diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-10-06 17:29:36 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-10-06 17:29:36 +0000 |
commit | 0d7faa84c30520112d0dbecfcb7d8580c3950263 (patch) | |
tree | 21db6c28a6ecf58f05d611b934da60018a2f10bb /nuttx/configs/kwikstik-k40/README.txt | |
parent | 58d919bd347e216a47d1536939b499484b905db9 (diff) | |
download | px4-nuttx-0d7faa84c30520112d0dbecfcb7d8580c3950263.tar.gz px4-nuttx-0d7faa84c30520112d0dbecfcb7d8580c3950263.tar.bz2 px4-nuttx-0d7faa84c30520112d0dbecfcb7d8580c3950263.zip |
Update all config README.txt files to show that they use the EABI buildroot toolchain
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5218 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/configs/kwikstik-k40/README.txt')
-rw-r--r-- | nuttx/configs/kwikstik-k40/README.txt | 195 |
1 files changed, 123 insertions, 72 deletions
diff --git a/nuttx/configs/kwikstik-k40/README.txt b/nuttx/configs/kwikstik-k40/README.txt index a268a52d8..a320cbb05 100644 --- a/nuttx/configs/kwikstik-k40/README.txt +++ b/nuttx/configs/kwikstik-k40/README.txt @@ -22,7 +22,9 @@ Contents o Development Environment o GNU Toolchain Options o IDEs - o NuttX buildroot Toolchain + o NuttX EABI "buildroot" Toolchain + o NuttX OABI "buildroot" Toolchain + o NXFLAT Toolchain Kinetis KwikStik-K40 Features: ============================== @@ -171,7 +173,7 @@ GNU Toolchain Options CONFIG_KINETIS_CODESOURCERYW=y : CodeSourcery under Windows CONFIG_KINETIS_CODESOURCERYL=y : CodeSourcery under Linux CONFIG_KINETIS_DEVKITARM=y : devkitARM under Windows - CONFIG_KINETIS_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) + CONFIG_KINETIS_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) If you are not using CONFIG_KINETIS_BUILDROOT, then you may also have to modify the PATH in the setenv.h file if your make cannot find the tools. @@ -249,8 +251,8 @@ IDEs Startup files will probably cause you some headaches. The NuttX startup file is arch/arm/src/kinetis/k40_vectors.S. -NuttX buildroot Toolchain -========================= +NuttX EABI "buildroot" Toolchain +================================ A GNU GCC-based toolchain is assumed. The files */setenv.sh should be modified to point to the correct path to the Cortex-M4 GCC toolchain (if @@ -260,8 +262,7 @@ NuttX buildroot Toolchain SourceForge download site (https://sourceforge.net/projects/nuttx/files/buildroot/). This GNU toolchain builds and executes in the Linux or Cygwin environment. - NOTE: The NuttX toolchain is an OABI toolchain (vs. the more common EABI) - and does not include optimizations for Cortex-M4 (ARMv7E-M). + NOTE: The NuttX toolchain may not include optimizations for Cortex-M4 (ARMv7E-M). 1. You must have already configured Nuttx in <some-dir>/nuttx. @@ -276,7 +277,7 @@ NuttX buildroot Toolchain 4. cd <some-dir>/buildroot - 5. cp configs/cortexm3-defconfig-4.3.3 .config + 5. cp configs/cortexm3-eabi-defconfig-4.6.3 .config 6. make oldconfig @@ -286,92 +287,142 @@ NuttX buildroot Toolchain the path to the newly built binaries. See the file configs/README.txt in the buildroot source tree. That has more - detailed PLUS some special instructions that you will need to follow if you are + details PLUS some special instructions that you will need to follow if you are building a Cortex-M4 toolchain for Cygwin under Windows. +NuttX OABI "buildroot" Toolchain +================================ + + The older, OABI buildroot toolchain is also available. To use the OABI + toolchain: + + 1. When building the buildroot toolchain, either (1) modify the cortexm3-eabi-defconfig-4.6.3 + configuration to use EABI (using 'make menuconfig'), or (2) use an exising OABI + configuration such as cortexm3-defconfig-4.3.3 + + 2. Modify the Make.defs file to use the OABI converntions: + + +CROSSDEV = arm-nuttx-elf- + +ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft + -CROSSDEV = arm-nuttx-eabi- + -ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft + +NXFLAT Toolchain +================ + + If you are *not* using the NuttX buildroot toolchain and you want to use + the NXFLAT tools, then you will still have to build a portion of the buildroot + tools -- just the NXFLAT tools. The buildroot with the NXFLAT tools can + be downloaded from the NuttX SourceForge download site + (https://sourceforge.net/projects/nuttx/files/). + + This GNU toolchain builds and executes in the Linux or Cygwin environment. + + 1. You must have already configured Nuttx in <some-dir>/nuttx. + + cd tools + ./configure.sh lpcxpresso-lpc1768/<sub-dir> + + 2. Download the latest buildroot package into <some-dir> + + 3. unpack the buildroot tarball. The resulting directory may + have versioning information on it like buildroot-x.y.z. If so, + rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot. + + 4. cd <some-dir>/buildroot + + 5. cp configs/cortexm3-defconfig-nxflat .config + + 6. make oldconfig + + 7. make + + 8. Edit setenv.h, if necessary, so that the PATH variable includes + the path to the newly builtNXFLAT binaries. + KwikStik-K40-specific Configuration Options ============================================ - CONFIG_ARCH - Identifies the arch/ subdirectory. This sould - be set to: + CONFIG_ARCH - Identifies the arch/ subdirectory. This sould + be set to: - CONFIG_ARCH=arm + CONFIG_ARCH=arm - CONFIG_ARCH_family - For use in C code: + CONFIG_ARCH_family - For use in C code: - CONFIG_ARCH_ARM=y + CONFIG_ARCH_ARM=y - CONFIG_ARCH_architecture - For use in C code: + CONFIG_ARCH_architecture - For use in C code: - CONFIG_ARCH_CORTEXM4=y + CONFIG_ARCH_CORTEXM4=y - CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory + CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory - CONFIG_ARCH_CHIP=k40 + CONFIG_ARCH_CHIP=k40 - CONFIG_ARCH_CHIP_name - For use in C code to identify the exact - chip: + CONFIG_ARCH_CHIP_name - For use in C code to identify the exact + chip: - CONFIG_ARCH_CHIP_MK40X256VLQ100 + CONFIG_ARCH_CHIP_MK40X256VLQ100 - CONFIG_ARCH_BOARD - Identifies the configs subdirectory and - hence, the board that supports the particular chip or SoC. + CONFIG_ARCH_BOARD - Identifies the configs subdirectory and + hence, the board that supports the particular chip or SoC. - CONFIG_ARCH_BOARD=kwikstik-k40 (for the KwikStik-K40 development board) + CONFIG_ARCH_BOARD=kwikstik-k40 (for the KwikStik-K40 development board) - CONFIG_ARCH_BOARD_name - For use in C code + CONFIG_ARCH_BOARD_name - For use in C code - CONFIG_ARCH_BOARD_KWIKSTIK_K40=y + CONFIG_ARCH_BOARD_KWIKSTIK_K40=y - CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation - of delay loops + CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation + of delay loops - CONFIG_ENDIAN_BIG - define if big endian (default is little - endian) + CONFIG_ENDIAN_BIG - define if big endian (default is little + endian) - CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case): + CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case): - CONFIG_DRAM_SIZE=0x00010000 (64Kb) + CONFIG_DRAM_SIZE=0x00010000 (64Kb) - CONFIG_DRAM_START - The start address of installed DRAM + CONFIG_DRAM_START - The start address of installed DRAM - CONFIG_DRAM_START=0x20000000 + CONFIG_DRAM_START=0x20000000 - CONFIG_ARCH_IRQPRIO - The Kinetis K40 supports interrupt prioritization + CONFIG_ARCH_IRQPRIO - The Kinetis K40 supports interrupt prioritization - CONFIG_ARCH_IRQPRIO=y + CONFIG_ARCH_IRQPRIO=y - CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that - have LEDs + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that + have LEDs - CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt - stack. If defined, this symbol is the size of the interrupt - stack in bytes. If not defined, the user task stacks will be - used during interrupt handling. + CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt + stack. If defined, this symbol is the size of the interrupt + stack in bytes. If not defined, the user task stacks will be + used during interrupt handling. - CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions + CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions - CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. - CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that - cause a 100 second delay during boot-up. This 100 second delay - serves no purpose other than it allows you to calibratre - CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure - the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until - the delay actually is 100 seconds. + CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that + cause a 100 second delay during boot-up. This 100 second delay + serves no purpose other than it allows you to calibratre + CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure + the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until + the delay actually is 100 seconds. Individual subsystems can be enabled: CONFIG_KINETIS_TRACE -- Enable trace clocking on power up. CONFIG_KINETIS_FLEXBUS -- Enable flexbus clocking on power up. - CONFIG_KINETIS_UART0 -- Support UART0 - CONFIG_KINETIS_UART1 -- Support UART1 - CONFIG_KINETIS_UART2 -- Support UART2 - CONFIG_KINETIS_UART3 -- Support UART3 - CONFIG_KINETIS_UART4 -- Support UART4 - CONFIG_KINETIS_UART5 -- Support UART5 - CONFIG_KINETIS_ENET -- Support Ethernet (K60 only) - CONFIG_KINETIS_RNGB -- Support the random number generator(K60 only) + CONFIG_KINETIS_UART0 -- Support UART0 + CONFIG_KINETIS_UART1 -- Support UART1 + CONFIG_KINETIS_UART2 -- Support UART2 + CONFIG_KINETIS_UART3 -- Support UART3 + CONFIG_KINETIS_UART4 -- Support UART4 + CONFIG_KINETIS_UART5 -- Support UART5 + CONFIG_KINETIS_ENET -- Support Ethernet (K60 only) + CONFIG_KINETIS_RNGB -- Support the random number generator(K60 only) CONFIG_KINETIS_FLEXCAN0 -- Support FlexCAN0 CONFIG_KINETIS_FLEXCAN1 -- Support FlexCAN1 CONFIG_KINETIS_SPI0 -- Support SPI0 @@ -380,8 +431,8 @@ KwikStik-K40-specific Configuration Options CONFIG_KINETIS_I2C0 -- Support I2C0 CONFIG_KINETIS_I2C1 -- Support I2C1 CONFIG_KINETIS_I2S -- Support I2S - CONFIG_KINETIS_DAC0 -- Support DAC0 - CONFIG_KINETIS_DAC1 -- Support DAC1 + CONFIG_KINETIS_DAC0 -- Support DAC0 + CONFIG_KINETIS_DAC1 -- Support DAC1 CONFIG_KINETIS_ADC0 -- Support ADC0 CONFIG_KINETIS_ADC1 -- Support ADC1 CONFIG_KINETIS_CMP -- Support CMP @@ -429,15 +480,15 @@ KwikStik-K40-specific Configuration Options Kinetis K40 specific device driver settings - CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn (n=0..5) for the + CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn (n=0..5) for the console and ttys0 (default is the UART0). - CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. - This specific the size of the receive buffer - CONFIG_UARTn_TXBUFSIZE - Characters are buffered before - being sent. This specific the size of the transmit buffer - CONFIG_UARTn_BAUD - The configure BAUD of the UART. - CONFIG_UARTn_BITS - The number of bits. Must be either 8 or 8. - CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity + CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. + This specific the size of the receive buffer + CONFIG_UARTn_TXBUFSIZE - Characters are buffered before + being sent. This specific the size of the transmit buffer + CONFIG_UARTn_BAUD - The configure BAUD of the UART. + CONFIG_UARTn_BITS - The number of bits. Must be either 8 or 8. + CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity KwikStik-K40 LCD Hardware Configuration @@ -462,10 +513,10 @@ Configurations Each KwikStik-K40 configuration is maintained in a sudirectory and can be selected as follow: - cd tools - ./configure.sh kwikstik-k40/<subdir> - cd - - . ./setenv.sh + cd tools + ./configure.sh kwikstik-k40/<subdir> + cd - + . ./setenv.sh Where <subdir> is one of the following: @@ -475,4 +526,4 @@ Where <subdir> is one of the following: examples/ostest. By default, this project assumes that you are using the DFU bootloader. - CONFIG_KINETIS_BUILDROOT=y : NuttX buildroot under Linux or Cygwin + CONFIG_KINETIS_BUILDROOT=y : NuttX buildroot under Linux or Cygwin |