Add SAM3U board-specific SPI support

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4011 42af7a65-404d-4744-a932-0658087f49c3

1 files changed, 246 insertions, 246 deletions

diff --git a/nuttx/configs/sam3u-ek/src/sam3uek_internal.h b/nuttx/configs/sam3u-ek/src/sam3uek_internal.h
index 1e79a86f1..2bc6d397d 100755..100644
--- a/nuttx/configs/sam3u-ek/src/sam3uek_internal.h
+++ b/nuttx/configs/sam3u-ek/src/sam3uek_internal.h
@@ -1,246 +1,246 @@
-/************************************************************************************

- * configs/sam3uek_eval/src/sam3uek_internal.h

- * arch/arm/src/board/sam3uek_internal.n

- *

- *   Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.

- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>

- *

- * Redistribution and use in source and binary forms, with or without

- * modification, are permitted provided that the following conditions

- * are met:

- *

- * 1. Redistributions of source code must retain the above copyright

- *    notice, this list of conditions and the following disclaimer.

- * 2. Redistributions in binary form must reproduce the above copyright

- *    notice, this list of conditions and the following disclaimer in

- *    the documentation and/or other materials provided with the

- *    distribution.

- * 3. Neither the name NuttX nor the names of its contributors may be

- *    used to endorse or promote products derived from this software

- *    without specific prior written permission.

- *

- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

- * POSSIBILITY OF SUCH DAMAGE.

- *

- ************************************************************************************/

-

-#ifndef __CONFIGS_SAM3U_EK_SRC_SAM3UEK_INTERNAL_H

-#define __CONFIGS_SAM3U_EK_SRC_SAM3UEK_INTERNAL_H

-

-/************************************************************************************

- * Included Files

- ************************************************************************************/

-

-#include <nuttx/config.h>

-#include <nuttx/compiler.h>

-

-#include <stdint.h>

-

-#include <nuttx/irq.h>

-

-/************************************************************************************

- * Definitions

- ************************************************************************************/

-

-/* External Memory Usage ************************************************************/

-/* LCD on CS2 */

-

-#define LCD_BASE     SAM3U_EXTCS2_BASE

-

-/* Touchscreen controller (TSC) */

-

-#define CONFIG_TSC_ADS7843    1   /* ADS7843 present on board */

-#define CONFIG_TSC_SPI        0   /* On SPI0 */

-

-/* SAM3U-EK GPIO Pin Definitions ****************************************************/

-

-/* LCD:

- *   LCD Module Pin Out:                         AT91SAM3U PIO:

- *  -------------------------------------------- --------------------------------------

- *   Pin Symbol Function                         LCD            PeriphA  PeriphB Extra

- *  ---- ------ -------------------------------- -------------- -------- ------- ------

- *   1   GND    Ground                           N/A            ---      ---     ---

- *   2   CS     Chip Select                      PC16           NCS2     PWML3   AD12BAD5

- *   3   RS     Register select signal           PB8 (see A1)   CTS0     A1      AD3

- *   4   WR     Write operation signal           PB23 (NWE)     NWR0/NEW PCK1    ---

- *   5   RD     Read operation signal            PB19 (NRD)     NRD      PWML2   ---

- *   6   DB0    Data bus                         PB9            D0       DTR0    ---

- *   7   DB1    Data bus                         PB10           D1       DSR0    ---

- *   8   DB2    Data bus                         PB11           D2       DCD0    ---

- *   9   DB3    Data bus                         PB12           D3       RI0     ---

- *   10  DB4    Data bus                         PB13           D4       PWMH0   ---

- *   11  DB5    Data bus                         PB14           D5       PWMH1   ---

- *   12  DB6    Data bus                         PB15           D6       PWMH2   ---

- *   13  DB7    Data bus                         PB16           D7       PMWH3   ---

- *   14  DB8    Data bus                         PB25           D8       PWML0   ---

- *   15  DB9    Data bus                         PB26           D9       PWML1   ---

- *   16  DB10   Data bus                         PB27           D10      PWML2   ---

- *   17  DB11   Data bus                         PB28           D11      PWML3   ---

- *   18  DB12   Data bus                         PB29           D12      ---     ---

- *   19  DB13   Data bus                         PB30           D13      ---     ---

- *   20  DB14   Data bus                         PB31           D14      ---     ---

- *   21  DB15   Data bus                         PB6            TIOA1    D15     AD1

- *   22  NC     No connection                    N/A            ---      ---     ---

- *   23  NC     No connection                    N/A            ---      ---     ---

- *   24  RESET  Reset signal                     N/A            ---      ---     ---

- *   25  GND    Ground                           N/A            ---      ---     ---

- *   26  X+     Touch panel X_RIGHT              PA15           SPCK     PWMH2   ---

