Add sim/nsh2 configuration

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4026 42af7a65-404d-4744-a932-0658087f49c3

1 files changed, 799 insertions, 0 deletions

diff --git a/nuttx/configs/sim/nsh2/defconfig b/nuttx/configs/sim/nsh2/defconfig
new file mode 100644
index 000000000..60689afc1
--- /dev/null
+++ b/nuttx/configs/sim/nsh2/defconfig
@@ -0,0 +1,799 @@
+############################################################################
+# sim/nsh2/defconfig
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# Architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+#   processor architecture.
+# CONFIG_ARCH_name - for use in C code.  This identifies the particular
+#   processor architecture (CONFIG_ARCH_SIM).
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+#   the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+#
+CONFIG_ARCH=sim
+CONFIG_ARCH_SIM=y
+CONFIG_ARCH_BOARD=sim
+CONFIG_ARCH_BOARD_SIM=y
+
+#
+# Framebuffer driver options
+#
+CONFIG_FB_CMAP=y
+CONFIG_FB_HWCURSOR=n
+CONFIG_FB_HWCURSORIMAGE=n
+#CONFIG_FB_HWCURSORSIZE
+#CONFIG_FB_TRANSPARENCY
+
+#
+# Simulated framebuffer configuration
+#
+CONFIG_SIM_X11FB=y
+CONFIG_SIM_FBWIDTH=480
+CONFIG_SIM_FBHEIGHT=240
+CONFIG_SIM_FBBPP=32
+
+#
+# Simulated touchscreen configuration
+# (Set both of the following to 'y' to enable)
+#
+CONFIG_INPUT=y
+CONFIG_SIM_TOUCHSCREEN=y
+
+#
+# General OS setup
+#
+# CONFIG_APPS_DIR - Identifies the relative path to the directory
+#   that builds the application to link with NuttX.  Default: ../apps
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+#   debug symbols (needed for use with a debugger).
+# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+#   regions of memory to allocate from, this specifies the
+#   number of memory regions that the memory manager must
+#   handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+#   time console output
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
+#   inform NuttX that the processor hardware is providing
+#   system timer interrupts at some interrupt interval other
+#   than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+#   this number of milliseconds;  Round robin scheduling can
+#   be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
+#   scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+#   task name to save in the TCB.  Useful if scheduler
+#   instrumentation is selected.  Set to zero to disable.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+#   Used to initialize the internal time logic.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+#   provides /dev/console.  Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+#   driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+#   errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+#   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
+# CONFIG_SCHED_WORKQUEUE.  Create a dedicated "worker" thread to
+#  handle delayed processing from interrupt handlers.  This feature
+#  is required for some drivers but, if there are not complaints,
+#  can be safely disabled.  The worker thread also performs
+#  garbage collection -- completing any delayed memory deallocations
+#  from interrupt handlers.  If the worker thread is disabled,
+#  then that clean will be performed by the IDLE thread instead
+#  (which runs at the lowest of priority and may not be appropriate
+#  if memory reclamation is of high priority).  If CONFIG_SCHED_WORKQUEUE
+#  is enabled, then the following options can also be used:
+# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
+#  thread.  Default: 50
+# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
+#  work in units of microseconds.  Default: 50*1000 (50 MS).
+# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
+#  thread.  Default: CONFIG_IDLETHREAD_STACKSIZE.
+# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
+#  the worker thread.  Default: 4
+# CONFIG_SCHED_WAITPID - Enable the waitpid() API
+# CONFIG_SCHED_ATEXIT - Enabled the atexit() API
+#
+#CONFIG_APPS_DIR=
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_GRAPHICS=n
+CONFIG_DEBUG_INPUT=n
+CONFIG_HAVE_CXX=y
+CONFIG_MM_REGIONS=1
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=0
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=32
+CONFIG_START_YEAR=2011
+CONFIG_START_MONTH=10
+CONFIG_START_DAY=6
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=n
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=50
+CONFIG_SCHED_WORKPERIOD=(50*1000)
+CONFIG_SCHED_WORKSTACKSIZE=1024
+CONFIG_SIG_SIGWORK=4
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=y
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=y
+CONFIG_DISABLE_MOUNTPOINT=n
+CONFIG_DISABLE_ENVIRON=n
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+#   little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve sysem performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+#   BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+#   different loaders using the GNU objcopy program.  This option
+#   should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=n
+CONFIG_RAW_BINARY=n
+CONFIG_HAVE_LIBM=y
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+#   active tasks. This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+#   of parameters that a task may receive (i.e., maxmum value
+#   of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+#   specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+#   descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+#   can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+#   structures.  The system manages a pool of preallocated
+#   message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+#   a fixed payload size given by this settin (does not include
+#   other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+#   can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+#   structures.  The system manages a pool of preallocated
+#   watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+#   timer structures.  The system manages a pool of preallocated
+#   timer structures to minimize dynamic allocations.  Set to
+#   zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=64
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=32
+CONFIG_NFILE_STREAMS=16
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=1024
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=32
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=4
+CONFIG_PREALLOC_WDOGS=32
+CONFIG_PREALLOC_TIMERS=8
+
+#
+# Filesystem configuration
+#
+# CONFIG_FS_FAT - Enable FAT filesystem support
+# CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
+#   file name support.
