Verify that z8 targets still build (under Cygwin)

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5396 42af7a65-404d-4744-a932-0658087f49c3

4 files changed, 247 insertions, 76 deletions

diff --git a/nuttx/configs/z8encore000zco/README.txt b/nuttx/configs/z8encore000zco/README.txt
index 9abc06f05..d37ee2302 100644
--- a/nuttx/configs/z8encore000zco/README.txt
+++ b/nuttx/configs/z8encore000zco/README.txt
@@ -4,7 +4,7 @@ README.txt
 ZDS-II Compiler Versions
 ^^^^^^^^^^^^^^^^^^^^^^^^
 
-4.10.1
+Version 4.10.1
   The ZDS-II version 4.10.2 will not compile NuttX.  It reports "internal
   errors" on one of the files, mm/mm_initialize.c.  Below is a simple work-
   around.  With this work-around in place, NuttX builds successfully with
@@ -23,12 +23,23 @@ ZDS-II Compiler Versions
  
    /* Set up global variables */
 
-4.9.5
+Version 4.9.5
   This is the latest tool version listed on the ZiLOG site for the Z8F6403.
   However, it uses different compiler command line arguments.
 
+Version 5.0.0
+
+  On November 18, 2012, all of the z8 configurations were converted to use 5.0.0,
+  but have not been verified on a running target.
+
+  Paths were also updated that are specific to a 32-bit toolchain running on
+  a 64 bit windows platform.  Change to a different toolchain, you will need
+  to modify the versioning in Make.defs and setenv.sh; if you want to build
+  on a different platform, you will need to change the path in the ZDS binaries
+  in those same files.
+  
 Other Versions
-  If you use any version of ZDS-II other than 4.10.1 or if you install ZDS-II
+  If you use any version of ZDS-II other than 5.0.0 or if you install ZDS-II
   at any location other than the default location, you will have to modify
   two files:  (1) configs/z8encore000zco/*/setenv.sh and (2)
   configs/z8encore000zco/*/Make.defs.
@@ -57,4 +68,44 @@ available:
     This builds the examples/ostest application for execution from FLASH.
     See examples/README.txt for information about ostest.
 
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the mconf tool.  See nuttx/README.txt and
+          misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. By default, this configuration assumes that you are using the
+       Cygwin environment on Windows.  An option is to use the native
+       CMD.exe window build as described in the top-level README.txt
+       file.  To set up that configuration:
+
+       -CONFIG_WINDOWS_CYGWIN=y
+       +CONFIG_WINDOWS_NATIVE=y
+
+       And after configuring, make sure that CONFIG_APPS_DIR uses
+       the back slash character.  For example:
+
+        CONFIG_APPS_DIR="..\apps"
+
+      NOTES:
+      
+      a. If you need to change the toolchain path used in Make.defs, you
+         will need to use the short 8.3 filenames to avoid spaces.  On my
+         PC, C:\PROGRA~1\ is is C:\Program Files\ and C:\PROGRA~2\ is
+         C:\Program Files (x86)\
+      b. You can't use setenv.sh in the native Windows environment.  Try
+         scripts/setenv.bat instead.
+      c. At present, the native Windows build fails at the final link stages.
+         The failure is due to problems in arch/z80/src/nuttx/linkcmd that
+         is autogenerated by arch/z80/src/Makefile.zdsii.  The basic program
+         is the spurious spaces and and carrirage returns are generated at
+         the end of the lines after a line continuation (\ ^M).  If these
+         trailing bad characters are manually eliminated, then the build
+         will succeed on the next try.
+
 Check out any README.txt files in these <sub-directory>s.
diff --git a/nuttx/configs/z8encore000zco/ostest/Make.defs b/nuttx/configs/z8encore000zco/ostest/Make.defs
index 9f033c20a..bbb9a9ddc 100644
--- a/nuttx/configs/z8encore000zco/ostest/Make.defs
+++ b/nuttx/configs/z8encore000zco/ostest/Make.defs
@@ -1,7 +1,7 @@
 ############################################################################
 # configs/z8encore000zco/ostest/Make.defs
 #
-#   Copyright (C) 2008 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2008, 2012 Gregory Nutt. All rights reserved.
 #   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
@@ -33,27 +33,44 @@
 #
 ############################################################################
 
-include ${TOPDIR}/.config
-include ${TOPDIR}/tools/Config.mk
+include $(TOPDIR)/.config
+include $(TOPDIR)/tools/Config.mk
 
-# These are the directories where the ZDS-II toolchain is installed
+# These are the directories where the ZDS-II toolchain is installed.  NOTE
+# that short 8.3 path names are used in order to avoid spaces.  On my machine
+# I have:
+#
+# C:\PROGRA~1\ = C:\Profram Files\
+# C:\PROGRA~2\ = C:\Program Files (x86)\
+#
+# Your PC may be configured differently.
 