- *   27  Y+     Touch panel Y_UP                 PA14           MOSI     ---     ---

- *   28  X-     Touch panel X_LEFT               PA13           MISO     ---     ---

- *   29  Y-     Touch panel Y_DOWN               PC14           A3       NPCS2   ---

- *   30  GND    Ground                           N/A            ---      ---     ---

- *   31  VDD1   Power supply for digital IO Pad  N/A            ---      ---     ---

- *   32  VDD2   Power supply for analog circuit  N/A            ---      ---     ---

- *   33  A1     Power supply for backlight       PB8 (see RS)   CTS0     A1      AD3

- *   34  A2     Power supply for backlight       N/A            ---      ---     ---

- *   35  A3     Power supply for backlight       N/A            ---      ---     ---

- *   36  A4     Power supply for backlight       N/A            ---      ---     ---

- *   37  NC     No connection                    N/A            ---      ---     ---

- *   38  NC     No connection                    N/A            ---      ---     ---

- *   39  K      Backlight ground                 N/A            ---      ---     ---

- */

-

-#define GPIO_LCD_NCS2 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|GPIO_PIN16)

-#define GPIO_LCD_RS   (GPIO_PERIPHB|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN8)

-#define GPIO_LCD_NWE  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN23)

-#define GPIO_LCD_NRD  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN19)

-

-#define GPIO_LCD_D0   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN9)

-#define GPIO_LCD_D1   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN10)

-#define GPIO_LCD_D2   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN11)

-#define GPIO_LCD_D3   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN12)

-#define GPIO_LCD_D4   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN13)

-#define GPIO_LCD_D5   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN14)

-#define GPIO_LCD_D6   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN15)

-#define GPIO_LCD_D7   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN16)

-#define GPIO_LCD_D8   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN25)

-#define GPIO_LCD_D9   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN26)

-#define GPIO_LCD_D10  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN27)

-#define GPIO_LCD_D11  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN28)

-#define GPIO_LCD_D12  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN29)

-#define GPIO_LCD_D13  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN30)

-#define GPIO_LCD_D14  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN31)

-#define GPIO_LCD_D15  (GPIO_PERIPHB|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN6)

-

-/* LCD Backlight pin definition. */

-

-#define GPIO_LCD_BKL  (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_OUTPUT_CLEAR|GPIO_PORT_PIOC|GPIO_PIN19)

-

-/* Touchscreen controller (TSC) */

-

-#define GPIO_TCS_IRQ  (PIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN6)

-#define GPIO_TCS_BUSY (PIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN6)

-

-/* LEDs */

-

-#define GPIO_LED0     (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_OUTPUT_CLEAR|GPIO_PIN0)

-#define GPIO_LED1     (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_OUTPUT_SET|GPIO_PIN1)

-#define GPIO_LED2     (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_OUTPUT_SET|GPIO_PIN2)

-

-/* BUTTONS */

-

-#define GPIO_BUTTON1  (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_CFG_DEGLITCH|GPIO_PORT_PIOA|GPIO_PIN18)

-#define GPIO_BUTTON2  (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_CFG_DEGLITCH|GPIO_PORT_PIOA|GPIO_PIN19)

-

-#define IRQ_BUTTON1   SAM3U_IRQ_PA18

-#define IRQ_BUTTON2   SAM3U_IRQ_PA19

-

-/* SD Card Detect */

-

-#define GPIO_MCI_CD   (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN25)

-

-/* SPI Chip Selects */

-

-/* Chip select pin connected to the touchscreen controller. */

-

-#define GPIO_TSC_NPCS  GPIO_SPI0_NPCS2_PC14

-

-/************************************************************************************

- * Public Types

- ************************************************************************************/

-

-/************************************************************************************

- * Public data

- ************************************************************************************/

-

-#ifndef __ASSEMBLY__

-

-/************************************************************************************

- * Public Functions

- ************************************************************************************/

-

-/************************************************************************************

- * Name: sam3u_spiinitialize

- *

- * Description:

- *   Called to configure SPI chip select GPIO pins for the SAM3U-EK board.

- *

- ************************************************************************************/

-

-extern void weak_function sam3u_spiinitialize(void);

-

-/************************************************************************************

- * Name: sam3u_usbinitialize

- *

- * Description:

- *   Called to setup USB-related GPIO pins for the SAM3U-EK board.

