First cut at x86 build environment

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3336 42af7a65-404d-4744-a932-0658087f49c3

26 files changed, 3022 insertions, 0 deletions

diff --git a/nuttx/arch/x86/src/Makefile b/nuttx/arch/x86/src/Makefile
new file mode 100644
index 000000000..9281828bb
--- /dev/null
+++ b/nuttx/arch/x86/src/Makefile
@@ -0,0 +1,143 @@
+############################################################################
+# arch/x86/src/Makefile
+#
+#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+-include chip/Make.defs
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(CONFIG_ARCH_I486),y)
+ARCH_SUBDIR	= i486
+endif
+
+ifeq ($(WINTOOL),y)
+  NUTTX		= "${shell cygpath -w $(TOPDIR)/nuttx}"
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+		   -I "${shell cygpath -w $(ARCH_SRCDIR)/$(ARCH_SUBDIR)}" \
+		   -I "${shell cygpath -w $(TOPDIR)/sched}"
+else
+  NUTTX		= $(TOPDIR)/nuttx
+  CFLAGS	+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common \
+		   -I$(ARCH_SRCDIR)/$(ARCH_SUBDIR) -I$(TOPDIR)/sched
+endif
+
+HEAD_AOBJ	= $(HEAD_ASRC:.S=$(OBJEXT))
+
+ASRCS		= $(CHIP_ASRCS) $(CMN_ASRCS)
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+
+CSRCS		= $(CHIP_CSRCS) $(CMN_CSRCS)
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+LDFLAGS		= $(ARCHSCRIPT)
+EXTRA_LIBS	=
+
+LINKLIBS	=
+ifeq ($(WINTOOL),y)
+  LIBPATHS	= ${shell for path in $(LINKLIBS); do dir=`dirname $(TOPDIR)/$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
+  LIBPATHS	+= -L"${shell cygpath -w $(BOARDDIR)}"
+else
+  LIBPATHS	= $(addprefix -L$(TOPDIR)/,$(dir $(LINKLIBS)))
+  LIBPATHS	+= -L"$(BOARDDIR)"
+endif
+LDLIBS		= $(patsubst lib%,-l%,$(basename $(notdir $(LINKLIBS))))
+
+BOARDDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src/board
+
+LIBGCC		= "${shell $(CC) -print-libgcc-file-name}"
+
+VPATH		= chip:common:$(ARCH_SUBDIR)
+
+all: $(HEAD_OBJ) libarch$(LIBEXT)
+
+$(AOBJS) $(HEAD_AOBJ): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libarch$(LIBEXT): $(OBJS)
+	@( for obj in $(OBJS) ; do \
+		$(call ARCHIVE, $@, $${obj}); \
+	done ; )
+
+board/libboard$(LIBEXT):
+	@$(MAKE) -C board TOPDIR="$(TOPDIR)" libboard$(LIBEXT)
+
+nuttx: $(HEAD_AOBJ) board/libboard$(LIBEXT)
+	@echo "LD: nuttx"
+	@$(LD) --entry=__start $(LDFLAGS) $(LIBPATHS) -o $(NUTTX)$(EXEEXT) $(HEAD_AOBJ) $(EXTRA_OBJS) \
+		--start-group $(LDLIBS) -lboard --end-group $(EXTRA_LIBS) $(LIBGCC)
+ifeq ($(CONFIG_BOOT_RUNFROMFLASH),y)
+	@export flashloc=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _eronly | cut -d' ' -f1`;  \
+	$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.data=0x$$flashloc $(NUTTX)$(EXEEXT) $(NUTTX).flashimage
+	@mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT)
+endif
+	@$(NM) $(NUTTX)$(EXEEXT) | \
+	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
+	sort > $(TOPDIR)/System.map
+	@export vflashstart=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _vflashstart | cut -d' ' -f1`;  \
+	if [ ! -z "$$vflashstart" ]; then \
+		$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.vector=0x$$vflashstart $(NUTTX)$(EXEEXT) $(NUTTX).flashimage; \
+		mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT); \
+	fi
+
+.depend: Makefile chip/Make.defs $(SRCS)
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" depend ; \
+	fi
+	@$(MKDEP) --dep-path chip --dep-path common --dep-path $(ARCH_SUBDIR) \
+	 $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	@touch $@
+
+depend: .depend
+
+clean:
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" clean ; \
+	fi
+	@rm -f libarch$(LIBEXT) *~ .*.swp
+	$(call CLEAN)
+
+distclean: clean
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" distclean ; \
+	fi
+	@rm -f Make.dep .depend
+
+-include Make.dep
diff --git a/nuttx/arch/x86/src/README.txt b/nuttx/arch/x86/src/README.txt
new file mode 100755
index 000000000..1b0c0590b
--- /dev/null
+++ b/nuttx/arch/x86/src/README.txt
@@ -0,0 +1,31 @@
+arch/x86/src/README.txt

+^^^^^^^^^^^^^^^^^^^^^^^

+

+This directory holds x86-specific source files.  All x86 source reside in

+lower-level common, chip-specific, and architecture-specific directories.

+

+common/ Directory

+^^^^^^^^^^^^^^^^^

+

+This directory holds source files common to all x86 architectures.

+

+Architecture-Specific Directories

+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

+

+Architecture-specific directories hold common source files shared for by

+implementations of specific x86 architectures.

+

+i486

+  This directory holds logic appropriate for any instantiation of the 32-bit

+  i486 architecture.

+

+Chip-Specific directories

+^^^^^^^^^^^^^^^^^^^^^^^^^

+

+The same x86 architecture may be realized in different chip implementations.

+For SoC chips, in particular, on-chip devices and differing interrupt

+structures may require special, chip-specific definitions in these chip-

+specific directories.

+

+qemu

+  This is the implementation of NuttX on the QEMU x86 simulation.