+# CONFIG_FAT_LFN - Enable FAT long file names.  NOTE:  Microsoft claims
+#   patents on FAT long file name technology.  Please read the
+#   disclaimer in the top-level COPYING file and only enable this
+#   feature if you understand these issues.
+# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
+#   default, maximum long file name is 255 bytes.  This can eat up
+#   a lot of memory (especially stack space).  If you are willing
+#   to live with some non-standard, short long file names, then
+#   define this value.  A good choice would be the same value as
+#   selected for CONFIG_NAME_MAX which will limit the visibility
+#   of longer file names anyway.
+# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
+# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. 
+#   This must have one of the values of 0xff or 0x00.
+#   Default: 0xff.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
+#   Default: 255.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+#   Default: 32.
+# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
+#   packing files together toward the end of the file or, if file are
+#   deleted at the end of the file, clean up can simply mean erasing
+#   the end of FLASH memory so that it can be re-used again.  However,
+#   doing this can also harm the life of the FLASH part because it can
+#   mean that the tail end of the FLASH is re-used too often. This
+#   threshold determines if/when it is worth erased the tail end of FLASH
+#   and making it available for re-use (and possible over-wear).
+#   Default: 8192.
+# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
+#   option will enable a limited form of memory mapping that is
+#   implemented by copying whole files into memory.
+#
+CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
+CONFIG_FS_ROMFS=y
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
+#   accept() is called. The size of the backlog is selected when listen() is called.
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping response support on or off
+# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+#
+CONFIG_NET=n
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=n
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=n
+CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+#
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# Graphics related configuration settings
+#
+# CONFIG_NX
+#   Enables overall support for graphics library and NX
+# CONFIG_NX_MULTIUSER
+#   Configures NX in multi-user mode
+# CONFIG_NX_NPLANES
+#   Some YUV color formats requires support for multiple planes,
+#   one for each color component.  Unless you have such special
+#   hardware, this value should be undefined or set to 1
+# CONFIG_NX_DISABLE_1BPP, CONFIG_NX_DISABLE_2BPP,
+# CONFIG_NX_DISABLE_4BPP, CONFIG_NX_DISABLE_8BPP,
+# CONFIG_NX_DISABLE_16BPP, CONFIG_NX_DISABLE_24BPP, and
+# CONFIG_NX_DISABLE_32BPP
+#   NX supports a variety of pixel depths.  You can save some
+#   memory by disabling support for unused color depths.
+# CONFIG_NX_PACKEDMSFIRST
+#   If a pixel depth of less than 8-bits is used, then NX needs
+#   to know if the pixels pack from the MS to LS or from LS to MS
+# CONFIG_NX_MOUSE
+#   Build in support for mouse input
+# CONFIG_NX_KBD
+#   Build in support of keypad/keyboard input
+# CONFIG_NXTK_BORDERWIDTH
+#   Specifies with with of the border (in pixels) used with
+#   framed windows.  The default is 4.
+# CONFIG_NXTK_BORDERCOLOR1 and CONFIG_NXTK_BORDERCOLOR2
+#   Specify the colors of the border used with framed windows.
+#   CONFIG_NXTK_BORDERCOLOR2 is the shadow side color and so
+#   is normally darker.  The default is medium and dark grey,
+#   respectively
+# CONFIG_NXTK_AUTORAISE
+#   If set, a window will be raised to the top if the mouse position
+#   is over a visible portion of the window.  Default: A mouse
+#   button must be clicked over a visible portion of the window.
