diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-08-30 15:44:02 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-08-30 15:44:02 +0000 |
commit | 7b13fdf0152c49dc131313a795c373de3b5af50d (patch) | |
tree | fb0e696eadd71e55262e9ab4fbbed7ca2723fda4 /nuttx/configs/sim/nx | |
parent | a21218519751fd36fd99c6c1bac28693c7d2a7cc (diff) | |
download | px4-nuttx-7b13fdf0152c49dc131313a795c373de3b5af50d.tar.gz px4-nuttx-7b13fdf0152c49dc131313a795c373de3b5af50d.tar.bz2 px4-nuttx-7b13fdf0152c49dc131313a795c373de3b5af50d.zip |
Remove documentation from defconfig files so that they are more maintainable
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5068 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/configs/sim/nx')
-rw-r--r-- | nuttx/configs/sim/nx/defconfig | 333 |
1 files changed, 1 insertions, 332 deletions
diff --git a/nuttx/configs/sim/nx/defconfig b/nuttx/configs/sim/nx/defconfig index ff4b231af..ae4fde6f0 100644 --- a/nuttx/configs/sim/nx/defconfig +++ b/nuttx/configs/sim/nx/defconfig @@ -35,15 +35,6 @@ # # Architecture selection # -# CONFIG_ARCH - identifies the arch subdirectory and, hence, the -# processor architecture. -# CONFIG_ARCH_name - for use in C code. This identifies the particular -# processor architecture (CONFIG_ARCH_SIM). -# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, -# the board that supports the particular chip or SoC. -# CONFIG_ARCH_BOARD_name - for use in C code -# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) -# CONFIG_ARCH="sim" CONFIG_ARCH_SIM=y CONFIG_ARCH_BOARD="sim" @@ -60,73 +51,6 @@ CONFIG_SIM_FBBPP=8 # # General OS setup # -# CONFIG_APPS_DIR - Identifies the relative path to the directory -# that builds the application to link with NuttX. Default: ../apps -# CONFIG_DEBUG - enables built-in debug options -# CONFIG_DEBUG_VERBOSE - enables verbose debug output -# CONFIG_DEBUG_SYMBOLS - build without optimization and with -# debug symbols (needed for use with a debugger). -# CONFIG_HAVE_CXX - Enable support for C++ -# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support -# for initialization of static C++ instances for this architecture -# and for the selected toolchain (via up_cxxinitialize()). -# CONFIG_MM_REGIONS - If the architecture includes multiple -# regions of memory to allocate from, this specifies the -# number of memory regions that the memory manager must -# handle and enables the API mm_addregion(start, end); -# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot -# time console output -# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz -# or MSEC_PER_TICK=10. This setting may be defined to -# inform NuttX that the processor hardware is providing -# system timer interrupts at some interrupt interval other -# than 10 msec. -# CONFIG_RR_INTERVAL - The round robin timeslice will be set -# this number of milliseconds; Round robin scheduling can -# be disabled by setting this value to zero. -# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in -# scheduler to monitor system performance -# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a -# task name to save in the TCB. Useful if scheduler -# instrumentation is selected. Set to zero to disable. -# CONFIG_JULIAN_TIME - Enables Julian time conversions -# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - -# Used to initialize the internal time logic. -# CONFIG_DEV_CONSOLE - Set if architecture-specific logic -# provides /dev/console. Enables stdout, stderr, stdin. -# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console -# driver (minimul support) -# CONFIG_MUTEX_TYPES: Set to enable support for recursive and -# errorcheck mutexes. Enables pthread_mutexattr_settype(). -# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority -# inheritance on mutexes and semaphores. -# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority -# inheritance is enabled. It defines the maximum number of -# different threads (minus one) that can take counts on a -# semaphore with priority inheritance