Add beginning of m9s12x GPIO support

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3317 42af7a65-404d-4744-a932-0658087f49c3

3 files changed, 81 insertions, 71 deletions

diff --git a/nuttx/configs/ne64badge/README.txt b/nuttx/configs/ne64badge/README.txt
index 4cb74f5b6..3a7aac67b 100755
--- a/nuttx/configs/ne64badge/README.txt
+++ b/nuttx/configs/ne64badge/README.txt
@@ -110,6 +110,7 @@ PIN PIN NAME            BOARD SIGNAL   NOTES
  44 RESET               J3 RESET_L     Also to SW3
  57 BKGD/MODC/TAGHI_B   BDM BKGD CON6A
 
+ 85 PAD0                VR1            Potentiometer
  86 PAD1                J3 ANALOG_IN0  Not used on board
  87 PAD2                J3 ANALOG_IN1  " " "  " "" "   "
  88 PAD3                J3 ANALOG_IN2  " " "  " "" "   "
@@ -120,14 +121,8 @@ PIN PIN NAME            BOARD SIGNAL   NOTES
  73 PHY_RXP             J7 RD+         RJ45 connector
  74 PHY_RXN             J7 RD-         RJ45 connector
 
- 51 PL6/TXER/KWL6       N/C            N/C
- 52 PL5/TXDV/KWL5       N/C            N/C
- 58 PL4/COLLED          Collision LED  red
- 59 PL3/DUPLED          Full Duplex LED yellow
- 81 PL2/SPDLED          100Mbps Speed LED yellow
- 83 PL1/LNKLED          Link Good LED  green
- 84 PL0/ACTLED          Activity LED   yellow
-
+ Ports A,B,E,K managed by the MEBI block
+ ---------------------------------------
  60 PA0/ADDR8/DATA8     J3 ADDR_DATA8  Not used on board
  61 PA1/ADDR9/DATA9     J3 ADDR_DATA9  " " "  " "" "   "
  62 PA2/ADDR10/DATA10   J3 ADDR_DATA10 " " "  " "" "   "
@@ -146,15 +141,6 @@ PIN PIN NAME            BOARD SIGNAL   NOTES
  18 PB6/ADDR6/DATA6     J3 ADDR_DATA6  " " "  " "" "   "
  19 PB7/ADDR7/DATA7     J3 ADDR_DATA7  " " "  " "" "   "
 
- 97 PK0/XADR14          N/C            N/C
- 98 PK1/XADR15          N/C            N/C
- 99 PK2/XADR16          N/C            N/C
-100 PK3/XADR17          N/C            N/C
-103 PK4/XADR18          N/C            N/C
-104 PK5/XADR19          N/C            N/C
-105 PK6/XCS_B           J3 XCS         Not used on board
-106 PK7/ECS_B/ROMCTL    J3 ECS         " " "  " "" "   "
-
  56 PE0/XIRQ_B          BUTTON1        SW1
  55 PE1/IRQ_B           J3 IRQ         Not used on board
  54 PE2/R_W             J3 RW          " " "  " "" "   "
@@ -164,27 +150,22 @@ PIN PIN NAME            BOARD SIGNAL   NOTES
  39 PE6/IPIPE1/MODB     J3 MODB        " " "  " "" "   "
  38 PE7/NOACC/XCLKS_B   pulled low     pulled low
 
+ 97 PK0/XADR14          N/C            N/C
+ 98 PK1/XADR15          N/C            N/C
+ 99 PK2/XADR16          N/C            N/C
+100 PK3/XADR17          N/C            N/C
+103 PK4/XADR18          N/C            N/C
+104 PK5/XADR19          N/C            N/C
+105 PK6/XCS_B           J3 XCS         Not used on board
+106 PK7/ECS_B/ROMCTL    J3 ECS         " " "  " "" "   "
+
+ Ports T,S,G,H,J,L managed by the PIM Block
+ ------------------------------------------
 110 PT4/IOC1_4          J3 GPIO8       Not used on board
 109 PT5/IOC1_5          J3 GPIO9       " " "  " "" "   "
 108 PT6/IOC1_6          J3 GPIO10      " " "  " "" "   "
 107 PT7/IOC1_7          N/C            N/C
 
