Eliminated sam3u_internal.h. Use separate header files instead. More renaming from sam3u_ to sam_ to make room in the namespce for the sam4l_

1 files changed, 0 insertions, 257 deletions

diff --git a/nuttx/configs/sam3u-ek/src/sam3uek_internal.h b/nuttx/configs/sam3u-ek/src/sam3uek_internal.h
deleted file mode 100644
index d81fbd7cc..000000000
--- a/nuttx/configs/sam3u-ek/src/sam3uek_internal.h
+++ /dev/null
@@ -1,257 +0,0 @@
-/************************************************************************************
- * configs/sam3uek_eval/src/sam3uek_internal.h
- * arch/arm/src/board/sam3uek_internal.n
- *
- *   Copyright (C) 2009-2011, 2013 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-
-#ifndef __CONFIGS_SAM3U_EK_SRC_SAM3UEK_INTERNAL_H
-#define __CONFIGS_SAM3U_EK_SRC_SAM3UEK_INTERNAL_H
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <nuttx/config.h>
-#include <nuttx/compiler.h>
-
-#include <stdint.h>
-
-#include <arch/irq.h>
-#include <nuttx/irq.h>
-
-/************************************************************************************
- * Definitions
- ************************************************************************************/
-
-/* External Memory Usage ************************************************************/
-/* LCD on CS2 */
-
-#define LCD_BASE              SAM_EXTCS2_BASE
-
-/* Touchscreen controller (TSC) */
-
-#define CONFIG_TSC_ADS7843    1   /* ADS7843 present on board */
-#define CONFIG_TSC_SPI        0   /* On SPI0 */
-
-/* SAM3U-EK GPIO Pin Definitions ****************************************************/
-
-/* LCD:
- *   LCD Module Pin Out:                         AT91SAM3U PIO:
- *  -------------------------------------------- --------------------------------------
- *   Pin Symbol Function                         LCD            PeriphA  PeriphB Extra
- *  ---- ------ -------------------------------- -------------- -------- ------- ------
- *   1   GND    Ground                           N/A            ---      ---     ---
- *   2   CS     Chip Select                      PC16           NCS2     PWML3   AD12BAD5
- *   3   RS     Register select signal           PB8 (see A1)   CTS0     A1      AD3
- *   4   WR     Write operation signal           PB23 (NWE)     NWR0/NEW PCK1    ---
- *   5   RD     Read operation signal            PB19 (NRD)     NRD      PWML2   ---
- *   6   DB0    Data bus                         PB9            D0       DTR0    ---
- *   7   DB1    Data bus                         PB10           D1       DSR0    ---
- *   8   DB2    Data bus                         PB11           D2       DCD0    ---
- *   9   DB3    Data bus                         PB12           D3       RI0     ---
- *   10  DB4    Data bus                         PB13           D4       PWMH0   ---
- *   11  DB5    Data bus                         PB14           D5       PWMH1   ---
- *   12  DB6    Data bus                         PB15           D6       PWMH2   ---
- *   13  DB7    Data bus                         PB16           D7       PMWH3   ---
- *   14  DB8    Data bus                         PB25           D8       PWML0   ---
- *   15  DB9    Data bus                         PB26           D9       PWML1   ---
- *   16  DB10   Data bus                         PB27           D10      PWML2   ---
- *   17  DB11   Data bus                         PB28           D11      PWML3   ---
- *   18  DB12   Data bus                         PB29           D12      ---     ---
- *   19  DB13   Data bus                         PB30           D13      ---     ---
- *   20  DB14   Data bus                         PB31           D14      ---     ---
- *   21  DB15   Data bus                         PB6            TIOA1    D15     AD1
- *   22  NC     No connection                    N/A            ---      ---     ---
- *   23  NC     No connection                    N/A            ---      ---     ---
- *   24  RESET  Reset signal                     N/A            ---      ---     ---
- *   25  GND    Ground                           N/A            ---      ---     ---
- *   26  X+     Touch panel X_RIGHT              PA15           SPCK     PWMH2   ---
- *   27  Y+     Touch panel Y_UP                 PA14           MOSI     ---     ---
- *   28  X-     Touch panel X_LEFT               PA13           MISO     ---     ---
- *   29  Y-     Touch panel Y_DOWN               PC14           A3       NPCS2   ---
- *   30  GND    Ground                           N/A            ---      ---     ---
- *   31  VDD1   Power supply for digital IO Pad  N/A            ---      ---     ---
- *   32  VDD2   Power supply for analog circuit  N/A            ---      ---     ---
- *   33  A1     Power supply for backlight       PB8 (see RS)   CTS0     A1      AD3
- *   34  A2     Power supply for backlight       N/A            ---      ---     ---
- *   35  A3     Power supply for backlight       N/A            ---      ---     ---
- *   36  A4     Power supply for backlight       N/A            ---      ---     ---
- *   37  NC     No connection                    N/A            ---      ---     ---
- *   38  NC     No connection                    N/A            ---      ---     ---
- *   39  K      Backlight ground                 N/A            ---      ---     ---
- */
-
-#define GPIO_LCD_NCS2 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|GPIO_PIN16)
-#define GPIO_LCD_RS   (GPIO_PERIPHB|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN8)
-#define GPIO_LCD_NWE  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN23)
-#define GPIO_LCD_NRD  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN19)
