STM3240G-EVAL: Add kernel build mode support and an NxWM kernel mode configuration

14 files changed, 3292 insertions, 677 deletions

diff --git a/nuttx/configs/stm3240g-eval/README.txt b/nuttx/configs/stm3240g-eval/README.txt
index 8be784a73..4051cf7a1 100644
--- a/nuttx/configs/stm3240g-eval/README.txt
+++ b/nuttx/configs/stm3240g-eval/README.txt
@@ -242,7 +242,7 @@ NXFLAT Toolchain
   tools -- just the NXFLAT tools.  The buildroot with the NXFLAT tools can
   be downloaded from the NuttX SourceForge download site
   (https://sourceforge.net/projects/nuttx/files/).
- 
+
   This GNU toolchain builds and executes in the Linux or Cygwin environment.
 
   1. You must have already configured Nuttx in <some-dir>/nuttx.
@@ -887,14 +887,14 @@ STM3240G-EVAL-specific Configuration Options
   STM32 USB OTG FS Host Driver Support
 
   Pre-requisites
- 
+
    CONFIG_USBHOST         - Enable USB host support
    CONFIG_STM32_OTGFS     - Enable the STM32 USB OTG FS block
    CONFIG_STM32_SYSCFG    - Needed
    CONFIG_SCHED_WORKQUEUE - Worker thread support is required
- 
+
   Options:
- 
+
    CONFIG_STM32_OTGFS_RXFIFO_SIZE - Size of the RX FIFO in 32-bit words.
      Default 128 (512 bytes)
    CONFIG_STM32_OTGFS_NPTXFIFO_SIZE - Size of the non-periodic Tx FIFO
@@ -955,6 +955,99 @@ Where <subdir> is one of the following:
     control the configuration.  See the section entitled "NuttX Configuration
     Tool" in the top-level README.txt file.
 
+  knxwm:
+  -----
+    [WARNING:  This is a work in progress].
+
+    This is identical to the nxwm configuration below except that NuttX
+    is built as a kernel-mode, monolithic module and the user applications
+    are built separately.  Is is recommended to use a special make command;
+    not just 'make' but make with the following two arguments:
+
+        make pass1 pass2
+
+    In the normal case (just 'make'), make will attempt to build both user-
+    and kernel-mode blobs more or less interleaved.  This actual works!
+    However, for me it is very confusing so I prefer the above make command:
+    Make the user-space binaries first (pass1), then make the kernel-space
+    binaries (pass2)
+
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. This is the default platform/toolchain in the configuration:
+
+       CONFIG_HOST_WINDOWS=y                   : Windows
+       CONFIG_WINDOWS_CYGWIN=y                 : Cygwin environment on Windows
+       CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery under Windows
+
+       This is easily changed by modifying the configuration.
+
+    3. At the end of the build, there will be several files in the top-level
+       NuttX build directory:
+
+       PASS1:
+         nuttx_user.elf    - The pass1 user-space ELF file
+         nuttx_user.hex    - The pass1 Intel HEX format file (selected in defconfig)
+         User.map          - Symbols in the user-space ELF file
+
+       PASS2:
+         nuttx             - The pass2 kernel-space ELF file
+         nuttx.hex         - The pass2 Intel HEX file (selected in defconfig)
+         System.map        - Symbols in the kernel-space ELF file
+
+    4. Combining .hex files.  If you plan to use the STM32 ST-Link Utility to
+       load the .hex files into FLASH, then you need to combine the two hex
+       files into a single .hex file.  Here is how you can do that.
+
+       a. The 'tail' of the nuttx.hex file should look something like this
+          (with my comments added):
+
+            $ tail nuttx.hex
+            # 00, data records
+            ...
+            :10 9DC0 00 01000000000800006400020100001F0004
+            :10 9DD0 00 3B005A0078009700B500D400F300110151
+            :08 9DE0 00 30014E016D0100008D
+            # 05, Start Linear Address Record
+            :04 0000 05 0800 0419 D2
+            # 01, End Of File record
+            :00 0000 01 FF
+
+          Use an editor such as vi to remove the 05 and 01 records.
+
+       b. The 'head' of the nuttx_user.hex file should look something like
+          this (again with my comments added):
+
+            $ head nuttx_user.hex
+            # 04, Extended Linear Address Record
+            :02 0000 04 0801 F1
+            # 00, data records
+            :10 8000 00 BD89 01084C800108C8110208D01102087E
+            :10 8010 00 0010 00201C1000201C1000203C16002026
+            :10 8020 00 4D80 01085D80010869800108ED83010829
+            ...
+
+          Nothing needs to be done here.  The nuttx_user.hex file should
+          be fine.
+
+       c. Combine the edited nuttx.hex and un-edited nuttx_user.hex
+          file to produce a single combined hex file:
+
+          $ cat nuttx.hex nuttx_user.hex >combined.hex
+
+       Then use the combined.hex file with the STM32 ST-Link tool.  If
+       you do this a lot, you will probably want to invest a little time
+       to develop a tool to automate these steps.
+
   nettest:
   -------
 
@@ -1097,7 +1190,7 @@ Where <subdir> is one of the following:
        CONFIG_MM_REGIONS=3                  : When FSMC is enabled, so is the on-board SRAM memory region
 
     8. USB OTG FS Device or Host Support
- 
+
        CONFIG_USBDEV          - Enable USB device support, OR
        CONFIG_USBHOST         - Enable USB host support
        CONFIG_STM32_OTGFS     - Enable the STM32 USB OTG FS block
@@ -1168,7 +1261,7 @@ Where <subdir> is one of the following:
 
