Add configuration for lm3s8962-ek

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2913 42af7a65-404d-4744-a932-0658087f49c3

1 files changed, 162 insertions, 0 deletions

diff --git a/nuttx/configs/lm3s8962-ek/src/up_oled.c b/nuttx/configs/lm3s8962-ek/src/up_oled.c
new file mode 100755
index 000000000..1dd024356
--- /dev/null
+++ b/nuttx/configs/lm3s8962-ek/src/up_oled.c
@@ -0,0 +1,162 @@
+/****************************************************************************
+ * config/lm3s8962-ek/src/up_oled.c
+ * arch/arm/src/board/up_oled.c
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/spi.h>
+#include <nuttx/lcd.h>
+#include <nuttx/p14201.h>
+
+#include "lm3s_internal.h"
+#include "lm3s8962ek_internal.h"
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/* Define the CONFIG_LCD_RITDEBUG to enable detailed debug output (stuff you
+ * would never want to see unless you are debugging this file).
+ *
+ * Verbose debug must also be enabled
+ */
+
+#ifndef CONFIG_DEBUG
+#  undef CONFIG_DEBUG_VERBOSE
+#  undef CONFIG_DEBUG_GRAPHICS
+#endif
+
+#ifndef CONFIG_DEBUG_VERBOSE
+#  undef CONFIG_LCD_RITDEBUG
+#endif
+
+#ifdef CONFIG_LCD_RITDEBUG
+#  define ritdbg(format, arg...)  vdbg(format, ##arg)
+#  define oleddc_dumpgpio(m) lm3s_dumpgpio(OLEDDC_GPIO, m)
+#  define oledcs_dumpgpio(m) lm3s_dumpgpio(OLEDCS_GPIO, m)
+#else
+#  define ritdbg(x...)
+#  define oleddc_dumpgpio(m)
+#  define oledcs_dumpgpio(m)
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_nxdrvinit
+ *
+ * Description:
+ *   Called NX initialization logic to configure the OLED.
+ *
+ ****************************************************************************/
+
+FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno)
+{
+  FAR struct spi_dev_s *spi;
+  FAR struct lcd_dev_s *dev;
+
+  /* Configure the OLED GPIOs */
+
+  oledcs_dumpgpio("up_nxdrvinit: After OLEDCS setup");
+  oleddc_dumpgpio("up_nxdrvinit: On entry");
+
+  lm3s_configgpio(OLEDDC_GPIO); /* PC7: OLED display data/control select (D/Cn) */
+  lm3s_configgpio(OLEDEN_GPIO); /* PC6: Enable +15V needed by OLED (EN+15V) */
+
+  oleddc_dumpgpio("up_nxdrvinit: After OLEDDC/EN setup");
+
+  /* Get the SSI port (configure as a Freescale SPI port) */
+
+  spi = up_spiinitialize(0);
+  if (!spi)
+    {
+      glldbg("Failed to initialize SSI port 0\n");
+    }
+  else
+    {
+      /* Bind the SSI port to the OLED */
+
+      dev = rit_initialize(spi, devno);
+      if (!dev)
+        {
+          glldbg("Failed to bind SSI port 0 to OLED %d: %d\n", devno);
+        }
+     else
+        {
+          gllvdbg("Bound SSI port 0 to OLED %d\n", devno);
+
+          /* And turn the OLED on (CONFIG_LCD_MAXPOWER should be 1) */
+
+          (void)dev->setpower(dev, CONFIG_LCD_MAXPOWER);
+          return dev;
+        }
+    }
+  return NULL;
+}
+
+/******************************************************************************
+ * Name:  rit_seldata
+ *
+ * Description:
+ *   Set or clear the SD1329 D/Cn bit to select data (true) or command
+ *   (false).  This function must be provided by platform-specific logic.
+ *
+ * Input Parameters:
+ *
+ *   devno - A value in the range of 0 throuh CONFIG_P14201_NINTERFACES-1.
+ *           This allows support for multiple OLED devices.
+ *   data - true: select data; false: select command
+ *
+ * Returned Value:
+ *   None
+ *
+ ******************************************************************************/
+
+void rit_seldata(unsigned int devno, bool data)
+{
+  /* Set GPIO to 1 for data, 0 for command */
+
+  lm3s_gpiowrite(OLEDDC_GPIO, data);
+}