXT) | \
+	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
+	sort > $(TOPDIR)/System.map
+	@export vflashstart=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _vflashstart | cut -d' ' -f1`;  \
+	if [ ! -z "$$vflashstart" ]; then \
+		$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.vector=0x$$vflashstart $(NUTTX)$(EXEEXT) $(NUTTX).flashimage; \
+		mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT); \
+	fi
+
+.depend: Makefile chip/Make.defs $(SRCS)
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" depend ; \
+	fi
+	@$(MKDEP) --dep-path chip --dep-path common --dep-path $(ARCH_SUBDIR) \
+	 $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	@touch $@
+
+depend: .depend
+
+clean:
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" clean ; \
+	fi
+	@rm -f libarch$(LIBEXT) *~ .*.swp
+	$(call CLEAN)
+
+distclean: clean
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" distclean ; \
+	fi
+	@rm -f Make.dep .depend
+
+-include Make.dep
diff --git a/nuttx/arch/mips/src/common/up_arch.h b/nuttx/arch/mips/src/common/up_arch.h
new file mode 100644
index 000000000..97f62e553
--- /dev/null
+++ b/nuttx/arch/mips/src/common/up_arch.h
@@ -0,0 +1,89 @@
+/****************************************************************************
+ * arch/mips/src/common/up_arch.h
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef ___ARCH_ARM_SRC_COMMON_UP_ARCH_H
+#define ___ARCH_ARM_SRC_COMMON_UP_ARCH_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Inline Functions
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+# define getreg8(a)           (*(volatile uint8_t *)(a))
+# define putreg8(v,a)         (*(volatile uint8_t *)(a) = (v))
+# define getreg16(a)          (*(volatile uint16_t *)(a))
+# define putreg16(v,a)        (*(volatile uint16_t *)(a) = (v))
+# define getreg32(a)          (*(volatile uint32_t *)(a))
+# define putreg32(v,a)        (*(volatile uint32_t *)(a) = (v))
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/* Atomic modification of registers */
+
+EXTERN void modifyreg8(unsigned int addr, uint8_t clearbits, uint8_t setbits);
+EXTERN void modifyreg16(unsigned int addr, uint16_t clearbits, uint16_t setbits);
+EXTERN void modifyreg32(unsigned int addr, uint32_t clearbits, uint32_t setbits);
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* ___ARCH_ARM_SRC_COMMON_UP_ARCH_H */
diff --git a/nuttx/arch/mips/src/common/up_modifyreg16.c b/nuttx/arch/mips/src/common/up_modifyreg16.c
new file mode 100644
index 000000000..ca72dec3e
--- /dev/null
+++ b/nuttx/arch/mips/src/common/up_modifyreg16.c
@@ -0,0 +1,85 @@
+/****************************************************************************
+ * arch/mips/src/common/up_modifyreg16.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <debug.h>
+
+#include <arch/irq.h>
+#include <nuttx/arch.h>
+
+#include "up_arch.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: modifyreg16
+ *
+ * Description:
+ *   Atomically modify the specified bits in a memory mapped register
+ *
+ ****************************************************************************/
+
+void modifyreg16(unsigned int addr, uint16_t clearbits, uint16_t setbits)
+{
+  irqstate_t flags;
+  uint16_t   regval;
+
+  flags   = irqsave();
+  regval  = getreg16(addr);
+  regval &= ~clearbits;
+  regval |= setbits;
+  putreg16(regval, addr);
+  irqrestore(flags);
+}
diff --git a/nuttx/arch/mips/src/common/up_modifyreg32.c b/nuttx/arch/mips/src/common/up_modifyreg32.c
new file mode 100644
index 000000000..59bb3a1d8
--- /dev/null
+++ b/nuttx/arch/mips/src/common/up_modifyreg32.c
@@ -0,0 +1,85 @@
+/****************************************************************************
+ * arch/mips/src/common/up_modifyreg32.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <debug.h>
+
+#include <arch/irq.h>
+#include <nuttx/arch.h>
+
+#include "up_arch.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: modifyreg32
+ *
+ * Description:
+ *   Atomically modify the specified bits in a memory mapped register
+ *
+ ****************************************************************************/
+
+void modifyreg32(unsigned int addr, uint32_t clearbits, uint32_t setbits)
+{
+  irqstate_t flags;
+  uint32_t   regval;
+
+  flags   = irqsave();
+  regval  = getreg32(addr);
+  regval &= ~clearbits;
+  regval |= setbits;
+  putreg32(regval, addr);