         -CONFIG_STM32_RNG=y
         +CONFIG_STM32_RNG=n
- 
+
         -CONFIG_DEV_RANDOM=y
         +CONFIG_DEV_RANDOM=n
 
diff --git a/nuttx/configs/stm3240g-eval/kernel/.gitignore b/nuttx/configs/stm3240g-eval/kernel/.gitignore
new file mode 100644
index 000000000..7bacd5aee
--- /dev/null
+++ b/nuttx/configs/stm3240g-eval/kernel/.gitignore
@@ -0,0 +1,2 @@
+/nuttx_user.elf
+
diff --git a/nuttx/configs/stm3240g-eval/kernel/Makefile b/nuttx/configs/stm3240g-eval/kernel/Makefile
new file mode 100644
index 000000000..327035336
--- /dev/null
+++ b/nuttx/configs/stm3240g-eval/kernel/Makefile
@@ -0,0 +1,122 @@
+############################################################################
+# configs/stm3240g-eval/kernel/Makefile
+#
+#   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+# This is the directory for the board-specific header files
+
+BOARD_INCLUDE = $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)include
+
+# The entry point name (if none is provided in the .config file)
+
+CONFIG_USER_ENTRYPOINT ?= user_start
+ENTRYPT = $(patsubst "%",%,$(CONFIG_USER_ENTRYPOINT))
+
+# Get the paths to the libraries and the links script path in format that
+# is appropriate for the host OS
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  USER_LIBPATHS = ${shell for path in $(USERLIBS); do dir=`dirname $(TOPDIR)$(DELIM)$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
+  USER_LDSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}"
+  USER_LDSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld}"
+  USER_HEXFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.hex}"
+  USER_SRECFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.srec}"
+  USER_BINFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.bin}"
+else
+  # Linux/Cygwin-native toolchain 
+  USER_LIBPATHS = $(addprefix -L$(TOPDIR)$(DELIM),$(dir $(USERLIBS)))
+  USER_LDSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
+  USER_LDSCRIPT += -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld
+  USER_HEXFILE += "$(TOPDIR)$(DELIM)nuttx_user.hex"
+  USER_SRECFILE += "$(TOPDIR)$(DELIM)nuttx_user.srec"
+  USER_BINFILE += "$(TOPDIR)$(DELIM)nuttx_user.bin"
+endif
+
+USER_LDFLAGS = --undefined=$(ENTRYPT) --entry=$(ENTRYPT) $(USER_LDSCRIPT)
+USER_LDLIBS = $(patsubst lib%,-l%,$(basename $(notdir $(USERLIBS))))
+USER_LIBGCC = "${shell $(CC) -print-libgcc-file-name}"
+
+# Source files
+
+CSRCS = up_userspace.c
+COBJS = $(CSRCS:.c=$(OBJEXT))
+OBJS  = $(COBJS)
+
+# Targets:
+
+all: $(TOPDIR)$(DELIM)nuttx_user.elf $(TOPDIR)$(DELIM)User.map
+.PHONY: nuttx_user.elf depend clean distclean
+
+$(COBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+# Create the nuttx_user.elf file containing all of the user-mode code
+
+nuttx_user.elf: $(OBJS)
+	$(Q) $(LD) -o $@ $(USER_LDFLAGS) $(USER_LIBPATHS) $(OBJS) --start-group $(USER_LDLIBS) --end-group $(USER_LIBGCC) 
+
+$(TOPDIR)$(DELIM)nuttx_user.elf: nuttx_user.elf
+	@echo "LD: nuttx_user.elf"
+	$(Q) cp -a nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.elf
+ifeq ($(CONFIG_INTELHEX_BINARY),y)
+	@echo "CP: nuttx_user.hex"
+	$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O ihex nuttx_user.elf $(USER_HEXFILE)
+endif
+ifeq ($(CONFIG_MOTOROLA_SREC),y)
+	@echo "CP: nuttx_user.srec"
+	$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O srec nuttx_user.elf $(USER_SRECFILE)
+endif
+ifeq ($(CONFIG_RAW_BINARY),y)
+	@echo "CP: nuttx_user.bin"
+	$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary nuttx_user.elf $(USER_BINFILE)
+endif
+
+$(TOPDIR)$(DELIM)User.map: nuttx_user.elf
+	@echo "MK: User.map"
+	$(Q) $(NM) nuttx_user.elf >$(TOPDIR)$(DELIM)User.map
+	$(Q) $(CROSSDEV)size nuttx_user.elf
+
+.depend:
+
+depend: .depend
+
+clean:
+	$(call DELFILE, nuttx_user.elf)
+	$(call DELFILE, "$(TOPDIR)$(DELIM)nuttx_user.*")
+	$(call DELFILE, "$(TOPDIR)$(DELIM)User.map")
+	$(call CLEAN)
+
+distclean: clean
diff --git a/nuttx/configs/stm3240g-eval/kernel/up_userspace.c b/nuttx/configs/stm3240g-eval/kernel/up_userspace.c
new file mode 100644
index 000000000..4fe12a907
--- /dev/null
+++ b/nuttx/configs/stm3240g-eval/kernel/up_userspace.c
@@ -0,0 +1,142 @@
+/****************************************************************************
+ * configs/stm3240g-eval/kernel/up_userspace.c
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdlib.h>
+
+#include <nuttx/userspace.h>
+#include <nuttx/wqueue.h>
+#include <nuttx/mm.h>
+
+#if defined(CONFIG_NUTTX_KERNEL) && !defined(__KERNEL__)
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+/* Configuration ************************************************************/
+
+#ifndef CONFIG_NUTTX_USERSPACE
+#  error "CONFIG_NUTTX_USERSPACE not defined"
+#endif
+
+#if CONFIG_NUTTX_USERSPACE != 0x08020000
+#  error "CONFIG_NUTTX_USERSPACE must be 0x08020000 to match memory.ld"
+#endif
+
+/****************************************************************************
+ * Public Data
+ ****************************************************************************/
+
+/* These 'addresses' of these values are setup by the linker script.  They are
+ * not actual uint32_t storage locations! They are only used meaningfully in the
+ * following way:
+ *
+ *  - The linker script defines, for example, the symbol_sdata.
+ *  - The declareion extern uint32_t _sdata; makes C happy.  C will believe
+ *    that the value _sdata is the address of a uint32_t variable _data (it is
+ *    not!).
+ *  - We can recoved the linker value then by simply taking the address of
+ *    of _data.  like:  uint32_t *pdata = &_sdata;
+ */
+
+extern uint32_t _stext;           /* Start of .text */
+extern uint32_t _etext;           /* End_1 of .text + .rodata */
+extern const uint32_t _eronly;    /* End+1 of read only section (.text + .rodata) */
+extern uint32_t _sdata;           /* Start of .data */
+extern uint32_t _edata;           /* End+1 of .data */
+extern uint32_t _sbss;            /* Start of .bss */
+extern uint32_t _ebss;            /* End+1 of .bss */
+
+/* This is the user space entry point */
+
+int CONFIG_USER_ENTRYPOINT(int argc, char *argv[]);
+
+const struct userspace_s userspace __attribute__ ((section (".userspace"))) = 
+{
+  /* General memory map */
+
+  .us_entrypoint    = (main_t)CONFIG_USER_ENTRYPOINT,
+  .us_textstart     = (uintptr_t)&_stext,
+  .us_textend       = (uintptr_t)&_etext,
+  .us_datasource    = (uintptr_t)&_eronly,
+  .us_datastart     = (uintptr_t)&_sdata,
+  .us_dataend       = (uintptr_t)&_edata,
+  .us_bssstart      = (uintptr_t)&_sbss,
+  .us_bssend        = (uintptr_t)&_ebss,
+
+  /* Task/thread startup routines */
+
+  .task_startup     = task_startup,
+#ifndef CONFIG_DISABLE_PTHREAD
+  .pthread_startup  = pthread_startup,
+#endif
+
+  /* Signal handler trampoline */
+
+#ifndef CONFIG_DISABLE_SIGNALS
+  .signal_handler   = up_signal_handler,
+#endif
+
+  /* Memory manager entry points (declared in include/nuttx/mm.h) */
+
+  .mm_initialize    = umm_initialize,
+  .mm_addregion     = umm_addregion,
+  .mm_trysemaphore  = umm_trysemaphore,
+  .mm_givesemaphore = umm_givesemaphore,
+
+  /* Memory manager entry points (declared in include/stdlib.h) */
+
+  .mm_malloc        = malloc,
+  .mm_realloc       = realloc,
+  .mm_zalloc        = zalloc,
+  .mm_free          = free,
+
+  /* User-space work queue support (declared in include/nuttx/wqueue.h) */
+
+#if defined(CONFIG_SCHED_WORKQUEUE) && defined(CONFIG_SCHED_USRWORK)
+  .work_usrstart    = work_usrstart,
+#endif
+};
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+#endif /* CONFIG_NUTTX_KERNEL && !__KERNEL__ */
diff --git a/nuttx/configs/stm3240g-eval/knxwm/Make.defs b/nuttx/configs/stm3240g-eval/knxwm/Make.defs
new file mode 100644
index 000000000..c35bb696a
--- /dev/null
+++ b/nuttx/configs/stm3240g-eval/knxwm/Make.defs
@@ -0,0 +1,113 @@
+############################################################################
+# configs/stm3240g-eval/knxwm/Make.defs
+#
+#   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}"
+  ARCHSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel-space.ld}"
+  MAXOPTIMIZATION = -O2
+else
+  # Linux/Cygwin-native toolchain
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
+  ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
+  ARCHSCRIPT += -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel-space.ld
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/stm3240g-eval/knxwm/defconfig b/nuttx/configs/stm3240g-eval/knxwm/defconfig
new file mode 100644
index 000000000..59788142e
--- /dev/null
+++ b/nuttx/configs/stm3240g-eval/knxwm/defconfig
@@ -0,0 +1,1322 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+CONFIG_BUILD_2PASS=y
+CONFIG_PASS1_TARGET="all"
+CONFIG_PASS1_BUILDIR="configs/stm3240g-eval/kernel"
+CONFIG_PASS1_OBJECT=""
+CONFIG_NUTTX_KERNEL=y
+CONFIG_NUTTX_USERSPACE=0x08020000
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+# CONFIG_RAW_BINARY is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+# CONFIG_DEBUG_SYMBOLS is not set
+# CONFIG_DEBUG_NOOPT is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+CONFIG_ARCH_CORTEXM4=y
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+CONFIG_ARCH_HAVE_FPU=y
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+CONFIG_ARMV7M_MPU=y
+CONFIG_ARMV7M_MPU_NREGIONS=8
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+# CONFIG_SERIAL_TERMIOS is not set
+# CONFIG_NET_MULTICAST is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
+# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+# CONFIG_ARCH_CHIP_STM32F407VG is not set
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+CONFIG_ARCH_CHIP_STM32F407IG=y
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+# CONFIG_STM32_STM32F10XX is not set
+# CONFIG_STM32_VALUELINE is not set
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F30XX is not set
+CONFIG_STM32_STM32F40XX=y
+CONFIG_STM32_DFU=y
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_HAVE_USBDEV is not set
+CONFIG_STM32_HAVE_OTGFS=y
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKPSRAM is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+# CONFIG_STM32_CCMDATARAM is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
+CONFIG_STM32_ETHMAC=y
+CONFIG_STM32_FSMC=y
+# CONFIG_STM32_HASH is not set
+CONFIG_STM32_I2C1=y
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+# CONFIG_STM32_OTGFS is not set
+# CONFIG_STM32_OTGHS is not set
+CONFIG_STM32_PWR=y
+# CONFIG_STM32_RNG is not set
+# CONFIG_STM32_SDIO is not set
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+CONFIG_STM32_SYSCFG=y
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+# CONFIG_STM32_TIM9 is not set
+# CONFIG_STM32_TIM10 is not set
+# CONFIG_STM32_TIM11 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+# CONFIG_STM32_USART2 is not set
+CONFIG_STM32_USART3=y
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USART6 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+CONFIG_STM32_I2C=y
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_FLASH_PREFETCH is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+CONFIG_STM32_JTAG_FULL_ENABLE=y
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+# CONFIG_STM32_JTAG_SW_ENABLE is not set
+# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+# CONFIG_STM32_CCMEXCLUDE is not set
+# CONFIG_STM32_FSMC_SRAM is not set
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART3_RS485 is not set
+# CONFIG_SERIAL_DISABLE_REORDERING is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
+
+#
+# I2C Configuration
+#
+# CONFIG_STM32_I2C_DYNTIMEO is not set
+CONFIG_STM32_I2CTIMEOSEC=0
+CONFIG_STM32_I2CTIMEOMS=500
+CONFIG_STM32_I2CTIMEOTICKS=500
+# CONFIG_STM32_I2C_DUTY16_9 is not set
+
+#
+# Ethernet MAC configuration
+#
+CONFIG_STM32_PHYADDR=1
+# CONFIG_STM32_PHYINIT is not set
+CONFIG_STM32_MII=y
+CONFIG_STM32_MII_MCO1=y
+# CONFIG_STM32_MII_MCO2 is not set
+# CONFIG_STM32_MII_EXTCLK is not set
+CONFIG_STM32_AUTONEG=y
+CONFIG_STM32_PHYSR=16
+# CONFIG_STM32_PHYSR_ALTCONFIG is not set
+CONFIG_STM32_PHYSR_SPEED=0x0002
+CONFIG_STM32_PHYSR_100MBPS=0x0000
+CONFIG_STM32_PHYSR_MODE=0x0004
+CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004
+# CONFIG_STM32_ETH_PTP is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=196608
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM3240G_EVAL=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm3240g-eval"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Board-Specific Options
+#
+# CONFIG_STM32_ILI9320_DISABLE is not set
+# CONFIG_STM32_ILI9325_DISABLE is not set
+CONFIG_LCD_RDSHIFT=5
+CONFIG_STM3240G_LCD=y
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=10
+# CONFIG_SYSTEM_TIME64 is not set
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2012
+CONFIG_START_MONTH=5
+CONFIG_START_DAY=6
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+CONFIG_SCHED_ONEXIT=y
+CONFIG_SCHED_ONEXIT_MAX=1
+CONFIG_USER_ENTRYPOINT="nxwm_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+CONFIG_SIG_SIGWORK=17
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=12
+CONFIG_NFILE_STREAMS=12
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=32
+CONFIG_MQ_MAXMSGSIZE=48
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=8
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# System call configuration
+#
+CONFIG_SYS_RESERVED=8
+CONFIG_SYS_NNEST=2
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+CONFIG_I2C=y
+# CONFIG_I2C_SLAVE is not set
+CONFIG_I2C_TRANSFER=y
+# CONFIG_I2C_WRITEREAD is not set
+CONFIG_I2C_POLLED=y
+# CONFIG_I2C_TRACE is not set
+# CONFIG_I2C_RESET is not set
+# CONFIG_SPI is not set
+# CONFIG_I2S is not set
+CONFIG_RTC=y
+CONFIG_RTC_DATETIME=y
+# CONFIG_RTC_ALARM is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+CONFIG_INPUT=y
+# CONFIG_INPUT_TSC2007 is not set
+# CONFIG_INPUT_ADS7843E is not set
+CONFIG_INPUT_STMPE811=y
+# CONFIG_STMPE811_SPI is not set
+CONFIG_STMPE811_I2C=y
+CONFIG_STMPE811_ACTIVELOW=y
+CONFIG_STMPE811_EDGE=y
+CONFIG_STMPE811_MULTIPLE=y
+# CONFIG_STMPE811_TSC_DISABLE is not set
+# CONFIG_STMPE811_SWAPXY is not set
+CONFIG_STMPE811_THRESHX=39
+CONFIG_STMPE811_THRESHY=51
+CONFIG_STMPE811_ADC_DISABLE=y
+CONFIG_STMPE811_GPIO_DISABLE=y
+CONFIG_STMPE811_TEMP_DISABLE=y
