summaryrefslogtreecommitdiff
path: root/nuttx/configs/lm3s6965-ek/src/up_ssi.c
diff options
context:
space:
mode:
authorpatacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3>2012-09-13 18:32:24 +0000
committerpatacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3>2012-09-13 18:32:24 +0000
commitdf4622c8aa68493604f1e611eeb50c0960bb61a9 (patch)
tree1628300d9dbfac947ef9a9a8ec6013337cba17bb /nuttx/configs/lm3s6965-ek/src/up_ssi.c
parent0661f846bdd4ef584ab5d0e85e3fecf74a1d9922 (diff)
downloadpx4-nuttx-df4622c8aa68493604f1e611eeb50c0960bb61a9.tar.gz
px4-nuttx-df4622c8aa68493604f1e611eeb50c0960bb61a9.tar.bz2
px4-nuttx-df4622c8aa68493604f1e611eeb50c0960bb61a9.zip
Email address change in nuttx/
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5145 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/configs/lm3s6965-ek/src/up_ssi.c')
-rw-r--r--nuttx/configs/lm3s6965-ek/src/up_ssi.c328
1 files changed, 164 insertions, 164 deletions
diff --git a/nuttx/configs/lm3s6965-ek/src/up_ssi.c b/nuttx/configs/lm3s6965-ek/src/up_ssi.c
index 4dcd231c0..16111fcda 100644
--- a/nuttx/configs/lm3s6965-ek/src/up_ssi.c
+++ b/nuttx/configs/lm3s6965-ek/src/up_ssi.c
@@ -1,164 +1,164 @@
-/************************************************************************************
- * configs/lm3s6965-ek/src/up_ssi.c
- * arch/arm/src/board/up_ssi.c
- *
- * Copyright (C) 2010 Gregory Nutt. All rights reserved.
- * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <nuttx/config.h>
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <debug.h>
-
-#include <nuttx/spi.h>
-#include <arch/board/board.h>
-
-#include "up_arch.h"
-#include "chip.h"
-#include "lm3s_internal.h"
-#include "lm3s6965ek_internal.h"
-
-/* The LM3S6965 Eval Kit microSD CS is on SSI0 */
-
-#if !defined(CONFIG_SSI0_DISABLE) /* || !defined(CONFIG_SSI1_DISABLE) */
-
-/************************************************************************************
- * Definitions
- ************************************************************************************/
-
-/* Enables debug output from this file (needs CONFIG_DEBUG too) */
-
-#undef SSI_DEBUG /* Define to enable debug */
-#undef SSI_VERBOSE /* Define to enable verbose debug */
-
-#ifdef SSI_DEBUG
-# define ssidbg lldbg
-# ifdef SSI_VERBOSE
-# define ssivdbg lldbg
-# else
-# define ssivdbg(x...)
-# endif
-#else
-# undef SSI_VERBOSE
-# define ssidbg(x...)
-# define ssivdbg(x...)
-#endif
-
-/* Dump GPIO registers */
-
-#ifdef SSI_VERBOSE
-# define ssi_dumpgpio(m) lm3s_dumpgpio(SDCCS_GPIO, m)
-#else
-# define ssi_dumpgpio(m)
-#endif
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Name: lm3s_ssiinitialize
- *
- * Description:
- * Called to configure SPI chip select GPIO pins for the LM3S6965 Eval Kit.
- *
- ************************************************************************************/
-
-void weak_function lm3s_ssiinitialize(void)
-{
- /* Configure the SPI-based microSD CS GPIO */
-
- ssi_dumpgpio("lm3s_ssiinitialize() Entry)");
- lm3s_configgpio(SDCCS_GPIO);
-#ifdef CONFIG_NX_LCDDRIVER
- lm3s_configgpio(OLEDCS_GPIO);
-#endif
- ssi_dumpgpio("lm3s_ssiinitialize() Exit");
-}
-
-/****************************************************************************
- * The external functions, lm3s_spiselect and lm3s_spistatus must be provided
- * by board-specific logic. The are implementations of the select and status
- * methods SPI interface defined by struct spi_ops_s (see include/nuttx/spi.h).
- * All othermethods (including up_spiinitialize()) are provided by common
- * logic. To use this common SPI logic on your board:
- *
- * 1. Provide lm3s_spiselect() and lm3s_spistatus() functions in your
- * board-specific logic. This function will perform chip selection and
- * status operations using GPIOs in the way your board is configured.
- * 2. Add a call to up_spiinitialize() in your low level initialization
- * logic
- * 3. The handle returned by up_spiinitialize() may then be used to bind the
- * SPI driver to higher level logic (e.g., calling
- * mmcsd_spislotinitialize(), for example, will bind the SPI driver to
- * the SPI MMC/SD driver).
