diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-08-29 17:41:43 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-08-29 17:41:43 +0000 |
commit | 4ab6aa6277637cc6f843576f76e69fbaebcc0bd7 (patch) | |
tree | d90f979ad9399dec4b848831cc6a97b81caae3c0 /nuttx/configs/stm32f4discovery/src/up_usb.c | |
parent | d9124e9c61ffb51027645a4048f3aa24ab91c05d (diff) | |
download | px4-nuttx-4ab6aa6277637cc6f843576f76e69fbaebcc0bd7.tar.gz px4-nuttx-4ab6aa6277637cc6f843576f76e69fbaebcc0bd7.tar.bz2 px4-nuttx-4ab6aa6277637cc6f843576f76e69fbaebcc0bd7.zip |
Add USB host support to the STM32F4Discovery board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5066 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/configs/stm32f4discovery/src/up_usb.c')
-rw-r--r-- | nuttx/configs/stm32f4discovery/src/up_usb.c | 292 |
1 files changed, 292 insertions, 0 deletions
diff --git a/nuttx/configs/stm32f4discovery/src/up_usb.c b/nuttx/configs/stm32f4discovery/src/up_usb.c new file mode 100644 index 000000000..d4250bc2f --- /dev/null +++ b/nuttx/configs/stm32f4discovery/src/up_usb.c @@ -0,0 +1,292 @@ +/************************************************************************************ + * configs/stm32f4discovery/src/up_usbdev.c + * arch/arm/src/board/up_boot.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#include <sys/types.h> +#include <stdint.h> +#include <stdbool.h> +#include <sched.h> +#include <errno.h> +#include <debug.h> + +#include <nuttx/usb/usbdev.h> +#include <nuttx/usb/usbhost.h> +#include <nuttx/usb/usbdev_trace.h> + +#include "up_arch.h" +#include "stm32_internal.h" +#include "stm32f4discovery-internal.h" + +#ifdef CONFIG_STM32_OTGFS + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +#if defined(CONFIG_USBDEV) || defined(CONFIG_USBHOST) +# define HAVE_USB 1 +#else +# warning "CONFIG_STM32_OTGFS is enabled but neither CONFIG_USBDEV nor CONFIG_USBHOST" +# undef HAVE_USB +#endif + +#ifndef CONFIG_USBHOST_DEFPRIO +# define CONFIG_USBHOST_DEFPRIO 50 +#endif + +#ifndef CONFIG_USBHOST_STACKSIZE +# define CONFIG_USBHOST_STACKSIZE 1024 +#endif + +/************************************************************************************ + * Private Data + ************************************************************************************/ + +#ifdef CONFIG_USBHOST +static struct usbhost_driver_s *g_drvr; +#endif + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: usbhost_waiter + * + * Description: + * Wait for USB devices to be connected. + * + ************************************************************************************/ + +#ifdef CONFIG_USBHOST +static int usbhost_waiter(int argc, char *argv[]) +{ + bool connected = false; + int ret; + + uvdbg("Running\n"); + for (;;) + { + /* Wait for the device to change state */ + + ret = DRVR_WAIT(g_drvr, connected); + DEBUGASSERT(ret == OK); + + connected = !connected; + uvdbg("%s\n", connected ? "connected" : "disconnected"); + + /* Did we just become connected? */ + + if (connected) + { + /* Yes.. enumerate the newly connected device */ + + (void)DRVR_ENUMERATE(g_drvr); + } + } + + /* Keep the compiler from complaining */ + + return 0; +} +#endif + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_usbinitialize + * + * Description: + * Called from stm32_usbinitialize very early in inialization to setup USB-related + * GPIO pins for the STM32F4Discovery board. + * + ************************************************************************************/ + +void stm32_usbinitialize(void) +{ + /* The OTG FS has an internal soft pull-up. No GPIO configuration is required */ + + /* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */ + +#ifdef CONFIG_STM32_OTGFS + stm32_configgpio(GPIO_OTGFS_VBUS); + stm32_configgpio(GPIO_OTGFS_PWRON); + stm32_configgpio(GPIO_OTGFS_OVER); +#endif +} + +/*********************************************************************************** + * Name: stm32_usbhost_initialize + * + * Description: + * Called at application startup time to initialize the USB host functionality. + * This function will start a thread that will monitor for device + * connection/disconnection events. + * + ***********************************************************************************/ + +#ifdef CONFIG_USBHOST +int stm32_usbhost_initialize(void) +{ + int pid; + int ret; + + /* First, register all of the class drivers needed to support the drivers + * that we care about: + */ + + uvdbg("Register class drivers\n"); + ret = usbhost_storageinit(); + if (ret != OK) + { + udbg("Failed to register the mass storage class\n"); + } + + /* Then get an instance of the USB host interface */ + + uvdbg("Initialize USB host\n"); + g_drvr = usbhost_initialize(0); + if (g_drvr) + { + /* Start a thread to handle device connection. */ + + uvdbg("Start usbhost_waiter\n"); + + pid = TASK_CREATE("usbhost", CONFIG_USBHOST_DEFPRIO, + CONFIG_USBHOST_STACKSIZE, + (main_t)usbhost_waiter, (const char **)NULL); + return pid < 0 ? -ENOEXEC : OK; + } + + return -ENODEV; +} +#endif + +/*********************************************************************************** + * Name: stm32_usbhost_vbusdrive + * + * Description: + * Enable/disable driving of VBUS 5V output. This function must be provided be + * each platform that implements the STM32 OTG FS host interface + * + * "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump + * or, if 5 V are available on the application board, a basic power switch, must + * be added externally to drive the 5 V VBUS line. The external charge pump can + * be driven by any GPIO output. When the application decides to power on VBUS + * using the chosen GPIO, it must also set the port power bit in the host port + * control and status register (PPWR bit in OTG_FS_HPRT). + * + * "The application uses this field to control power to this port, and the core + * clears this bit on an overcurrent condition." + * + * Input Parameters: + * iface - For future growth to handle multiple USB host interface. Should be zero. + * enable - true: enable VBUS power; false: disable VBUS power + * + * Returned Value: + * None + * + ***********************************************************************************/ + +#ifdef CONFIG_USBHOST +void stm32_usbhost_vbusdrive(int iface, bool enable) +{ + DEBUGASSERT(iface == 0); + + if (enable) + { + /* Enable the Power Switch by driving the enable pin low */ + + stm32_gpiowrite(GPIO_OTGFS_PWRON, false); + } + else + { + /* Disable the Power Switch by driving the enable pin high */ + + stm32_gpiowrite(GPIO_OTGFS_PWRON, true); + } +} +#endif + +/************************************************************************************ + * Name: stm32_setup_overcurrent + * + * Description: + * Setup to receive an interrupt-level callback if an overcurrent condition is + * detected. + * + * Input paramter: + * handler - New overcurrent interrupt handler + * + * Returned value: + * Old overcurrent interrupt handler + * + ************************************************************************************/ + +#ifdef CONFIG_USBHOST +xcpt_t stm32_setup_overcurrent(xcpt_t handler) +{ + return stm32_gpiosetevent(GPIO_OTGFS_OVER, true, true, true, handler); +} +#endif + +/************************************************************************************ + * Name: stm32_usbsuspend + * + * Description: + * Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is + * used. This function is called whenever the USB enters or leaves suspend mode. + * This is an opportunity for the board logic to shutdown clocks, power, etc. + * while the USB is suspended. + * + ************************************************************************************/ + +void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume) +{ + ulldbg("resume: %d\n", resume); +} + +#endif /* CONFIG_STM32_OTGFS */ + + + |