support. This may be -# set to zero if priority inheritance is disabled OR if you -# are only using semaphores as mutexes (only one holder) OR -# if no more than two threads participate using a counting -# semaphore. -# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, -# then this setting is the maximum number of higher priority -# threads (minus 1) than can be waiting for another thread -# to release a count on a semaphore. This value may be set -# to zero if no more than one thread is expected to wait for -# a semaphore. -# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors -# by task_create() when a new task is started. If set, all -# files/drivers will appear to be closed in the new task. -# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first -# three file descriptors (stdin, stdout, stderr) by task_create() -# when a new task is started. If set, all files/drivers will -# appear to be closed in the new task except for stdin, stdout, -# and stderr. -# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket -# desciptors by task_create() when a new task is started. If -# set, all sockets will appear to be closed in the new task. -# -#CONFIG_APPS_DIR= CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_SYMBOLS=n @@ -179,9 +103,6 @@ CONFIG_DISABLE_POLL=y # # Misc libc settings # -# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a -# little smaller if we do not support fieldwidthes -# CONFIG_NOPRINTF_FIELDWIDTH=n # @@ -204,16 +125,6 @@ CONFIG_ARCH_BZERO=n # # General build options # -# CONFIG_RRLOAD_BINARY - make the rrload binary format used with -# BSPs from www.ridgerun.com using the tools/mkimage.sh script -# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_RAW_BINARY - make a raw binary format file used with many -# different loaders using the GNU objcopy program. This option -# should not be selected if you are not using the GNU toolchain. -# CONFIG_HAVE_LIBM - toolchain supports libm.a -# CONFIG_RRLOAD_BINARY=n CONFIG_INTELHEX_BINARY=n CONFIG_RAW_BINARY=n @@ -222,38 +133,6 @@ CONFIG_HAVE_LIBM=y # # Sizes of configurable things (0 disables) # -# CONFIG_MAX_TASKS - The maximum number of simultaneously -# active tasks. This value must be a power of two. -# CONFIG_MAX_TASK_ARGS - This controls the maximum number of -# of parameters that a task may receive (i.e., maxmum value -# of 'argc') -# CONFIG_NPTHREAD_KEYS - The number of items of thread- -# specific data that can be retained -# CONFIG_NFILE_DESCRIPTORS - The maximum number of file -# descriptors (one for each open) -# CONFIG_NFILE_STREAMS - The maximum number of streams that -# can be fopen'ed -# CONFIG_NAME_MAX - The maximum size of a file name. -# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate -# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_NUNGET_CHARS - Number of characters that can be -# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message -# structures. The system manages a pool of preallocated -# message structures to minimize dynamic allocations -# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with -# a fixed payload size given by this settin (does not include -# other message structure overhead. -# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that -# can be passed to a watchdog handler -# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog -# structures. The system manages a pool of preallocated -# watchdog structures to minimize dynamic allocations -# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX -# timer structures. The system manages a pool of preallocated -# timer structures to minimize dynamic allocations. Set to -# zero for all dynamic allocations. -# CONFIG_MAX_TASKS=16 CONFIG_MAX_TASK_ARGS=4 CONFIG_NPTHREAD_KEYS=4 @@ -280,40 +159,12 @@ CONFIG_FB_HWCURSORIMAGE=n # # FAT filesystem configuration # -# CONFIG_FS_FAT - Enable FAT filesystem support -# CONFIG_FAT_SECTORSIZE - Max supported sector size -# CONFIG_FS_ROMFS - Enable ROMFS filesystem support -# CONFIG_FS_FAT=n