+  irqrestore(flags);
+}
diff --git a/nuttx/arch/mips/src/common/up_modifyreg8.c b/nuttx/arch/mips/src/common/up_modifyreg8.c
new file mode 100644
index 000000000..b590458b3
--- /dev/null
+++ b/nuttx/arch/mips/src/common/up_modifyreg8.c
@@ -0,0 +1,85 @@
+/****************************************************************************
+ * arch/mips/src/common/up_modifyreg8.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <debug.h>
+
+#include <arch/irq.h>
+#include <nuttx/arch.h>
+
+#include "up_arch.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: modifyreg8
+ *
+ * Description:
+ *   Atomically modify the specified bits in a memory mapped register
+ *
+ ****************************************************************************/
+
+void modifyreg8(unsigned int addr, uint8_t clearbits, uint8_t setbits)
+{
+  irqstate_t flags;
+  uint8_t    regval;
+
+  flags   = irqsave();
+  regval  = getreg8(addr);
+  regval &= ~clearbits;
+  regval |= setbits;
+  putreg8(regval, addr);
+  irqrestore(flags);
+}
diff --git a/nuttx/arch/mips/src/pic32mx/Make.defs b/nuttx/arch/mips/src/pic32mx/Make.defs
new file mode 100755
index 000000000..be5296f1d
--- /dev/null
+++ b/nuttx/arch/mips/src/pic32mx/Make.defs
@@ -0,0 +1,51 @@
+############################################################################
+# arch/mips/src/pic32mx/Make.defs
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# The start-up, "head", file
+
+HEAD_ASRC =
+
+# Common MIPS files
+
+CMN_ASRCS = 
+CMN_CSRCS = up_modifyreg8.c up_modifyreg16.c up_modifyreg32.c
+
+# Required PIC32MX files
+
+CHIP_ASRCS =
+CHIP_CSRCS = 
+
+# Configuration-dependent PIC32MX files
+
diff --git a/nuttx/arch/mips/src/pic32mx/pic32mx-internal.h b/nuttx/arch/mips/src/pic32mx/pic32mx-internal.h
new file mode 100755
index 000000000..7c40bff8d
--- /dev/null
+++ b/nuttx/arch/mips/src/pic32mx/pic32mx-internal.h
@@ -0,0 +1,428 @@
+/************************************************************************************
+ * arch/mips/src/pic32mx/pic32mx-internal.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_MIPS_SRC_PIC32MX_PIC32MX_INTERNAL_H
+#define __ARCH_MIPS_SRC_PIC32MX_PIC32MX_INTERNAL_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/compiler.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+
+#include "up_internal.h"
+#include "chip.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Configuration ********************************************************************/
+
+/* Bit-encoded input to pic32mx_configgpio() ****************************************/
+/* To be provided */
+
+/* GPIO pin definitions *************************************************************/
+/* To be provided */
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+typedef FAR void *DMA_HANDLE;
+typedef void (*dma_callback_t)(DMA_HANDLE handle, void *arg, int result);
+
+/* The following is used for sampling DMA registers when CONFIG DEBUG_DMA is selected */
+
+#ifdef CONFIG_DEBUG_DMA
+struct pic32mx_dmaglobalregs_s
+{
+  /* Global Registers */
+#warning "Missing definitions"
+};
+
+struct pic32mx_dmachanregs_s
+{
+  /* Channel Registers */
+#warning "Missing definitions"
+};
+
+struct pic32mx_dmaregs_s
+{
+  /* Global Registers */
+
+  struct pic32mx_dmaglobalregs_s gbl;
+
+  /* Channel Registers */
+
+  struct pic32mx_dmachanregs_s   ch;
+};
+#endif
+
+/************************************************************************************
+ * Inline Functions
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: pic32mx_clockconfig
+ *
+ * Description:
+ *   Called to initialize the PIC32MX.  This does whatever setup is needed to put the
+ *   MCU in a usable state.  This includes the initialization of clocking using the
+ *   settings in board.h.
+ *
+ ************************************************************************************/
+
+EXTERN void pic32mx_clockconfig(void);
+
+/************************************************************************************
+ * Name: pic32mx_lowsetup
+ *
+ * Description:
+ *   Called at the very beginning of _start.  Performs low level initialization
+ *   including setup of the console UART.  This UART done early so that the serial
+ *   console is available for debugging very early in the boot sequence.
+ *
+ ************************************************************************************/
