Enable network and SD/MMC card support

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3145 42af7a65-404d-4744-a932-0658087f49c3

1 files changed, 27 insertions, 17 deletions

diff --git a/nuttx/configs/olimex-lpc1766stk/nsh/defconfig b/nuttx/configs/olimex-lpc1766stk/nsh/defconfig
index d8dcf573a..260d10e08 100755
--- a/nuttx/configs/olimex-lpc1766stk/nsh/defconfig
+++ b/nuttx/configs/olimex-lpc1766stk/nsh/defconfig
@@ -52,7 +52,7 @@
 # CONFIG_DRAM_SIZE - Describes the installed DRAM.
 # CONFIG_DRAM_START - The start address of DRAM (physical)
 # CONFIG_DRAM_END - Last address+1 of installed RAM
-# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
+# CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization
 # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
 #   stack. If defined, this symbol is the size of the interrupt
 #   stack in bytes.  If not defined, the user task stacks will be
@@ -102,7 +102,8 @@ CONFIG_LPC17_BUILDROOT=y
 #
 # Individual subsystems can be enabled:
 # (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
-CONFIG_LPC17_ETHERNET=n
+#
+CONFIG_LPC17_ETHERNET=y
 CONFIG_LPC17_USBHOST=n
 CONFIG_LPC17_USBOTG=n
 CONFIG_LPC17_USBDEV=n
@@ -113,8 +114,8 @@ CONFIG_LPC17_UART3=n
 CONFIG_LPC17_CAN1=n
 CONFIG_LPC17_CAN2=n
 CONFIG_LPC17_SPI=n
-CONFIG_LPC17_SSP0=y
-CONFIG_LPC17_SSP1=n
+CONFIG_LPC17_SSP0=n
+CONFIG_LPC17_SSP1=y
 CONFIG_LPC17_I2C0=n
 CONFIG_LPC17_I2C1=n
 CONFIG_LPC17_I2S=n
@@ -194,6 +195,8 @@ CONFIG_UART3_2STOP=0
 # CONFIG_NET_PRIORITY - Ethernet interrupt priority.  The is default is
 #   the higest priority.
 # CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
+# CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets.
+#   Also needs CONFIG_DEBUG.
 # CONFIG_NET_REGDEBUG - Enabled low level register debug.  Also needs
 #   CONFIG_DEBUG.
 # CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
@@ -204,6 +207,10 @@ CONFIG_PHY_KS8721=y
 CONFIG_PHY_AUTONEG=y
 CONFIG_PHY_SPEED100=n
 CONFIG_PHY_FDUPLEX=y
+CONFIG_NET_EMACRAM_SIZE=8192
+CONFIG_NET_NTXDESC=7
+CONFIG_NET_NRXDESC=7
+CONFIG_NET_REGDEBUG=n
 
 #
 # General build options
@@ -456,6 +463,7 @@ CONFIG_PREALLOC_TIMERS=4
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+#
 CONFIG_FS_FAT=y
 CONFIG_FS_ROMFS=n
 
@@ -525,19 +533,21 @@ CONFIG_MMCSD_HAVECARDDETECT=n
 # CONFIG_NET_LLH_LEN - The link level header length
 # CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
 #
-CONFIG_NET=n
+CONFIG_NET=y
 CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NSOCKET_DESCRIPTORS=8
 CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=n
-CONFIG_NET_TCP_CONNS=40
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=n
+CONFIG_NET_BUFSIZE=562
+CONFIG_NET_TCP=y
+CONFIG_NET_TCP_CONNS=8
+CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
+CONFIG_NET_TCPBACKLOG=n
+CONFIG_NET_MAX_LISTENPORTS=8
+CONFIG_NET_UDP=y
 CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=n
-CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_UDP_CONNS=8
+CONFIG_NET_ICMP=y
+CONFIG_NET_ICMP_PING=y
 #CONFIG_NET_PINGADDRCONF=0
 CONFIG_NET_STATISTICS=y
 #CONFIG_NET_RECEIVE_WINDOW=
@@ -700,6 +710,7 @@ CONFIG_EXAMPLE_UIP_DHCPC=n
 # CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask
 # CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the
 #   client side of the test (may be target or host)
+#
 CONFIG_EXAMPLE_NETTEST_SERVER=n
 CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
 CONFIG_EXAMPLE_NETTEST_NOMAC=y
@@ -709,7 +720,6 @@ CONFIG_EXAMPLE_NETTEST_NETMASK=(255L<<24|255L<<16|255L<<8|0L)
 CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10L<<24|0L<<16|0L<<8|1L)
 
 #
-#
 # Settings for examples/ostest
 #
 CONFIG_EXAMPLES_OSTEST_LOOPS=1
@@ -763,7 +773,7 @@ CONFIG_EXAMPLES_NSH_TELNET=n
 CONFIG_EXAMPLES_NSH_ARCHINIT=y
 CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
 CONFIG_EXAMPLES_NSH_DHCPC=n
-CONFIG_EXAMPLES_NSH_NOMAC=n
+CONFIG_EXAMPLES_NSH_NOMAC=y
 CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
 CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
 CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
@@ -779,7 +789,7 @@ CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
 #
 # Architecture-specific NSH options
 #
-CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=0
+CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=1
 CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
 CONFIG_EXAMPLES_NSH_MMCSDMINOR=0