The content for uIP web server demo is no longer canned, but is not built dynameically (Thanks to Max Holtzberg)

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5073 42af7a65-404d-4744-a932-0658087f49c3

1 files changed, 854 insertions, 0 deletions

diff --git a/nuttx/configs/stm3240g-eval/webserver/defconfig b/nuttx/configs/stm3240g-eval/webserver/defconfig
new file mode 100644
index 000000000..0a625f93f
--- /dev/null
+++ b/nuttx/configs/stm3240g-eval/webserver/defconfig
@@ -0,0 +1,854 @@
+############################################################################
+# configs/stm3240g-eval/webserver/defconfig
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# Architecture Selection
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM4=y
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32F407IG=y
+CONFIG_ARCH_BOARD="stm3240g-eval"
+CONFIG_ARCH_BOARD_STM3240G_EVAL=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_DRAM_SIZE=0x00030000
+CONFIG_DRAM_START=0x20000000
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_FPU=n
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
+
+#
+# Identify toolchain and linker options
+#
+CONFIG_STM32_CODESOURCERYW=n
+CONFIG_STM32_CODESOURCERYL=y
+CONFIG_STM32_ATOLLIC_LITE=n
+CONFIG_STM32_ATOLLIC_PRO=n
+CONFIG_STM32_DEVKITARM=n
+CONFIG_STM32_RAISONANCE=n
+CONFIG_STM32_BUILDROOT=n
+
+#
+# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
+#
+CONFIG_STM32_DFU=n
+CONFIG_STM32_JTAG_FULL_ENABLE=y
+CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
+CONFIG_STM32_JTAG_SW_ENABLE=n
+
+#
+# On-chip CCM SRAM configuration
+#
+
+#
+# On-board FSMC SRAM configuration
+#
+CONFIG_STM32_FSMC_SRAM=y
+CONFIG_HEAP2_BASE=0x64000000
+CONFIG_HEAP2_END=0x64200000
+  
+#
+# Individual subsystems can be enabled:
+#
+# AHB1:
+CONFIG_STM32_CRC=n
+CONFIG_STM32_BKPSRAM=n
+CONFIG_STM32_CCMDATARAM=n
+CONFIG_STM32_DMA1=n
+CONFIG_STM32_DMA2=n
+CONFIG_STM32_ETHMAC=y
+CONFIG_STM32_OTGHS=n
+# AHB2:
+CONFIG_STM32_DCMI=n
+CONFIG_STM32_CRYP=n
+CONFIG_STM32_HASH=n
+CONFIG_STM32_RNG=n
+CONFIG_STM32_OTGFS=n
+# AHB3:
+CONFIG_STM32_FSMC=n
+# APB1:
+CONFIG_STM32_TIM2=n
+CONFIG_STM32_TIM3=n
+CONFIG_STM32_TIM4=n
+CONFIG_STM32_TIM5=n
+CONFIG_STM32_TIM6=n
+CONFIG_STM32_TIM7=n
+CONFIG_STM32_TIM12=n
+CONFIG_STM32_TIM13=n
+CONFIG_STM32_TIM14=n
+CONFIG_STM32_WWDG=n
+CONFIG_STM32_IWDG=n
+CONFIG_STM32_SPI2=n
+CONFIG_STM32_SPI3=n
+CONFIG_STM32_USART2=n
+CONFIG_STM32_USART3=y
+CONFIG_STM32_UART4=n
+CONFIG_STM32_UART5=n
+CONFIG_STM32_I2C1=y
+CONFIG_STM32_I2C2=n
+CONFIG_STM32_I2C3=n
+CONFIG_STM32_CAN1=n
+CONFIG_STM32_CAN2=n
+CONFIG_STM32_DAC=n
+CONFIG_STM32_PWR=y
+# APB2:
+CONFIG_STM32_TIM1=n
+CONFIG_STM32_TIM8=n
+CONFIG_STM32_USART1=n