+
+EXTERN void pic32mx_lowsetup(void);
+
+/************************************************************************************
+ * Name: pic32mx_gpioirqinitialize
+ *
+ * Description:
+ *   Initialize logic to support a second level of interrupt decoding for GPIO pins.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_GPIO_IRQ
+EXTERN void pic32mx_gpioirqinitialize(void);
+#else
+#  define pic32mx_gpioirqinitialize()
+#endif
+
+/************************************************************************************
+ * Name: pic32mx_configgpio
+ *
+ * Description:
+ *   Configure a GPIO pin based on bit-encoded description of the pin.
+ *
+ ************************************************************************************/
+
+EXTERN int pic32mx_configgpio(uint16_t cfgset);
+
+/************************************************************************************
+ * Name: pic32mx_gpiowrite
+ *
+ * Description:
+ *   Write one or zero to the selected GPIO pin
+ *
+ ************************************************************************************/
+
+EXTERN void pic32mx_gpiowrite(uint16_t pinset, bool value);
+
+/************************************************************************************
+ * Name: pic32mx_gpioread
+ *
+ * Description:
+ *   Read one or zero from the selected GPIO pin
+ *
+ ************************************************************************************/
+
+EXTERN bool pic32mx_gpioread(uint16_t pinset);
+
+/************************************************************************************
+ * Name: pic32mx_gpioirqenable
+ *
+ * Description:
+ *   Enable the interrupt for specified GPIO IRQ
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_GPIO_IRQ
+EXTERN void pic32mx_gpioirqenable(int irq);
+#else
+#  define pic32mx_gpioirqenable(irq)
+#endif
+
+/************************************************************************************
+ * Name: pic32mx_gpioirqdisable
+ *
+ * Description:
+ *   Disable the interrupt for specified GPIO IRQ
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_GPIO_IRQ
+EXTERN void pic32mx_gpioirqdisable(int irq);
+#else
+#  define pic32mx_gpioirqdisable(irq)
+#endif
+
+/************************************************************************************
+ * Function:  pic32mx_dumpgpio
+ *
+ * Description:
+ *   Dump all GPIO registers associated with the base address of the provided pinset.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_DEBUG_GPIO
+EXTERN int pic32mx_dumpgpio(uint16_t pinset, const char *msg);
+#else
+#  define pic32mx_dumpgpio(p,m)
+#endif
+
+/************************************************************************************
+ * Name:  pic32mx_spiNselect, pic32mx_spiNstatus, and pic32mx_spiNcmddata
+ *
+ * Description:
+ *   These external functions must be provided by board-specific logic.  They are
+ *   implementations of the select, status, and cmddata methods of the SPI interface
+ *   defined by struct spi_ops_s (see include/nuttx/spi.h). All other methods 
+ *   including up_spiinitialize()) are provided by common PIC32MX logic.  To use
+ *   this common SPI logic on your board:
+ *
+ *   1. Provide logic in pic32mx_boardinitialize() to configure SPI/SSP chip select
+ *      pins.
+ *   2. Provide pic32mx_spiNselect() and pic32mx_spiNstatus() functions
+ *      in your board-specific logic.  These functions will perform chip selection
+ *      and status operations using GPIOs in the way your board is configured.
+ *   2. If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, provide
+ *      pic32mx_spiNcmddata() functions in your board-specific logic.  These
+ *      functions will perform cmd/data selection operations using GPIOs in the way
+ *      your board is configured.
+ *   3. Add a call to up_spiinitialize() in your low level application
+ *      initialization logic
+ *   4. The handle returned by up_spiinitialize() may then be used to bind the
+ *      SPI driver to higher level logic (e.g., calling 
+ *      mmcsd_spislotinitialize(), for example, will bind the SPI driver to
+ *      the SPI MMC/SD driver).
+ *
+ ************************************************************************************/
+
+struct spi_dev_s;
+enum spi_dev_e;
+
+#ifdef CONFIG_PIC32MX_SPI1
+EXTERN void  pic32mx_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