CONFIG_FS_ROMFS=n # # TCP/IP and UDP support via uIP # -# CONFIG_NET - Enable or disable all network features -# CONFIG_NET_IPv6 - Build in support for IPv6 -# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. -# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options -# CONFIG_NET_BUFSIZE - uIP buffer size -# CONFIG_NET_TCP - TCP support on or off -# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) -# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers -# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) -# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until -# accept() is called. The size of the backlog is selected when listen() is called. -# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) -# CONFIG_NET_UDP - UDP support on or off -# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off -# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections -# CONFIG_NET_ICMP - ICMP ping response support on or off -# CONFIG_NET_ICMP_PING - ICMP ping request support on or off -# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address -# CONFIG_NET_STATISTICS - uIP statistics on or off -# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window -# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table -# CONFIG_NET_BROADCAST - Broadcast support -# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates -# CONFIG_NET=n CONFIG_NET_IPv6=n CONFIG_NSOCKET_DESCRIPTORS=0 @@ -337,67 +188,12 @@ CONFIG_NET_BROADCAST=n # # UIP Network Utilities # -# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP -# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries -# CONFIG_NET_DHCP_LIGHT=n CONFIG_NET_RESOLV_ENTRIES=4 # # Graphics related configuration settings # -# CONFIG_NX -# Enables overall support for graphics library and NX -# CONFIG_NX_MULTIUSER -# Configures NX in multi-user mode -# CONFIG_NX_NPLANES -# Some YUV color formats requires support for multiple planes, -# one for each color component. Unless you have such special -# hardware, this value should be undefined or set to 1 -# CONFIG_NX_DISABLE_1BPP, CONFIG_NX_DISABLE_2BPP, -# CONFIG_NX_DISABLE_4BPP, CONFIG_NX_DISABLE_8BPP, -# CONFIG_NX_DISABLE_16BPP, CONFIG_NX_DISABLE_24BPP, and -# CONFIG_NX_DISABLE_32BPP -# NX supports a variety of pixel depths. You can save some -# memory by disabling support for unused color depths. -# CONFIG_NX_PACKEDMSFIRST -# If a pixel depth of less than 8-bits is used, then NX needs -# to know if the pixels pack from the MS to LS or from LS to MS -# CONFIG_NX_MOUSE -# Build in support for mouse input -# CONFIG_NX_KBD -# Build in support of keypad/keyboard input -# CONFIG_NXTK_BORDERWIDTH -# Specifies with with of the border (in pixels) used with -# framed windows. The default is 4. -# CONFIG_NXTK_BORDERCOLOR1 and CONFIG_NXTK_BORDERCOLOR2 -# Specify the colors of the border used with framed windows. -# CONFIG_NXTK_BORDERCOLOR2 is the shadow side color and so -# is normally darker. The default is medium and dark grey, -# respectively -# CONFIG_NXTK_AUTORAISE -# If set, a window will be raised to the top if the mouse position -# is over a visible portion of the window. Default: A mouse -# button must be clicked over a visible portion of the window. -# CONFIG_NXFONTS_CHARBITS -# The number of bits in the character set. Current options are -# only 7 and 8. The default is 7. -# CONFIG_NXFONT_SANS23X27 -# At present, there is only one font. But if there were were more, -# then this option would select the sans serif font. -# -# NX Multi-user only options: -# -# CONFIG_NX_BLOCKING -# Open the client message queues in blocking mode. In this case, -# nx_eventhandler() will not return until a message is received and processed. -# CONFIG_NX_MXSERVERMSGS and CONFIG_NX_MXCLIENTMSGS -# Specifies the maximum number of messages that can fit in -# the message queues. No additional resources are allocated, but -# this can be set to prevent flooding of the client or server with -# too many messages (CONFIG_PREALLOC_MQ_MSGS controls how many -# messages