+CONFIG_LCD=y
+
+#
+# Common LCD Settings
+#
+CONFIG_LCD_NOGETRUN=y
+CONFIG_LCD_MAXCONTRAST=1
+CONFIG_LCD_MAXPOWER=1
+
+#
+# Graphic LCD Devices
+#
+# CONFIG_LCD_P14201 is not set
+# CONFIG_LCD_NOKIA6100 is not set
+# CONFIG_LCD_MIO283QT2 is not set
+# CONFIG_LCD_ST7567 is not set
+# CONFIG_LCD_UG2864AMBAG01 is not set
+# CONFIG_LCD_SSD1289 is not set
+# CONFIG_LCD_SHARP_MEMLCD is not set
+CONFIG_LCD_LANDSCAPE=y
+# CONFIG_LCD_PORTRAIT is not set
+# CONFIG_LCD_RPORTRAIT is not set
+# CONFIG_LCD_RLANDSCAPE is not set
+
+#
+# Alphanumeric/Segment LCD Devices
+#
+# CONFIG_LCD_LCD1602 is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+CONFIG_NETDEVICES=y
+
+#
+# General Ethernet MAC Driver Options
+#
+# CONFIG_NETDEV_MULTINIC is not set
+
+#
+# External Ethernet MAC Device Support
+#
+# CONFIG_NET_DM90x0 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCX24J600 is not set
+# CONFIG_NET_E1000 is not set
+# CONFIG_NET_SLIP is not set
+# CONFIG_NET_VNET is not set
+
+#
+# External Ethernet PHY Device Support
+#
+CONFIG_ETH0_PHY_NONE=y
+# CONFIG_ETH0_PHY_KS8721 is not set
+# CONFIG_ETH0_PHY_KSZ8051 is not set
+# CONFIG_ETH0_PHY_KSZ90x1 is not set
+# CONFIG_ETH0_PHY_DP83848C is not set
+# CONFIG_ETH0_PHY_LAN8720 is not set
+# CONFIG_ETH0_PHY_DM9161 is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_USART3=y
+
+#
+# USART Configuration
+#
+CONFIG_USART3_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_USART3_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART3 Configuration
+#
+CONFIG_USART3_RXBUFSIZE=128
+CONFIG_USART3_TXBUFSIZE=128
+CONFIG_USART3_BAUD=115200
+CONFIG_USART3_BITS=8
+CONFIG_USART3_PARITY=0
+CONFIG_USART3_2STOP=0
+# CONFIG_USART3_IFLOWCONTROL is not set
+# CONFIG_USART3_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+CONFIG_ARCH_HAVE_NET=y
+CONFIG_ARCH_HAVE_PHY=y
+CONFIG_NET=y
+# CONFIG_NET_NOINTS is not set
+CONFIG_NET_MULTIBUFFER=y
+# CONFIG_NET_PROMISCUOUS is not set
+# CONFIG_NET_IPv6 is not set
+CONFIG_NSOCKET_DESCRIPTORS=10
+CONFIG_NET_NACTIVESOCKETS=16
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=562
+# CONFIG_NET_TCPURGDATA is not set
+
+#
+# TCP/IP Networking
+#
+CONFIG_NET_TCP=y
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_TCP_READAHEAD_BUFSIZE=562
+CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
+CONFIG_NET_TCP_RECVDELAY=0
+CONFIG_NET_TCPBACKLOG=y
+# CONFIG_NET_TCP_SPLIT is not set
+# CONFIG_NET_SENDFILE is not set
+
+#
+# UDP Networking
+#
+CONFIG_NET_UDP=y
+CONFIG_NET_UDP_CHECKSUMS=y
+CONFIG_NET_UDP_CONNS=8
+# CONFIG_NET_BROADCAST is not set
+# CONFIG_NET_RXAVAIL is not set
+CONFIG_NET_ICMP=y
+CONFIG_NET_ICMP_PING=y
+# CONFIG_NET_PINGADDRCONF is not set
+# CONFIG_NET_IGMP is not set
+CONFIG_NET_STATISTICS=y
+CONFIG_NET_RECEIVE_WINDOW=562
+CONFIG_NET_ARPTAB_SIZE=16
+# CONFIG_NET_ARP_IPIN is not set
+# CONFIG_NET_ROUTE is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+CONFIG_FS_READABLE=y
+CONFIG_FS_WRITABLE=y
+# CONFIG_FS_RAMMAP is not set
+CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+# CONFIG_FS_FATTIME is not set
+# CONFIG_FAT_DMAMEMORY is not set
+# CONFIG_NFS is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_PROCFS is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+CONFIG_NX=y
+CONFIG_NX_LCDDRIVER=y
+CONFIG_NX_NPLANES=1
+CONFIG_NX_WRITEONLY=y
+
+#
+# Supported Pixel Depths
+#
+CONFIG_NX_DISABLE_1BPP=y
+CONFIG_NX_DISABLE_2BPP=y
+CONFIG_NX_DISABLE_4BPP=y
+CONFIG_NX_DISABLE_8BPP=y
+# CONFIG_NX_DISABLE_16BPP is not set
+CONFIG_NX_DISABLE_24BPP=y
+CONFIG_NX_DISABLE_32BPP=y
+# CONFIG_NX_PACKEDMSFIRST is not set
+
+#
+# Input Devices
+#
+CONFIG_NX_MOUSE=y
+CONFIG_NX_KBD=y
+
+#
+# Framed Window Borders
+#
+CONFIG_NXTK_BORDERWIDTH=4
+# CONFIG_NXTK_DEFAULT_BORDERCOLORS is not set
+CONFIG_NXTK_BORDERCOLOR1=0x5cb7
+CONFIG_NXTK_BORDERCOLOR2=0x21c9
+CONFIG_NXTK_BORDERCOLOR3=0xffdf
+# CONFIG_NXTK_AUTORAISE is not set
+
+#
+# Font Selections
+#
+CONFIG_NXFONTS_CHARBITS=7
+# CONFIG_NXFONT_MONO5X8 is not set
+# CONFIG_NXFONT_SANS17X22 is not set
+# CONFIG_NXFONT_SANS20X26 is not set
+CONFIG_NXFONT_SANS23X27=y
+# CONFIG_NXFONT_SANS22X29 is not set
+# CONFIG_NXFONT_SANS28X37 is not set
+# CONFIG_NXFONT_SANS39X48 is not set
+# CONFIG_NXFONT_SANS17X23B is not set
+# CONFIG_NXFONT_SANS20X27B is not set
+CONFIG_NXFONT_SANS22X29B=y
+# CONFIG_NXFONT_SANS28X37B is not set
+# CONFIG_NXFONT_SANS40X49B is not set
+# CONFIG_NXFONT_SERIF22X29 is not set
+# CONFIG_NXFONT_SERIF29X37 is not set
+# CONFIG_NXFONT_SERIF38X48 is not set
+# CONFIG_NXFONT_SERIF22X28B is not set
+# CONFIG_NXFONT_SERIF27X38B is not set
+# CONFIG_NXFONT_SERIF38X49B is not set
+CONFIG_NXCONSOLE=y
+
+#
+# NxConsole Output Text/Graphics Options
+#
+CONFIG_NXCONSOLE_BPP=16
+CONFIG_NXCONSOLE_CURSORCHAR=137
+CONFIG_NXCONSOLE_MXCHARS=325
+CONFIG_NXCONSOLE_CACHESIZE=32
+CONFIG_NXCONSOLE_LINESEPARATION=0
+# CONFIG_NXCONSOLE_NOWRAP is not set
+
+#
+# NxConsole Input options
+#
+CONFIG_NXCONSOLE_NXKBDIN=y
+CONFIG_NXCONSOLE_KBDBUFSIZE=16
+CONFIG_NXCONSOLE_NPOLLWAITERS=4
+
+#
+# NX Multi-user only options
+#
+CONFIG_NX_MULTIUSER=y
+CONFIG_NX_BLOCKING=y
+CONFIG_NX_MXSERVERMSGS=32
+CONFIG_NX_MXCLIENTMSGS=16
+CONFIG_NX_NXSTART=y
+# CONFIG_NXSTART_EXTERNINIT is not set
+CONFIG_NXSTART_SERVERPRIO=110
+CONFIG_NXSTART_SERVERSTACK=1596
+CONFIG_NXSTART_DEVNO=0
+
+#
+# Memory Management
+#
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+CONFIG_SCHED_WORKQUEUE=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_WORKPRIORITY=192
+CONFIG_SCHED_WORKPERIOD=50000
+CONFIG_SCHED_WORKSTACKSIZE=2048
+# CONFIG_SCHED_LPWORK is not set
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKPERIOD=50000
+CONFIG_SCHED_LPWORKSTACKSIZE=2048
+CONFIG_SCHED_USRWORK=y
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NETTEST is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_DISCOVER is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+# CONFIG_EXAMPLES_WGET is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+CONFIG_NETUTILS_RESOLV=y
+CONFIG_NET_RESOLV_ENTRIES=4
+CONFIG_NET_RESOLV_MAXRESPONSE=96
+# CONFIG_NETUTILS_SMTP is not set
+CONFIG_NETUTILS_TELNETD=y
+CONFIG_NETUTILS_TFTPC=y
+# CONFIG_NETUTILS_THTTPD is not set
+CONFIG_NETUTILS_UIPLIB=y
+CONFIG_NETUTILS_WEBCLIENT=y
+CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
+# CONFIG_NETUTILS_WEBSERVER is not set
+# CONFIG_NETUTILS_DISCOVER is not set
+# CONFIG_NETUTILS_XMLRPC is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_ADDROUTE is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_DELROUTE is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_NSFMOUNT is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+# CONFIG_NSH_CMDOPT_DF_H is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_MAXARGUMENTS=6
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_CONSOLE=y
+
+#
+# USB Trace Support
+#
+# CONFIG_NSH_CONDEV is not set
+# CONFIG_NSH_ARCHINIT is not set
+CONFIG_NSH_TELNET=y
+CONFIG_NSH_TELNETD_PORT=23
+CONFIG_NSH_TELNETD_DAEMONPRIO=100
+CONFIG_NSH_TELNETD_DAEMONSTACKSIZE=2048
+CONFIG_NSH_TELNETD_CLIENTPRIO=100
+CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048
+CONFIG_NSH_IOBUFFER_SIZE=512
+# CONFIG_NSH_TELNET_LOGIN is not set
+CONFIG_NSH_IPADDR=0x0a000002
+CONFIG_NSH_DRIPADDR=0x0a000001
+CONFIG_NSH_NETMASK=0xffffff00
+CONFIG_NSH_NOMAC=y
+CONFIG_NSH_MAX_ROUNDTRIP=20
+
+#
+# NxWidgets/NxWM
+#
+CONFIG_NXWIDGETS=y
+
+#
+# NX Server/Device Configuration
+#
+CONFIG_NXWIDGETS_FLICKERFREE=y
+# CONFIG_NXWIDGETS_EXTERNINIT is not set
+CONFIG_NXWIDGETS_DEVNO=0
+CONFIG_NXWIDGETS_CLIENTPRIO=100
+CONFIG_NXWIDGETS_LISTENERPRIO=100
+CONFIG_NXWIDGETS_LISTENERSTACK=2048
+# CONFIG_NXWIDGET_EVENTWAIT is not set
+
+#
+# NXWidget Configuration
+#
+CONFIG_NXWIDGETS_BPP=16
+CONFIG_NXWIDGETS_SIZEOFCHAR=1
+
+#
+# NXWidget Default Values
+#
+# CONFIG_NXWIDGETS_SYSTEM_CUSTOM_FONTID is not set
+CONFIG_NXWIDGETS_TNXARRAY_INITIALSIZE=16
+CONFIG_NXWIDGETS_TNXARRAY_SIZEINCREMENT=8
+CONFIG_NXWIDGETS_CUSTOM_FILLCOLORS=y
+CONFIG_NXWIDGETS_DEFAULT_BACKGROUNDCOLOR=0x9dfb
+CONFIG_NXWIDGETS_DEFAULT_SELECTEDBACKGROUNDCOLOR=0xd73e
+CONFIG_NXWIDGETS_DEFAULT_HIGHLIGHTCOLOR=0xc618
+CONFIG_NXWIDGETS_CUSTOM_EDGECOLORS=y
+CONFIG_NXWIDGETS_DEFAULT_SHINEEDGECOLOR=0xffdf
+CONFIG_NXWIDGETS_DEFAULT_SHADOWEDGECOLOR=0x21e9
+# CONFIG_NXWIDGETS_CUSTOM_TEXTCOLORS is not set
+CONFIG_NXWIDGETS_TRANSPARENT_COLOR=0x0
+
+#
+# Keypad behavior
+#
+CONFIG_NXWIDGETS_FIRST_REPEAT_TIME=500
+CONFIG_NXWIDGETS_CONTINUE_REPEAT_TIME=200
+CONFIG_NXWIDGETS_DOUBLECLICK_TIME=350
+CONFIG_NXWIDGETS_KBDBUFFER_SIZE=16
+CONFIG_NXWIDGETS_CURSORCONTROL_SIZE=4
+# CONFIG_NXWIDGET_MEMMONITOR is not set
+CONFIG_NXWM=y
+
+#
+# NxWM General settings
+#
+# CONFIG_NXWM_SYSTEM_CUSTOM_FONTID is not set
+CONFIG_NXWM_UNITTEST=y
+
+#
+# Color configuration
+#
+# CONFIG_NXWM_CUSTOM_FILLCOLORS is not set
+# CONFIG_NXWM_CUSTOM_EDGECOLORS is not set
+# CONFIG_NXWM_CUSTOM_TEXTCOLORS is not set
+
+#
+# Background Image
+#
+# CONFIG_NXWM_DISABLE_BACKGROUND_IMAGE is not set
+CONFIG_NXWM_BACKGROUND_IMAGE="NXWidgets::g_nuttxBitmap160x160"
+
+#
+# NxWM Taskbar Configuration
+#
+
+#
+# Horizontal and vertical spacing of icons in the task bar
+#
+CONFIG_NXWM_TASKBAR_VSPACING=4
+CONFIG_NXWM_TASKBAR_HSPACING=2
+# CONFIG_NXWM_TASKBAR_TOP is not set
+# CONFIG_NXWM_TASKBAR_BOTTOM is not set
+CONFIG_NXWM_TASKBAR_LEFT=y
+# CONFIG_NXWM_TASKBAR_RIGHT is not set
+# CONFIG_NXWM_CUSTOM_TASKBAR_WIDTH is not set
+# CONFIG_NXWM_TASKBAR_ICONSCALE is not set
+# CONFIG_NXWM_DISABLE_MINIMIZE is not set
+# CONFIG_NXWM_TASKBAR_NO_BORDER is not set
+
+#
+# NxWM Toolbar Configuration
+#
+# CONFIG_NXWM_CUSTOM_TOOLBAR_HEIGHT is not set
+
+#
+# NxWM Application Window Configuration
+#
+# CONFIG_NXWM_CUSTOM_APPWINDOW_ICONS is not set
+
+#
+# NxWM Start Window Configuration
+#
+
+#
+# Horizontal and vertical spacing of icons in the task bar
+#
+CONFIG_NXWM_STARTWINDOW_VSPACING=4
+CONFIG_NXWM_STARTWINDOW_HSPACING=4
+# CONFIG_NXWM_CUSTOM_STARTWINDOW_ICON is not set
+CONFIG_NXWM_STARTWINDOW_MQNAME="/dev/nxwm"
+CONFIG_NXWM_STARTWINDOW_MXMSGS=32
+CONFIG_NXWM_STARTWINDOW_MXMPRIO=42
+CONFIG_NXWM_STARTWINDOW_PRIO=100
+CONFIG_NXWM_STARTWINDOW_STACKSIZE=2048
+
+#
+# NxConsole Window Configuration
+#
+CONFIG_NXWM_NXCONSOLE_PRIO=100
+CONFIG_NXWM_NXCONSOLE_STACKSIZE=2048
+# CONFIG_NXWM_NXCONSOLE_CUSTOM_COLORS is not set
+# CONFIG_NXWM_NXCONSOLE_CUSTOM_FONTID is not set
+# CONFIG_NXWM_CUSTOM_NXCONSOLE_ICON is not set
+
+#
+# NxWM Touchscreen Configuration
+#
+CONFIG_NXWM_TOUCHSCREEN=y
+
+#
+# Touchscreen device settings
+#
+CONFIG_NXWM_TOUCHSCREEN_DEVNO=0
+CONFIG_NXWM_TOUCHSCREEN_DEVPATH="/dev/input0"
+CONFIG_NXWM_TOUCHSCREEN_SIGNO=5
+CONFIG_NXWM_TOUCHSCREEN_LISTENERPRIO=100
+CONFIG_NXWM_TOUCHSCREEN_LISTENERSTACK=1024
+
+#
+# NxWM Keyboard Configuration
+#
+CONFIG_NXWM_KEYBOARD=y
+
+#
+# Keyboard device settings
+#
+CONFIG_NXWM_KEYBOARD_DEVPATH="/dev/console"
+CONFIG_NXWM_KEYBOARD_SIGNO=6
+CONFIG_NXWM_KEYBOARD_BUFSIZE=16
+CONFIG_NXWM_KEYBOARD_LISTENERPRIO=100
+CONFIG_NXWM_KEYBOARD_LISTENERSTACK=2048
+
+#
+# NxWM Calibration display settings
+#
+CONFIG_NXWM_CALIBRATION_MARGIN=40
+# CONFIG_NXWM_CALIBRATION_CUSTOM_COLORS is not set
+# CONFIG_NXWM_CALIBRATION_MESSAGES is not set
+# CONFIG_NXWM_CALIBRATION_ANISOTROPIC is not set
+# CONFIG_NXWM_CUSTOM_CALIBRATION_ICON is not set
+CONFIG_NXWM_CALIBRATION_SIGNO=5
+CONFIG_NXWM_CALIBRATION_LISTENERPRIO=100
+CONFIG_NXWM_CALIBRATION_LISTENERSTACK=2048
+
+#
+# NxWM Hex Calculator display settings
+#
+# CONFIG_NXWM_HEXCALCULATOR_CUSTOM_COLORS is not set
+# CONFIG_NXWM_CUSTOM_HEXCALCULATOR_ICON is not set
+CONFIG_NXWM_HEXCALCULATOR_CUSTOM_FONTID=y
+CONFIG_NXWM_HEXCALCULATOR_FONTID=5
+# CONFIG_NXWM_MEDIAPLAYER is not set
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System NSH Add-Ons
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+# CONFIG_SYSTEM_I2CTOOL is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/stm3240g-eval/nxwm/appconfig b/nuttx/configs/stm3240g-eval/knxwm/setenv.sh
index 6a5864fb1..d2f43cd1a 100644..100755
--- a/nuttx/configs/stm3240g-eval/nxwm/appconfig
+++ b/nuttx/configs/stm3240g-eval/knxwm/setenv.sh
@@ -1,7 +1,7 @@
-############################################################################
-# configs/stm3240g-eval/nxwm/appconfig
+#!/bin/bash
+# configs/stm3240g-eval/knxwm/setenv.sh
 #
-#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2013 Gregory Nutt. All rights reserved.
 #   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
@@ -31,23 +31,37 @@
 # ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 # POSSIBILITY OF SUCH DAMAGE.
 #
-############################################################################
-
-# The NSH Library -- NOTE:  The NxWM unit test must be installed at
-# apps/external in order to build this example.  See
-# NxWidgets/UnitTests/README.txt for additional information
-
-CONFIGURED_APPS += system/readline
-CONFIGURED_APPS += nshlib
-
-# Networking libraries.
-
-ifeq ($(CONFIG_NET),y)
-CONFIGURED_APPS += netutils/uiplib
-CONFIGURED_APPS += netutils/resolv
-CONFIGURED_APPS += netutils/webclient
-CONFIGURED_APPS += netutils/tftpc
-ifeq ($(CONFIG_NSH_TELNET),y)
-CONFIGURED_APPS += netutils/telnetd
-endif
-endif
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/stm3240g-eval/nxwm/defconfig b/nuttx/configs/stm3240g-eval/nxwm/defconfig
index 362d451fe..033eed142 100644
--- a/nuttx/configs/stm3240g-eval/nxwm/defconfig
+++ b/nuttx/configs/stm3240g-eval/nxwm/defconfig
@@ -1,375 +1,443 @@
-############################################################################
-# configs/stm3240g-eval/nxwm/defconfig
-#
-#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
 #
-CONFIG_ARCH="arm"
-CONFIG_ARCH_ARM=y
-CONFIG_ARCH_CORTEXM4=y
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32F407IG=y
-CONFIG_ARCH_BOARD="stm3240g-eval"
-CONFIG_ARCH_BOARD_STM3240G_EVAL=y
-CONFIG_BOARD_LOOPSPERMSEC=16717
-CONFIG_RAM_SIZE=196608
-CONFIG_RAM_START=0x20000000
-CONFIG_ARCH_IRQPRIO=y
-CONFIG_ARCH_FPU=n
-CONFIG_ARCH_INTERRUPTSTACK=0
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_BOOTLOADER=n
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_BUTTONS=n
-CONFIG_ARCH_CALIBRATION=n
-CONFIG_ARCH_DMA=n
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
 