+EXTERN uint8_t pic32mx_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
+#ifdef CONFIG_SPI_CMDDATA
+EXTERN int pic32mx_spi1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
+#endif
+#endif
+#ifdef CONFIG_PIC32MX_SPI2
+EXTERN void  pic32mx_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
+EXTERN uint8_t pic32mx_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
+#ifdef CONFIG_SPI_CMDDATA
+EXTERN int pic32mx_spi2cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
+#endif
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_spiflush
+ *
+ * Description:
+ *   Flush and discard any words left in the RX fifo.  This can be called
+ *   from ssp0/1select after a device is deselected (if you worry about such
+ *   things).
+ *
+ * Input Parameters:
+ *   dev - Device-specific state data
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+struct spi_dev_s;
+#if defined(CONFIG_PIC32MX_SPI1) || defined(CONFIG_PIC32MX_SPI2)
+EXTERN void pic32mx_spiflush(FAR struct spi_dev_s *dev);
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmainitialize
+ *
+ * Description:
+ *   Initialize the GPDMA subsystem.
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+EXTERN void pic32mx_dmainitilaize(void);
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmachannel
+ *
+ * Description:
+ *   Allocate a DMA channel.  This function sets aside a DMA channel and
+ *   gives the caller exclusive access to the DMA channel.
+ *
+ * Returned Value:
+ *   One success, this function returns a non-NULL, void* DMA channel
+ *   handle.  NULL is returned on any failure.  This function can fail only
+ *   if no DMA channel is available.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+EXTERN DMA_HANDLE pic32mx_dmachannel(void);
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmafree
+ *
+ * Description:
+ *   Release a DMA channel.  NOTE:  The 'handle' used in this argument must
+ *   NEVER be used again until pic32mx_dmachannel() is called again to re-gain
+ *   a valid handle.
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+EXTERN void pic32mx_dmafree(DMA_HANDLE handle);
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmasetup
+ *
+ * Description:
+ *   Configure DMA for one transfer.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+EXTERN int pic32mx_dmarxsetup(DMA_HANDLE handle,
+                            uint32_t control, uint32_t config,
+                            uint32_t srcaddr, uint32_t destaddr,
+                            size_t nbytes);
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmastart
+ *
+ * Description:
+ *   Start the DMA transfer
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+EXTERN int pic32mx_dmastart(DMA_HANDLE handle, dma_callback_t callback, void *arg);
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmastop
+ *
+ * Description:
+ *   Cancel the DMA.  After pic32mx_dmastop() is called, the DMA channel is
+ *   reset and pic32mx_dmasetup() must be called before pic32mx_dmastart() can be
+ *   called again
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+EXTERN void pic32mx_dmastop(DMA_HANDLE handle);
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmasample
+ *
+ * Description:
+ *   Sample DMA register contents
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+#ifdef CONFIG_DEBUG_DMA
+EXTERN void pic32mx_dmasample(DMA_HANDLE handle, struct pic32mx_dmaregs_s *regs);
+#else
+#  define pic32mx_dmasample(handle,regs)
+#endif
+#endif
+
+/****************************************************************************
+ * Name: pic32mx_dmadump
+ *
+ * Description:
+ *   Dump previously sampled DMA register contents
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_pic32mx_GPDMA
+#ifdef CONFIG_DEBUG_DMA
+EXTERN void pic32mx_dmadump(DMA_HANDLE handle, const struct pic32mx_dmaregs_s *regs,
+                          const char *msg);
+#else
+#  define pic32mx_dmadump(handle,regs,msg)
+#endif
+#endif
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ARCH_MIPS_SRC_PIC32MX_PIC32MX_INTERNAL_H */
diff --git a/nuttx/arch/mips/src/pic32mx/pic32mx-memorymap.h b/nuttx/arch/mips/src/pic32mx/pic32mx-memorymap.h
index 061859806..f81e9695c 100755
--- a/nuttx/arch/mips/src/pic32mx/pic32mx-memorymap.h
+++ b/nuttx/arch/mips/src/pic32mx/pic32mx-memorymap.h
@@ -126,7 +126,7 @@
 