+# CONFIG_NXFONTS_CHARBITS
+#   The number of bits in the character set.  Current options are
+#   only 7 and 8.  The default is 7.
+# CONFIG_NXFONT_SANS23X27
+#   This option enables support for a tiny, 23x27 san serif font
+#   (font ID FONTID_SANS23X27 == 1).
+# CONFIG_NXFONT_SANS22X29
+#   This option enables support for a small, 22x29 san serif font
+#   (font ID FONTID_SANS22X29 == 2).
+# CONFIG_NXFONT_SANS28X37
+#   This option enables support for a medium, 28x37 san serif font
+#   (font ID FONTID_SANS28X37 == 3).
+# CONFIG_NXFONT_SANS39X48
+#   This option enables support for a large, 39x48 san serif font
+#   (font ID FONTID_SANS39X48 == 4).
+# CONFIG_NXFONT_SANS22X29B
+#   This option enables support for a small, 22x29 san serif bold font
+#   (font ID FONTID_SANS22X29B == 5).
+# CONFIG_NXFONT_SANS28X37B
+#   This option enables support for a medium, 28x37 san serif bold font
+#   (font ID FONTID_SANS28X37B == 6).
+# CONFIG_NXFONT_SANS40X49B
+#   This option enables support for a large, 40x49 san serif bold font
+#   (font ID FONTID_SANS40X49B == 7).
+# CONFIG_NXFONT_SERIF22X29
+#   This option enables support for a small, 22x29 font (with serifs)
+#   (font ID FONTID_SERIF22X29 == 8).
+# CONFIG_NXFONT_SERIF29X37
+#   This option enables support for a medium, 29x37 font (with serifs)
+#   (font ID FONTID_SERIF29X37 == 9).
+# CONFIG_NXFONT_SERIF38X48
+#   This option enables support for a large, 38x48 font (with serifs)
+#   (font ID FONTID_SERIF38X48 == 10).
+# CONFIG_NXFONT_SERIF22X28B
+#   This option enables support for a small, 27x38 bold font (with serifs)
+#   (font ID FONTID_SERIF22X28B == 11).
+# CONFIG_NXFONT_SERIF27X38B
+#   This option enables support for a medium, 27x38 bold font (with serifs)
+#   (font ID FONTID_SERIF27X38B == 12).
+# CONFIG_NXFONT_SERIF38X49B
+#   This option enables support for a large, 38x49 bold font (with serifs)
+#   (font ID FONTID_SERIF38X49B == 13).
+#
+# NX Multi-user only options:
+#
+# CONFIG_NX_BLOCKING
+#   Open the client message queues in blocking mode.  In this case,
+#   nx_eventhandler()  will not return until a message is received and processed.
+# CONFIG_NX_MXSERVERMSGS and CONFIG_NX_MXCLIENTMSGS
+#   Specifies the maximum number of messages that can fit in
+#   the message queues.  No additional resources are allocated, but
+#   this can be set to prevent flooding of the client or server with
+#   too many messages (CONFIG_PREALLOC_MQ_MSGS controls how many
+#   messages are pre-allocated).