 #
-# Identify toolchain and linker options
+# Build Setup
 #
-CONFIG_STM32_CODESOURCERYW=y
-CONFIG_STM32_CODESOURCERYL=n
-CONFIG_STM32_ATOLLIC_LITE=n
-CONFIG_STM32_ATOLLIC_PRO=n
-CONFIG_STM32_DEVKITARM=n
-CONFIG_STM32_RAISONANCE=n
-CONFIG_STM32_BUILDROOT=n
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
 
 #
-# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
+# Build Configuration
 #
-CONFIG_STM32_DFU=y
-CONFIG_STM32_JTAG_FULL_ENABLE=y
-CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
-CONFIG_STM32_JTAG_SW_ENABLE=n
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+# CONFIG_RAW_BINARY is not set
 
 #
-# On-chip CCM SRAM configuration
+# Customize Header Files
 #
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
 
 #
-# On-board FSMC SRAM configuration
+# Debug Options
 #
-CONFIG_STM32_FSMC_SRAM=n
-CONFIG_HEAP2_BASE=0x64000000
-CONFIG_HEAP2_SIZE=2097152
-  
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+# CONFIG_DEBUG_SYMBOLS is not set
+# CONFIG_DEBUG_NOOPT is not set
+
 #
-# Individual subsystems can be enabled:
+# System Type
 #
-# AHB1:
-CONFIG_STM32_CRC=n
-CONFIG_STM32_BKPSRAM=n
-CONFIG_STM32_CCMDATARAM=n
-CONFIG_STM32_DMA1=n
-CONFIG_STM32_DMA2=n
+# CONFIG_ARCH_8051 is not set
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+CONFIG_ARCH_CORTEXM4=y
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+CONFIG_ARCH_HAVE_FPU=y
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+# CONFIG_SERIAL_TERMIOS is not set
+# CONFIG_NET_MULTICAST is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
+# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+# CONFIG_ARCH_CHIP_STM32F407VG is not set
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+CONFIG_ARCH_CHIP_STM32F407IG=y
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+# CONFIG_STM32_STM32F10XX is not set
+# CONFIG_STM32_VALUELINE is not set
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F30XX is not set
+CONFIG_STM32_STM32F40XX=y
+CONFIG_STM32_DFU=y
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_HAVE_USBDEV is not set
+CONFIG_STM32_HAVE_OTGFS=y
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKPSRAM is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+# CONFIG_STM32_CCMDATARAM is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
 CONFIG_STM32_ETHMAC=y
-CONFIG_STM32_OTGHS=n
-# AHB2:
-CONFIG_STM32_DCMI=n
-CONFIG_STM32_CRYP=n
-CONFIG_STM32_HASH=n
-CONFIG_STM32_RNG=n
-CONFIG_STM32_OTGFS=n
-# AHB3:
 CONFIG_STM32_FSMC=y
-# APB1:
-CONFIG_STM32_TIM2=n
-CONFIG_STM32_TIM3=n
-CONFIG_STM32_TIM4=n
-CONFIG_STM32_TIM5=n
-CONFIG_STM32_TIM6=n
-CONFIG_STM32_TIM7=n
-CONFIG_STM32_TIM12=n
-CONFIG_STM32_TIM13=n
-CONFIG_STM32_TIM14=n
-CONFIG_STM32_WWDG=n
-CONFIG_STM32_IWDG=n
-CONFIG_STM32_SPI2=n
-CONFIG_STM32_SPI3=n
-CONFIG_STM32_USART2=n
-CONFIG_STM32_USART3=y
-CONFIG_STM32_UART4=n
-CONFIG_STM32_UART5=n
+# CONFIG_STM32_HASH is not set
 CONFIG_STM32_I2C1=y
-CONFIG_STM32_I2C2=n
-CONFIG_STM32_I2C3=n
-CONFIG_STM32_CAN1=n
-CONFIG_STM32_CAN2=n
-CONFIG_STM32_DAC=n
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+# CONFIG_STM32_OTGFS is not set
+# CONFIG_STM32_OTGHS is not set
 CONFIG_STM32_PWR=y
-# APB2:
-CONFIG_STM32_TIM1=n
-CONFIG_STM32_TIM8=n
-CONFIG_STM32_USART1=n
-CONFIG_STM32_USART6=n
-CONFIG_STM32_ADC1=n
-CONFIG_STM32_ADC2=n
-CONFIG_STM32_ADC3=n
-CONFIG_STM32_SDIO=n
-CONFIG_STM32_SPI1=n
+# CONFIG_STM32_RNG is not set
+# CONFIG_STM32_SDIO is not set
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
 CONFIG_STM32_SYSCFG=y
-CONFIG_STM32_TIM9=n
-CONFIG_STM32_TIM10=n
-CONFIG_STM32_TIM11=n
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+# CONFIG_STM32_TIM9 is not set
+# CONFIG_STM32_TIM10 is not set
+# CONFIG_STM32_TIM11 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+# CONFIG_STM32_USART2 is not set
+CONFIG_STM32_USART3=y
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USART6 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+CONFIG_STM32_I2C=y
 
 #
-# STM32F40xxx specific serial device driver settings
+# Alternate Pin Mapping
 #
-CONFIG_USART1_SERIAL_CONSOLE=n
-CONFIG_USART2_SERIAL_CONSOLE=n
-CONFIG_USART3_SERIAL_CONSOLE=y
-CONFIG_UART4_SERIAL_CONSOLE=n
-CONFIG_UART5_SERIAL_CONSOLE=n
-
-CONFIG_USART1_TXBUFSIZE=128
-CONFIG_USART2_TXBUFSIZE=128
-CONFIG_USART3_TXBUFSIZE=128
-CONFIG_UART4_TXBUFSIZE=128
-CONFIG_UART5_TXBUFSIZE=128
-
-CONFIG_USART1_RXBUFSIZE=128
-CONFIG_USART2_RXBUFSIZE=128
-CONFIG_USART3_RXBUFSIZE=128
-CONFIG_UART4_RXBUFSIZE=128
-CONFIG_UART5_RXBUFSIZE=128
-
-CONFIG_USART1_BAUD=115200
-CONFIG_USART2_BAUD=115200
-CONFIG_USART3_BAUD=115200
-CONFIG_UART4_BAUD=115200
-CONFIG_UART5_BAUD=115200
-
-CONFIG_USART1_BITS=8
-CONFIG_USART2_BITS=8
-CONFIG_USART3_BITS=8
-CONFIG_UART4_BITS=8
-CONFIG_UART5_BITS=8
-
-CONFIG_USART1_PARITY=0
-CONFIG_USART2_PARITY=0
-CONFIG_USART3_PARITY=0
-CONFIG_UART4_PARITY=0
-CONFIG_UART5_PARITY=0
+# CONFIG_STM32_FLASH_PREFETCH is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+CONFIG_STM32_JTAG_FULL_ENABLE=y
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+# CONFIG_STM32_JTAG_SW_ENABLE is not set
+# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+# CONFIG_STM32_CCMEXCLUDE is not set
+# CONFIG_STM32_FSMC_SRAM is not set
+CONFIG_STM32_USART=y
 
-CONFIG_USART1_2STOP=0
-CONFIG_USART2_2STOP=0
-CONFIG_USART3_2STOP=0
-CONFIG_UART4_2STOP=0
-CONFIG_UART5_2STOP=0
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART3_RS485 is not set
+# CONFIG_SERIAL_DISABLE_REORDERING is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
 
 #
-# STM32F40xxx specific CAN device driver settings
+# I2C Configuration
 #
-CONFIG_CAN=n
-CONFIG_CAN_EXTID=n
-#CONFIG_CAN_FIFOSIZE
-#CONFIG_CAN_NPENDINGRTR
-CONFIG_CAN_LOOPBACK=n
-CONFIG_CAN1_BAUD=700000
-CONFIG_CAN2_BAUD=700000
+# CONFIG_STM32_I2C_DYNTIMEO is not set
+CONFIG_STM32_I2CTIMEOSEC=0
+CONFIG_STM32_I2CTIMEOMS=500
+CONFIG_STM32_I2CTIMEOTICKS=500
+# CONFIG_STM32_I2C_DUTY16_9 is not set
 
 #
-# STM32F40xxx Ethernet device driver settings
+# Ethernet MAC configuration
 #
 CONFIG_STM32_PHYADDR=1
+# CONFIG_STM32_PHYINIT is not set
 CONFIG_STM32_MII=y
 CONFIG_STM32_MII_MCO1=y
-CONFIG_STM32_MII_MCO2=n
-CONFIG_STM32_RMII=n
+# CONFIG_STM32_MII_MCO2 is not set
+# CONFIG_STM32_MII_EXTCLK is not set
 CONFIG_STM32_AUTONEG=y
-#CONFIG_STM32_ETHFD
-#CONFIG_STM32_ETH100MB
 CONFIG_STM32_PHYSR=16
+# CONFIG_STM32_PHYSR_ALTCONFIG is not set
 CONFIG_STM32_PHYSR_SPEED=0x0002
 CONFIG_STM32_PHYSR_100MBPS=0x0000
 CONFIG_STM32_PHYSR_MODE=0x0004
 CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004
-CONFIG_STM32_ETH_PTP=n
-CONFIG_STM32_ETHMAC_REGDEBUG=n
+# CONFIG_STM32_ETH_PTP is not set
 
 #
-# I2C configuration
+# USB Host Configuration
 #
-CONFIG_I2C=y
-CONFIG_I2C_POLLED=y
-CONFIG_I2C_TRANSFER=y
-CONFIG_I2C_TRACE=n
 
 #
-# ADC configuration
-#
-# Enable ADC driver support.  The STM3240G-EVAL has a 10 Kohm potentiometer
-# RV1 connected to PF9 of STM32F407IGH6 on the board: TIM14_CH1/ SMC_CD/ADC3_IN7
+# USB Device Configuration
 #
-CONFIG_ADC=n
-#CONFIG_STM32_TIM1_ADC=y
-CONFIG_STM32_TIM1_ADC3=y
-CONFIG_STM32_ADC3_SAMPLE_FREQUENCY=100
 
 #
-# PWM configuration
+# Architecture Options
 #
-# The STM3240G-Eval has no real on-board PWM devices, but the board can be configured to output
-# a pulse train using several options (see board.h).  Here the default setup is for TIM8, CH4.
-# Don't forget to enable CONFIG_PWM and CONFIG_STM32_TIM8.
-#
-CONFIG_PWM=n
-CONFIG_PWM_PULSECOUNT=y
-CONFIG_STM32_TIM8_PWM=y
-CONFIG_STM32_TIM8_CHANNEL=4
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
 
 #
-# General build options
+# Board Settings
 #
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=y
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=n
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
 
 #
-# General OS setup
+# Interrupt options
 #
-CONFIG_USER_ENTRYPOINT="nxwm_main"
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_DEBUG_FS=n
-CONFIG_DEBUG_GRAPHICS=n
-CONFIG_DEBUG_LCD=n
-CONFIG_DEBUG_USB=n
-CONFIG_DEBUG_NET=n
-CONFIG_DEBUG_RTC=n
-CONFIG_DEBUG_ANALOG=n
-CONFIG_DEBUG_PWM=n
-CONFIG_DEBUG_CAN=n
-CONFIG_DEBUG_I2C=n
-CONFIG_DEBUG_INPUT=n
-
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_MM_REGIONS=2
-CONFIG_ARCH_LOWPUTC=y
-CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_START_YEAR=2012
-CONFIG_START_MONTH=5
-CONFIG_START_DAY=6
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
-CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=n
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SCHED_WORKQUEUE=y
-CONFIG_SCHED_WORKPRIORITY=192
-CONFIG_SCHED_WORKPERIOD=50000
-CONFIG_SCHED_WORKSTACKSIZE=2048
-CONFIG_SIG_SIGWORK=17
-CONFIG_SCHED_WAITPID=y
-CONFIG_SCHED_ATEXIT=n
-CONFIG_SCHED_ONEXIT=y
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
 