 /* Parallel Master Register Base Address */

 

-#  define PCI32MX_PMP_K1BASE        (PIC32MX_SFR_K1BASE + 0x00007000)

+#  define PIC32MX_PMP_K1BASE        (PIC32MX_SFR_K1BASE + 0x00007000)

 

 /* ADC Register Base Addresses */

 

diff --git a/nuttx/arch/mips/src/pic32mx/pic32mx-pmp.h b/nuttx/arch/mips/src/pic32mx/pic32mx-pmp.h
index a68176bde..0eac80fc8 100755
--- a/nuttx/arch/mips/src/pic32mx/pic32mx-pmp.h
+++ b/nuttx/arch/mips/src/pic32mx/pic32mx-pmp.h
@@ -80,34 +80,34 @@
 

 /* Register Addresses ***************************************************************/

 

-#define PIC32MX_PMP_CON            (PCI32MX_PMP_K1BASE+PIC32MX_PMP_CON_OFFSET)

-#define PIC32MX_PMP_CONCLR         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_CONCLR_OFFSET)

-#define PIC32MX_PMP_CONSET         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_CONSET_OFFSET)

-#define PIC32MX_PMP_CONINV         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_CONINV_OFFSET)

-#define PIC32MX_PMP_MODE           (PCI32MX_PMP_K1BASE+PIC32MX_PMP_MODE_OFFSET)

-#define PIC32MX_PMP_MODECLR        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_MODECLR_OFFSET)

-#define PIC32MX_PMP_MODESET        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_MODESET_OFFSET)

-#define PIC32MX_PMP_MODEINV        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_MODEINV_OFFSET)

-#define PIC32MX_PMP_ADDR           (PCI32MX_PMP_K1BASE+PIC32MX_PMP_ADDR_OFFSET)

-#define PIC32MX_PMP_ADDRCLR        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_ADDRCLR_OFFSET)

-#define PIC32MX_PMP_ADDRSET        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_ADDRSET_OFFSET)

-#define PIC32MX_PMP_ADDRINV        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_ADDRINV_OFFSET)

-#define PIC32MX_PMP_DOUT           (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DOUT_OFFSET)

-#define PIC32MX_PMP_DOUTCLR        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DOUTCLR_OFFSET)

-#define PIC32MX_PMP_DOUTSET        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DOUTSET_OFFSET)

-#define PIC32MX_PMP_DOUTINV        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DOUTINV_OFFSET)

-#define PIC32MX_PMP_DIN            (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DIN_OFFSET)

-#define PIC32MX_PMP_DINCLR         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DINCLR_OFFSET)

-#define PIC32MX_PMP_DINSET         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DINSET_OFFSET)