- 22 PG0/RXD0/KWG0       J3 GPIO0       Not used on board
- 23 PG1/RXD1/KWG1       J3 GPIO1       " " "  " "" "   "
- 24 PG2/RXD2/KWG2       J3 GPIO2       " " "  " "" "   "
- 25 PG3/RXD3/KWG3       J3 GPIO3       " " "  " "" "   "
- 26 PG4/RXCLK/KWG4      J3 GPIO4       " " "  " "" "   "
- 27 PG5/RXDV/KWG5       J3 GPIO5       " " "  " "" "   "
- 28 PG6/RXER/KWG6       J3 GPIO6       " " "  " "" "   "
- 29 PG7/KWG7            J3 GPIO7       " " "  " "" "   "
- 
-  8 PJ0/MDC/KWJ0        LED1           D21, red
-  9 PJ1/MDIO/KWJ1       LED2           D22, red
- 20 PJ2/CRS/KWJ2        J3 SPI_CS      Not used on board
- 21 PJ3/COL/KWJ3        N/C
-112 PJ6/SDA/KWJ6        J3 I2C_DATA    Not used on board
-111 PJ7/SCL/KWJ7        J3 I2C_CLOCK   " " "  " "" "   "
- 
  30 PS0/RXD0            RS232_RX       Eventually maps to J2 RXD
  31 PS1/TXD0            RS232_TX       Eventually maps to J2 TXD
  32 PS2/RXD1            J3&J4 UART_RX  Not used on board
@@ -194,6 +175,15 @@ PIN PIN NAME            BOARD SIGNAL   NOTES
  36 PS6/SCK             J3 SPI_CLOCK   " " "  " "" "   "
  37 PS7/SS_B            J3 SPI_SS      " " "  " "" "   "
  
+ 22 PG0/RXD0/KWG0       J3 GPIO0       Not used on board
+ 23 PG1/RXD1/KWG1       J3 GPIO1       " " "  " "" "   "
+ 24 PG2/RXD2/KWG2       J3 GPIO2       " " "  " "" "   "
+ 25 PG3/RXD3/KWG3       J3 GPIO3       " " "  " "" "   "
+ 26 PG4/RXCLK/KWG4      J3 GPIO4       " " "  " "" "   "
+ 27 PG5/RXDV/KWG5       J3 GPIO5       " " "  " "" "   "
+ 28 PG6/RXER/KWG6       J3 GPIO6       " " "  " "" "   "
+ 29 PG7/KWG7            J3 GPIO7       " " "  " "" "   "
+ 
   7 PH0/TXD0/KWH0       N/C            N/C
   6 PH1/TXD1/KWH1       N/C            N/C
   5 PH2/TXD2/KWH2       J4 XBEE_RESET  Not used on board
@@ -201,6 +191,21 @@ PIN PIN NAME            BOARD SIGNAL   NOTES
   3 PH4/TXCLK/KWH4      BUTTON2        SW2
   2 PH5/TXDV/KWH5       J5 XBEE_LOAD_H Not used on board
   1 PH6/TXER/KWH6       J4 XBEE_LOAD_L Not used on board
+ 
+  8 PJ0/MDC/KWJ0        LED1           D21, red
+  9 PJ1/MDIO/KWJ1       LED2           D22, red
+ 20 PJ2/CRS/KWJ2        J3 SPI_CS      Not used on board
+ 21 PJ3/COL/KWJ3        N/C
+112 PJ6/SDA/KWJ6        J3 I2C_DATA    Not used on board
+111 PJ7/SCL/KWJ7        J3 I2C_CLOCK   " " "  " "" "   "
+
+ 51 PL6/TXER/KWL6       N/C            N/C
+ 52 PL5/TXDV/KWL5       N/C            N/C
+ 58 PL4/COLLED          Collision LED  red
+ 59 PL3/DUPLED          Full Duplex LED yellow
+ 81 PL2/SPDLED          100Mbps Speed LED yellow
+ 83 PL1/LNKLED          Link Good LED  green
+ 84 PL0/ACTLED          Activity LED   yellow
 
 Development Environment
 ^^^^^^^^^^^^^^^^^^^^^^^
diff --git a/nuttx/configs/ne64badge/ostest/defconfig b/nuttx/configs/ne64badge/ostest/defconfig
index b45ff2b7f..a9af46bfb 100755
--- a/nuttx/configs/ne64badge/ostest/defconfig
+++ b/nuttx/configs/ne64badge/ostest/defconfig
@@ -105,13 +105,13 @@ CONFIG_ARCH_DMA=n
 #  contiguous address space in memory.
 #
 