 #
-# System Logging
+# Boot options
 #
-
-CONFIG_SYSLOG=n
-CONFIG_RAMLOG=n
-CONFIG_RAMLOG_CONSOLE=n
-CONFIG_RAMLOG_SYSLOG=n
-#CONFIG_RAMLOG_NPOLLWAITERS
-#CONFIG_RAMLOG_CONSOLE_BUFSIZE
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
 
 #
-# Settings for NXFLAT
+# Boot Memory Configuration
 #
-CONFIG_NXFLAT=n
-CONFIG_NXFLAT_DUMPBUFFER=n
-CONFIG_SYMTAB_ORDEREDBYNAME=y
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=196608
 
 #
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
+# Board Selection
 #
-# There are certain dependency relationships in these
-# features.
+CONFIG_ARCH_BOARD_STM3240G_EVAL=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm3240g-eval"
+
 #
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
+# Common Board Options
 #
-CONFIG_DISABLE_CLOCK=n
-CONFIG_DISABLE_POSIX_TIMERS=n
-CONFIG_DISABLE_PTHREAD=n
-CONFIG_DISABLE_SIGNALS=n
-CONFIG_DISABLE_MQUEUE=n
-CONFIG_DISABLE_MOUNTPOINT=n
-CONFIG_DISABLE_ENVIRON=n
-CONFIG_DISABLE_POLL=y
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+CONFIG_NSH_MMCSDMINOR=0
 
 #
-# Misc libc settings
+# Board-Specific Options
 #
-CONFIG_NOPRINTF_FIELDWIDTH=n
+# CONFIG_STM32_ILI9320_DISABLE is not set
+# CONFIG_STM32_ILI9325_DISABLE is not set
+CONFIG_LCD_RDSHIFT=5
+CONFIG_STM3240G_LCD=y
 
 #
-# Allow for architecture optimized implementations
+# RTOS Features
 #
-# The architecture can provide optimized versions of the
-# following to improve system performance
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=10
+# CONFIG_SYSTEM_TIME64 is not set
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2012
+CONFIG_START_MONTH=5
+CONFIG_START_DAY=6
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+CONFIG_SCHED_ONEXIT=y
+CONFIG_SCHED_ONEXIT_MAX=1
+CONFIG_USER_ENTRYPOINT="nxwm_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Signal Numbers
 #
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+CONFIG_SIG_SIGWORK=17
 
 #
 # Sizes of configurable things (0 disables)
@@ -380,9 +448,6 @@ CONFIG_NPTHREAD_KEYS=4
 CONFIG_NFILE_DESCRIPTORS=12
 CONFIG_NFILE_STREAMS=12
 CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=64
-CONFIG_STDIO_LINEBUFFER=y
-CONFIG_NUNGET_CHARS=2
 CONFIG_PREALLOC_MQ_MSGS=32
 CONFIG_MQ_MAXMSGSIZE=48
 CONFIG_MAX_WDOGPARMS=2
@@ -390,488 +455,851 @@ CONFIG_PREALLOC_WDOGS=8
 CONFIG_PREALLOC_TIMERS=4
 
 #
-# Framebuffer driver options
+# Stack and heap information
 #
-CONFIG_FB_CMAP=n
-CONFIG_FB_HWCURSOR=n
-CONFIG_FB_HWCURSORIMAGE=n
-#CONFIG_FB_HWCURSORSIZE
-#CONFIG_FB_TRANSPARENCY
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
 
 #
-# Filesystem configuration
+# Device Drivers
 #
-CONFIG_FS_FAT=y
-CONFIG_FAT_LCNAMES=y
-CONFIG_FAT_LFN=y
-CONFIG_FAT_MAXFNAME=32
-CONFIG_FS_NXFFS=n
-CONFIG_FS_ROMFS=n
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+CONFIG_I2C=y
+# CONFIG_I2C_SLAVE is not set
+CONFIG_I2C_TRANSFER=y
+# CONFIG_I2C_WRITEREAD is not set
+CONFIG_I2C_POLLED=y
+# CONFIG_I2C_TRACE is not set
+# CONFIG_I2C_RESET is not set
+# CONFIG_SPI is not set
+# CONFIG_I2S is not set
+CONFIG_RTC=y
+CONFIG_RTC_DATETIME=y
+# CONFIG_RTC_ALARM is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+CONFIG_INPUT=y
+# CONFIG_INPUT_TSC2007 is not set
+# CONFIG_INPUT_ADS7843E is not set
+CONFIG_INPUT_STMPE811=y
+# CONFIG_STMPE811_SPI is not set
+CONFIG_STMPE811_I2C=y
+CONFIG_STMPE811_ACTIVELOW=y
+CONFIG_STMPE811_EDGE=y
+CONFIG_STMPE811_MULTIPLE=y
+# CONFIG_STMPE811_TSC_DISABLE is not set
+# CONFIG_STMPE811_SWAPXY is not set
+CONFIG_STMPE811_THRESHX=39
+CONFIG_STMPE811_THRESHY=51
+CONFIG_STMPE811_ADC_DISABLE=y
+CONFIG_STMPE811_GPIO_DISABLE=y
+CONFIG_STMPE811_TEMP_DISABLE=y
+CONFIG_LCD=y
 
 #
-# Maintain legacy build behavior (revisit)
+# Common LCD Settings
 #
+CONFIG_LCD_NOGETRUN=y
+CONFIG_LCD_MAXCONTRAST=1
+CONFIG_LCD_MAXPOWER=1
 
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SPI=y
-CONFIG_MMCSD_SDIO=y
-CONFIG_MTD=y
+#
+# Graphic LCD Devices
+#
+# CONFIG_LCD_P14201 is not set
+# CONFIG_LCD_NOKIA6100 is not set
+# CONFIG_LCD_MIO283QT2 is not set
+# CONFIG_LCD_ST7567 is not set
+# CONFIG_LCD_UG2864AMBAG01 is not set
+# CONFIG_LCD_SSD1289 is not set
+# CONFIG_LCD_SHARP_MEMLCD is not set
+CONFIG_LCD_LANDSCAPE=y
+# CONFIG_LCD_PORTRAIT is not set
+# CONFIG_LCD_RPORTRAIT is not set
+# CONFIG_LCD_RLANDSCAPE is not set
 
 #
-# SPI-based MMC/SD driver
+# Alphanumeric/Segment LCD Devices
 #
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
+# CONFIG_LCD_LCD1602 is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+CONFIG_NETDEVICES=y
 
 #
-# Block driver buffering
+# General Ethernet MAC Driver Options
 #
-CONFIG_FS_READAHEAD=n
-CONFIG_FS_WRITEBUFFER=n
+# CONFIG_NETDEV_MULTINIC is not set
 
 #
-# STM32 SDIO-based MMC/SD driver
+# External Ethernet MAC Device Support
 #
-CONFIG_SDIO_DMA=n
-#CONFIG_SDIO_PRI=128
-#CONFIG_SDIO_DMAPRIO
-#CONFIG_SDIO_WIDTH_D1_ONLY
-CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
-CONFIG_MMCSD_MMCSUPPORT=n
-CONFIG_MMCSD_HAVECARDDETECT=n
+# CONFIG_NET_DM90x0 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCX24J600 is not set
+# CONFIG_NET_E1000 is not set
+# CONFIG_NET_SLIP is not set
+# CONFIG_NET_VNET is not set
 
 #
-# TCP/IP and UDP support via uIP
+# External Ethernet PHY Device Support
 #
-CONFIG_NET=y
-CONFIG_NET_NOINTS=n
-CONFIG_NET_MULTIBUFFER=y
-CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=10
-CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=562
-CONFIG_NET_TCP=y
-CONFIG_NET_TCP_CONNS=40
-#CONFIG_NET_TCP_READAHEAD_BUFSIZE
-CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
-CONFIG_NET_TCPBACKLOG=y
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=y
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=y
-CONFIG_NET_ICMP_PING=y
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-CONFIG_NET_BROADCAST=n
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_ARP_IPIN=n
-CONFIG_NET_MULTICAST=n
+CONFIG_ETH0_PHY_NONE=y
+# CONFIG_ETH0_PHY_KS8721 is not set
+# CONFIG_ETH0_PHY_KSZ8051 is not set
+# CONFIG_ETH0_PHY_KSZ90x1 is not set
+# CONFIG_ETH0_PHY_DP83848C is not set
+# CONFIG_ETH0_PHY_LAN8720 is not set
+# CONFIG_ETH0_PHY_DM9161 is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_USART3=y
 
 #
-# UIP Network Utilities
+# USART Configuration
 #
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
+CONFIG_USART3_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_USART3_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
 
 #
-# FTP Server
+# USART3 Configuration
 #
-CONFIG_FTPD_CMDBUFFERSIZE=2048
+CONFIG_USART3_RXBUFSIZE=128
+CONFIG_USART3_TXBUFSIZE=128
+CONFIG_USART3_BAUD=115200
+CONFIG_USART3_BITS=8
+CONFIG_USART3_PARITY=0
+CONFIG_USART3_2STOP=0
+# CONFIG_USART3_IFLOWCONTROL is not set
+# CONFIG_USART3_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
 
 #
-# RTC Configuration
+# System Logging Device Options
 #
-CONFIG_RTC=y
-CONFIG_RTC_DATETIME=y
-CONFIG_RTC_HIRES=n
-CONFIG_RTC_FREQUENCY=1
-CONFIG_RTC_ALARM=n
 
 #
-# Input device configuration
+# System Logging
 #
-CONFIG_INPUT=y
-CONFIG_INPUT_TSC2007=n
+# CONFIG_RAMLOG is not set
 
 #
-# STMPE811 input device configuration
+# Networking Support
 #
-# Prerequisites:  CONFIG_INPUT=y
-# Other settings that effect the driver: CONFIG_DISABLE_POLL
+CONFIG_ARCH_HAVE_NET=y
+CONFIG_ARCH_HAVE_PHY=y
+CONFIG_NET=y
+# CONFIG_NET_NOINTS is not set
+CONFIG_NET_MULTIBUFFER=y
+# CONFIG_NET_PROMISCUOUS is not set
+# CONFIG_NET_IPv6 is not set
+CONFIG_NSOCKET_DESCRIPTORS=10
+CONFIG_NET_NACTIVESOCKETS=16
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=562
+# CONFIG_NET_TCPURGDATA is not set
+
 #
-CONFIG_INPUT_STMPE811=y
-CONFIG_STMPE811_SPI=n
-CONFIG_STMPE811_I2C=y
-CONFIG_STMPE811_MULTIPLE=y
-CONFIG_STMPE811_ACTIVELOW=y
-CONFIG_STMPE811_EDGE=y
-#CONFIG_STMPE811_NPOLLWAITERS
-CONFIG_STMPE811_TSC_DISABLE=n
-CONFIG_STMPE811_ADC_DISABLE=y
-CONFIG_STMPE811_GPIO_DISABLE=y
-CONFIG_STMPE811_GPIOINT_DISABLE=y
-CONFIG_STMPE811_SWAPXY=n
-CONFIG_STMPE811_TEMP_DISABLE=y
-CONFIG_STMPE811_REGDEBUG=n
-CONFIG_STMPE811_THRESHX=39
-CONFIG_STMPE811_THRESHY=51
+# TCP/IP Networking
+#
+CONFIG_NET_TCP=y
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_TCP_READAHEAD_BUFSIZE=562
+CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
+CONFIG_NET_TCP_RECVDELAY=0
+CONFIG_NET_TCPBACKLOG=y
+# CONFIG_NET_TCP_SPLIT is not set
+# CONFIG_NET_SENDFILE is not set
 
 #
-# STM32 USB OTG FS Device Configuration
+# UDP Networking
 #
-CONFIG_USBDEV=n
-CONFIG_USBDEV_ISOCHRONOUS=n
-CONFIG_USBDEV_DUALSPEED=n
-CONFIG_USBDEV_SELFPOWERED=y
-CONFIG_USBDEV_REMOTEWAKEUP=n
-CONFIG_USBDEV_MAXPOWER=100
-CONFIG_USBDEV_TRACE=n
-CONFIG_USBDEV_TRACE_NRECORDS=128
+CONFIG_NET_UDP=y
+CONFIG_NET_UDP_CHECKSUMS=y
+CONFIG_NET_UDP_CONNS=8
+# CONFIG_NET_BROADCAST is not set
+# CONFIG_NET_RXAVAIL is not set
+CONFIG_NET_ICMP=y
+CONFIG_NET_ICMP_PING=y
+# CONFIG_NET_PINGADDRCONF is not set
+# CONFIG_NET_IGMP is not set
+CONFIG_NET_STATISTICS=y
+CONFIG_NET_RECEIVE_WINDOW=562
+CONFIG_NET_ARPTAB_SIZE=16
+# CONFIG_NET_ARP_IPIN is not set
+# CONFIG_NET_ROUTE is not set
 
 #
-# STM32 USB OTG FS Host Configuration
+# File Systems
 #
-CONFIG_USBHOST=n
-#CONFIG_STM32_OTGFS_RXFIFO_SIZE
-#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE
-#CONFIG_STM32_OTGFS_PTXFIFO_SIZE
-#CONFIG_STM32_OTGFS_DESCSIZE
-CONFIG_STM32_OTGFS_SOFINTR=n
-CONFIG_STM32_USBHOST_REGDEBUG=n
-CONFIG_STM32_USBHOST_PKTDUMP=n
 