+CONFIG_STM32_USART6=n
+CONFIG_STM32_ADC1=n
+CONFIG_STM32_ADC2=n
+CONFIG_STM32_ADC3=n
+CONFIG_STM32_SDIO=n
+CONFIG_STM32_SPI1=n
+CONFIG_STM32_SYSCFG=y
+CONFIG_STM32_TIM9=n
+CONFIG_STM32_TIM10=n
+CONFIG_STM32_TIM11=n
+
+#
+# STM32F40xxx specific serial device driver settings
+#
+CONFIG_USART1_SERIAL_CONSOLE=n
+CONFIG_USART2_SERIAL_CONSOLE=n
+CONFIG_USART3_SERIAL_CONSOLE=y
+CONFIG_USART4_SERIAL_CONSOLE=n
+CONFIG_USART5_SERIAL_CONSOLE=n
+
+CONFIG_USART1_TXBUFSIZE=128
+CONFIG_USART2_TXBUFSIZE=128
+CONFIG_USART3_TXBUFSIZE=128
+CONFIG_USART4_TXBUFSIZE=128
+CONFIG_USART5_TXBUFSIZE=128
+
+CONFIG_USART1_RXBUFSIZE=128
+CONFIG_USART2_RXBUFSIZE=128
+CONFIG_USART3_RXBUFSIZE=128
+CONFIG_USART4_RXBUFSIZE=128
+CONFIG_USART5_RXBUFSIZE=128
+
+CONFIG_USART1_BAUD=115200
+CONFIG_USART2_BAUD=115200
+CONFIG_USART3_BAUD=115200
+CONFIG_USART4_BAUD=115200
+CONFIG_USART5_BAUD=115200
+
+CONFIG_USART1_BITS=8
+CONFIG_USART2_BITS=8
+CONFIG_USART3_BITS=8
+CONFIG_USART4_BITS=8
+CONFIG_USART5_BITS=8
+
+CONFIG_USART1_PARITY=0
+CONFIG_USART2_PARITY=0
+CONFIG_USART3_PARITY=0
+CONFIG_USART4_PARITY=0
+CONFIG_USART5_PARITY=0
+
+CONFIG_USART1_2STOP=0
+CONFIG_USART2_2STOP=0
+CONFIG_USART3_2STOP=0
+CONFIG_USART4_2STOP=0
+CONFIG_USART5_2STOP=0
+
+#
+# STM32F40xxx specific SSI device driver settings
+#
+CONFIG_SSI0_DISABLE=n
+CONFIG_SSI1_DISABLE=y
+CONFIG_SSI_POLLWAIT=y
+#CONFIG_SSI_TXLIMIT=4
+
+#
+# STM32F40xxx specific CAN device driver settings
+#
+CONFIG_CAN=n
+CONFIG_CAN_EXTID=n
+#CONFIG_CAN_FIFOSIZE
+#CONFIG_CAN_NPENDINGRTR
+CONFIG_CAN_LOOPBACK=n
+CONFIG_CAN1_BAUD=700000
+CONFIG_CAN2_BAUD=700000
+
+#
+# STM32F40xxx Ethernet device driver settings
+#
+CONFIG_STM32_PHYADDR=0x01
+CONFIG_STM32_MII=y
+CONFIG_STM32_MII_MCO1=y
+CONFIG_STM32_MII_MCO2=n
+CONFIG_STM32_RMII=n
+CONFIG_STM32_AUTONEG=y
+#CONFIG_STM32_ETHFD
+#CONFIG_STM32_ETH100MB
+CONFIG_STM32_PHYSR=16
+CONFIG_STM32_PHYSR_SPEED=0x0002
+CONFIG_STM32_PHYSR_100MBPS=0x0000
+CONFIG_STM32_PHYSR_MODE=0x0004
+CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004
+CONFIG_STM32_ETH_PTP=n
+CONFIG_STM32_ETHMAC_REGDEBUG=n
+
+#
+# I2C configuration
+#
+CONFIG_I2C=y
+CONFIG_I2C_POLLED=y
+CONFIG_I2C_TRANSFER=y
+CONFIG_I2C_TRACE=n
+
+#
+# ADC configuration
+#
+# Enable ADC driver support.  The STM3240G-EVAL has a 10 Kohm potentiometer
+# RV1 connected to PF9 of STM32F407IGH6 on the board: TIM14_CH1/ SMC_CD/ADC3_IN7
+#
+CONFIG_ADC=n
+#CONFIG_STM32_TIM1_ADC=y
+CONFIG_STM32_TIM1_ADC3=y
+CONFIG_STM32_ADC3_SAMPLE_FREQUENCY=100
+
+#
+# PWM configuration
+#
+# The STM3240G-Eval has no real on-board PWM devices, but the board can be configured to output
+# a pulse train using several options (see board.h).  Here the default setup is for TIM8, CH4.