are pre-allocated). -# CONFIG_NX=y CONFIG_NX_MULTIUSER=n CONFIG_NX_NPLANES=1 @@ -424,39 +220,10 @@ CONFIG_NX_MXCLIENTMSGS=16 # # NxConsole Configuration Settings: # -# CONFIG_NXCONSOLE -# Enables building of the NxConsole driver. -# CONFIG_NXCONSOLE_BPP -# Currently, NxConsole supports only a single pixel depth. This -# configuration setting must be provided to support that single pixel depth. -# Default: The smallest enabled pixel depth. (see CONFIG_NX_DISABLE_*BPP) -# CONFIG_NXCONSOLE_MXCHARS -# NxConsole needs to remember every character written to the console so -# that it can redraw the window. This setting determines the size of some -# internal memory allocations used to hold the character data. Default: 128. -# CONFIG_NXCONSOLE_CACHESIZE -# NxConsole supports caching of rendered fonts. This font caching is required -# for two reasons: (1) First, it improves text performance, but more -# importantly (2) it preserves the font memory. Since the NX server runs on -# a separate server thread, it requires that the rendered font memory persist -# until the server has a chance to render the font. (NOTE: There is still -# inherently a race condition in this!). Unfortunately, the font cache would -# be quite large if all fonts were saved. The CONFIG_NXCONSOLE_CACHESIZE setting -# will control the size of the font cache (in number of glyphs). Only that -# number of the most recently used glyphs will be retained. Default: 16. -# CONFIG_NXCONSOLE_LINESEPARATION -# This the space (in rows) between each row of test. Default: 2 -# CONFIG_NXCONSOLE_NOWRAP -# By default, lines will wrap when the test reaches the right hand side -# of the window. This setting can be defining to change this behavior so -# that the text is simply truncated until a new line is encountered. -# CONFIG_NXCONSOLE=n CONFIG_NXCONSOLE_BPP=8 CONFIG_NXCONSOLE_MXCHARS=256 -# CONFIG_NXCONSOLE_CACHESIZE -# CONFIG_NXCONSOLE_LINESEPARATION -# CONFIG_NXCONSOLE_NOWRAP +# # # Settings for examples/uip @@ -486,34 +253,6 @@ CONFIG_EXAMPLES_OSTEST_STACKSIZE=8192 # # Settings for apps/nshlib # -# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer -# CONFIG_NSH_STRERROR - Use strerror(errno) -# CONFIG_NSH_LINELEN - Maximum length of one command line -# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi -# CONFIG_NSH_DISABLESCRIPT - Disable scripting support -# CONFIG_NSH_DISABLEBG - Disable background commands -# CONFIG_NSH_ROMFSETC - Use startup script in /etc -# CONFIG_NSH_CONSOLE - Use serial console front end -# CONFIG_NSH_TELNET - Use telnetd console front end -# -# If CONFIG_NSH_TELNET is selected: -# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size -# CONFIG_NSH_DHCPC - Obtain address using DHCP -# CONFIG_NSH_IPADDR - Provides static IP address -# CONFIG_NSH_DRIPADDR - Provides static router IP address -# CONFIG_NSH_NETMASK - Provides static network mask -# CONFIG_NSH_NOMAC - Use a bogus MAC address -# -# If CONFIG_NSH_ROMFSETC is selected: -# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint -# CONFIG_NSH_INITSCRIPT - Relative path to init script -# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor -# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size -# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor -# CONFIG_NSH_FATSECTSIZE - FAT FS sector size -# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors -# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint -# CONFIG_NSH_FILEIOSIZE=1024 CONFIG_NSH_STRERROR=n CONFIG_NSH_LINELEN=80 @@ -541,28 +280,6 @@ CONFIG_NSH_FATMOUNTPT=/tmp # # Settings for examples/nx # -# CONFIG_EXAMPLES_NX_VPLANE -- The plane to select from the frame- -# buffer driver for use in the test. Default: 0 -# CONFIG_EXAMPLES_NX_BGCOLOR -- The color of the background. Default depends on -# CONFIG_EXAMPLES_NX_BPP. -# CONFIG_EXAMPLES_NX_COLOR1 -- The color of window 1. Default depends on -# CONFIG_EXAMPLES_NX_BPP. -# CONFIG_EXAMPLES_NX_COLOR2 -- The color of window 2. Default depends on -# CONFIG_EXAMPLES_NX_BPP. -# CONFIG_EXAMPLES_NX_TBCOLOR -- The color of the toolbar. Default depends on -# CONFIG_EXAMPLES_NX_BPP. -# CONFIG_EXAMPLES_NX_FONTCOLOR -- The color of the toolbar. Default depends on -# CONFIG_EXAMPLES_NX_BPP. -# CONFIG_EXAMPLES_NX_BPP -- Pixels per pixel to use. Valid options -# include 2, 4, 8, 16, 24, and 32. Default is 32. -# CONFIG_EXAMPLES_NX_RAWWINDOWS -- Use raw windows; Default is to -# use pretty, framed NXTK windows with toolbars. -# CONFIG_EXAMPLES_NX_STACKSIZE -- The stacksize to use when creating -# the NX server. Default 2048 -# CONFIG_EXAMPLES_NX_CLIENTPRIO -- The client priority. Default: 80 -# CONFIG_EXAMPLES_NX_SERVERPRIO -- The server priority. Default: 120 -# CONFIG_EXAMPLES_NX_NOTIFYSIGNO -- The signal number to use with -# nx_eventnotify(). Default: 4 CONFIG_EXAMPLES_NX_VPLANE=0 #CONFIG_EXAMPLES_NX_BGCOLOR #CONFIG_EXAMPLES_NX_COLOR1 @@ -579,35 +296,6 @@ CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4 # # Settings for examples/nxlines # -# CONFIG_EXAMPLES_NXLINES_BUILTIN -- Build the NXLINES example as a "built-in" -# that can be executed from the NSH command line -# CONFIG_EXAMPLES_NXLINES_VPLANE -- The plane to select from the frame- -# buffer driver for use in the test. Default: 0 -# CONFIG_EXAMPLES_NXLINES_DEVNO - The LCD device to select from the LCD -# driver for use in the test: Default: 0 -# CONFIG_EXAMPLES_NXLINES_BGCOLOR -- The color of the background. Default -# depends on CONFIG_EXAMPLES_NXLINES_BPP. -# CONFIG_EXAMPLES_NXLINES_LINEWIDTH - Selects the width of the lines in -# pixels (default: 16) -# CONFIG_EXAMPLES_NXLINES_LINECOLOR -- The color of the central lines drawn -# in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP -# (there really is no meaningful default). -# CONFIG_EXAMPLES_NXLINES_BORDERWIDTH -- The width of the circular border -# drawn in the background window. (default: 4). -# CONFIG_EXAMPLES_NXLINES_BORDERCOLOR -- The color of the circular border -# drawn in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP -# (there really is no meaningful default). -# CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR -- The color of the circular region -# filled in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP -# (there really is no meaningful default). -# CONFIG_EXAMPLES_NXLINES_BPP -- Pixels per pixel to use. Valid options -# include 2, 4, 8, 16, 24, and 32. Default is 16. -# CONFIG_EXAMPLES_NXLINES_EXTERNINIT - The driver for the graphics device on -# this platform requires some unusual initialization. This is the -# for, for example, SPI LCD/OLED devices. If this configuration is -# selected, then the platform code must provide an LCD initialization -# function. -# CONFIG_EXAMPLES_NXLINES_BUILTIN=n CONFIG_EXAMPLES_NXLINES_VPLANE=0 CONFIG_EXAMPLES_NXLINES_DEVNO=0 @@ -628,25 +316,6 @@ CONFIG_EXAMPLES_MOUNT_DEVNAME="/dev/ram0" # # Stack and heap information # -# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP -# operation from FLASH but must copy initialized .data sections to RAM. -# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH -# but copy themselves entirely into RAM for better performance. -# CONFIG_CUSTOM_STACK - The up_ implementation will handle -# all stack operations outside of the nuttx model. -# CONFIG_STACK_POINTER - The initial stack pointer -# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. -# This is the thread that (1) performs the inital boot of the system up -# to the point where user_start() is spawned, and (2) there after is the -# IDLE thread that executes only when there is no other thread ready to -# run. -# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate -# for the main user thread that begins at the user_start() entry point. -# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size -# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size -# CONFIG_HEAP_BASE - The beginning of the heap -# CONFIG_HEAP_SIZE - The size of the heap -# CONFIG_BOOT_RUNFROMFLASH=n CONFIG_BOOT_COPYTORAM=n CONFIG_CUSTOM_STACK=n |