diff --git a/nuttx/arch/x86/src/common/up_allocateheap.c b/nuttx/arch/x86/src/common/up_allocateheap.c
new file mode 100644
index 000000000..3273d681f
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_allocateheap.c
@@ -0,0 +1,82 @@
+/****************************************************************************
+ * arch/x86/src/common/up_allocateheap.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <debug.h>
+
+#include <nuttx/arch.h>
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+/****************************************************************************
+ * Private Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_allocate_heap
+ *
+ * Description:
+ *   The heap may be statically allocated by defining CONFIG_HEAP_BASE and
+ *   CONFIG_HEAP_SIZE.  If these are not defined, then this function will be
+ *   called to dynamically set aside the heap region.
+ *
+ ****************************************************************************/
+
+void up_allocate_heap(FAR void **heap_start, size_t *heap_size)
+{
+  up_ledon(LED_HEAPALLOCATE);
+  *heap_start = (FAR void*)g_heapbase;
+  *heap_size = CONFIG_DRAM_END - g_heapbase;
+}
diff --git a/nuttx/arch/x86/src/common/up_arch.h b/nuttx/arch/x86/src/common/up_arch.h
new file mode 100644
index 000000000..96d49d306
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_arch.h
@@ -0,0 +1,90 @@
+/****************************************************************************
+ * arch/x86/src/common/up_arch.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef ___ARCH_X86_SRC_COMMON_UP_ARCH_H
+#define ___ARCH_X86_SRC_COMMON_UP_ARCH_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+#include <arch/io.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Inline Functions
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+# define getreg8(p)           inb(p)
+# define putreg8(v,p)         outb(v,p)
+# define getreg16(p)          inw(p)
+# define putreg16(v,p)        outw(v,p)
+# define getreg32(p)          inl(p)
+# define putreg32(v,p)        outl(v,p)
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/* Atomic modification of registers */
+
+EXTERN void modifyreg8(unsigned int addr, uint8_t clearbits, uint8_t setbits);
+EXTERN void modifyreg16(unsigned int addr, uint16_t clearbits, uint16_t setbits);
+EXTERN void modifyreg32(unsigned int addr, uint32_t clearbits, uint32_t setbits);
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* ___ARCH_X86_SRC_COMMON_UP_ARCH_H */
diff --git a/nuttx/arch/x86/src/common/up_exit.c b/nuttx/arch/x86/src/common/up_exit.c
new file mode 100644
index 000000000..ceca72c87
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_exit.c
@@ -0,0 +1,174 @@
+/****************************************************************************
+ * common/up_exit.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sched.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+
+#include "os_internal.h"
+#include "up_internal.h"
+
+#ifdef CONFIG_DUMP_ON_EXIT
+#include <nuttx/fs.h>
+#endif
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: _up_dumponexit
+ *
+ * Description:
+ *   Dump the state of all tasks whenever on task exits.  This is debug
+ *   instrumentation that was added to check file-related reference counting
+ *   but could be useful again sometime in the future.
+ *
+ ****************************************************************************/
+
+#if defined(CONFIG_DUMP_ON_EXIT) && defined(CONFIG_DEBUG)
+static void _up_dumponexit(FAR _TCB *tcb, FAR void *arg)
+{
+#if CONFIG_NFILE_DESCRIPTORS > 0 || CONFIG_NFILE_STREAMS > 0
+  int i;
+#endif
+
+  sdbg("  TCB=%p name=%s pid=%d\n", tcb, tcb->argv[0], tcb->pid);
+  sdbg("    priority=%d state=%d\n", tcb->sched_priority, tcb->task_state);
+
+#if CONFIG_NFILE_DESCRIPTORS > 0
+  if (tcb->filelist)
+    {
+      sdbg("    filelist refcount=%d\n",
+           tcb->filelist->fl_crefs);
+
+      for (i = 0; i < CONFIG_NFILE_DESCRIPTORS; i++)
+        {
+          struct inode *inode = tcb->filelist->fl_files[i].f_inode;
+          if (inode)
+            {
+              sdbg("      fd=%d refcount=%d\n",
+                   i, inode->i_crefs);
+            }
+        }
+    }
+#endif
+
+#if CONFIG_NFILE_STREAMS > 0
+  if (tcb->streams)
+    {
+      sdbg("    streamlist refcount=%d\n",
+           tcb->streams->sl_crefs);
+
+      for (i = 0; i < CONFIG_NFILE_STREAMS; i++)
+        {
+          struct file_struct *filep = &tcb->streams->sl_streams[i];
+          if (filep->fs_filedes >= 0)
+            {
+#if CONFIG_STDIO_BUFFER_SIZE > 0
+              sdbg("      fd=%d nbytes=%d\n",
+                   filep->fs_filedes,
+                  filep->fs_bufpos - filep->fs_bufstart);
+#else
+              sdbg("      fd=%d\n", filep->fs_filedes);
+#endif
+            }
+        }
+    }
+#endif
+}
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: _exit
+ *
+ * Description:
+ *   This function causes the currently executing task to cease to exist.
+ *   This is a special case of task_delete() where the task to be deleted is
+ *   the currently executing task.  It is more complex because a context
+ *   switch must be perform to the next ready to run task.
+ *
+ ****************************************************************************/
+
+void _exit(int status)
+{
+  _TCB* tcb;
+
+  /* Disable interrupts.  They will be restored when the next
+   * task is started.
+   */
+
+  (void)irqsave();
+
+  slldbg("TCB=%p exitting\n", g_readytorun.head);
+
+#if defined(CONFIG_DUMP_ON_EXIT) && defined(CONFIG_DEBUG)
+  slldbg("Other tasks:\n");
+  sched_foreach(_up_dumponexit, NULL);
+#endif
+
+  /* Destroy the task at the head of the ready to run list. */
+
+  (void)task_deletecurrent();
+
+  /* Now, perform the context switch to the new ready-to-run task at the
+   * head of the list.
+   */
+
+  tcb = (_TCB*)g_readytorun.head;
+
+  /* Then switch contexts */
+
+  up_fullcontextrestore(tcb->xcp.regs);
+}
+
diff --git a/nuttx/arch/x86/src/common/up_initialize.c b/nuttx/arch/x86/src/common/up_initialize.c
new file mode 100644
index 000000000..9ce9523ed
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_initialize.c
@@ -0,0 +1,168 @@
+/****************************************************************************
+ * arch/x86/src/common/up_initialize.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <nuttx/arch.h>
+#include <nuttx/fs.h>
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_calibratedelay
+ *
+ * Description:
+ *   Delay loops are provided for short timing loops.  This function, if
+ *   enabled, will just wait for 100 seconds.  Using a stopwatch, you can
+ *   can then determine if the timing loops are properly calibrated.
+ *
+ ****************************************************************************/
+
+#if defined(CONFIG_ARCH_CALIBRATION) && defined(CONFIG_DEBUG)
+static void up_calibratedelay(void)
+{
+  int i;
+  lldbg("Beginning 100s delay\n");
+  for (i = 0; i < 100; i++)
+    {
+      up_mdelay(1000);
+    }
+  lldbg("End 100s delay\n");
+}
+#else
+# define up_calibratedelay()
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_initialize
+ *
+ * Description:
+ *   up_initialize will be called once during OS initialization after the
+ *   basic OS services have been initialized.  The architecture specific
+ *   details of initializing the OS will be handled here.  Such things as
+ *   setting up interrupt service routines, starting the clock, and
+ *   registering device drivers are some of the things that are different
+ *   for each processor and hardware platform.
+ *
+ *   up_initialize is called after the OS initialized but before the user
+ *   initialization logic has been started and before the libraries have
+ *   been initialized.  OS services and driver services are available.
+ *
+ ****************************************************************************/
+
+void up_initialize(void)
+{
+  /* Initialize global variables */
+
+  current_regs = NULL;
+
+  /* Calibrate the timing loop */
+
+  up_calibratedelay();
+
+  /* Add any extra memory fragments to the memory manager */
+
+  up_addregion();
+
+  /* Initialize the interrupt subsystem */
+
+  up_irqinitialize();
+
+  /* Initialize the DMA subsystem if the weak function stm32_dmainitialize has been
+   * brought into the build
+   */
+
+#ifdef CONFIG_ARCH_DMA
+#ifdef CONFIG_HAVE_WEAKFUNCTIONS
+  if (up_dmainitialize)
+#endif
+    {
+      up_dmainitialize();
+    }
+#endif
+
+  /* Initialize the system timer interrupt */
+
+#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
+  up_timerinit();
+#endif
+
+  /* Register devices */
+
+#if CONFIG_NFILE_DESCRIPTORS > 0
+  devnull_register();   /* Standard /dev/null */
+#endif
+
+  /* Initialize the serial device driver */
+