+# Don't forget to enable CONFIG_PWM and CONFIG_STM32_TIM8.
+#
+CONFIG_PWM=n
+CONFIG_PWM_PULSECOUNT=y
+CONFIG_STM32_TIM8_PWM=y
+CONFIG_STM32_TIM8_CHANNEL=4
+
+#
+# General build options
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=n
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=y
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+CONFIG_USER_ENTRYPOINT="uip_main"
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=n
+CONFIG_DEBUG_FS=n
+CONFIG_DEBUG_GRAPHICS=n
+CONFIG_DEBUG_LCD=n
+CONFIG_DEBUG_USB=n
+CONFIG_DEBUG_NET=n
+CONFIG_DEBUG_RTC=n
+CONFIG_DEBUG_ANALOG=n
+CONFIG_DEBUG_PWM=n
+CONFIG_DEBUG_CAN=n
+CONFIG_DEBUG_I2C=n
+CONFIG_DEBUG_INPUT=n
+
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_MM_REGIONS=2
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2011
+CONFIG_START_MONTH=12
+CONFIG_START_DAY=6
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=n
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=192
+CONFIG_SCHED_WORKPERIOD=50000
+CONFIG_SCHED_WORKSTACKSIZE=2048
+CONFIG_SIG_SIGWORK=4
+CONFIG_SCHED_WAITPID=y
+CONFIG_SCHED_ATEXIT=n
+
+#
+# System Logging
+#
+
+CONFIG_SYSLOG=n
+CONFIG_RAMLOG=n
+CONFIG_RAMLOG_CONSOLE=n
+CONFIG_RAMLOG_SYSLOG=n
+#CONFIG_RAMLOG_NPOLLWAITERS
+#CONFIG_RAMLOG_CONSOLE_BUFSIZE
+
+#
+# Settings for NXFLAT
+#
+CONFIG_NXFLAT=n
+CONFIG_NXFLAT_DUMPBUFFER=n
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=n
+CONFIG_DISABLE_ENVIRON=n
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=8
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Framebuffer driver options
+#
+CONFIG_FB_CMAP=n
+CONFIG_FB_HWCURSOR=n
+CONFIG_FB_HWCURSORIMAGE=n
+#CONFIG_FB_HWCURSORSIZE
+#CONFIG_FB_TRANSPARENCY
+
+#
+# Filesystem configuration
+#
+CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
+CONFIG_FS_ROMFS=n
+
+#
+# SPI-based MMC/SD driver
+#
+CONFIG_MMCSD_NSLOTS=1
+CONFIG_MMCSD_READONLY=n
+CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# Block driver buffering
+#
+CONFIG_FS_READAHEAD=n
+CONFIG_FS_WRITEBUFFER=n
+
+#
+# STM32 SDIO-based MMC/SD driver
+#
+CONFIG_SDIO_DMA=n
+#CONFIG_SDIO_PRI=128
+#CONFIG_SDIO_DMAPRIO
+#CONFIG_SDIO_WIDTH_D1_ONLY
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
+CONFIG_MMCSD_MMCSUPPORT=n
+CONFIG_MMCSD_HAVECARDDETECT=n
+
+#
+# TCP/IP and UDP support via uIP
+#
+CONFIG_NET=y