-
-#define GPIO_LCD_D0   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN9)
-#define GPIO_LCD_D1   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN10)
-#define GPIO_LCD_D2   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN11)
-#define GPIO_LCD_D3   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN12)
-#define GPIO_LCD_D4   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN13)
-#define GPIO_LCD_D5   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN14)
-#define GPIO_LCD_D6   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN15)
-#define GPIO_LCD_D7   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN16)
-#define GPIO_LCD_D8   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN25)
-#define GPIO_LCD_D9   (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN26)
-#define GPIO_LCD_D10  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN27)
-#define GPIO_LCD_D11  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN28)
-#define GPIO_LCD_D12  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN29)
-#define GPIO_LCD_D13  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN30)
-#define GPIO_LCD_D14  (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN31)
-#define GPIO_LCD_D15  (GPIO_PERIPHB|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN6)
-
-/* LCD Backlight pin definition. */
-
-#define GPIO_LCD_BKL  (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_OUTPUT_CLEAR|GPIO_PORT_PIOC|GPIO_PIN19)
-
-/* Touchscreen controller (TSC) */
-
-#define GPIO_TCS_IRQ  (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN24)
-#define GPIO_TCS_BUSY (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN2)
-
-#define SAM_TCS_IRQ   SAM_IRQ_PA24
-
-/* LEDs */
-
-#define GPIO_LED0     (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_OUTPUT_CLEAR|GPIO_PIN0)
-#define GPIO_LED1     (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_OUTPUT_SET|GPIO_PIN1)
-#define GPIO_LED2     (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_OUTPUT_SET|GPIO_PIN2)
-
-/* BUTTONS */
-
-#define GPIO_BUTTON1  (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_CFG_DEGLITCH|GPIO_PORT_PIOA|GPIO_PIN18)
-#define GPIO_BUTTON2  (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_CFG_DEGLITCH|GPIO_PORT_PIOA|GPIO_PIN19)
-
-#define IRQ_BUTTON1   SAM_IRQ_PA18
-#define IRQ_BUTTON2   SAM_IRQ_PA19
-
-/* SD Card Detect */
-
-#define GPIO_MCI_CD   (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN25)
-
-/* SPI Chip Selects */
-
-/* Chip select pin connected to the touchscreen controller and to the ZigBee module
- * connector.  Notice that the touchscreen chip select is implemented as a GPIO
- * OUTPUT that must be controlled by board-specific.  This is because the ADS7843E
- * driver must be able to sample the device BUSY GPIO input between SPI transfers.
- * However, the AD7843E will tri-state the BUSY input whenever the chip select is
- * de-asserted.  So the only option is to control the chip select manually and hold
- * it low throughout the SPI transfer.
- */
-
-#define GPIO_TSC_NPCS2 (GPIO_OUTPUT|GPIO_CFG_PULLUP|GPIO_OUTPUT_SET|\
-                        GPIO_PORT_PIOC|GPIO_PIN14)
-
-/************************************************************************************
- * Public Types
- ************************************************************************************/
-
-/************************************************************************************
- * Public data
- ************************************************************************************/
-
-#ifndef __ASSEMBLY__
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Name: sam3u_spiinitialize
- *
- * Description:
- *   Called to configure SPI chip select GPIO pins for the SAM3U-EK board.
- *
- ************************************************************************************/
-
-extern void weak_function sam3u_spiinitialize(void);
-
-/************************************************************************************
- * Name: sam3u_usbinitialize
- *
- * Description:
- *   Called to setup USB-related GPIO pins for the SAM3U-EK board.
- *
- ************************************************************************************/
-
-extern void weak_function sam3u_usbinitialize(void);
-
-/****************************************************************************
- * Name: sam3u_hsmciinit
- *
- * Description:
- *   Initialize HSMCI support
- *
- ****************************************************************************/
-
-#ifdef CONFIG_SAM34_HSMCI
-extern int weak_function sam3u_hsmciinit(void);
-#else
-# define sam3u_hsmciinit()
-#endif
-
-/****************************************************************************
- * Name: sam3u_cardinserted
- *
- * Description:
- *   Check if a card is inserted into the selected HSMCI slot
- *
- ****************************************************************************/
-
-#ifdef CONFIG_SAM34_HSMCI
-extern bool sam3u_cardinserted(unsigned char slot);
-#else
-#  define sam3u_cardinserted(slot) (false)
-#endif
-
-/****************************************************************************
- * Name: sam3u_writeprotected
- *
- * Description:
- *   Check if a card is inserted into the selected HSMCI slot
- *
- ****************************************************************************/
-
-#ifdef CONFIG_SAM34_HSMCI
-extern bool sam3u_writeprotected(unsigned char slot);
-#else
-#  define sam3u_writeprotected(slot) (false)
-#endif
-
-#endif /* __ASSEMBLY__ */
-#endif /* __CONFIGS_SAM3U_EK_SRC_SAM3UEK_INTERNAL_H */
-