Clean-up and document LP17xx ethernet driver configuration settings

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3109 42af7a65-404d-4744-a932-0658087f49c3

5 files changed, 116 insertions, 0 deletions

diff --git a/nuttx/configs/nucleus2g/README.txt b/nuttx/configs/nucleus2g/README.txt
index 148b5e0c7..99aac4073 100755
--- a/nuttx/configs/nucleus2g/README.txt
+++ b/nuttx/configs/nucleus2g/README.txt
@@ -395,6 +395,26 @@ Nucleus 2G Configuration Options
 	CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity

 	CONFIG_UARTn_2STOP - Two stop bits

 

+  LPC17xx specific PHY/Ethernet device driver settings.  These setting

+  also require CONFIG_NET and CONFIG_LPC17_ETHERNET.

+

+	CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY

+	CONFIG_PHY_AUTONEG - Enable auto-negotion

+	CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.

+	CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex

+

+	CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18

+	CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18

+	CONFIG_NET_PRIORITY - Ethernet interrupt priority.  The is default is

+	  the higest priority.

+	CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).

+	CONFIG_NET_REGDEBUG - Enabled low level register debug.  Also needs

+	  CONFIG_DEBUG.

+	CONFIG_NET_BROADCAST - Enable receipt of broadcast frames

+	CONFIG_NET_HASH - Enable receipt of near-perfect match frames.

+	CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.

+      Automatically set if CONFIG_NET_IGMP is selected.

+

   LPC17xx USB Configuration

 

 	CONFIG_LPC17_USBDEV_FRAME_INTERRUPT

diff --git a/nuttx/configs/nucleus2g/nsh/defconfig b/nuttx/configs/nucleus2g/nsh/defconfig
index 6c529e56a..c2109fabf 100755
--- a/nuttx/configs/nucleus2g/nsh/defconfig
+++ b/nuttx/configs/nucleus2g/nsh/defconfig
@@ -182,6 +182,30 @@ CONFIG_UART2_2STOP=0
 CONFIG_UART3_2STOP=0
 
 #
+# LPC17xx specific PHY/Ethernet device driver settings
+#
+# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+# CONFIG_PHY_AUTONEG - Enable auto-negotion
+# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+# CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18
+# CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18
+# CONFIG_NET_PRIORITY - Ethernet interrupt priority.  The is default is
+#   the higest priority.
+# CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
+# CONFIG_NET_REGDEBUG - Enabled low level register debug.  Also needs
+#   CONFIG_DEBUG.
+# CONFIG_NET_BROADCAST - Enable receipt of broadcast frames
+# CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
+# CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.
+#   Automatically set if CONFIG_NET_IGMP is selected.
+#
+CONFIG_PHY_KS8721=y
+CONFIG_PHY_AUTONEG=y
+CONFIG_PHY_SPEED100=n
+CONFIG_PHY_FDUPLEX=y
+
+#
 # General build options
 #
 # CONFIG_RRLOAD_BINARY - make the rrload binary format used with
diff --git a/nuttx/configs/nucleus2g/ostest/defconfig b/nuttx/configs/nucleus2g/ostest/defconfig
index 0a0343134..6c9a59739 100755
--- a/nuttx/configs/nucleus2g/ostest/defconfig
+++ b/nuttx/configs/nucleus2g/ostest/defconfig
@@ -182,6 +182,30 @@ CONFIG_UART2_2STOP=0
 CONFIG_UART3_2STOP=0
 
 #
+# LPC17xx specific PHY/Ethernet device driver settings
+#
+# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+# CONFIG_PHY_AUTONEG - Enable auto-negotion
+# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+# CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18
+# CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18
+# CONFIG_NET_PRIORITY - Ethernet interrupt priority.  The is default is
+#   the higest priority.
+# CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
+# CONFIG_NET_REGDEBUG - Enabled low level register debug.  Also needs
+#   CONFIG_DEBUG.
+# CONFIG_NET_BROADCAST - Enable receipt of broadcast frames
+# CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
+# CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.
+#   Automatically set if CONFIG_NET_IGMP is selected.
+#
+CONFIG_PHY_KS8721=y
+CONFIG_PHY_AUTONEG=y
+CONFIG_PHY_SPEED100=n
+CONFIG_PHY_FDUPLEX=y
+
+#
 # General build options
 #
 # CONFIG_RRLOAD_BINARY - make the rrload binary format used with
diff --git a/nuttx/configs/nucleus2g/usbserial/defconfig b/nuttx/configs/nucleus2g/usbserial/defconfig
index b991857db..dc1cf0d2a 100755
--- a/nuttx/configs/nucleus2g/usbserial/defconfig
+++ b/nuttx/configs/nucleus2g/usbserial/defconfig
@@ -182,6 +182,30 @@ CONFIG_UART2_2STOP=0
 CONFIG_UART3_2STOP=0
 
 #
+# LPC17xx specific PHY/Ethernet device driver settings
+#
+# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+# CONFIG_PHY_AUTONEG - Enable auto-negotion
+# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+# CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18
+# CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18
+# CONFIG_NET_PRIORITY - Ethernet interrupt priority.  The is default is
+#   the higest priority.
+# CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
+# CONFIG_NET_REGDEBUG - Enabled low level register debug.  Also needs
+#   CONFIG_DEBUG.
+# CONFIG_NET_BROADCAST - Enable receipt of broadcast frames
+# CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
+# CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.
+#   Automatically set if CONFIG_NET_IGMP is selected.
+#
+CONFIG_PHY_KS8721=y
+CONFIG_PHY_AUTONEG=y
+CONFIG_PHY_SPEED100=n
+CONFIG_PHY_FDUPLEX=y
+
+#
 # General build options
 #
 # CONFIG_RRLOAD_BINARY - make the rrload binary format used with
diff --git a/nuttx/configs/nucleus2g/usbstorage/defconfig b/nuttx/configs/nucleus2g/usbstorage/defconfig
index ee883d403..b8e3c13f8 100755
--- a/nuttx/configs/nucleus2g/usbstorage/defconfig
+++ b/nuttx/configs/nucleus2g/usbstorage/defconfig
@@ -182,6 +182,30 @@ CONFIG_UART2_2STOP=0
 CONFIG_UART3_2STOP=0
 
 #
+# LPC17xx specific PHY/Ethernet device driver settings
+#
+# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+# CONFIG_PHY_AUTONEG - Enable auto-negotion
+# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+# CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18
+# CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18
+# CONFIG_NET_PRIORITY - Ethernet interrupt priority.  The is default is
+#   the higest priority.
+# CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
+# CONFIG_NET_REGDEBUG - Enabled low level register debug.  Also needs
+#   CONFIG_DEBUG.
+# CONFIG_NET_BROADCAST - Enable receipt of broadcast frames
+# CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
+# CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.
+#   Automatically set if CONFIG_NET_IGMP is selected.
+#
+CONFIG_PHY_KS8721=y
+CONFIG_PHY_AUTONEG=y
+CONFIG_PHY_SPEED100=n
+CONFIG_PHY_FDUPLEX=y
+
+#
 # General build options
 #
 # CONFIG_RRLOAD_BINARY - make the rrload binary format used with