+#
+CONFIG_NX=y
+CONFIG_NX_MULTIUSER=n
+CONFIG_NX_NPLANES=1
+CONFIG_NX_DISABLE_1BPP=y
+CONFIG_NX_DISABLE_2BPP=y
+CONFIG_NX_DISABLE_4BPP=y
+CONFIG_NX_DISABLE_8BPP=y
+CONFIG_NX_DISABLE_16BPP=y
+CONFIG_NX_DISABLE_24BPP=y
+CONFIG_NX_DISABLE_32BPP=n
+CONFIG_NX_PACKEDMSFIRST=n
+CONFIG_NX_MOUSE=y
+CONFIG_NX_KBD=y
+#CONFIG_NXTK_BORDERWIDTH=4
+#CONFIG_NXTK_BORDERCOLOR1
+#CONFIG_NXTK_BORDERCOLOR2
+CONFIG_NXTK_AUTORAISE=n
+CONFIG_NXFONT_SANS22X29=n
+CONFIG_NXFONT_SANS23X27=y
+CONFIG_NXFONT_SANS28X37=n
+CONFIG_NXFONT_SANS22X29B=n
+CONFIG_NXFONT_SANS28X37B=y
+CONFIG_NXFONT_SANS40X49B=n
+CONFIG_NXFONT_SERIF22X29=n
+CONFIG_NXFONT_SERIF29X37=n
+CONFIG_NXFONT_SERIF38X48=n
+CONFIG_NXFONT_SERIF22X28B=n
+CONFIG_NXFONT_SERIF27X38B=n
+CONFIG_NXFONT_SERIF38X49B=n
+CONFIG_NXFONTS_CHARBITS=7
+CONFIG_NX_BLOCKING=y
+CONFIG_NX_MXSERVERMSGS=32
+CONFIG_NX_MXCLIENTMSGS=16
+
+#
+# Settings for examples/uip
+#
+CONFIG_EXAMPLE_UIP_IPADDR=(192<<24|168<<16|0<<8|128)
+CONFIG_EXAMPLE_UIP_DRIPADDR=(192<<24|168<<16|0<<8|1)
+CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+#
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=n
+CONFIG_EXAMPLE_NETTEST_IPADDR=(192<<24|168<<16|0<<8|128)
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=(192<<24|168<<16|0<<8|1)
+CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=(192<<24|168<<16|0<<8|106)
+
+#
+# Settings for examples/ostest
+#
+CONFIG_EXAMPLES_OSTEST_LOOPS=100
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=8192
+
+#
+# Settings for apps/nshlib
+#
+# CONFIG_NSH_BUILTIN_APPS - Support external registered,
+#   "named" applications that can be executed from the NSH
+#   command line (see apps/README.txt for more information).
+# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_NSH_STRERROR - Use strerror(errno)
+# CONFIG_NSH_LINELEN - Maximum length of one command line
+# CONFIG_NSH_STACKSIZE - Stack size to use for new threads.
+# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_NSH_DISABLEBG - Disable background commands
+# CONFIG_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_NSH_CONSOLE - Use serial console front end
+# CONFIG_NSH_CONDEV - Select the serial device used to support
+#   the NSH console.  Default: stdin and stdout
+# CONFIG_NSH_TELNET - Use telnetd console front end
+#
+# If CONFIG_NSH_TELNET is selected:
+# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
+# CONFIG_NSH_DHCPC - Obtain address using DHCP
+# CONFIG_NSH_IPADDR - Provides static IP address
+# CONFIG_NSH_DRIPADDR - Provides static router IP address
+# CONFIG_NSH_NETMASK - Provides static network mask
+# CONFIG_NSH_NOMAC - Use a bogus MAC address
+#
+# If CONFIG_NSH_ROMFSETC is selected:
+# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint
+# CONFIG_NSH_INITSCRIPT - Relative path to init script
+# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor
+# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size
+# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor
+# CONFIG_NSH_FATSECTSIZE - FAT FS sector size
+# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
+# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
+#
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=1024
+CONFIG_NSH_STRERROR=n
+CONFIG_NSH_LINELEN=80
+CONFIG_NSH_STACKSIZE=4096
+CONFIG_NSH_NESTDEPTH=3
+CONFIG_NSH_DISABLESCRIPT=n
+CONFIG_NSH_DISABLEBG=n
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_CONSOLE=y
+#CONFIG_NSH_CONDEV="/dev/ttyS1"
+CONFIG_NSH_TELNET=n
+CONFIG_NSH_IOBUFFER_SIZE=512
+CONFIG_NSH_DHCPC=n
+CONFIG_NSH_NOMAC=n
+CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=1
+CONFIG_NSH_ROMFSSECTSIZE=64
+CONFIG_NSH_FATDEVNO=2
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT=/tmp
+
+#
+# Settings for examples/nx
+#
+# CONFIG_EXAMPLES_NX_BUILTIN -- Build the NX example as a "built-in"
+#  that can be executed from the NSH command line
+# CONFIG_EXAMPLES_NX_VPLANE -- The plane to select from the frame-
+#   buffer driver for use in the test.  Default: 0
+# CONFIG_EXAMPLES_NX_BGCOLOR -- The color of the background.  Default depends on
+#   CONFIG_EXAMPLES_NX_BPP.
+# CONFIG_EXAMPLES_NX_COLOR1 -- The color of window 1. Default depends on
+#   CONFIG_EXAMPLES_NX_BPP.