 #
-# USB Serial Device Configuration
+# File system configuration
 #
-CONFIG_PL2303=n
-CONFIG_PL2303_EPINTIN=1
-CONFIG_PL2303_EPBULKOUT=2
-CONFIG_PL2303_EPBULKIN=3
-CONFIG_PL2303_NWRREQS=4
-CONFIG_PL2303_NRDREQS=4
-CONFIG_PL2303_VENDORID=0x067b
-CONFIG_PL2303_PRODUCTID=0x2303
-CONFIG_PL2303_VENDORSTR="Nuttx"
-CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
-CONFIG_PL2303_RXBUFSIZE=512
-CONFIG_PL2303_TXBUFSIZE=512
+# CONFIG_DISABLE_MOUNTPOINT is not set
+CONFIG_FS_READABLE=y
+CONFIG_FS_WRITABLE=y
+# CONFIG_FS_RAMMAP is not set
+CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+# CONFIG_FS_FATTIME is not set
+# CONFIG_FAT_DMAMEMORY is not set
+# CONFIG_NFS is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_PROCFS is not set
 
 #
-# USB Storage Device Configuration
+# System Logging
 #
-CONFIG_USBMSC=n
-CONFIG_USBMSC_EP0MAXPACKET=64
-CONFIG_USBMSC_EPBULKOUT=2
-CONFIG_USBMSC_EPBULKIN=5
-CONFIG_USBMSC_NRDREQS=2
-CONFIG_USBMSC_NWRREQS=2
-CONFIG_USBMSC_BULKINREQLEN=256
-CONFIG_USBMSC_BULKOUTREQLEN=256
-CONFIG_USBMSC_VENDORID=0x584e
-CONFIG_USBMSC_VENDORSTR="NuttX"
-CONFIG_USBMSC_PRODUCTID=0x5342
-CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
-CONFIG_USBMSC_VERSIONNO=0x0399
-CONFIG_USBMSC_REMOVABLE=y
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
 
 #
-# Graphics related configuration settings
+# Graphics Support
 #
 CONFIG_NX=y
-CONFIG_NX_MULTIUSER=y
+CONFIG_NX_LCDDRIVER=y
 CONFIG_NX_NPLANES=1
+CONFIG_NX_WRITEONLY=y
+
+#
+# Supported Pixel Depths
+#
 CONFIG_NX_DISABLE_1BPP=y
 CONFIG_NX_DISABLE_2BPP=y
 CONFIG_NX_DISABLE_4BPP=y
 CONFIG_NX_DISABLE_8BPP=y
-CONFIG_NX_DISABLE_16BPP=n
+# CONFIG_NX_DISABLE_16BPP is not set
 CONFIG_NX_DISABLE_24BPP=y
 CONFIG_NX_DISABLE_32BPP=y
-CONFIG_NX_PACKEDMSFIRST=n
-CONFIG_NX_LCDDRIVER=y
-CONFIG_LCD_MAXPOWER=1
-CONFIG_LCD_MAXCONTRAST=1
+# CONFIG_NX_PACKEDMSFIRST is not set
+
+#
+# Input Devices
+#
 CONFIG_NX_MOUSE=y
 CONFIG_NX_KBD=y
-#CONFIG_NXTK_BORDERWIDTH=4
-CONFIG_NXTK_DEFAULT_BORDERCOLORS=n
+
+#
+# Framed Window Borders
+#
+CONFIG_NXTK_BORDERWIDTH=4
+# CONFIG_NXTK_DEFAULT_BORDERCOLORS is not set
 CONFIG_NXTK_BORDERCOLOR1=0x5cb7
 CONFIG_NXTK_BORDERCOLOR2=0x21c9
 CONFIG_NXTK_BORDERCOLOR3=0xffdf
-CONFIG_NXTK_AUTORAISE=n
-CONFIG_NXFONT_SANS17X22=n
-CONFIG_NXFONT_SANS20X26=n
-CONFIG_NXFONT_SANS22X29=n
+# CONFIG_NXTK_AUTORAISE is not set
+
+#
+# Font Selections
+#
+CONFIG_NXFONTS_CHARBITS=7
+# CONFIG_NXFONT_MONO5X8 is not set
+# CONFIG_NXFONT_SANS17X22 is not set
+# CONFIG_NXFONT_SANS20X26 is not set
 CONFIG_NXFONT_SANS23X27=y
-CONFIG_NXFONT_SANS28X37=n
-CONFIG_NXFONT_SANS17X23B=n
-CONFIG_NXFONT_SANS20X27B=n
+# CONFIG_NXFONT_SANS22X29 is not set
+# CONFIG_NXFONT_SANS28X37 is not set
+# CONFIG_NXFONT_SANS39X48 is not set
+# CONFIG_NXFONT_SANS17X23B is not set
+# CONFIG_NXFONT_SANS20X27B is not set
 CONFIG_NXFONT_SANS22X29B=y
-CONFIG_NXFONT_SANS28X37B=n
-CONFIG_NXFONT_SANS40X49B=n
-CONFIG_NXFONT_SERIF22X29=n
-CONFIG_NXFONT_SERIF29X37=n
-CONFIG_NXFONT_SERIF38X48=n
-CONFIG_NXFONT_SERIF22X28B=n
-CONFIG_NXFONT_SERIF27X38B=n
-CONFIG_NXFONT_SERIF38X49B=n
-CONFIG_NXFONTS_CHARBITS=7
+# CONFIG_NXFONT_SANS28X37B is not set
+# CONFIG_NXFONT_SANS40X49B is not set
+# CONFIG_NXFONT_SERIF22X29 is not set
+# CONFIG_NXFONT_SERIF29X37 is not set
+# CONFIG_NXFONT_SERIF38X48 is not set
+# CONFIG_NXFONT_SERIF22X28B is not set
+# CONFIG_NXFONT_SERIF27X38B is not set
+# CONFIG_NXFONT_SERIF38X49B is not set
+CONFIG_NXCONSOLE=y
+
+#
+# NxConsole Output Text/Graphics Options
+#
+CONFIG_NXCONSOLE_BPP=16
+CONFIG_NXCONSOLE_CURSORCHAR=137
+CONFIG_NXCONSOLE_MXCHARS=325
+CONFIG_NXCONSOLE_CACHESIZE=32
+CONFIG_NXCONSOLE_LINESEPARATION=0
+# CONFIG_NXCONSOLE_NOWRAP is not set
+
+#
+# NxConsole Input options
+#
+CONFIG_NXCONSOLE_NXKBDIN=y
+CONFIG_NXCONSOLE_KBDBUFSIZE=16
+CONFIG_NXCONSOLE_NPOLLWAITERS=4
+
+#
+# NX Multi-user only options
+#
+CONFIG_NX_MULTIUSER=y
 CONFIG_NX_BLOCKING=y
 CONFIG_NX_MXSERVERMSGS=32
 CONFIG_NX_MXCLIENTMSGS=16
+# CONFIG_NX_NXSTART is not set
 
 #
-# NxWidgets / NxWM
+# Memory Management
 #
-# Use all defaults except
-# 1. 16 bits-per-pixel
-# 2. Make the NxWidgets background color match the NxWM back color
-# 3. Build in support for keyboard input in NxConsole
-# 4. Taskbar on the left
-# 5. We do have a touchscreen
-# 6. We do want the NxWM keybard listener
-# 7. Use a larger font with the calculator
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+# CONFIG_GRAN is not set
+
 #
-CONFIG_NXWIDGETS_BPP=16
-CONFIG_NXWIDGET_SERVERINIT=y
-CONFIG_NXWIDGETS_SERVERSTACK=2048
-CONFIG_NXWIDGETS_LISTENERSTACK=2048
-CONFIG_NXWIDGETS_DEFAULT_BACKGROUNDCOLOR=MKRGB(148,189,215)
-CONFIG_NXWIDGETS_DEFAULT_SELECTEDBACKGROUNDCOLOR=MKRGB(206,227,241)
-CONFIG_NXWIDGETS_DEFAULT_SHADOWEDGECOLOR=MKRGB(35,58,73)
+# Audio Support
+#
+# CONFIG_AUDIO is not set
 
-CONFIG_NXCONSOLE_NXKBDIN=y
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
+CONFIG_SYMTAB_ORDEREDBYNAME=y
 
-CONFIG_NXWM_TASKBAR_LEFT=y
-CONFIG_NXWM_NXCONSOLE_STACKSIZE=2048
-CONFIG_NXWM_TASKBAR_VSPACING=4
-CONFIG_NXWM_UNITTEST=y
-CONFIG_NXWM_TOUCHSCREEN=y
-CONFIG_NXWM_KEYBOARD=y
-CONFIG_NXWM_HEXCALCULATOR_FONTID=5
+#
+# Library Routines
+#
 
 #
-# NxConsole Configuration Settings:
+# Standard C Library Options
 #
-CONFIG_NXCONSOLE=y
-CONFIG_NXCONSOLE_BPP=16
-CONFIG_NXCONSOLE_MXCHARS=325
-CONFIG_NXCONSOLE_CACHESIZE=32
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
 #
+CONFIG_SCHED_WORKQUEUE=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_WORKPRIORITY=192
+CONFIG_SCHED_WORKPERIOD=50000
+CONFIG_SCHED_WORKSTACKSIZE=2048
+# CONFIG_SCHED_LPWORK is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
 
 #
-# STM3240G-EVAL LCD Hardware Configuration
+# Basic CXX Support
 #
-CONFIG_LCD_NOGETRUN=y
-CONFIG_LCD_LANDSCAPE=y
-CONFIG_LCD_RLANDSCAPE=n
-CONFIG_LCD_PORTRAIT=n
-CONFIG_LCD_RPORTRAIT=n
+# CONFIG_C99_BOOL8 is not set
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
 
 #
-# STM3240G-EVAL specific LCD settings
+# uClibc++ Standard C++ Library
 #
-CONFIG_STM32_ILI9320_DISABLE=n
-CONFIG_STM32_ILI9325_DISABLE=n
+# CONFIG_UCLIBCXX is not set
 
 #
-# Settings for examples/uip
+# Application Configuration
 #
-CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLES_UIP_DHCPC=n
 
 #
-# Settings for examples/nettest
-CONFIG_EXAMPLES_NETTEST_SERVER=n
-CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLES_NETTEST_NOMAC=y
-CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
-CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
-CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
+# Built-In Applications
+#
 
 #
-# Settings for examples/ostest
+# Examples
 #
-CONFIG_EXAMPLES_OSTEST_LOOPS=1
-CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
-CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NETTEST is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_DISCOVER is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+# CONFIG_EXAMPLES_WGET is not set
 
 #
-# Settings for apps/nshlib
+# Graphics Support
 #
-CONFIG_NSH_BUILTIN_APPS=n
+# CONFIG_TIFF is not set
 
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+CONFIG_NETUTILS_RESOLV=y
+CONFIG_NET_RESOLV_ENTRIES=4
+CONFIG_NET_RESOLV_MAXRESPONSE=96
+# CONFIG_NETUTILS_SMTP is not set
+CONFIG_NETUTILS_TELNETD=y
+CONFIG_NETUTILS_TFTPC=y
+# CONFIG_NETUTILS_THTTPD is not set
+CONFIG_NETUTILS_UIPLIB=y
+CONFIG_NETUTILS_WEBCLIENT=y
+CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
+# CONFIG_NETUTILS_WEBSERVER is not set
+# CONFIG_NETUTILS_DISCOVER is not set
+# CONFIG_NETUTILS_XMLRPC is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_ADDROUTE is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_DELROUTE is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_NSFMOUNT is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+# CONFIG_NSH_CMDOPT_DF_H is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
 CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
 CONFIG_NSH_LINELEN=64
+CONFIG_NSH_MAXARGUMENTS=6
 CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=n
-CONFIG_NSH_DISABLEBG=n
-CONFIG_NSH_ROMFSETC=n
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLEBG is not set
 CONFIG_NSH_CONSOLE=y
-#CONFIG_NSH_CONDEV="/dev/ttyS1"
+
+#
+# USB Trace Support
+#
+# CONFIG_NSH_CONDEV is not set
+# CONFIG_NSH_ARCHINIT is not set
 CONFIG_NSH_TELNET=y
-CONFIG_NSH_ARCHINIT=n
+CONFIG_NSH_TELNETD_PORT=23
+CONFIG_NSH_TELNETD_DAEMONPRIO=100
+CONFIG_NSH_TELNETD_DAEMONSTACKSIZE=2048
+CONFIG_NSH_TELNETD_CLIENTPRIO=100
+CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048
 CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=y
+# CONFIG_NSH_TELNET_LOGIN is not set
 CONFIG_NSH_IPADDR=0x0a000002
 CONFIG_NSH_DRIPADDR=0x0a000001
 CONFIG_NSH_NETMASK=0xffffff00
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT="/tmp"
+CONFIG_NSH_NOMAC=y
+CONFIG_NSH_MAX_ROUNDTRIP=20
 
 #
-# Architecture-specific NSH options
+# NxWidgets/NxWM
 #
-CONFIG_NSH_MMCSDSPIPORTNO=0
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
+CONFIG_NXWIDGETS=y
 
 #
-# I2C tool settings
+# NX Server/Device Configuration
 #
-CONFIG_I2CTOOL_MINBUS=1
-CONFIG_I2CTOOL_MAXBUS=3
-#CONFIG_I2CTOOL_MINADDR
-#CONFIG_I2CTOOL_MAXADDR
-#CONFIG_I2CTOOL_MAXREGADDR
-CONFIG_I2CTOOL_DEFFREQ=100000
+CONFIG_NXWIDGETS_FLICKERFREE=y
+# CONFIG_NXWIDGETS_EXTERNINIT is not set
+CONFIG_NXWIDGETS_DEVNO=0
+CONFIG_NXWIDGET_SERVERINIT=y
+CONFIG_NXWIDGETS_SERVERPRIO=110
+CONFIG_NXWIDGETS_SERVERSTACK=2048
+CONFIG_NXWIDGETS_CLIENTPRIO=100
+CONFIG_NXWIDGETS_LISTENERPRIO=100
+CONFIG_NXWIDGETS_LISTENERSTACK=2048
+# CONFIG_NXWIDGET_EVENTWAIT is not set
 