+#ifdef CONFIG_USE_SERIALDRIVER
+  up_serialinit();
+#elif defined(CONFIG_DEV_LOWCONSOLE)
+  lowconsole_init();
+#endif
+
+  /* Initialize the netwok */
+
+  up_netinitialize();
+
+  /* Initialize USB -- device and/or host */
+
+  up_usbinitialize();
+  up_ledon(LED_IRQSENABLED);
+}
diff --git a/nuttx/arch/x86/src/common/up_internal.h b/nuttx/arch/x86/src/common/up_internal.h
new file mode 100644
index 000000000..9730c3372
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_internal.h
@@ -0,0 +1,258 @@
+/****************************************************************************
+ * arch/x86/src/common/up_internal.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __ARCH_X86_SRC_COMMON_UP_INTERNAL_H
+#define __ARCH_X86_SRC_COMMON_UP_INTERNAL_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+#  include <stdint.h>
+#endif
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Bring-up debug configurations.  These are here (vs defconfig) because
+ * these should only be controlled during low level board bring-up and not
+ * part of normal platform configuration.
+ */
+
+#undef  CONFIG_SUPPRESS_INTERRUPTS    /* DEFINED: Do not enable interrupts */
+#undef  CONFIG_SUPPRESS_TIMER_INTS    /* DEFINED: No timer */
+#undef  CONFIG_SUPPRESS_SERIAL_INTS   /* DEFINED: Console will poll */
+#undef  CONFIG_SUPPRESS_UART_CONFIG   /* DEFINED: Do not reconfig UART */
+#undef  CONFIG_DUMP_ON_EXIT           /* DEFINED: Dump task state on exit */
+
+/* Determine which (if any) console driver to use */
+
+#if CONFIG_NFILE_DESCRIPTORS == 0 || defined(CONFIG_DEV_LOWCONSOLE)
+#  undef CONFIG_USE_SERIALDRIVER
+#  undef CONFIG_USE_EARLYSERIALINIT
+#elif defined(CONFIG_DEV_CONSOLE) && CONFIG_NFILE_DESCRIPTORS > 0
+#  define CONFIG_USE_SERIALDRIVER 1
+#  define CONFIG_USE_EARLYSERIALINIT 1
+#endif
+
+/* Check if an interrupt stack size is configured */
+
+#ifndef CONFIG_ARCH_INTERRUPTSTACK
+# define CONFIG_ARCH_INTERRUPTSTACK 0
+#endif
+
+/* Macros to handle saving and restore interrupt state.  In the current
+ * model, the state is copied from the stack to the TCB, but only a
+ * referenced is passed to get the state from the TCB.
+ */
+
+#define up_savestate(regs)    up_copystate(regs, current_regs)
+#define up_restorestate(regs) (current_regs = regs)
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+typedef void (*up_vector_t)(void);
+#endif
+
+/****************************************************************************
+ * Public Variables
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+/* This holds a references to the current interrupt level register storage
+ * structure.  If is non-NULL only during interrupt processing.
+ */
+
+extern uint32_t *current_regs;
+
+/* This is the beginning of heap as provided from up_head.S. This is the first
+ * address in DRAM after the loaded program+bss+idle stack.  The end of the
+ * heap is CONFIG_DRAM_END
+ */
+
+extern uint32_t g_heapbase;
+
+/* Address of the saved user stack pointer */
+
+#if CONFIG_ARCH_INTERRUPTSTACK > 3
+extern uint32_t g_userstack;
+#endif
+
+/* These 'addresses' of these values are setup by the linker script.  They are
+ * not actual uint32_t storage locations! They are only used meaningfully in the
+ * following way:
+ *
+ *  - The linker script defines, for example, the symbol_sdata.
+ *  - The declareion extern uint32_t _sdata; makes C happy.  C will believe
+ *    that the value _sdata is the address of a uint32_t variable _data (it is
+ *    not!).
+ *  - We can recoved the linker value then by simply taking the address of
+ *    of _data.  like:  uint32_t *pdata = &_sdata;
+ */
+
+extern uint32_t _stext;           /* Start of .text */
+extern uint32_t _etext;           /* End_1 of .text + .rodata */
+extern const uint32_t _eronly;    /* End+1 of read only section (.text + .rodata) */
+extern uint32_t _sdata;           /* Start of .data */
+extern uint32_t _edata;           /* End+1 of .data */
+extern uint32_t _sbss;            /* Start of .bss */
+extern uint32_t _ebss;            /* End+1 of .bss */
+#endif
+
+/****************************************************************************
+ * Inline Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/* Defined in files with the same name as the function */
+
+extern void up_boot(void);
+extern void up_copystate(uint32_t *dest, uint32_t *src);
+extern void up_decodeirq(uint32_t *regs);
+extern void up_irqinitialize(void);
+#ifdef CONFIG_ARCH_DMA
+extern void weak_function up_dmainitialize(void);
+#endif
+extern int  up_saveusercontext(uint32_t *saveregs);
+extern void up_fullcontextrestore(uint32_t *restoreregs) __attribute__ ((noreturn));
+extern void up_switchcontext(uint32_t *saveregs, uint32_t *restoreregs);
+extern void up_sigdeliver(void);
+extern int  up_timerisr(int irq, uint32_t *regs);
+extern void up_lowputc(char ch);
+extern void up_puts(const char *str);
+extern void up_lowputs(const char *str);
+
+extern void up_doirq(int irq, uint32_t *regs);
+#ifdef CONFIG_PAGING
+extern void up_pginitialize(void);
+extern uint32_t *up_va2pte(uintptr_t vaddr);
+extern void up_dataabort(uint32_t *regs, uint32_t far, uint32_t fsr);
+#else /* CONFIG_PAGING */
+# define up_pginitialize()
+extern void up_dataabort(uint32_t *regs);
+#endif /* CONFIG_PAGING */
+extern void up_prefetchabort(uint32_t *regs);
+extern void up_syscall(uint32_t *regs);
+extern void up_undefinedinsn(uint32_t *regs);
+
+/* Defined in up_vectors.S */
+
+extern void up_vectorundefinsn(void);
+extern void up_vectorswi(void);
+extern void up_vectorprefetch(void);
+extern void up_vectordata(void);
+extern void up_vectoraddrexcptn(void);
+extern void up_vectorirq(void);
+extern void up_vectorfiq(void);
+
+/* Defined in up_allocateheap.c */
+
+#if CONFIG_MM_REGIONS > 1
+void up_addregion(void);
+#else
+# define up_addregion()
+#endif
+
+/* Defined in up_serial.c */
+
+#if CONFIG_NFILE_DESCRIPTORS > 0
+extern void up_earlyserialinit(void);
+extern void up_serialinit(void);
+#else
+# define up_earlyserialinit()
+# define up_serialinit()
+#endif
+
+/* Defined in drivers/lowconsole.c */
+
+#ifdef CONFIG_DEV_LOWCONSOLE
+extern void lowconsole_init(void);
+#else
+# define lowconsole_init()
+#endif
+
+/* Defined in up_watchdog.c */
+
+extern void up_wdtinit(void);
+
+/* Defined in up_timerisr.c */
+
+extern void up_timerinit(void);
+
+/* Defined in up_irq.c */
+
+extern void up_maskack_irq(int irq);
+
+/* Defined in board/up_leds.c */
+
+#ifdef CONFIG_ARCH_LEDS
+extern void up_ledinit(void);
+extern void up_ledon(int led);
+extern void up_ledoff(int led);
+#else
+# define up_ledinit()
+# define up_ledon(led)
+# define up_ledoff(led)
+#endif
+
+/* Defined in board/up_network.c */
+
+#ifdef CONFIG_NET
+extern void up_netinitialize(void);
+#else
+# define up_netinitialize()
+#endif
+
+#ifdef CONFIG_USBDEV
+extern void up_usbinitialize(void);
+extern void up_usbuninitialize(void);
+#else
+# define up_usbinitialize()
+# define up_usbuninitialize()
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif  /* __ARCH_X86_SRC_COMMON_UP_INTERNAL_H */
diff --git a/nuttx/arch/x86/src/common/up_interruptcontext.c b/nuttx/arch/x86/src/common/up_interruptcontext.c
new file mode 100644
index 000000000..6fbe67989
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_interruptcontext.c
@@ -0,0 +1,72 @@
+/****************************************************************************
+ *  arch/x86/src/common/up_interruptcontext.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdbool.h>
+#include <nuttx/arch.h>
+#include <nuttx/irq.h>
+
+#include "up_internal.h"
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Global Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_interrupt_context
+ *
+ * Description:
+ *   Return true is we are currently executing in the interrupt handler
+ *   context.
+ *
+ ****************************************************************************/
+
+bool up_interrupt_context(void)
+{
+   return current_regs != NULL;
+}
diff --git a/nuttx/arch/x86/src/common/up_lowputs.c b/nuttx/arch/x86/src/common/up_lowputs.c
new file mode 100644
index 000000000..46c8940cc
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_lowputs.c
@@ -0,0 +1,74 @@
+/****************************************************************************
+ * arch/x86/src/common/up_lowputs.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include "up_internal.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_lowputs
+ *
+ * Description:
+ *   This is a low-level helper function used to support debug.
+ *
+ ****************************************************************************/
+
+void up_lowputs(const char *str)
+{
+  while(*str)
+    {
+      up_lowputc(*str++);
+    }
+}
diff --git a/nuttx/arch/x86/src/common/up_mdelay.c b/nuttx/arch/x86/src/common/up_mdelay.c