-#define PIC32MX_PMP_DININV         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_DININV_OFFSET)

-#define PIC32MX_PMP_AEN            (PCI32MX_PMP_K1BASE+PIC32MX_PMP_AEN_OFFSET)

-#define PIC32MX_PMP_AENCLR         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_AENCLR_OFFSET)

-#define PIC32MX_PMP_AENSET         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_AENSET_OFFSET)

-#define PIC32MX_PMP_AENINV         (PCI32MX_PMP_K1BASE+PIC32MX_PMP_AENINV_OFFSET)

-#define PIC32MX_PMP_STAT           (PCI32MX_PMP_K1BASE+PIC32MX_PMP_STAT_OFFSET)

-#define PIC32MX_PMP_STATCLR        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_STATCLR_OFFSET)

-#define PIC32MX_PMP_STATSET        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_STATSET_OFFSET)

-#define PIC32MX_PMP_STATINV        (PCI32MX_PMP_K1BASE+PIC32MX_PMP_STATINV_OFFSET)

+#define PIC32MX_PMP_CON            (PIC32MX_PMP_K1BASE+PIC32MX_PMP_CON_OFFSET)

+#define PIC32MX_PMP_CONCLR         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_CONCLR_OFFSET)

+#define PIC32MX_PMP_CONSET         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_CONSET_OFFSET)

+#define PIC32MX_PMP_CONINV         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_CONINV_OFFSET)

+#define PIC32MX_PMP_MODE           (PIC32MX_PMP_K1BASE+PIC32MX_PMP_MODE_OFFSET)

+#define PIC32MX_PMP_MODECLR        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_MODECLR_OFFSET)

+#define PIC32MX_PMP_MODESET        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_MODESET_OFFSET)

+#define PIC32MX_PMP_MODEINV        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_MODEINV_OFFSET)

+#define PIC32MX_PMP_ADDR           (PIC32MX_PMP_K1BASE+PIC32MX_PMP_ADDR_OFFSET)

+#define PIC32MX_PMP_ADDRCLR        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_ADDRCLR_OFFSET)

+#define PIC32MX_PMP_ADDRSET        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_ADDRSET_OFFSET)

+#define PIC32MX_PMP_ADDRINV        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_ADDRINV_OFFSET)

+#define PIC32MX_PMP_DOUT           (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DOUT_OFFSET)

+#define PIC32MX_PMP_DOUTCLR        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DOUTCLR_OFFSET)

+#define PIC32MX_PMP_DOUTSET        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DOUTSET_OFFSET)

+#define PIC32MX_PMP_DOUTINV        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DOUTINV_OFFSET)

+#define PIC32MX_PMP_DIN            (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DIN_OFFSET)

+#define PIC32MX_PMP_DINCLR         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DINCLR_OFFSET)

+#define PIC32MX_PMP_DINSET         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DINSET_OFFSET)

+#define PIC32MX_PMP_DININV         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_DININV_OFFSET)

+#define PIC32MX_PMP_AEN            (PIC32MX_PMP_K1BASE+PIC32MX_PMP_AEN_OFFSET)

+#define PIC32MX_PMP_AENCLR         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_AENCLR_OFFSET)

+#define PIC32MX_PMP_AENSET         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_AENSET_OFFSET)

+#define PIC32MX_PMP_AENINV         (PIC32MX_PMP_K1BASE+PIC32MX_PMP_AENINV_OFFSET)

+#define PIC32MX_PMP_STAT           (PIC32MX_PMP_K1BASE+PIC32MX_PMP_STAT_OFFSET)

+#define PIC32MX_PMP_STATCLR        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_STATCLR_OFFSET)

+#define PIC32MX_PMP_STATSET        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_STATSET_OFFSET)

+#define PIC32MX_PMP_STATINV        (PIC32MX_PMP_K1BASE+PIC32MX_PMP_STATINV_OFFSET)

 

 /* Register Bit-Field Definitions ***************************************************/