-CONFIG_HCS12_SERIALMON=y
+CONFIG_HCS12_SERIALMON=n
 CONFIG_HCS12_NONBANKED=y
 
 #
 # CS12 Sub-system support
 #
-CONFIG_HCS12_SCI0=n
+CONFIG_HCS12_SCI0=y
 CONFIG_HCS12_SCI1=n
 
 #
@@ -128,10 +128,10 @@ CONFIG_HCS12_SCI1=n
 # CONFIG_SCIn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
 # CONFIG_SCIn_2STOP - Two stop bits
 #
-CONFIG_SCI0_SERIAL_CONSOLE=n
+CONFIG_SCI0_SERIAL_CONSOLE=y
 CONFIG_SCI0_TXBUFSIZE=32
 CONFIG_SCI0_RXBUFSIZE=32
-CONFIG_SCI0_BAUD=115200
+CONFIG_SCI0_BAUD=38400
 CONFIG_SCI0_BITS=8
 CONFIG_SCI0_PARITY=0
 CONFIG_SCI0_2STOP=0
@@ -139,7 +139,7 @@ CONFIG_SCI0_2STOP=0
 CONFIG_SCI1_SERIAL_CONSOLE=n
 CONFIG_SCI1_TXBUFSIZE=32
 CONFIG_SCI1_RXBUFSIZE=32
-CONFIG_SCI1_BAUD=115200
+CONFIG_SCI1_BAUD=38400
 CONFIG_SCI1_BITS=8
 CONFIG_SCI1_PARITY=0
 CONFIG_SCI1_2STOP=0
diff --git a/nuttx/configs/ne64badge/src/ne64badge_internal.h b/nuttx/configs/ne64badge/src/ne64badge_internal.h
index 452fc4c6d..c1ba3145b 100755
--- a/nuttx/configs/ne64badge/src/ne64badge_internal.h
+++ b/nuttx/configs/ne64badge/src/ne64badge_internal.h
@@ -54,6 +54,7 @@
  *  44 RESET               J3 RESET_L     Also to SW3

  *  57 BKGD/MODC/TAGHI_B   BDM BKGD CON6A

  * 

+ *  85 PAD0                VR1            Potentiometer

  *  86 PAD1                J3 ANALOG_IN0  Not used on board

  *  87 PAD2                J3 ANALOG_IN1  " " "  " "" "   "

  *  88 PAD3                J3 ANALOG_IN2  " " "  " "" "   "

@@ -64,14 +65,8 @@
  *  73 PHY_RXP             J7 RD+         RJ45 connector

  *  74 PHY_RXN             J7 RD-         RJ45 connector

  * 

- *  51 PL6/TXER/KWL6       N/C            N/C

- *  52 PL5/TXDV/KWL5       N/C            N/C

- *  58 PL4/COLLED          Collision LED  red

- *  59 PL3/DUPLED          Full Duplex LED yellow

- *  81 PL2/SPDLED          100Mbps Speed LED yellow

- *  83 PL1/LNKLED          Link Good LED  green

- *  84 PL0/ACTLED          Activity LED   yellow

- * 

+ * Ports A,B,E,K managed by the MEBI block

+ * ---------------------------------------

  *  60 PA0/ADDR8/DATA8     J3 ADDR_DATA8  Not used on board

  *  61 PA1/ADDR9/DATA9     J3 ADDR_DATA9  " " "  " "" "   "

  *  62 PA2/ADDR10/DATA10   J3 ADDR_DATA10 " " "  " "" "   "

@@ -90,15 +85,6 @@
  *  18 PB6/ADDR6/DATA6     J3 ADDR_DATA6  " " "  " "" "   "

  *  19 PB7/ADDR7/DATA7     J3 ADDR_DATA7  " " "  " "" "   "

  * 

- *  97 PK0/XADR14          N/C            N/C

- *  98 PK1/XADR15          N/C            N/C

- *  99 PK2/XADR16          N/C            N/C

- * 100 PK3/XADR17          N/C            N/C

- * 103 PK4/XADR18          N/C            N/C

- * 104 PK5/XADR19          N/C            N/C

- * 105 PK6/XCS_B           J3 XCS         Not used on board

- * 106 PK7/ECS_B/ROMCTL    J3 ECS         " " "  " "" "   "

- * 

  *  56 PE0/XIRQ_B          BUTTON1        SW1

  *  55 PE1/IRQ_B           J3 IRQ         Not used on board

  *  54 PE2/R_W             J3 RW          " " "  " "" "   "

@@ -108,27 +94,22 @@
  *  39 PE6/IPIPE1/MODB     J3 MODB        " " "  " "" "   "

  *  38 PE7/NOACC/XCLKS_B   pulled low     pulled low

  * 

+ *  97 PK0/XADR14          N/C            N/C

+ *  98 PK1/XADR15          N/C            N/C

+ *  99 PK2/XADR16          N/C            N/C

+ * 100 PK3/XADR17          N/C            N/C

+ * 103 PK4/XADR18          N/C            N/C

+ * 104 PK5/XADR19          N/C            N/C

+ * 105 PK6/XCS_B           J3 XCS         Not used on board

+ * 106 PK7/ECS_B/ROMCTL    J3 ECS         " " "  " "" "   "