new file mode 100644
index 000000000..22fc78d04
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_mdelay.c
@@ -0,0 +1,90 @@
+/****************************************************************************
+ *  arch/x86/src/common/up_mdelay.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/arch.h>
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Variables
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_mdelay
+ *
+ * Description:
+ *   Delay inline for the requested number of milliseconds.
+ *   *** NOT multi-tasking friendly ***
+ *
+ * ASSUMPTIONS:
+ *   The setting CONFIG_BOARD_LOOPSPERMSEC has been calibrated
+ *
+ ****************************************************************************/
+
+void up_mdelay(unsigned int milliseconds)
+{
+  volatile int i;
+  volatile int j;
+
+  for (i = 0; i < milliseconds; i++)
+    {
+      for (j = 0; j < CONFIG_BOARD_LOOPSPERMSEC; j++)
+        {
+        }
+    }
+}
diff --git a/nuttx/arch/x86/src/common/up_modifyreg16.c b/nuttx/arch/x86/src/common/up_modifyreg16.c
new file mode 100644
index 000000000..9a7ae4507
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_modifyreg16.c
@@ -0,0 +1,85 @@
+/****************************************************************************
+ * arch/x86/src/common/up_modifyreg16.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <debug.h>
+
+#include <arch/irq.h>
+#include <nuttx/arch.h>
+
+#include "up_arch.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: modifyreg16
+ *
+ * Description:
+ *   Atomically modify the specified bits in a memory mapped register
+ *
+ ****************************************************************************/
+
+void modifyreg16(unsigned int addr, uint16_t clearbits, uint16_t setbits)
+{
+  irqstate_t flags;
+  uint16_t   regval;
+
+  flags   = irqsave();
+  regval  = getreg16((uint16_t)addr);
+  regval &= ~clearbits;
+  regval |= setbits;
+  putreg16(regval, (uint16_t)addr);
+  irqrestore(flags);
+}
diff --git a/nuttx/arch/x86/src/common/up_modifyreg32.c b/nuttx/arch/x86/src/common/up_modifyreg32.c
new file mode 100644
index 000000000..c2a400335
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_modifyreg32.c
@@ -0,0 +1,85 @@
+/****************************************************************************
+ * arch/x86/src/common/up_modifyreg32.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <debug.h>
+
+#include <arch/irq.h>
+#include <nuttx/arch.h>
+
+#include "up_arch.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: modifyreg32
+ *
+ * Description:
+ *   Atomically modify the specified bits in a memory mapped register
+ *
+ ****************************************************************************/
+
+void modifyreg32(unsigned int addr, uint32_t clearbits, uint32_t setbits)
+{
+  irqstate_t flags;
+  uint32_t   regval;
+
+  flags   = irqsave();
+  regval  = getreg32((uint16_t)addr);
+  regval &= ~clearbits;
+  regval |= setbits;
+  putreg32(regval, (uint16_t)addr);
+  irqrestore(flags);
+}
diff --git a/nuttx/arch/x86/src/common/up_modifyreg8.c b/nuttx/arch/x86/src/common/up_modifyreg8.c
new file mode 100644
index 000000000..fd4031dc5
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_modifyreg8.c
@@ -0,0 +1,85 @@
+/****************************************************************************
+ * arch/x86/src/common/up_modifyreg8.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <debug.h>
+
+#include <arch/irq.h>
+#include <nuttx/arch.h>
+
+#include "up_arch.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: modifyreg8
+ *
+ * Description:
+ *   Atomically modify the specified bits in a memory mapped register
+ *
+ ****************************************************************************/
+
+void modifyreg8(unsigned int addr, uint8_t clearbits, uint8_t setbits)
+{
+  irqstate_t flags;
+  uint8_t    regval;
+
+  flags   = irqsave();
+  regval  = getreg8((uint16_t)addr);
+  regval &= ~clearbits;
+  regval |= setbits;
+  putreg8(regval, (uint16_t)addr);
+  irqrestore(flags);
+}
diff --git a/nuttx/arch/x86/src/common/up_puts.c b/nuttx/arch/x86/src/common/up_puts.c
new file mode 100644
index 000000000..58420c598
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_puts.c
@@ -0,0 +1,75 @@
+/****************************************************************************
+ * arch/x86/src/common/up_puts.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/arch.h>
+
+#include "up_internal.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_puts
+ *
+ * Description:
+ *   This is a low-level helper function used to support debug.
+ *
+ ****************************************************************************/
+
+void up_puts(const char *str)
+{
+  while(*str)
+    {
+      up_putc(*str++);
+    }
+}
diff --git a/nuttx/arch/x86/src/common/up_udelay.c b/nuttx/arch/x86/src/common/up_udelay.c
new file mode 100644
index 000000000..92d3b7c16
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_udelay.c
@@ -0,0 +1,129 @@
+/****************************************************************************
+ *  arch/x86/src/common/up_udelay.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nuttx/arch.h>
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+#define CONFIG_BOARD_LOOPSPER100USEC ((CONFIG_BOARD_LOOPSPERMSEC+5)/10)
+#define CONFIG_BOARD_LOOPSPER10USEC  ((CONFIG_BOARD_LOOPSPERMSEC+50)/100)
+#define CONFIG_BOARD_LOOPSPERUSEC    ((CONFIG_BOARD_LOOPSPERMSEC+500)/1000)
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Variables
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_udelay
+ *
+ * Description:
+ *   Delay inline for the requested number of microseconds.  NOTE:  Because
+ *   of all of the setup, several microseconds will be lost before the actual
+ *   timing looop begins.  Thus, the delay will always be a few microseconds
+ *   longer than requested.
+ *
+ *   *** NOT multi-tasking friendly ***
+ *
+ * ASSUMPTIONS:
+ *   The setting CONFIG_BOARD_LOOPSPERMSEC has been calibrated
+ *
+ ****************************************************************************/
+
+void up_udelay(useconds_t microseconds)
+{
+  volatile int i;
+
+  /* We'll do this a little at a time because we expect that the
+   * CONFIG_BOARD_LOOPSPERUSEC is very inaccurate during to truncation in
+   * the divisions of its calculation.  We'll use the largest values that
+   * we can in order to prevent significant error buildup in the loops.
+   */
+
+  while (microseconds > 1000)
+    {
+      for (i = 0; i < CONFIG_BOARD_LOOPSPERMSEC; i++)
+        {
+        }
+      microseconds -= 1000;
+    }
+
+  while (microseconds > 100)
+    {
+      for (i = 0; i < CONFIG_BOARD_LOOPSPER100USEC; i++)
+        {
+        }
+      microseconds -= 100;
+    }
+
+  while (microseconds > 10)
+    {
+      for (i = 0; i < CONFIG_BOARD_LOOPSPER10USEC; i++)
+        {
+        }
+      microseconds -= 10;
+    }
+
+  while (microseconds > 0)
+    {
+      for (i = 0; i < CONFIG_BOARD_LOOPSPERUSEC; i++)
+        {
+        }
+      microseconds--;
+    }
+}
diff --git a/nuttx/arch/x86/src/i486/up_createstack.c b/nuttx/arch/x86/src/i486/up_createstack.c
new file mode 100644
index 000000000..842872d31
--- /dev/null
+++ b/nuttx/arch/x86/src/i486/up_createstack.c
@@ -0,0 +1,135 @@
+/****************************************************************************
+ * arch/x86/src/i486/up_createstack.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <sched.h>
+#include <debug.h>
+
+#include <nuttx/kmalloc.h>
+#include <nuttx/arch.h>
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Global Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_create_stack
+ *
+ * Description:
+ *   Allocate a stack for a new thread and setup up stack-related information
+ *   in the TCB.
+ *
+ *   The following TCB fields must be initialized:
+ *   adj_stack_size: Stack size after adjustment for hardware, processor,
+ *     etc.  This value is retained only for debug purposes.
+ *   stack_alloc_ptr: Pointer to allocated stack
+ *   adj_stack_ptr: Adjusted stack_alloc_ptr for HW.  The initial value of
+ *     the stack pointer.
+ *
+ * Inputs:
+ *   tcb: The TCB of new task
+ *   stack_size:  The requested stack size.  At least this much must be
+ *     allocated.
+ *
+ ****************************************************************************/
+
+int up_create_stack(_TCB *tcb, size_t stack_size)
+{
+  if (tcb->stack_alloc_ptr && tcb->adj_stack_size != stack_size)
+    {
+      sched_free(tcb->stack_alloc_ptr);
+      tcb->stack_alloc_ptr = NULL;
+    }
+
+   if (!tcb->stack_alloc_ptr)
+     {
+#ifdef CONFIG_DEBUG
+       tcb->stack_alloc_ptr = (uint32_t*)zalloc(stack_size);
+#else
+       tcb->stack_alloc_ptr = (uint32_t*)malloc(stack_size);
+#endif
+     }
+
+   if (tcb->stack_alloc_ptr)