+CONFIG_NET_NOINTS=n
+CONFIG_NET_MULTIBUFFER=y
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=10
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=562
+CONFIG_NET_TCP=y
+CONFIG_NET_TCP_CONNS=40
+#CONFIG_NET_TCP_READAHEAD_BUFSIZE
+CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
+CONFIG_NET_TCPBACKLOG=y
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=y
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=y
+CONFIG_NET_ICMP_PING=y
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_ARP_IPIN=n
+CONFIG_NET_MULTICAST=n
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+#
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# FTP Server
+#
+CONFIG_FTPD_CMDBUFFERSIZE=2048
+
+#
+# RTC Configuration
+#
+CONFIG_RTC=y
+CONFIG_RTC_DATETIME=y
+CONFIG_RTC_HIRES=n
+CONFIG_RTC_FREQUENCY=n
+CONFIG_RTC_ALARM=n
+
+#
+# Input device configuration
+#
+CONFIG_INPUT=n
+CONFIG_INPUT_TSC2007=n
+
+#
+# STMPE811 input device configuration
+#
+# Prerequisites:  CONFIG_INPUT=y
+# Other settings that effect the driver: CONFIG_DISABLE_POLL
+#
+CONFIG_INPUT_STMPE811=n
+CONFIG_STMPE811_SPI=n
+CONFIG_STMPE811_I2C=y
+CONFIG_STMPE811_MULTIPLE=y
+CONFIG_STMPE811_ACTIVELOW=y
+CONFIG_STMPE811_EDGE=y
+#CONFIG_STMPE811_NPOLLWAITERS
+CONFIG_STMPE811_TSC_DISABLE=n
+CONFIG_STMPE811_ADC_DISABLE=y
+CONFIG_STMPE811_GPIO_DISABLE=y
+CONFIG_STMPE811_GPIOINT_DISABLE=y
+CONFIG_STMPE811_SWAPXY=y
+CONFIG_STMPE811_TEMP_DISABLE=y
+CONFIG_STMPE811_REGDEBUG=n
+CONFIG_STMPE811_THRESHX=26
+CONFIG_STMPE811_THRESHY=34
+
+#
+# STM32 USB OTG FS Device Configuration
+#
+CONFIG_USBDEV=n
+CONFIG_USBDEV_ISOCHRONOUS=n
+CONFIG_USBDEV_DUALSPEED=n
+CONFIG_USBDEV_SELFPOWERED=y
+CONFIG_USBDEV_REMOTEWAKEUP=n
+CONFIG_USBDEV_MAXPOWER=100
+CONFIG_USBDEV_TRACE=n
+CONFIG_USBDEV_TRACE_NRECORDS=128
+
+#
+# STM32 USB OTG FS Host Configuration
+#
+CONFIG_USBHOST=n
+#CONFIG_STM32_OTGFS_RXFIFO_SIZE
+#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE
+#CONFIG_STM32_OTGFS_PTXFIFO_SIZE
+#CONFIG_STM32_OTGFS_DESCSIZE
+CONFIG_STM32_OTGFS_SOFINTR=n
+CONFIG_STM32_USBHOST_REGDEBUG=n
+CONFIG_STM32_USBHOST_PKTDUMP=n
+
+#
+# USB Serial Device Configuration
+#
+CONFIG_PL2303=n
+CONFIG_PL2303_EPINTIN=1
+CONFIG_PL2303_EPBULKOUT=2
+CONFIG_PL2303_EPBULKIN=3
+CONFIG_PL2303_NWRREQS=4
+CONFIG_PL2303_NRDREQS=4
+CONFIG_PL2303_VENDORID=0x067b