+ * 

+ * Ports T,S,G,H,J,L managed by the PIM Block

+ * ------------------------------------------

  * 110 PT4/IOC1_4          J3 GPIO8       Not used on board

  * 109 PT5/IOC1_5          J3 GPIO9       " " "  " "" "   "

  * 108 PT6/IOC1_6          J3 GPIO10      " " "  " "" "   "

  * 107 PT7/IOC1_7          N/C            N/C

  * 

- *  22 PG0/RXD0/KWG0       J3 GPIO0       Not used on board

- *  23 PG1/RXD1/KWG1       J3 GPIO1       " " "  " "" "   "

- *  24 PG2/RXD2/KWG2       J3 GPIO2       " " "  " "" "   "

- *  25 PG3/RXD3/KWG3       J3 GPIO3       " " "  " "" "   "

- *  26 PG4/RXCLK/KWG4      J3 GPIO4       " " "  " "" "   "

- *  27 PG5/RXDV/KWG5       J3 GPIO5       " " "  " "" "   "

- *  28 PG6/RXER/KWG6       J3 GPIO6       " " "  " "" "   "

- *  29 PG7/KWG7            J3 GPIO7       " " "  " "" "   "

- * 

- *   8 PJ0/MDC/KWJ0        LED1           D21, red

- *   9 PJ1/MDIO/KWJ1       LED2           D22, red

- *  20 PJ2/CRS/KWJ2        J3 SPI_CS      Not used on board

- *  21 PJ3/COL/KWJ3        N/C

- * 112 PJ6/SDA/KWJ6        J3 I2C_DATA    Not used on board

- * 111 PJ7/SCL/KWJ7        J3 I2C_CLOCK   " " "  " "" "   "

- * 

  *  30 PS0/RXD0            RS232_RX       Eventually maps to J2 RXD

  *  31 PS1/TXD0            RS232_TX       Eventually maps to J2 TXD

  *  32 PS2/RXD1            J3&J4 UART_RX  Not used on board

@@ -138,6 +119,15 @@
  *  36 PS6/SCK             J3 SPI_CLOCK   " " "  " "" "   "

  *  37 PS7/SS_B            J3 SPI_SS      " " "  " "" "   "

  * 

+ *  22 PG0/RXD0/KWG0       J3 GPIO0       Not used on board

+ *  23 PG1/RXD1/KWG1       J3 GPIO1       " " "  " "" "   "

+ *  24 PG2/RXD2/KWG2       J3 GPIO2       " " "  " "" "   "

+ *  25 PG3/RXD3/KWG3       J3 GPIO3       " " "  " "" "   "

+ *  26 PG4/RXCLK/KWG4      J3 GPIO4       " " "  " "" "   "

+ *  27 PG5/RXDV/KWG5       J3 GPIO5       " " "  " "" "   "

+ *  28 PG6/RXER/KWG6       J3 GPIO6       " " "  " "" "   "

+ *  29 PG7/KWG7            J3 GPIO7       " " "  " "" "   "

+ * 

  *   7 PH0/TXD0/KWH0       N/C            N/C

  *   6 PH1/TXD1/KWH1       N/C            N/C

  *   5 PH2/TXD2/KWH2       J4 XBEE_RESET  Not used on board

@@ -145,6 +135,21 @@
  *   3 PH4/TXCLK/KWH4      BUTTON2        SW2

  *   2 PH5/TXDV/KWH5       J5 XBEE_LOAD_H Not used on board

  *   1 PH6/TXER/KWH6       J4 XBEE_LOAD_L Not used on board

+ * 

+ *   8 PJ0/MDC/KWJ0        LED1           D21, red

+ *   9 PJ1/MDIO/KWJ1       LED2           D22, red

+ *  20 PJ2/CRS/KWJ2        J3 SPI_CS      Not used on board

+ *  21 PJ3/COL/KWJ3        N/C

+ * 112 PJ6/SDA/KWJ6        J3 I2C_DATA    Not used on board

+ * 111 PJ7/SCL/KWJ7        J3 I2C_CLOCK   " " "  " "" "   "

+ * 

+ *  51 PL6/TXER/KWL6       N/C            N/C

+ *  52 PL5/TXDV/KWL5       N/C            N/C

+ *  58 PL4/COLLED          Collision LED  red

+ *  59 PL3/DUPLED          Full Duplex LED yellow

+ *  81 PL2/SPDLED          100Mbps Speed LED yellow

+ *  83 PL1/LNKLED          Link Good LED  green

+ *  84 PL0/ACTLED          Activity LED   yellow

  */

 

 /************************************************************************************