+     {
+       size_t top_of_stack;
+       size_t size_of_stack;
+
+       /* The i486 uses a push-down stack:  the stack grows toward lower
+        * addresses in memory.  The stack pointer register, points to the
+        * lowest, valid work address (the "top" of the stack).  Items on
+        * the stack are referenced as positive word offsets from sp.
+        */
+
+       top_of_stack = (uint32_t)tcb->stack_alloc_ptr + stack_size - 4;
+
+       /* The i486 stack must be aligned at word (4 byte) boundaries. If
+        * necessary top_of_stack must be rounded down to the next boundary
+        */
+
+       top_of_stack &= ~3;
+       size_of_stack = top_of_stack - (uint32_t)tcb->stack_alloc_ptr + 4;
+
+       /* Save the adjusted stack values in the _TCB */
+
+       tcb->adj_stack_ptr  = (uint32_t*)top_of_stack;
+       tcb->adj_stack_size = size_of_stack;
+
+       up_ledon(LED_STACKCREATED);
+       return OK;
+     }
+
+   return ERROR;
+}
diff --git a/nuttx/arch/x86/src/i486/up_releasestack.c b/nuttx/arch/x86/src/i486/up_releasestack.c
new file mode 100644
index 000000000..ac93688d6
--- /dev/null
+++ b/nuttx/arch/x86/src/i486/up_releasestack.c
@@ -0,0 +1,79 @@
+/****************************************************************************
+ *  arch/x86/src/common/up_releasestack.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sched.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+
+#include "os_internal.h"
+#include "up_internal.h"
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Global Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_release_stack
+ *
+ * Description:
+ *   A task has been stopped. Free all stack related resources retained in
+ *   the defunct TCB.
+ *
+ ****************************************************************************/
+
+void up_release_stack(_TCB *dtcb)
+{
+  if (dtcb->stack_alloc_ptr)
+    {
+      sched_free(dtcb->stack_alloc_ptr);
+      dtcb->stack_alloc_ptr = NULL;
+    }
+
+  dtcb->adj_stack_size = 0;
+}
diff --git a/nuttx/arch/x86/src/i486/up_usestack.c b/nuttx/arch/x86/src/i486/up_usestack.c
new file mode 100644
index 000000000..fb8ded0e1
--- /dev/null
+++ b/nuttx/arch/x86/src/i486/up_usestack.c
@@ -0,0 +1,119 @@
+/****************************************************************************
+ * arch/x86/src/common/up_usestack.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <sched.h>
+#include <debug.h>
+
+#include <nuttx/kmalloc.h>
+#include <nuttx/arch.h>
+
+#include "up_internal.h"
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Global Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_use_stack
+ *
+ * Description:
+ *   Setup up stack-related information in the TCB using pre-allocated stack
+ *   memory
+ *
+ *   The following TCB fields must be initialized:
+ *   adj_stack_size: Stack size after adjustment for hardware, processor,
+ *     etc.  This value is retained only for debug purposes.
+ *   stack_alloc_ptr: Pointer to allocated stack
+ *   adj_stack_ptr: Adjusted stack_alloc_ptr for HW.  The initial value of
+ *     the stack pointer.
+ *
+ * Inputs:
+ *   tcb: The TCB of new task
+ *   stack_size:  The allocated stack size.
+ *
+ ****************************************************************************/
+
+int up_use_stack(_TCB *tcb, void *stack, size_t stack_size)
+{
+  size_t top_of_stack;
+  size_t size_of_stack;
+
+  if (tcb->stack_alloc_ptr)
+    {
+      sched_free(tcb->stack_alloc_ptr);
+    }
+
+  /* Save the stack allocation */
+
+  tcb->stack_alloc_ptr = stack;
+
+  /* The i486 uses a push-down stack:  the stack grows toward loweraddresses in
+   * memory.  The stack pointer register, points to the lowest, valid work
+   * address (the "top" of the stack).  Items on the stack are referenced as
+   * positive word offsets from sp.
+   */
+
+  top_of_stack = (uint32_t)tcb->stack_alloc_ptr + stack_size - 4;
+
+  /* The i486 stack must be aligned at word (4 byte) boundaries. If necessary
+   * top_of_stack must be rounded down to the next boundary
+   */
+
+  top_of_stack &= ~3;
+  size_of_stack = top_of_stack - (uint32_t)tcb->stack_alloc_ptr + 4;
+
+  /* Save the adjusted stack values in the _TCB */
+
+  tcb->adj_stack_ptr  = (uint32_t*)top_of_stack;
+  tcb->adj_stack_size = size_of_stack;
+
+  return OK;
+}
diff --git a/nuttx/arch/x86/src/qemu/Make.defs b/nuttx/arch/x86/src/qemu/Make.defs
new file mode 100755
index 000000000..5e88c117e
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/Make.defs
@@ -0,0 +1,52 @@
+############################################################################
+# arch/x86/src/qemu/Make.defs
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# The start-up, "head", file
+
+HEAD_ASRC	= qemu_head.S
+
+# Common x86 and i486 files
+
+CMN_ASRCS	= 
+CMN_CSRCS	= up_createstack.c up_mdelay.c up_udelay.c up_exit.c up_initialize.c \
+		  up_interruptcontext.c up_modifyreg8.c up_modifyreg16.c \
+		  up_modifyreg32.c up_releasestack.c up_usestack.c
+
+# Required QEMU files
+
+CHIP_ASRCS	= qemu_saveusercontext.S qemu_fullcontextrestore.S
+CHIP_CSRCS	= qemu_idle.c
+
+# Configuration-dependent QEMU files
diff --git a/nuttx/arch/x86/src/qemu/chip.h b/nuttx/arch/x86/src/qemu/chip.h
new file mode 100755
index 000000000..0cbf26cb3
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/chip.h
@@ -0,0 +1,74 @@
+/************************************************************************************
+ * arch/x86/src/qemu/chip.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_X86_SRC_QEMU_QEMU_CHIP_H
+#define __ARCH_X86_SRC_QEMU_QEMU_CHIP_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/* Get customizations for each supported QEMU emulation */
+
+#ifdef CONFIG_ARCH_CHIP_QEMU
+#else
+#  error "Unsupported STM32 chip"
+#endif
+
+/* Include only the memory map.  Other chip hardware files should then include this
+ * file for the proper setup
+ */
+
+#include "qemu_memorymap.h"
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+#endif /* __ARCH_X86_SRC_QEMU_QEMU_CHIP_H */
diff --git a/nuttx/arch/x86/src/qemu/qemu_fullcontextrestore.S b/nuttx/arch/x86/src/qemu/qemu_fullcontextrestore.S
new file mode 100644
index 000000000..b70ab0984
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/qemu_fullcontextrestore.S
@@ -0,0 +1,122 @@
+/**************************************************************************
+ * arch/x86/src/qemu/qemu_fullcontextrestore.S
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************/
+
+/**************************************************************************
+ * Conditional Compilation Options
+ **************************************************************************/
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <nuttx/config.h>
+#include <arch/irq.h>
+#include "up_internal.h"
+
+/**************************************************************************
+ * Private Definitions
+ **************************************************************************/
+ 
+#ifdef __CYGWIN__
+# define SYMBOL(s) _##s
+#else
+# define SYMBOL(s) s
+#endif
+
+/**************************************************************************
+ * Private Types
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Function Prototypes
+ **************************************************************************/
+
+/**************************************************************************
+ * Global Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Public Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: up_fullcontextrestore
+ *
+ * Full C prototype:
+ *  void up_fullcontextrestore(uint32_t *regs) __attribute__ ((noreturn));
+ *
+ **************************************************************************/
+
+#ifdef CONFIG_X86_NASM
+#  warning "No Nasm support"
+#else
+	.text
+	.globl	SYMBOL(up_fullcontextrestore)
+#ifndef __CYGWIN__
+	.type	SYMBOL(up_fullcontextrestore), @function
+#endif
+SYMBOL(up_fullcontextrestore):
+	movl	4(%esp), %ecx      /* U_pthread_jmpbuf in %ecx.  */
+	movl	8(%esp), %eax      /* Second argument is return value.  */
+
+	/* Save the return address now.  */
+
+	movl (JB_PC)(%ecx), %edx
+
+	/* Restore registers.  */
+
+	movl (JB_EBX)(%ecx), %ebx
+	movl (JB_ESI)(%ecx), %esi
+	movl (JB_EDI)(%ecx), %edi
+	movl (JB_EBP)(%ecx), %ebp
+	movl (JB_SP)(%ecx), %esp
+
+	/* Jump to saved PC.  */
+
+	jmp *%edx
+#ifndef __CYGWIN__
+	.size SYMBOL(up_fullcontextrestore), . - SYMBOL(up_fullcontextrestore)
+#endif
+    .end
+#endif /* CONFIG_X86_NASM */
+
diff --git a/nuttx/arch/x86/src/qemu/qemu_head.S b/nuttx/arch/x86/src/qemu/qemu_head.S
new file mode 100755
index 000000000..a1c816827
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/qemu_head.S
@@ -0,0 +1,126 @@
+/****************************************************************************