+# CONFIG_EXAMPLES_NX_COLOR2 -- The color of window 2. Default depends on
+#   CONFIG_EXAMPLES_NX_BPP.
+# CONFIG_EXAMPLES_NX_TBCOLOR -- The color of the toolbar. Default depends on
+#   CONFIG_EXAMPLES_NX_BPP.
+# CONFIG_EXAMPLES_NX_FONTCOLOR -- The color of the toolbar. Default depends on
+#   CONFIG_EXAMPLES_NX_BPP.
+# CONFIG_EXAMPLES_NX_BPP -- Pixels per pixel to use.  Valid options
+#   include 2, 4, 8, 16, 24, and 32.  Default is 32.
+# CONFIG_EXAMPLES_NX_RAWWINDOWS -- Use raw windows;  Default is to
+#   use pretty, framed NXTK windows with toolbars.
+# CONFIG_EXAMPLES_NX_STACKSIZE -- The stacksize to use when creating
+#   the NX server.  Default 2048
+# CONFIG_EXAMPLES_NX_CLIENTPRIO -- The client priority.  Default: 80
+# CONFIG_EXAMPLES_NX_SERVERPRIO -- The server priority.  Default: 120
+# CONFIG_EXAMPLES_NX_NOTIFYSIGNO -- The signal number to use with
+#   nx_eventnotify().  Default: 4
+#
+CONFIG_EXAMPLES_NX_BUILTIN=y
+CONFIG_EXAMPLES_NX_VPLANE=0
+#CONFIG_EXAMPLES_NX_BGCOLOR
+#CONFIG_EXAMPLES_NX_COLOR1
+#CONFIG_EXAMPLES_NX_COLOR2
+#CONFIG_EXAMPLES_NX_TBCOLOR
+#CONFIG_EXAMPLES_NX_FONTCOLOR
+CONFIG_EXAMPLES_NX_BPP=CONFIG_SIM_FBBPP
+CONFIG_EXAMPLES_NX_RAWWINDOWS=n
+CONFIG_EXAMPLES_NX_STACKSIZE=8192
+CONFIG_EXAMPLES_NX_CLIENTPRIO=80
+CONFIG_EXAMPLES_NX_SERVERPRIO=120
+CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4
+
+#
+# Settings for examples/nxhello
+#
+# CONFIG_EXAMPLES_NXHELLO_BUILTIN -- Build the NXHELLO example as a "built-in"
+#   that can be executed from the NSH command line
+# CONFIG_EXAMPLES_NXHELLO_VPLANE -- The plane to select from the frame-
+#   buffer driver for use in the test.  Default: 0
+# CONFIG_EXAMPLES_NXHELLO_BGCOLOR -- The color of the background.  Default
+#   depends on CONFIG_EXAMPLES_NXHELLO_BPP.
+# CONFIG_EXAMPLES_NXHELLO_FONTID - Selects the font (see font ID numbers in
+#   include/nuttx/nx/nxfonts.h)
+# CONFIG_EXAMPLES_NXHELLO_FONTCOLOR -- The color of the fonts used in the
+#   background window. Default depends on CONFIG_EXAMPLES_NXHELLO_BPP.
+# CONFIG_EXAMPLES_NXHELLO_BPP -- Pixels per pixel to use.  Valid options
+#   include 2, 4, 8, 16, 24, and 32.  Default is 32.
+# CONFIG_EXAMPLES_NXHELLO_EXTERNINIT - The driver for the graphics device on
+#   this platform requires some unusual initialization.  This is the
+#   for, for example, SPI LCD/OLED devices.  If this configuration is
+#   selected, then the platform code must provide an LCD initialization
+#   function.
+#
+CONFIG_EXAMPLES_NXHELLO_BUILTIN=y
+CONFIG_EXAMPLES_NXHELLO_VPLANE=0
+#CONFIG_EXAMPLES_NXHELLO_BGCOLOR
+CONFIG_EXAMPLES_NXHELLO_FONTID=6
+#CONFIG_EXAMPLES_NXHELLO_FONTCOLOR
+CONFIG_EXAMPLES_NXHELLO_BPP=CONFIG_SIM_FBBPP
+CONFIG_EXAMPLES_NXHELLO_EXTERNINIT=n
+
+#
+# Settings for examples/nxlines
+#
+# CONFIG_EXAMPLES_NXLINES_BUILTIN -- Build the NXLINES example as a "built-in"
+#   that can be executed from the NSH command line
+# CONFIG_EXAMPLES_NXLINES_VPLANE -- The plane to select from the frame-
+#   buffer driver for use in the test.  Default: 0
+# CONFIG_EXAMPLES_NXLINES_BGCOLOR -- The color of the background.  Default
+#   depends on CONFIG_EXAMPLES_NXLINES_BPP.