+CONFIG_PL2303_PRODUCTID=0x2303
+CONFIG_PL2303_VENDORSTR="Nuttx"
+CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
+CONFIG_PL2303_RXBUFSIZE=512
+CONFIG_PL2303_TXBUFSIZE=512
+
+#
+# USB Storage Device Configuration
+#
+CONFIG_USBMSC=n
+CONFIG_USBMSC_EP0MAXPACKET=64
+CONFIG_USBMSC_EPBULKOUT=2
+CONFIG_USBMSC_EPBULKIN=5
+CONFIG_USBMSC_NRDREQS=2
+CONFIG_USBMSC_NWRREQS=2
+CONFIG_USBMSC_BULKINREQLEN=256
+CONFIG_USBMSC_BULKOUTREQLEN=256
+CONFIG_USBMSC_VENDORID=0x584e
+CONFIG_USBMSC_VENDORSTR="NuttX"
+CONFIG_USBMSC_PRODUCTID=0x5342
+CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
+CONFIG_USBMSC_VERSIONNO=0x0399
+CONFIG_USBMSC_REMOVABLE=y
+
+#
+# Graphics related configuration settings
+#
+CONFIG_NX=n
+CONFIG_NX_MULTIUSER=n
+CONFIG_NX_NPLANES=1
+CONFIG_NX_DISABLE_1BPP=y
+CONFIG_NX_DISABLE_2BPP=y
+CONFIG_NX_DISABLE_4BPP=y
+CONFIG_NX_DISABLE_8BPP=y
+CONFIG_NX_DISABLE_16BPP=n
+CONFIG_NX_DISABLE_24BPP=y
+CONFIG_NX_DISABLE_32BPP=y
+CONFIG_NX_PACKEDMSFIRST=n
+CONFIG_NX_LCDDRIVER=y
+CONFIG_LCD_MAXPOWER=1
+CONFIG_LCD_MAXCONTRAST=1
+CONFIG_NX_MOUSE=y
+CONFIG_NX_KBD=y
+#CONFIG_NXTK_BORDERWIDTH=4
+CONFIG_NXTK_BORDERCOLOR1=0xd69a
+CONFIG_NXTK_BORDERCOLOR2=0xad55
+CONFIG_NXTK_AUTORAISE=n
+CONFIG_NXFONT_SANS17X22=y
+CONFIG_NXFONT_SANS20X26=n
+CONFIG_NXFONT_SANS22X29=n
+CONFIG_NXFONT_SANS23X27=n
+CONFIG_NXFONT_SANS28X37=n
+CONFIG_NXFONT_SANS17X23B=n
+CONFIG_NXFONT_SANS20X27B=y
+CONFIG_NXFONT_SANS22X29B=y
+CONFIG_NXFONT_SANS28X37B=n
+CONFIG_NXFONT_SANS40X49B=n
+CONFIG_NXFONT_SERIF22X29=n
+CONFIG_NXFONT_SERIF29X37=n
+CONFIG_NXFONT_SERIF38X48=n
+CONFIG_NXFONT_SERIF22X28B=n
+CONFIG_NXFONT_SERIF27X38B=n
+CONFIG_NXFONT_SERIF38X49B=n
+CONFIG_NXFONTS_CHARBITS=7
+CONFIG_NX_BLOCKING=y
+CONFIG_NX_MXSERVERMSGS=32
+CONFIG_NX_MXCLIENTMSGS=16
+
+#
+# NxConsole Configuration Settings:
+#
+CONFIG_NXCONSOLE=n
+CONFIG_NXCONSOLE_BPP=16
+CONFIG_NXCONSOLE_MXCHARS=256
+CONFIG_NXCONSOLE_CACHESIZE=32
+#
+
+#
+# STM3240G-EVAL LCD Hardware Configuration
+#
+CONFIG_LCD_NOGETRUN=y
+CONFIG_LCD_LANDSCAPE=n
+CONFIG_LCD_RLANDSCAPE=n
+CONFIG_LCD_PORTRAIT=n
+CONFIG_LCD_RPORTRAIT=y
+
+#
+# STM3240G-EVAL specific LCD settings
+#
+CONFIG_STM32_ILI9320_DISABLE=n
+CONFIG_STM32_ILI9325_DISABLE=n
+
+#
+# Settings for examples/uip
+#
+CONFIG_EXAMPLE_UIP_IPADDR=0xc0a80232
+CONFIG_EXAMPLE_UIP_DRIPADDR=0xc0a80201
