Update documenation to include Calypso and the Compal phones

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4513 42af7a65-404d-4744-a932-0658087f49c3

1 files changed, 28 insertions, 0 deletions

diff --git a/nuttx/configs/compal_e88/README.txt b/nuttx/configs/compal_e88/README.txt
new file mode 100755
index 000000000..fb45fb1d6
--- /dev/null
+++ b/nuttx/configs/compal_e88/README.txt
@@ -0,0 +1,28 @@
+compal_e88

+==========

+

+This directory contains the board support for compal e88 phones.

+

+This port is based on patches contributed by Denis Carikli for both the

+compal e99 and e88. At the time of initial check-in, the following phones

+were tested:

+

+* motorolla c155 (compal e99) with the compalram and highram configuration

+* motorolla W220 (compal e88)

+* The openmoko freerunner baseband(compal e88)

+

+The patches were made by Alan Carvalho de Assis and Denis Carikli using

+the Stefan Richter's patches that can be found here:

+

+http://cgit.osmocom.org/cgit/nuttx-bb/log/?h=lputt%2Ftesting

+

+http://bb.osmocom.org/trac/wiki/nuttx-bb/run detail the usage of nuttx with

+sercomm(the transport used by osmocom-bb that runs on top of serial).

+

+The way of loading nuttx(which is also documented in osmocom-bb wiki) depend

+on the configuration(highram/compalram) and phone:

+

+compalram is for the ramloader(for phone having a bootloader on flash)

+highram is for phones having the romloader(if the phone has a bootrom) or for

+loading in the ram trough a special loader(loaded first on ram by talking to

+the ramloader) when having a ramloader(which can only load 64k).