- *
- ****************************************************************************/
-
-void lm3s_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
-{
- ssidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
- ssi_dumpgpio("lm3s_spiselect() Entry");
-
- if (devid == SPIDEV_MMCSD)
- {
- /* Assert the CS pin to the card */
-
- lm3s_gpiowrite(SDCCS_GPIO, !selected);
- }
-#ifdef CONFIG_NX_LCDDRIVER
- else if (devid == SPIDEV_DISPLAY)
- {
- /* Assert the CS pin to the display */
-
- lm3s_gpiowrite(OLEDCS_GPIO, !selected);
- }
-#endif
- ssi_dumpgpio("lm3s_spiselect() Exit");
-}
-
-uint8_t lm3s_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
-{
- ssidbg("Returning SPI_STATUS_PRESENT\n");
- return SPI_STATUS_PRESENT;
-}
-
-#endif /* !CONFIG_SSI0_DISABLE || !CONFIG_SSI1_DISABLE */
+/************************************************************************************
+ * configs/lm3s6965-ek/src/up_ssi.c
+ * arch/arm/src/board/up_ssi.c
+ *
+ * Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <nuttx/spi.h>
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "chip.h"
+#include "lm3s_internal.h"
+#include "lm3s6965ek_internal.h"
+
+/* The LM3S6965 Eval Kit microSD CS is on SSI0 */
+
+#if !defined(CONFIG_SSI0_DISABLE) /* || !defined(CONFIG_SSI1_DISABLE) */
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Enables debug output from this file (needs CONFIG_DEBUG too) */
+
+#undef SSI_DEBUG /* Define to enable debug */
+#undef SSI_VERBOSE /* Define to enable verbose debug */
+
+#ifdef SSI_DEBUG
+# define ssidbg lldbg
+# ifdef SSI_VERBOSE
+# define ssivdbg lldbg
+# else
+# define ssivdbg(x...)
+# endif
+#else
+# undef SSI_VERBOSE
+# define ssidbg(x...)
+# define ssivdbg(x...)
+#endif
+
+/* Dump GPIO registers */
+
+#ifdef SSI_VERBOSE
+# define ssi_dumpgpio(m) lm3s_dumpgpio(SDCCS_GPIO, m)
+#else
+# define ssi_dumpgpio(m)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: lm3s_ssiinitialize
+ *
+ * Description:
+ * Called to configure SPI chip select GPIO pins for the LM3S6965 Eval Kit.
+ *
+ ************************************************************************************/
+
+void weak_function lm3s_ssiinitialize(void)
+{
+ /* Configure the SPI-based microSD CS GPIO */
+
+ ssi_dumpgpio("lm3s_ssiinitialize() Entry)");
+ lm3s_configgpio(SDCCS_GPIO);
+#ifdef CONFIG_NX_LCDDRIVER
+ lm3s_configgpio(OLEDCS_GPIO);
+#endif
+ ssi_dumpgpio("lm3s_ssiinitialize() Exit");
+}
+
+/****************************************************************************
+ * The external functions, lm3s_spiselect and lm3s_spistatus must be provided
+ * by board-specific logic. The are implementations of the select and status
+ * methods SPI interface defined by struct spi_ops_s (see include/nuttx/spi.h).
+ * All othermethods (including up_spiinitialize()) are provided by common
+ * logic. To use this common SPI logic on your board:
+ *
+ * 1. Provide lm3s_spiselect() and lm3s_spistatus() functions in your
+ * board-specific logic. This function will perform chip selection and
+ * status operations using GPIOs in the way your board is configured.
+ * 2. Add a call to up_spiinitialize() in your low level initialization
+ * logic
+ * 3. The handle returned by up_spiinitialize() may then be used to bind the
+ * SPI driver to higher level logic (e.g., calling
+ * mmcsd_spislotinitialize(), for example, will bind the SPI driver to
+ * the SPI MMC/SD driver).
+ *
+ ****************************************************************************/
+
+void lm3s_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+ ssidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+ ssi_dumpgpio("lm3s_spiselect() Entry");
+
+ if (devid == SPIDEV_MMCSD)
+ {
+ /* Assert the CS pin to the card */
+
+ lm3s_gpiowrite(SDCCS_GPIO, !selected);
+ }
+#ifdef CONFIG_NX_LCDDRIVER
+ else if (devid == SPIDEV_DISPLAY)
+ {
+ /* Assert the CS pin to the display */
+
+ lm3s_gpiowrite(OLEDCS_GPIO, !selected);
+ }
+#endif
+ ssi_dumpgpio("lm3s_spiselect() Exit");
+}
+
+uint8_t lm3s_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+ ssidbg("Returning SPI_STATUS_PRESENT\n");
+ return SPI_STATUS_PRESENT;
+}
+
+#endif /* !CONFIG_SSI0_DISABLE || !CONFIG_SSI1_DISABLE */