+CONFIG_EXAMPLE_UIP_NETMASK=0xffffff00
+CONFIG_EXAMPLE_UIP_NOMAC=y
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=y
+CONFIG_EXAMPLE_NETTEST_IPADDR=0x0a000002
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=0x0a000001
+CONFIG_EXAMPLE_NETTEST_NETMASK=0xffffff00
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=0x0a000001
+
+#
+# Settings for examples/ostest
+#
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+
+#
+# Settings for apps/nshlib
+#
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_STRERROR=n
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_NESTDEPTH=3
+CONFIG_NSH_DISABLESCRIPT=n
+CONFIG_NSH_DISABLEBG=n
+CONFIG_NSH_ROMFSETC=n
+CONFIG_NSH_CONSOLE=y
+CONFIG_NSH_TELNET=y
+CONFIG_NSH_ARCHINIT=n
+CONFIG_NSH_IOBUFFER_SIZE=512
+CONFIG_NSH_DHCPC=n
+CONFIG_NSH_NOMAC=y
+CONFIG_NSH_IPADDR=0x0a000002
+CONFIG_NSH_DRIPADDR=0x0a000001
+CONFIG_NSH_NETMASK=0xffffff00
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=0
+CONFIG_NSH_ROMFSSECTSIZE=64
+CONFIG_NSH_FATDEVNO=1
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT=/tmp
+
+#
+# Architecture-specific NSH options
+#
+CONFIG_NSH_MMCSDSPIPORTNO=0
+CONFIG_NSH_MMCSDSLOTNO=0
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# I2C tool settings
+#
+CONFIG_I2CTOOL_BUILTIN=y
+CONFIG_I2CTOOL_MINBUS=1
+CONFIG_I2CTOOL_MAXBUS=3
+#CONFIG_I2CTOOL_MINADDR
+#CONFIG_I2CTOOL_MAXADDR
+#CONFIG_I2CTOOL_MAXREGADDR
+CONFIG_I2CTOOL_DEFFREQ=100000
+
+#
+# Settings for examples/usbserial
+#
+CONFIG_EXAMPLES_USBSERIAL_INONLY=n
+CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+
+CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+
+#
+# Settings for examples/adc
+#
+
+#
+# Settings for examples/can
+#
+
+#
+# Settings for examples/nx
+#
+CONFIG_EXAMPLES_NX_BUILTIN=y
+CONFIG_EXAMPLES_NX_VPLANE=0
+CONFIG_EXAMPLES_NX_DEVNO=0
+CONFIG_EXAMPLES_NX_BGCOLOR=0x0011
+CONFIG_EXAMPLES_NX_COLOR1=0xaedc
+CONFIG_EXAMPLES_NX_COLOR2=0xe7ff
+CONFIG_EXAMPLES_NX_TBCOLOR=0xd69a
+CONFIG_EXAMPLES_NX_FONTID=0
+CONFIG_EXAMPLES_NX_FONTCOLOR=0x0000
+CONFIG_EXAMPLES_NX_BPP=16
+CONFIG_EXAMPLES_NX_RAWWINDOWS=n
+CONFIG_EXAMPLES_NX_STACKSIZE=2048
+CONFIG_EXAMPLES_NX_CLIENTPRIO=80
+CONFIG_EXAMPLES_NX_SERVERPRIO=120
+CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4
+CONFIG_EXAMPLES_NX_EXTERNINIT=n
+
+#
+# Settings for examples/nxhello