+# CONFIG_EXAMPLES_NXLINES_LINEWIDTH - Selects the width of the lines in
+#   pixels (default: 16)
+# CONFIG_EXAMPLES_NXLINES_LINECOLOR -- The color of the central lines drawn
+#   in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP
+#   (there really is no meaningful default).
+# CONFIG_EXAMPLES_NXLINES_BORDERWIDTH -- The width of the circular border
+#   drawn in the background window. (default: 4).
+# CONFIG_EXAMPLES_NXLINES_BORDERCOLOR -- The color of the circular border
+#   drawn in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP
+#   (there really is no meaningful default).
+# CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR -- The color of the circular region
+#   filled in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP
+#   (there really is no meaningful default).
+# CONFIG_EXAMPLES_NXLINES_BPP -- Pixels per pixel to use.  Valid options
+#   include 2, 4, 8, 16, 24, and 32.  Default is 16.
+# CONFIG_EXAMPLES_NXLINES_EXTERNINIT - The driver for the graphics device on
+#   this platform requires some unusual initialization.  This is the
+#   for, for example, SPI LCD/OLED devices.  If this configuration is
+#   selected, then the platform code must provide an LCD initialization
+#   function.
+#
+CONFIG_EXAMPLES_NXLINES_BUILTIN=n
+CONFIG_EXAMPLES_NXLINES_VPLANE=0
+#CONFIG_EXAMPLES_NXLINES_BGCOLOR
+CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16
+#CONFIG_EXAMPLES_NXLINES_LINECOLOR
+CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=4
+#CONFIG_EXAMPLES_NXLINES_BORDERCOLOR
+#CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR
+CONFIG_EXAMPLES_NXLINES_BPP=CONFIG_SIM_FBBPP
+CONFIG_EXAMPLES_NXLINES_EXTERNINIT=n
+
+#
+# Settings for examples/touchscreen
+#
+# CONFIG_EXAMPLES_TOUCHSCREEN_BUILTIN - Build the touchscreen test as
+#   an NSH built-in function.  Default: Built as a standalone problem
+# CONFIG_EXAMPLES_TOUCHSCREEN_MINOR - The minor device number.  Minor=N
+#   correspnds to touchscreen device /dev/input0.  Note this value must
+#   with CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH.  Default 0.
+# CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH - The path to the touchscreen
+#   device.  This must be consistent with CONFIG_EXAMPLES_TOUCHSCREEN_MINOR.
+#   Default: "/dev/input0"
+# CONFIG_EXAMPLES_TOUCHSCREEN_NSAMPLES - If CONFIG_EXAMPLES_TOUCHSCREEN_BUILTIN
+#   is defined, then the number of samples is provided on the command line
+#   and this value is ignored.  Otherwise, this number of samples is
+#   collected and the program terminates.  Default:  Samples are collected
+#   indefinitely.
+#
+CONFIG_EXAMPLES_TOUCHSCREEN_BUILTIN=y
+CONFIG_EXAMPLES_TOUCHSCREEN_MINOR=0
+CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH="/dev/input0"
+CONFIG_EXAMPLES_TOUCHSCREEN_NSAMPLES=25
+
+#
+# Settings for examples/mount
+#
+CONFIG_EXAMPLES_MOUNT_DEVNAME="/dev/ram0"
+#CONFIG_EXAMPLES_MOUNT_NSECTORS=2048
+#CONFIG_EXAMPLES_MOUNT_SECTORSIZE=512
+#CONFIG_EXAMPLES_MOUNT_RAMDEVNO=1
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+#   operation from FLASH but must copy initialized .data sections to RAM.
+# CONFIG_BOOT_COPYTORAM -  Some configurations boot in FLASH
+#   but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+#   all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+#  This is the thread that (1) performs the inital boot of the system up
+#  to the point where user_start() is spawned, and (2) there after is the
+#  IDLE thread that executes only when there is no other thread ready to
+#  run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+#  for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_IDLETHREAD_STACKSIZE=4096
+CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=8192
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=