 #
-# Settings for examples/usbserial
+# NXWidget Configuration
 #
-CONFIG_EXAMPLES_USBSERIAL_INONLY=n
-CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+CONFIG_NXWIDGETS_BPP=16
+CONFIG_NXWIDGETS_SIZEOFCHAR=1
 
-CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
-CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+#
+# NXWidget Default Values
+#
+# CONFIG_NXWIDGETS_SYSTEM_CUSTOM_FONTID is not set
+CONFIG_NXWIDGETS_TNXARRAY_INITIALSIZE=16
+CONFIG_NXWIDGETS_TNXARRAY_SIZEINCREMENT=8
+CONFIG_NXWIDGETS_CUSTOM_FILLCOLORS=y
+CONFIG_NXWIDGETS_DEFAULT_BACKGROUNDCOLOR=0x9dfb
+CONFIG_NXWIDGETS_DEFAULT_SELECTEDBACKGROUNDCOLOR=0xd73e
+CONFIG_NXWIDGETS_DEFAULT_HIGHLIGHTCOLOR=0xc618
+CONFIG_NXWIDGETS_CUSTOM_EDGECOLORS=y
+CONFIG_NXWIDGETS_DEFAULT_SHINEEDGECOLOR=0xffdf
+CONFIG_NXWIDGETS_DEFAULT_SHADOWEDGECOLOR=0x21e9
+# CONFIG_NXWIDGETS_CUSTOM_TEXTCOLORS is not set
+CONFIG_NXWIDGETS_TRANSPARENT_COLOR=0x0
 
 #
-# Settings for examples/adc
+# Keypad behavior
 #
+CONFIG_NXWIDGETS_FIRST_REPEAT_TIME=500
+CONFIG_NXWIDGETS_CONTINUE_REPEAT_TIME=200
+CONFIG_NXWIDGETS_DOUBLECLICK_TIME=350
+CONFIG_NXWIDGETS_KBDBUFFER_SIZE=16
+CONFIG_NXWIDGETS_CURSORCONTROL_SIZE=4
+# CONFIG_NXWIDGET_MEMMONITOR is not set
+CONFIG_NXWM=y
 
 #
-# Settings for examples/can
+# NxWM General settings
 #
+# CONFIG_NXWM_SYSTEM_CUSTOM_FONTID is not set
+CONFIG_NXWM_UNITTEST=y
 
 #
-# Settings for examples/nx
+# Color configuration
 #
-CONFIG_EXAMPLES_NX_VPLANE=0
-CONFIG_EXAMPLES_NX_DEVNO=0
-CONFIG_EXAMPLES_NX_BGCOLOR=0x0011
-CONFIG_EXAMPLES_NX_COLOR1=0xaedc
-CONFIG_EXAMPLES_NX_COLOR2=0xe7ff
-CONFIG_EXAMPLES_NX_TBCOLOR=0xd69a
-CONFIG_EXAMPLES_NX_FONTID=0
-CONFIG_EXAMPLES_NX_FONTCOLOR=0x0000
-CONFIG_EXAMPLES_NX_BPP=16
-CONFIG_EXAMPLES_NX_RAWWINDOWS=n
-CONFIG_EXAMPLES_NX_STACKSIZE=2048
-CONFIG_EXAMPLES_NX_CLIENTPRIO=80
-CONFIG_EXAMPLES_NX_SERVERPRIO=120
-CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4
-CONFIG_EXAMPLES_NX_EXTERNINIT=n
+# CONFIG_NXWM_CUSTOM_FILLCOLORS is not set
+# CONFIG_NXWM_CUSTOM_EDGECOLORS is not set
+# CONFIG_NXWM_CUSTOM_TEXTCOLORS is not set
 
 #
-# Settings for examples/nxhello
+# Background Image
 #
-CONFIG_EXAMPLES_NXHELLO_VPLANE=0
-CONFIG_EXAMPLES_NXHELLO_DEVNO=0
-CONFIG_EXAMPLES_NXHELLO_BGCOLOR=0x0011
-CONFIG_EXAMPLES_NXHELLO_FONTID=6
-CONFIG_EXAMPLES_NXHELLO_FONTCOLOR=0xffdf
-CONFIG_EXAMPLES_NXHELLO_BPP=16
-CONFIG_EXAMPLES_NXHELLO_EXTERNINIT=n
+# CONFIG_NXWM_DISABLE_BACKGROUND_IMAGE is not set
+CONFIG_NXWM_BACKGROUND_IMAGE="NXWidgets::g_nuttxBitmap160x160"
 
 #
-# Settings for examples/nximage
+# NxWM Taskbar Configuration
 #
-CONFIG_EXAMPLES_NXIMAGE_VPLANE=0
-CONFIG_EXAMPLES_NXIMAGE_DEVNO=0
-CONFIG_EXAMPLES_NXIMAGE_BPP=16
-CONFIG_EXAMPLES_NXIMAGE_XSCALEp5=n
-CONFIG_EXAMPLES_NXIMAGE_XSCALE1p5=y
-CONFIG_EXAMPLES_NXIMAGE_XSCALE2p0=n
-CONFIG_EXAMPLES_NXIMAGE_YSCALEp5=n
-CONFIG_EXAMPLES_NXIMAGE_YSCALE1p5=y
-CONFIG_EXAMPLES_NXIMAGE_YSCALE2p0=n
-CONFIG_EXAMPLES_NXIMAGE_EXTERNINIT=n
 
 #
-# Settings for examples/nxlines
+# Horizontal and vertical spacing of icons in the task bar
 #
-CONFIG_EXAMPLES_NXLINES_VPLANE=0
-CONFIG_EXAMPLES_NXLINES_DEVNO=0
-CONFIG_EXAMPLES_NXLINES_BGCOLOR=0x0320
-CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16
-CONFIG_EXAMPLES_NXLINES_LINECOLOR=0xffe0
-CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=4
-CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0xffe0
-CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0xf7bb
-CONFIG_EXAMPLES_NXLINES_BPP=16
-CONFIG_EXAMPLES_NXLINES_EXTERNINIT=n
+CONFIG_NXWM_TASKBAR_VSPACING=4
+CONFIG_NXWM_TASKBAR_HSPACING=2
+# CONFIG_NXWM_TASKBAR_TOP is not set
+# CONFIG_NXWM_TASKBAR_BOTTOM is not set
+CONFIG_NXWM_TASKBAR_LEFT=y
+# CONFIG_NXWM_TASKBAR_RIGHT is not set
+# CONFIG_NXWM_CUSTOM_TASKBAR_WIDTH is not set
+# CONFIG_NXWM_TASKBAR_ICONSCALE is not set
+# CONFIG_NXWM_DISABLE_MINIMIZE is not set
+# CONFIG_NXWM_TASKBAR_NO_BORDER is not set
 
 #
-# Settings for examples/touchscreen
+# NxWM Toolbar Configuration
 #
-CONFIG_EXAMPLES_TOUCHSCREEN_MINOR=0
-CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH="/dev/input0"
-CONFIG_EXAMPLES_TOUCHSCREEN_NSAMPLES=25
+# CONFIG_NXWM_CUSTOM_TOOLBAR_HEIGHT is not set
 
 #
-# Settings for system/usbmsc
+# NxWM Application Window Configuration
 #
-CONFIG_SYSTEM_USBMSC_NLUNS=1
-CONFIG_SYSTEM_USBMSC_DEVMINOR1=0
-CONFIG_SYSTEM_USBMSC_DEVPATH1="/dev/mmcsd0"
-CONFIG_SYSTEM_USBMSC_DEBUGMM=n
-CONFIG_SYSTEM_USBMSC_TRACEINIT=n
-CONFIG_SYSTEM_USBMSC_TRACECLASS=n
-CONFIG_SYSTEM_USBMSC_TRACETRANSFERS=n
-CONFIG_SYSTEM_USBMSC_TRACECONTROLLER=n
-CONFIG_SYSTEM_USBMSC_TRACEINTERRUPTS=n
+# CONFIG_NXWM_CUSTOM_APPWINDOW_ICONS is not set
 
 #
-# Settings for examples/watchdog
+# NxWM Start Window Configuration
+#
+
 #
-# This test depends on these specific Watchdog/NSH configurations settings (your
-# specific watchdog hardware settings might require additional settings).
+# Horizontal and vertical spacing of icons in the task bar
 #
+CONFIG_NXWM_STARTWINDOW_VSPACING=4
+CONFIG_NXWM_STARTWINDOW_HSPACING=4
+# CONFIG_NXWM_CUSTOM_STARTWINDOW_ICON is not set
+CONFIG_NXWM_STARTWINDOW_MQNAME="/dev/nxwm"
+CONFIG_NXWM_STARTWINDOW_MXMSGS=32
+CONFIG_NXWM_STARTWINDOW_MXMPRIO=42
+CONFIG_NXWM_STARTWINDOW_PRIO=100
+CONFIG_NXWM_STARTWINDOW_STACKSIZE=2048
 
 #
-# Settings for examples/pwm
+# NxConsole Window Configuration
 #
+CONFIG_NXWM_NXCONSOLE_PRIO=100
+CONFIG_NXWM_NXCONSOLE_STACKSIZE=2048
+# CONFIG_NXWM_NXCONSOLE_CUSTOM_COLORS is not set
+# CONFIG_NXWM_NXCONSOLE_CUSTOM_FONTID is not set
+# CONFIG_NXWM_CUSTOM_NXCONSOLE_ICON is not set
 
 #
-# Settings for examples/ftpd
+# NxWM Touchscreen Configuration
 #
+CONFIG_NXWM_TOUCHSCREEN=y
 
 #
-# Stack and heap information
+# Touchscreen device settings
 #
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=1024
-CONFIG_USERMAIN_STACKSIZE=2048
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_NXWM_TOUCHSCREEN_DEVNO=0
+CONFIG_NXWM_TOUCHSCREEN_DEVPATH="/dev/input0"
+CONFIG_NXWM_TOUCHSCREEN_SIGNO=5
+CONFIG_NXWM_TOUCHSCREEN_LISTENERPRIO=100
+CONFIG_NXWM_TOUCHSCREEN_LISTENERSTACK=1024
+
+#
+# NxWM Keyboard Configuration
+#
+CONFIG_NXWM_KEYBOARD=y
+
+#
+# Keyboard device settings
+#
+CONFIG_NXWM_KEYBOARD_DEVPATH="/dev/console"
+CONFIG_NXWM_KEYBOARD_SIGNO=6
+CONFIG_NXWM_KEYBOARD_BUFSIZE=16
+CONFIG_NXWM_KEYBOARD_LISTENERPRIO=100
+CONFIG_NXWM_KEYBOARD_LISTENERSTACK=2048
+
+#
+# NxWM Calibration display settings
+#
+CONFIG_NXWM_CALIBRATION_MARGIN=40
+# CONFIG_NXWM_CALIBRATION_CUSTOM_COLORS is not set
+# CONFIG_NXWM_CALIBRATION_MESSAGES is not set
+# CONFIG_NXWM_CALIBRATION_ANISOTROPIC is not set
+# CONFIG_NXWM_CUSTOM_CALIBRATION_ICON is not set
+CONFIG_NXWM_CALIBRATION_SIGNO=5
+CONFIG_NXWM_CALIBRATION_LISTENERPRIO=100
+CONFIG_NXWM_CALIBRATION_LISTENERSTACK=2048
+
+#
+# NxWM Hex Calculator display settings
+#
+# CONFIG_NXWM_HEXCALCULATOR_CUSTOM_COLORS is not set
+# CONFIG_NXWM_CUSTOM_HEXCALCULATOR_ICON is not set
+CONFIG_NXWM_HEXCALCULATOR_CUSTOM_FONTID=y
+CONFIG_NXWM_HEXCALCULATOR_FONTID=5
+# CONFIG_NXWM_MEDIAPLAYER is not set
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System NSH Add-Ons
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+# CONFIG_SYSTEM_I2CTOOL is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/stm3240g-eval/scripts/kernel-space.ld b/nuttx/configs/stm3240g-eval/scripts/kernel-space.ld
new file mode 100755
index 000000000..12acb943d
--- /dev/null
+++ b/nuttx/configs/stm3240g-eval/scripts/kernel-space.ld
@@ -0,0 +1,109 @@
+/****************************************************************************
+ * configs/stm3240g-eval/scripts/kernel-space.ld
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* NOTE:  This depends on the memory.ld script having been included prior to
+ * this script.
+ */
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+    .text : {
+        _stext = ABSOLUTE(.);
+        *(.vectors)
+        *(.text .text.*)
+        *(.fixup)
+        *(.gnu.warning)
+        *(.rodata .rodata.*)
+        *(.gnu.linkonce.t.*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.got)
+        *(.gcc_except_table)
+        *(.gnu.linkonce.r.*)
+        _etext = ABSOLUTE(.);
+    } > kflash
+
+    .init_section : {
+        _sinit = ABSOLUTE(.);
+        *(.init_array .init_array.*)
+        _einit = ABSOLUTE(.);
+    } > kflash
+
+    .ARM.extab : {
+        *(.ARM.extab*)
+    } > kflash
+
+    __exidx_start = ABSOLUTE(.);
+    .ARM.exidx : {
+        *(.ARM.exidx*)
+    } > kflash
+
+    __exidx_end = ABSOLUTE(.);
+
+    _eronly = ABSOLUTE(.);
+
+    .data : {
+        _sdata = ABSOLUTE(.);
+        *(.data .data.*)
+        *(.gnu.linkonce.d.*)
+        CONSTRUCTORS
+        _edata = ABSOLUTE(.);
+    } > ksram AT > kflash
+
+    .bss : {
+        _sbss = ABSOLUTE(.);
+        *(.bss .bss.*)
+        *(.gnu.linkonce.b.*)
+        *(COMMON)
+        _ebss = ABSOLUTE(.);
+    } > ksram
+
+    /* Stabs debugging sections */
+
+    .stab 0 : { *(.stab) }
+    .stabstr 0 : { *(.stabstr) }
+    .stab.excl 0 : { *(.stab.excl) }
+    .stab.exclstr 0 : { *(.stab.exclstr) }
+    .stab.index 0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment 0 : { *(.comment) }
+    .debug_abbrev 0 : { *(.debug_abbrev) }
+    .debug_info 0 : { *(.debug_info) }
+    .debug_line 0 : { *(.debug_line) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/nuttx/configs/stm3240g-eval/scripts/ld.script b/nuttx/configs/stm3240g-eval/scripts/ld.script
index e319a896a..2e3de10a6 100644
--- a/nuttx/configs/stm3240g-eval/scripts/ld.script
+++ b/nuttx/configs/stm3240g-eval/scripts/ld.script
@@ -33,7 +33,7 @@
  *
  ****************************************************************************/
 