+#
+CONFIG_EXAMPLES_NXHELLO_BUILTIN=y
+CONFIG_EXAMPLES_NXHELLO_VPLANE=0
+CONFIG_EXAMPLES_NXHELLO_DEVNO=0
+CONFIG_EXAMPLES_NXHELLO_BGCOLOR=0x0011
+CONFIG_EXAMPLES_NXHELLO_FONTID=6
+CONFIG_EXAMPLES_NXHELLO_FONTCOLOR=0xffdf
+CONFIG_EXAMPLES_NXHELLO_BPP=16
+CONFIG_EXAMPLES_NXHELLO_EXTERNINIT=n
+
+#
+# Settings for examples/nximage
+#
+CONFIG_EXAMPLES_NXIMAGE_BUILTIN=y
+CONFIG_EXAMPLES_NXIMAGE_VPLANE=0
+CONFIG_EXAMPLES_NXIMAGE_DEVNO=0
+CONFIG_EXAMPLES_NXIMAGE_BPP=16
+CONFIG_EXAMPLES_NXIMAGE_XSCALEp5=n
+CONFIG_EXAMPLES_NXIMAGE_XSCALE1p5=y
+CONFIG_EXAMPLES_NXIMAGE_XSCALE2p0=n
+CONFIG_EXAMPLES_NXIMAGE_YSCALEp5=n
+CONFIG_EXAMPLES_NXIMAGE_YSCALE1p5=y
+CONFIG_EXAMPLES_NXIMAGE_YSCALE2p0=n
+CONFIG_EXAMPLES_NXIMAGE_EXTERNINIT=n
+
+#
+# Settings for examples/nxlines
+#
+CONFIG_EXAMPLES_NXLINES_BUILTIN=n
+CONFIG_EXAMPLES_NXLINES_VPLANE=0
+CONFIG_EXAMPLES_NXLINES_DEVNO=0
+CONFIG_EXAMPLES_NXLINES_BGCOLOR=0x0320
+CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16
+CONFIG_EXAMPLES_NXLINES_LINECOLOR=0xffe0
+CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=4
+CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0xffe0
+CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0xf7bb
+CONFIG_EXAMPLES_NXLINES_BPP=16
+CONFIG_EXAMPLES_NXLINES_EXTERNINIT=n
+
+#
+# Settings for examples/touchscreen
+#
+CONFIG_EXAMPLES_TOUCHSCREEN_BUILTIN=y
+CONFIG_EXAMPLES_TOUCHSCREEN_MINOR=0
+CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH="/dev/input0"
+CONFIG_EXAMPLES_TOUCHSCREEN_NSAMPLES=25
+
+#
+# Settings for examples/usbstorage
+#
+CONFIG_EXAMPLES_USBMSC_BUILTIN=y
+CONFIG_EXAMPLES_USBMSC_NLUNS=1
+CONFIG_EXAMPLES_USBMSC_DEVMINOR1=0
+CONFIG_EXAMPLES_USBMSC_DEVPATH1="/dev/mmcsd0"
+CONFIG_EXAMPLES_USBMSC_DEBUGMM=n
+CONFIG_EXAMPLES_USBMSC_TRACEINIT=n
+CONFIG_EXAMPLES_USBMSC_TRACECLASS=n
+CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS=n
+
+#
+# Settings for examples/watchdog
+#
+# This test depends on these specific Watchdog/NSH configurations settings (your
+# specific watchdog hardware settings might require additional settings).
+#
+
+#
+# Settings for examples/pwm
+#
+
+#
+# Settings for examples/ftpd
+#
+
+#
+# Stack and heap information
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+#CONFIG_STACK_POINTER
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=