- *

- ************************************************************************************/

-

-extern void weak_function sam3u_usbinitialize(void);

-

-/****************************************************************************

- * Name: sam3u_hsmciinit

- *

- * Description:

- *   Initialize HSMCI support 

- *

- ****************************************************************************/

-

-#ifdef CONFIG_SAM3U_HSMCI

-extern int weak_function sam3u_hsmciinit(void);

-#else

-# define sam3u_hsmciinit()

-#endif

-

-/****************************************************************************

- * Name: sam3u_cardinserted

- *

- * Description:

- *   Check if a card is inserted into the selected HSMCI slot

- *

- ****************************************************************************/

-

-#ifdef CONFIG_SAM3U_HSMCI

-extern bool sam3u_cardinserted(unsigned char slot);

-#else

-#  define sam3u_cardinserted(slot) (false)

-#endif

-

-/****************************************************************************

- * Name: sam3u_writeprotected

- *

- * Description:

- *   Check if a card is inserted into the selected HSMCI slot

- *

- ****************************************************************************/

-

-#ifdef CONFIG_SAM3U_HSMCI

-extern bool sam3u_writeprotected(unsigned char slot);

-#else

-#  define sam3u_writeprotected(slot) (false)

-#endif

-

-#endif /* __ASSEMBLY__ */

-#endif /* __CONFIGS_SAM3U_EK_SRC_SAM3UEK_INTERNAL_H */

-

+/************************************************************************************
+ * configs/sam3uek_eval/src/sam3uek_internal.h
+ * arch/arm/src/board/sam3uek_internal.n
+ *
+ *   Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __CONFIGS_SAM3U_EK_SRC_SAM3UEK_INTERNAL_H
+#define __CONFIGS_SAM3U_EK_SRC_SAM3UEK_INTERNAL_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/compiler.h>
+
+#include <stdint.h>
+
+#include <nuttx/irq.h>
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* External Memory Usage ************************************************************/
+/* LCD on CS2 */
+
+#define LCD_BASE     SAM3U_EXTCS2_BASE
+
+/* Touchscreen controller (TSC) */
+
+#define CONFIG_TSC_ADS7843    1   /* ADS7843 present on board */
+#define CONFIG_TSC_SPI        0   /* On SPI0 */
+
+/* SAM3U-EK GPIO Pin Definitions ****************************************************/
+
+/* LCD:
+ *   LCD Module Pin Out:                         AT91SAM3U PIO:
+ *  -------------------------------------------- --------------------------------------
+ *   Pin Symbol Function                         LCD            PeriphA  PeriphB Extra
+ *  ---- ------ -------------------------------- -------------- -------- ------- ------
+ *   1   GND    Ground                           N/A            ---      ---     ---
+ *   2   CS     Chip Select                      PC16           NCS2     PWML3   AD12BAD5
+ *   3   RS     Register select signal           PB8 (see A1)   CTS0     A1      AD3
+ *   4   WR     Write operation signal           PB23 (NWE)     NWR0/NEW PCK1    ---
+ *   5   RD     Read operation signal            PB19 (NRD)     NRD      PWML2   ---
+ *   6   DB0    Data bus                         PB9            D0       DTR0    ---
+ *   7   DB1    Data bus                         PB10           D1       DSR0    ---
+ *   8   DB2    Data bus                         PB11           D2       DCD0    ---
+ *   9   DB3    Data bus                         PB12           D3       RI0     ---
+ *   10  DB4    Data bus                         PB13           D4       PWMH0   ---
+ *   11  DB5    Data bus                         PB14           D5       PWMH1   ---
+ *   12  DB6    Data bus                         PB15           D6       PWMH2   ---
+ *   13  DB7    Data bus                         PB16           D7       PMWH3   ---
+ *   14  DB8    Data bus                         PB25           D8       PWML0   ---
+ *   15  DB9    Data bus                         PB26           D9       PWML1   ---
+ *   16  DB10   Data bus                         PB27           D10      PWML2   ---
+ *   17  DB11   Data bus                         PB28           D11      PWML3   ---
+ *   18  DB12   Data bus                         PB29           D12      ---     ---
+ *   19  DB13   Data bus                         PB30           D13      ---     ---
+ *   20  DB14   Data bus                         PB31           D14      ---     ---
+ *   21  DB15   Data bus                         PB6            TIOA1    D15     AD1
+ *   22  NC     No connection                    N/A            ---      ---     ---
+ *   23  NC     No connection                    N/A            ---      ---     ---
+ *   24  RESET  Reset signal                     N/A            ---      ---     ---
+ *   25  GND    Ground                           N/A            ---      ---     ---
+ *   26  X+     Touch panel X_RIGHT              PA15           SPCK     PWMH2   ---
+ *   27  Y+     Touch panel Y_UP                 PA14           MOSI     ---     ---
+ *   28  X-     Touch panel X_LEFT               PA13           MISO     ---     ---
+ *   29  Y-     Touch panel Y_DOWN               PC14           A3       NPCS2   ---
+ *   30  GND    Ground                           N/A            ---      ---     ---
+ *   31  VDD1   Power supply for digital IO Pad  N/A            ---      ---     ---
