Add LM3S6918 support

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1756 42af7a65-404d-4744-a932-0658087f49c3

1 files changed, 1 insertions, 46 deletions

diff --git a/nuttx/configs/mx1ads/README.txt b/nuttx/configs/mx1ads/README.txt
index aa1df0102..c3cb96527 100644
--- a/nuttx/configs/mx1ads/README.txt
+++ b/nuttx/configs/mx1ads/README.txt
@@ -110,7 +110,7 @@ ARM/i.MX1-specific Configuration Options
 Configurations
 ^^^^^^^^^^^^^^
 
-Each Neuros OSD configuration is maintained in a sudirectory and
+Each MX1ADS configuration is maintained in a sudirectory and
 can be selected as follow:
 
 	cd tools
@@ -125,48 +125,3 @@ ostest
 
 This configuration directory, performs a simple OS test using
 examples/ostest.
-Configuration Options
-^^^^^^^^^^^^^^^^^^^^^
-
-In additional to the common configuration options listed in the
-file configs/README.txt, there are other configuration options
-specific to the IMX:
-
- CONFIG_ARCH - identifies the arch subdirectory and, hence, the
-   processor architecture.
- CONFIG_ARCH_name - for use in C code.  This identifies the
-   particular chip or SoC that the architecture is implemented
-   in.
- CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
- CONFIG_ARCH_CHIP_name - For use in C code
- CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
-   the board that supports the particular chip or SoC.
- CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
- CONFIG_ARCH_BOARD_name - for use in C code
- CONFIG_BOARD_LOOPSPERMSEC - for delay loops
- CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to lpc2148.
- CONFIG_DRAM_SIZE - Describes the internal DRAM.
- CONFIG_DRAM_START - The start address of internal DRAM
- CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
-
-IMX specific device driver settings
-
- CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
-   console and ttys0 (default is the UART0).
- CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
-   This specific the size of the receive buffer
- CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
-   being sent.  This specific the size of the transmit buffer
- CONFIG_UARTn_BAUD - The configure BAUD of the UART.  Must be
- CONFIG_UARTn_BITS - The number of bits.  Must be either 7 or 8.
- CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
- CONFIG_UARTn_2STOP - Two stop bits
-
-IMX USB Configuration
-
- CONFIG_IMX_GIO_USBATTACH
-   GIO that detects USB attach/detach events
- CONFIG_IMX_GIO_USBDPPULLUP
-   GIO connected to D+.  Support software connect/disconnect.
- CONFIG_DMA320_USBDEV_DMA
-   Enable IMX-specific DMA support