-/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
+/* The STM32F407VG has 1024Kb of FLASH beginning at address 0x0800:0000 and
  * 192Kb of SRAM. SRAM is split up into three blocks:
  *
  * 1) 112Kb of SRAM beginning at address 0x2000:0000
diff --git a/nuttx/configs/stm3240g-eval/scripts/memory.ld b/nuttx/configs/stm3240g-eval/scripts/memory.ld
new file mode 100644
index 000000000..3ae5e1636
--- /dev/null
+++ b/nuttx/configs/stm3240g-eval/scripts/memory.ld
@@ -0,0 +1,100 @@
+/****************************************************************************
+ * configs/stm3240-eval/scripts/memory.ld
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F407VG has 1024Kb of FLASH beginning at address 0x0800:0000 and
+ * 192Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112KB of SRAM beginning at address 0x2000:0000
+ * 2)  16KB of SRAM beginning at address 0x2001:c000
+ * 3)  64KB of CCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * For MPU support, the kernel-mode NuttX section is assumed to be 128Kb of
+ * FLASH and 4Kb of SRAM.  That is an excessive amount for the kernel which
+ * should fit into 64KB and, of course, can be optimized as needed (See
+ * also configs/stm3240g-eval/scripts/kernel-space.ld).  Allowing the
+ * additional does permit addition debug instrumentation to be added to the
+ * kernel space without overflowing the partition.
+ *
+ * Alignment of the user space FLASH partition is also a critical factor:
+ * The user space FLASH partition will be spanned with a single region of
+ * size 2**n bytes.  The alignment of the user-space region must be the same.
+ * As a consequence, as the user-space increases in size, the alignmment
+ * requirement also increases.
+ *
+ * This alignment requirement means that the largest user space FLASH region
+ * you can have will be 512KB at it would have to be positioned at
+ * 0x08800000.  If you change this address, don't forget to change the
+ * CONFIG_NUTTX_USERSPACE configuration setting to match and to modify
+ * the check in kernel/userspace.c.
+ *
+ * For the same reasons, the maximum size of the SRAM mapping is limited to
+ * 4KB.  Both of these alignment limitations could be reduced by using
+ * multiple regions to map the FLASH/SDRAM range or perhaps with some
+ * clever use of subregions.
+ *
+ * A detailed memory map for the 112KB SRAM region is as follows:
+ *
+ *   0x20000 0000:  Kernel .data region.  Typical size: 0.1KB
+ *   ------- ----   Kernel .bss  region.  Typical size: 1.8KB
+ *   0x20000 0800:  Kernel IDLE thread stack (approximate).  Size is
+ *                  determined by CONFIG_IDLETHREAD_STACKSIZE and
+ *                  adjustments for alignment.  Typical is 1KB.
+ *   ------- ----   Padded to 4KB
+ *   0x20000 1000:  User .data region.  Size is variable.
+ *   ------- ----   User .bss region  Size is variable.
+ *   0x20000 2000:  Beginning of kernel heap.  Size determined by
+ *                  CONFIG_MM_KERNEL_HEAPSIZE.
+ *   ------- ----   Beginning of user heap.  Can vary with other settings.
+ *   0x20001 c000:  End+1 of CPU RAM
+ */
+
+MEMORY
+{
+    /* 1024Kb FLASH */
+
+    kflash (rx)      : ORIGIN = 0x08000000, LENGTH = 128K
+    uflash (rx)      : ORIGIN = 0x08020000, LENGTH = 128K
+    xflash (rx)      : ORIGIN = 0x08040000, LENGTH = 768K
+
+    /* 112Kb of contiguous SRAM */
+
+    ksram (rwx)      : ORIGIN = 0x20000000, LENGTH = 4K
+    usram (rwx)      : ORIGIN = 0x20001000, LENGTH = 4K
+    xsram (rwx)      : ORIGIN = 0x20001000, LENGTH = 104K
+}
diff --git a/nuttx/configs/stm3240g-eval/scripts/user-space.ld b/nuttx/configs/stm3240g-eval/scripts/user-space.ld
new file mode 100644
index 000000000..30dc32835
--- /dev/null
+++ b/nuttx/configs/stm3240g-eval/scripts/user-space.ld
@@ -0,0 +1,126 @@
+/****************************************************************************
+ * configs/stm3240g-eval/scripts/user-space.ld
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* NOTE:  This depends on the memory.ld script having been included prior to
+ * this script.
+ */
+
+/* Make sure that the critical memory management functions are in user-space.
+ * the user heap memory manager will reside in user-space but be usable both
+ * by kernel- and user-space code
+ */
+
+EXTERN(umm_initialize)
+EXTERN(umm_addregion)
+EXTERN(umm_trysemaphore)
+EXTERN(umm_givesemaphore)
+
+EXTERN(malloc)
+EXTERN(realloc)
+EXTERN(zalloc)
+EXTERN(free)
+
+OUTPUT_ARCH(arm)
+SECTIONS
+{
+    .userspace : {
+        *(.userspace)
+    } > uflash
+
+    .text : {
+        _stext = ABSOLUTE(.);
+        *(.text .text.*)
+        *(.fixup)
+        *(.gnu.warning)
+        *(.rodata .rodata.*)
+        *(.gnu.linkonce.t.*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.got)
+        *(.gcc_except_table)
+        *(.gnu.linkonce.r.*)
+        _etext = ABSOLUTE(.);
+    } > uflash
+
+    .init_section : {
+        _sinit = ABSOLUTE(.);
+        *(.init_array .init_array.*)
+        _einit = ABSOLUTE(.);
+    } > uflash
+
+    .ARM.extab : {
+        *(.ARM.extab*)
+    } > uflash
+
+    __exidx_start = ABSOLUTE(.);
+    .ARM.exidx : {
+        *(.ARM.exidx*)
+    } > uflash
+
+    __exidx_end = ABSOLUTE(.);
+
+    _eronly = ABSOLUTE(.);
+
+    .data : {
+        _sdata = ABSOLUTE(.);
+        *(.data .data.*)
+        *(.gnu.linkonce.d.*)
+        CONSTRUCTORS
+        _edata = ABSOLUTE(.);
+    } > usram AT > uflash
+
+    .bss : {
+        _sbss = ABSOLUTE(.);
+        *(.bss .bss.*)
+        *(.gnu.linkonce.b.*)
+        *(COMMON)
+        _ebss = ABSOLUTE(.);
+    } > usram
+
+    /* Stabs debugging sections */
+
+    .stab 0 : { *(.stab) }
+    .stabstr 0 : { *(.stabstr) }
+    .stab.excl 0 : { *(.stab.excl) }
+    .stab.exclstr 0 : { *(.stab.exclstr) }
+    .stab.index 0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment 0 : { *(.comment) }
+    .debug_abbrev 0 : { *(.debug_abbrev) }
+    .debug_info 0 : { *(.debug_info) }
+    .debug_line 0 : { *(.debug_line) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/nuttx/configs/stm3240g-eval/src/stm3240g-internal.h b/nuttx/configs/stm3240g-eval/src/stm3240g-internal.h
index cef4d2d19..8db3def21 100644
--- a/nuttx/configs/stm3240g-eval/src/stm3240g-internal.h
+++ b/nuttx/configs/stm3240g-eval/src/stm3240g-internal.h
@@ -1,8 +1,7 @@
 /****************************************************************************************************
  * configs/stm3240g_eval/src/stm3240g_internal.h
- * arch/arm/src/board/stm3240g_internal.n
  *
- *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -70,8 +69,8 @@
 
 /* You can't use CAN1 with FSMC:
  *
- *   PD0   = FSMC_D2 & CAN1_RX   
- *   PD1   = FSMC_D3 & CAN1_TX  
+ *   PD0   = FSMC_D2 & CAN1_RX
+ *   PD1   = FSMC_D3 & CAN1_TX
  */
 
 #if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_FSMC)
@@ -127,7 +126,7 @@
 #  endif
 #endif
 
-/* USB OTG FS 
+/* USB OTG FS
  *
  * PA9  VBUS_FS
  * PH5  OTG_FS_PowerSwitchOn
@@ -145,7 +144,7 @@
 
 /* The STM3240G-EVAL has two STMPE811QTR I/O expanders on board both connected
  * to the STM32 via I2C1.  They share a common interrupt line: PI2.
- * 
+ *
  * STMPE811 U24, I2C address 0x41 (7-bit)
  * ------ ---- ---------------- --------------------------------------------
  * STPE11 PIN  BOARD SIGNAL     BOARD CONNECTION
@@ -158,7 +157,7 @@
  *   IN2       EXP_IO10
  *   IN1       EXP_IO11
  *   IN0       EXP_IO12
- * 
+ *
  * STMPE811 U29, I2C address 0x44 (7-bit)
  * ------ ---- ---------------- --------------------------------------------
  * STPE11 PIN  BOARD SIGNAL     BOARD CONNECTION
@@ -307,7 +306,7 @@ void stm32_disablefsmc(void);
  * Name: stm32_selectsram
  *
  * Description:
- *   Initialize to access external SRAM.  SRAM will be visible at the FSMC Bank 
+ *   Initialize to access external SRAM.  SRAM will be visible at the FSMC Bank
  *   NOR/SRAM2 base address (0x64000000)
  *
  *   General transaction rules.  The requested AHB transaction data size can be 8-,
@@ -369,5 +368,24 @@ void stm32_selectlcd(void);
 void stm32_deselectlcd(void);
 #endif
 
+/****************************************************************************
+ * Name: nsh_archinitialize
+ *
+ * Description:
+ *   Perform architecture specific initialization for NSH.
+ *
+ *   CONFIG_NSH_ARCHINIT=y :
+ *     Called from the NSH library
+ *
+ *   CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, &&
+ *   CONFIG_NSH_ARCHINIT=n :
+ *     Called from board_initialize().
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_NSH_LIBRARY
+int nsh_archinitialize(void);
+#endif
+
 #endif /* __ASSEMBLY__ */
 #endif /* __CONFIGS_STM3240G_EVAL_SRC_STM3240G_INTERNAL_H */
diff --git a/nuttx/configs/stm3240g-eval/src/up_boot.c b/nuttx/configs/stm3240g-eval/src/up_boot.c
index 518bb4ff7..e32cdcd74 100644
--- a/nuttx/configs/stm3240g-eval/src/up_boot.c
+++ b/nuttx/configs/stm3240g-eval/src/up_boot.c
@@ -1,8 +1,7 @@
 /************************************************************************************
  * configs/stm3240g-eval/src/up_boot.c
- * arch/arm/src/board/up_boot.c
  *
- *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -89,11 +88,11 @@ void stm32_boardinitialize(void)
 #endif
 
   /* Initialize USB if the 1) OTG FS controller is in the configuration and 2)
-   * disabled, and 3) the weak function stm32_usbinitialize() has been brought 
+   * disabled, and 3) the weak function stm32_usbinitialize() has been brought
    * the weak function stm32_usbinitialize() has been brought into the build.
    * Presumeably either CONFIG_USBDEV or CONFIG_USBHOST is also selected.
    */
- 
+
 #ifdef CONFIG_STM32_OTGFS
   if (stm32_usbinitialize)
     {
@@ -107,3 +106,30 @@ void stm32_boardinitialize(void)
   up_ledinit();
 #endif
 }
+/****************************************************************************
+ * Name: board_initialize
+ *
+ * Description:
+ *   If CONFIG_BOARD_INITIALIZE is selected, then an additional
+ *   initialization call will be performed in the boot-up sequence to a
+ *   function called board_initialize().  board_initialize() will be
+ *   called immediately after up_intiialize() is called and just before the
+ *   initial application is started.  This additional initialization phase
+ *   may be used, for example, to initialize board-specific device drivers.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_BOARD_INITIALIZE
+void board_initialize(void)
+{
+  /* Perform NSH initialization here instead of from the NSH.  This
+   * alternative NSH initialization is necessary when NSH is ran in user-space
+   * but the initialization function must run in kernel space.
+   */
+
+#if defined(CONFIG_NSH_LIBRARY) && !defined(CONFIG_NSH_ARCHINIT)
+  (void)nsh_archinitialize();
+#endif
+}
+#endif
+