+ *  arch/x86/src/qemu/qemu_head.S

+ *

+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.

+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions

+ * are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright

+ *    notice, this list of conditions and the following disclaimer.

+ * 2. Redistributions in binary form must reproduce the above copyright

+ *    notice, this list of conditions and the following disclaimer in

+ *    the documentation and/or other materials provided with the

+ *    distribution.

+ * 3. Neither the name NuttX nor the names of its contributors may be

+ *    used to endorse or promote products derived from this software

+ *    without specific prior written permission.

+ *

+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ ****************************************************************************/

+

+/****************************************************************************

+ * Included Files

+ ****************************************************************************/

+

+#include <nuttx/config.h>

+

+/****************************************************************************

+ * .text

+ ****************************************************************************/

+

+#ifdef CONFIG_X86_NASM

+global		loader						/* Making entry point visible to linker */

+extern		os_start					/* os_start is defined elsewhere */

+extern		up_lowsetup					/* up_lowsetup is defined elsewhere */

+ 

+/* Setting up the Multiboot header - see GRUB docs for details */

+

+MODULEALIGN	equ	1<<0					/* Align loaded modules on page boundaries */

+MEMINFO		equ	1<<1					/* Provide memory map */

+FLAGS		equ	MODULEALIGN | MEMINFO	/* This is the Multiboot 'flag' field */

+MAGIC		equ	0x1BADB002				/* 'magic number' lets bootloader find the header */

+CHECKSUM	equ -(MAGIC + FLAGS)		/* Checksum required */

+ 

+section .text

+align 4

+MultiBootHeader:

+	dd		MAGIC

+	dd		FLAGS

+	dd		CHECKSUM

+ 

+/* Reserve initial kernel stack space */

+

+STACKSIZE	equ	0x4000					/* That's 16k */

+ 

+loader:

+	mov		esp, stack+STACKSIZE		/* Set up the stack */

+	push	eax							/* Pass Multiboot magic number */

+	push	ebx							/* Pass Multiboot info structure */

+ 

+	call	up_lowsetup					/* Low-level, pre-OS initialization */

+	call	os_start					/* Start NuttX */

+ 

+	cli

+hang:

+	hlt									/* Halt machine should NuttX return */

+	jmp		hang

+ 

+section .bss

+align 4

+stack:

+	resb STACKSIZE						/* Reserve 16k stack on a doubleword boundary */

+

+#else /* GAS */

+

+	.global	loader						/* Making entry point visible to linker */

+	.global	os_start					/* os_start is defined elsewhere */

+	.global	up_lowsetup					/* up_lowsetup is defined elsewhere */

+

+/* Setting up the Multiboot header - see GRUB docs for details */

+

+	.set	ALIGN, 1<<0					/* Align loaded modules on page boundaries */

+	.set	MEMINFO, 1<<1				/* Provide memory map */

+	.set	FLAGS, ALIGN | MEMINFO		/* This is the Multiboot 'flag' field */

+	.set	MAGIC, 0x1BADB002			/* 'magic number' lets bootloader find the header */

+	.set	CHECKSUM, -(MAGIC + FLAGS)	/* Checksum required */

+

+	.align	4

+	.long	MAGIC

+	.long	FLAGS

+	.long	CHECKSUM

+

+/* Reserve initial kernel stack space */

+

+	.set	STACKSIZE, 0x4000			/* That is, 16k */

+	.comm	stack, STACKSIZE, 32		/* Reserve 16k stack on a quadword boundary */

+

+loader:

+	mov		$(stack + STACKSIZE), %esp	/* Set up the stack */

+	push	%eax						/* Multiboot magic number */

+	push	%ebx						/* Multiboot data structure */

+

+	call	up_lowsetup					/* Low-level, pre-OS initialization */

+	call	os_start					/* Start NuttX */

+

+	cli

+hang:

+	hlt									/* Halt machine should NuttX return */

+	jmp	hang

+#endif

+	.end

+#endif
\ No newline at end of file
diff --git a/nuttx/arch/x86/src/qemu/qemu_idle.c b/nuttx/arch/x86/src/qemu/qemu_idle.c
new file mode 100644
index 000000000..42145105b
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/qemu_idle.c
@@ -0,0 +1,88 @@
+/****************************************************************************
+ *  arch/x86/src/qemu/qemu_idle.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <nuttx/arch.h>
+#include "up_internal.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_idle
+ *
+ * Description:
+ *   up_idle() is the logic that will be executed when their is no other
+ *   ready-to-run task.  This is processor idle time and will continue until
+ *   some interrupt occurs to cause a context switch from the idle task.
+ *
+ *   Processing in this state may be processor-specific. e.g., this is where
+ *   power management operations might be performed.
+ *
+ ****************************************************************************/
+
+void up_idle(void)
+{
+#if defined(CONFIG_SUPPRESS_INTERRUPTS) || defined(CONFIG_SUPPRESS_TIMER_INTS)
+  /* If the system is idle and there are no timer interrupts, then process
+   * "fake" timer interrupts. Hopefully, something will wake up.
+   */
+
+  sched_process_timer();
+#else
+
+  /* Sleep until an interrupt occurs to save power */
+
+#endif
+}
+
diff --git a/nuttx/arch/x86/src/qemu/qemu_internal.h b/nuttx/arch/x86/src/qemu/qemu_internal.h
new file mode 100755
index 000000000..601f84b77
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/qemu_internal.h
@@ -0,0 +1,389 @@
+/************************************************************************************
+ * arch/x86/src/qemu/qemu_internal.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_X86_SRC_QEMU_QEMU_INTERNAL_H
+#define __ARCH_X86_SRC_QEMU_QEMU_INTERNAL_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/compiler.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+
+#include "up_internal.h"
+#include "chip.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Configuration ********************************************************************/
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+/************************************************************************************
+ * Inline Functions
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: i486_clockconfig
+ *
+ * Description:
+ *   Called to initialize the LPC17XX.  This does whatever setup is needed to put the
+ *   MCU in a usable state.  This includes the initialization of clocking using the
+ *   settings in board.h.
+ *
+ ************************************************************************************/
+
+EXTERN void i486_clockconfig(void);
+
+/************************************************************************************
+ * Name: i486_lowsetup
+ *
+ * Description:
+ *   Called at the very beginning of _start.  Performs low level initialization
+ *   including setup of the console UART.  This UART done early so that the serial
+ *   console is available for debugging very early in the boot sequence.
+ *
+ ************************************************************************************/
+
+EXTERN void i486_lowsetup(void);
+
+/************************************************************************************
+ * Name: i486_gpioirqinitialize
+ *
+ * Description:
+ *   Initialize logic to support a second level of interrupt decoding for GPIO pins.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_GPIO_IRQ
+EXTERN void i486_gpioirqinitialize(void);
+#else
+#  define i486_gpioirqinitialize()
+#endif
+
+/************************************************************************************
+ * Name: i486_configgpio
+ *
+ * Description:
+ *   Configure a GPIO pin based on bit-encoded description of the pin.
+ *
+ ************************************************************************************/
+
+EXTERN int i486_configgpio(uint16_t cfgset);
+
+/************************************************************************************
+ * Name: i486_gpiowrite
+ *
+ * Description:
+ *   Write one or zero to the selected GPIO pin
+ *
+ ************************************************************************************/
+
+EXTERN void i486_gpiowrite(uint16_t pinset, bool value);
+
+/************************************************************************************
+ * Name: i486_gpioread
+ *
+ * Description:
+ *   Read one or zero from the selected GPIO pin
+ *
+ ************************************************************************************/
+
+EXTERN bool i486_gpioread(uint16_t pinset);
+
+/************************************************************************************
+ * Name: i486_gpioirqenable
+ *
+ * Description:
+ *   Enable the interrupt for specified GPIO IRQ
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_GPIO_IRQ
+EXTERN void i486_gpioirqenable(int irq);
+#else
+#  define i486_gpioirqenable(irq)
+#endif
+
+/************************************************************************************
+ * Name: i486_gpioirqdisable
+ *
+ * Description:
+ *   Disable the interrupt for specified GPIO IRQ
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_GPIO_IRQ
+EXTERN void i486_gpioirqdisable(int irq);
+#else
+#  define i486_gpioirqdisable(irq)
+#endif
+
+/************************************************************************************
+ * Function:  i486_dumpgpio
+ *
+ * Description:
+ *   Dump all GPIO registers associated with the base address of the provided pinset.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_DEBUG_GPIO
+EXTERN int i486_dumpgpio(uint16_t pinset, const char *msg);
+#else
+#  define i486_dumpgpio(p,m)
+#endif
+
+/************************************************************************************
+ * Name:  i486_spi/ssp0/ssp1select, i486_spi/ssp0/ssp1status, and
+ *        i486_spi/ssp0/ssp1cmddata
+ *
+ * Description:
+ *   These external functions must be provided by board-specific logic.  They are
+ *   implementations of the select, status, and cmddata methods of the SPI interface
+ *   defined by struct spi_ops_s (see include/nuttx/spi.h). All other methods 
+ *   including up_spiinitialize()) are provided by common LPC17xx logic.  To use
+ *   this common SPI logic on your board:
+ *
+ *   1. Provide logic in i486_boardinitialize() to configure SPI/SSP chip select
+ *      pins.
+ *   2. Provide i486_spi/ssp0/ssp1select() and i486_spi/ssp0/ssp1status() functions
+ *      in your board-specific logic.  These functions will perform chip selection
+ *      and status operations using GPIOs in the way your board is configured.
+ *   2. If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, provide
+ *      i486_spi/ssp0/ssp1cmddata() functions in your board-specific logic.  These
+ *      functions will perform cmd/data selection operations using GPIOs in the way
+ *      your board is configured.
+ *   3. Add a call to up_spiinitialize() in your low level application
+ *      initialization logic
+ *   4. The handle returned by up_spiinitialize() may then be used to bind the
+ *      SPI driver to higher level logic (e.g., calling 
+ *      mmcsd_spislotinitialize(), for example, will bind the SPI driver to
+ *      the SPI MMC/SD driver).
+ *
+ ************************************************************************************/
+
+struct spi_dev_s;
+enum spi_dev_e;
+
+#ifdef CONFIG_I486_SPI
+EXTERN void  i486_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
+EXTERN uint8_t i486_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
+#ifdef CONFIG_SPI_CMDDATA
+EXTERN int i486_spicmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
+#endif
+#endif
+
+/****************************************************************************
+ * Name: ssp_flush
+ *
+ * Description:
+ *   Flush and discard any words left in the RX fifo.  This can be called
+ *   from ssp0/1select after a device is deselected (if you worry about such
+ *   things).
+ *
+ * Input Parameters:
+ *   dev - Device-specific state data
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+struct spi_dev_s;
+#ifdef CONFIG_I486_SPI
+EXTERN void spi_flush(FAR struct spi_dev_s *dev);
+#endif
+#if defined(CONFIG_I486_SSP0) || defined(CONFIG_I486_SSP1)
+EXTERN void ssp_flush(FAR struct spi_dev_s *dev);
+#endif
+
+/****************************************************************************
+ * Name: i486_dmainitialize
+ *
+ * Description:
+ *   Initialize the GPDMA subsystem.
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+EXTERN void i486_dmainitilaize(void);
+#endif
+
+/****************************************************************************
+ * Name: i486_dmachannel
+ *
+ * Description:
+ *   Allocate a DMA channel.  This function sets aside a DMA channel and
+ *   gives the caller exclusive access to the DMA channel.
+ *
+ * Returned Value:
+ *   One success, this function returns a non-NULL, void* DMA channel
+ *   handle.  NULL is returned on any failure.  This function can fail only
+ *   if no DMA channel is available.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+EXTERN DMA_HANDLE i486_dmachannel(void);
+#endif
+
+/****************************************************************************
+ * Name: i486_dmafree
+ *
+ * Description:
+ *   Release a DMA channel.  NOTE:  The 'handle' used in this argument must
+ *   NEVER be used again until i486_dmachannel() is called again to re-gain
+ *   a valid handle.
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+EXTERN void i486_dmafree(DMA_HANDLE handle);
+#endif
+
+/****************************************************************************
+ * Name: i486_dmasetup
+ *
+ * Description:
+ *   Configure DMA for one transfer.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+EXTERN int i486_dmarxsetup(DMA_HANDLE handle,
+                            uint32_t control, uint32_t config,
+                            uint32_t srcaddr, uint32_t destaddr,
+                            size_t nbytes);
+#endif
+
+/****************************************************************************
+ * Name: i486_dmastart
+ *
+ * Description:
+ *   Start the DMA transfer
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+EXTERN int i486_dmastart(DMA_HANDLE handle, dma_callback_t callback, void *arg);
+#endif
+
+/****************************************************************************
+ * Name: i486_dmastop
+ *
+ * Description:
+ *   Cancel the DMA.  After i486_dmastop() is called, the DMA channel is
+ *   reset and i486_dmasetup() must be called before i486_dmastart() can be
+ *   called again
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+EXTERN void i486_dmastop(DMA_HANDLE handle);
+#endif
+
+/****************************************************************************
+ * Name: i486_dmasample
+ *
+ * Description:
+ *   Sample DMA register contents
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+#ifdef CONFIG_DEBUG_DMA
+EXTERN void i486_dmasample(DMA_HANDLE handle, struct i486_dmaregs_s *regs);
+#else
+#  define i486_dmasample(handle,regs)
+#endif
+#endif
+
+/****************************************************************************
+ * Name: i486_dmadump
+ *
+ * Description:
+ *   Dump previously sampled DMA register contents
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+#ifdef CONFIG_DEBUG_DMA
+EXTERN void i486_dmadump(DMA_HANDLE handle, const struct i486_dmaregs_s *regs,
+                          const char *msg);
+#else
+#  define i486_dmadump(handle,regs,msg)
+#endif
+#endif
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ARCH_X86_SRC_QEMU_QEMU_INTERNAL_H */
diff --git a/nuttx/arch/x86/src/qemu/qemu_memorymap.h b/nuttx/arch/x86/src/qemu/qemu_memorymap.h
new file mode 100755
index 000000000..571ddd03d
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/qemu_memorymap.h
@@ -0,0 +1,67 @@
+/************************************************************************************