+ *   32  VDD2   Power supply for analog circuit  N/A            ---      ---     ---
+ *   33  A1     Power supply for backlight       PB8 (see RS)   CTS0     A1      AD3
+ *   34  A2     Power supply for backlight       N/A            ---      ---     ---
+ *   35  A3     Power supply for backlight       N/A            ---      ---     ---
+ *   36  A4     Power supply for backlight       N/A            ---      ---     ---
+ *   37  NC     No connection                    N/A            ---      ---     ---
+ *   38  NC     No connection                    N/A            ---      ---     ---
+ *   39  K      Backlight ground                 N/A            ---      ---     ---
+ */
+
+#define GPIO_LCD_NCS2 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|GPIO_PIN16)
+#define GPIO_LCD_RS   (GPIO_PERIPHB|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN8)
+#define GPIO_LCD_NWE  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN23)
+#define GPIO_LCD_NRD  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN19)
+
+#define GPIO_LCD_D0   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN9)
+#define GPIO_LCD_D1   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN10)
+#define GPIO_LCD_D2   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN11)
+#define GPIO_LCD_D3   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN12)
+#define GPIO_LCD_D4   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN13)
+#define GPIO_LCD_D5   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN14)
+#define GPIO_LCD_D6   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN15)
+#define GPIO_LCD_D7   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN16)
+#define GPIO_LCD_D8   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN25)
+#define GPIO_LCD_D9   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN26)
+#define GPIO_LCD_D10  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN27)
+#define GPIO_LCD_D11  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN28)
+#define GPIO_LCD_D12  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN29)
+#define GPIO_LCD_D13  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN30)
+#define GPIO_LCD_D14  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN31)
+#define GPIO_LCD_D15  (GPIO_PERIPHB|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN6)
+
+/* LCD Backlight pin definition. */
+
+#define GPIO_LCD_BKL  (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_OUTPUT_CLEAR|GPIO_PORT_PIOC|GPIO_PIN19)
+
+/* Touchscreen controller (TSC) */
+
+#define GPIO_TCS_IRQ  (PIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN6)
+#define GPIO_TCS_BUSY (PIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN6)
+
+/* LEDs */
+
+#define GPIO_LED0     (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_OUTPUT_CLEAR|GPIO_PIN0)
+#define GPIO_LED1     (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_OUTPUT_SET|GPIO_PIN1)
+#define GPIO_LED2     (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_OUTPUT_SET|GPIO_PIN2)
+
+/* BUTTONS */
+
+#define GPIO_BUTTON1  (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_CFG_DEGLITCH|GPIO_PORT_PIOA|GPIO_PIN18)
+#define GPIO_BUTTON2  (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_CFG_DEGLITCH|GPIO_PORT_PIOA|GPIO_PIN19)
+
+#define IRQ_BUTTON1   SAM3U_IRQ_PA18
+#define IRQ_BUTTON2   SAM3U_IRQ_PA19
+
+/* SD Card Detect */
+
+#define GPIO_MCI_CD   (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN25)
+
+/* SPI Chip Selects */
+
+/* Chip select pin connected to the touchscreen controller and to ZigBee module connector. */
+
+#define GPIO_TSC_NPCS2  GPIO_SPI0_NPCS2_3
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: sam3u_spiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the SAM3U-EK board.
+ *
+ ************************************************************************************/
+
+extern void weak_function sam3u_spiinitialize(void);
+
+/************************************************************************************
+ * Name: sam3u_usbinitialize
+ *
+ * Description:
+ *   Called to setup USB-related GPIO pins for the SAM3U-EK board.
+ *
+ ************************************************************************************/
+
+extern void weak_function sam3u_usbinitialize(void);
+
+/****************************************************************************
+ * Name: sam3u_hsmciinit
+ *
+ * Description:
+ *   Initialize HSMCI support 
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_SAM3U_HSMCI
+extern int weak_function sam3u_hsmciinit(void);
+#else
+# define sam3u_hsmciinit()
+#endif
+
+/****************************************************************************
+ * Name: sam3u_cardinserted
+ *
+ * Description:
+ *   Check if a card is inserted into the selected HSMCI slot
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_SAM3U_HSMCI
+extern bool sam3u_cardinserted(unsigned char slot);
+#else
+#  define sam3u_cardinserted(slot) (false)
+#endif
+
+/****************************************************************************
+ * Name: sam3u_writeprotected
+ *
+ * Description:
+ *   Check if a card is inserted into the selected HSMCI slot
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_SAM3U_HSMCI
+extern bool sam3u_writeprotected(unsigned char slot);
+#else
+#  define sam3u_writeprotected(slot) (false)
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __CONFIGS_SAM3U_EK_SRC_SAM3UEK_INTERNAL_H */
+