+ * arch/x86/src/qemu/qemu_memorymap.h

+ *

+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.

+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions

+ * are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright

+ *    notice, this list of conditions and the following disclaimer.

+ * 2. Redistributions in binary form must reproduce the above copyright

+ *    notice, this list of conditions and the following disclaimer in

+ *    the documentation and/or other materials provided with the

+ *    distribution.

+ * 3. Neither the name NuttX nor the names of its contributors may be

+ *    used to endorse or promote products derived from this software

+ *    without specific prior written permission.

+ *

+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ ************************************************************************************/

+

+#ifndef __ARCH_X86_SRC_QEMU_QEMU_MEMORYMAP_H

+#define __ARCH_X86_SRC_QEMU_QEMU_MEMORYMAP_H

+

+/************************************************************************************

+ * Included Files

+ ************************************************************************************/

+

+#include <nuttx/config.h>

+

+#include "chip.h"

+

+/************************************************************************************

+ * Pre-processor Definitions

+ ************************************************************************************/

+

+/* Memory Map ***********************************************************************/

+

+/* Peripheral Base Addresses ********************************************************/

+

+/************************************************************************************

+ * Public Types

+ ************************************************************************************/

+

+/************************************************************************************

+ * Public Data

+ ************************************************************************************/

+

+/************************************************************************************

+ * Public Functions

+ ************************************************************************************/

+

+#endif /* __ARCH_X86_SRC_QEMU_QEMU_MEMORYMAP_H */

diff --git a/nuttx/arch/x86/src/qemu/qemu_saveusercontext.S b/nuttx/arch/x86/src/qemu/qemu_saveusercontext.S
new file mode 100644
index 000000000..1d72bd643
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/qemu_saveusercontext.S
@@ -0,0 +1,130 @@
+/**************************************************************************
+ * arch/x86/src/qemu/up_saveusercontext.S
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************/
+
+/**************************************************************************
+ * Conditional Compilation Options
+ **************************************************************************/
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <nuttx/config.h>
+#include <arch/irq.h>
+#include "up_internal.h"
+
+/**************************************************************************
+ * Private Definitions
+ **************************************************************************/
+ 
+#ifdef __CYGWIN__
+# define SYMBOL(s) _##s
+#else
+# define SYMBOL(s) s
+#endif
+
+/**************************************************************************
+ * Private Types
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Function Prototypes
+ **************************************************************************/
+
+/**************************************************************************
+ * Global Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Public Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: up_saveusercontext
+ *
+ * Full C prototype:
+ *  int up_saveusercontext(uint32_t *regs);
+ *
+ **************************************************************************/
+
+#ifdef CONFIG_X86_NASM
+#  warning "No Nasm support"
+#else
+	.text
+	.globl	SYMBOL(up_saveusercontext)
+#ifndef __CYGWIN__
+	.type	SYMBOL(up_saveusercontext), @function
+#endif
+SYMBOL(up_saveusercontext):
+
+	/* %ebx, %esi, %edi, and %ebp must be preserved.
+	 * save %ebx, $esi, and %edi now... */
+
+	movl	4(%esp), %eax
+	movl	%ebx, (REG_EBX)(%eax)
+	movl	%esi, (REG_ESI)(%eax)
+	movl	%edi, (REG_EDI)(%eax)
+
+	/* Save the value of SP as will be after we return */
+
+	leal	4(%esp), %ecx
+	movl	%ecx, (REG_SP)(%eax)
+
+	/* Save the return PC */
+
+	movl	0(%esp), %ecx
+	movl	%ecx, (REG_PC)(%eax)
+
+	/* Save the framepointer */
+
+	movl %ebp, (REG_EBP)(%eax)
+
+	/* And return 0 */
+
+	xorl    %eax, %eax
+	ret
+#ifndef __CYGWIN__
+	.size	SYMBOL(up_saveusercontext), . - SYMBOL(up_saveusercontext)
+#endif
+    .end
+#endif