-ZDSINSTALLDIR := C:/Program Files (x86)/ZiLOG/ZDSII_Z8Encore!_4.10.1
+ZDSVERSION := 5.0.0
 
 ifeq ($(CONFIG_WINDOWS_NATIVE),y)
-  ZDSBINDIR := $(ZDSINSTALLDIR)\bin
-  ZDSSTDINCDIR := $(ZDSINSTALLDIR)\include\std
-  ZDSZILOGINCDIR := $(ZDSINSTALLDIR)\include\zilog
+  ZDSINSTALLDIR := C:/PROGRA~2/ZiLOG/ZDSII_Z8Encore!_$(ZDSVERSION)
+  INSTALLDIR = ${shell echo $(ZDSINSTALLDIR)| sed -e "s/\//\\/g"}
+  ZDSBINDIR := $(INSTALLDIR)\bin
+  ZDSSTDINCDIR := $(INSTALLDIR)\include\std
+  ZDSZILOGINCDIR := $(INSTALLDIR)\include\zilog
 ifeq ($(CONFIG_ARCH_CHIP_Z8F642X),y)
-  ZDSDEVINCDIR := $(ZDSZILOGINCDIR)\Z8Encore_F642X
+  ZDSDEVINCDIR := $(INSTALLDIR)\Z8Encore_F642X
 endif
 ifeq ($(CONFIG_ARCH_CHIP_Z8F640X),y)
-  ZDSDEVINCDIR := $(ZDSZILOGINCDIR)\Z8Encore_F640X
+  ZDSDEVINCDIR := $(INSTALLDIR)\Z8Encore_F640X
 endif
-  ZDSSTDLIBDIR := $(ZDSINSTALLDIR)\lib\std
-  ZDSZILOGLIBDIR := $(ZDSINSTALLDIR)\lib\zilog
+  ZDSSTDLIBDIR := $(INSTALLDIR)\lib\std
+  ZDSZILOGLIBDIR := $(INSTALLDIR)\lib\zilog
+
+  # CFLAGs
+
+  ARCHASMINCLUDES = -include:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR)
+  EARCHASMINCLUDES = -include:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR)
+  ARCHSTDINCLUDES = -stdinc:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR)
+  ARCHUSRINCLUDES = -usrinc:.
 else
   WINTOOL := y
+  ZDSINSTALLDIR := C:/PROGRA~2/ZiLOG/ZDSII_Z8Encore!_$(ZDSVERSION)
   INSTALLDIR = ${shell cygpath -u "$(ZDSINSTALLDIR)"}
   ZDSBINDIR := $(INSTALLDIR)/bin
   ZDSSTDINCDIR := $(INSTALLDIR)/include/std
@@ -66,43 +83,50 @@ ifeq ($(CONFIG_ARCH_CHIP_Z8F640X),y)
 endif
   ZDSSTDLIBDIR := $(INSTALLDIR)/lib/std
   ZDSZILOGLIBDIR := $(INSTALLDIR)/lib/zilog
-endif
 
-# These are the same directories but with the directory separator
-# character swapped as needed by the ZDS-II compiler
+  # These are the same directories but with the directory separator
+  # character swapped as needed by the ZDS-II compiler
+
+  WTOPDIR := ${shell cygpath -w "$(TOPDIR)"}
+  WZDSSTDINCDIR := ${shell cygpath -w "$(ZDSSTDINCDIR)"}
+  WZDSZILOGINCDIR := ${shell cygpath -w "$(ZDSZILOGINCDIR)"}
+  WZDSDEVINCDIR := ${shell cygpath -w "$(ZDSDEVINCDIR)"}
+  WZDSSTDLIBDIR := ${shell cygpath -w "$(ZDSSTDLIBDIR)"}
+  WZDSZILOGLIBDIR := ${shell cygpath -w "$(ZDSZILOGLIBDIR)"}
 
-WTOPDIR := ${shell cygpath -w "$(TOPDIR)"}
-WZDSSTDINCDIR := ${shell cygpath -w "$(ZDSSTDINCDIR)"}
-WZDSZILOGINCDIR := ${shell cygpath -w "$(ZDSZILOGINCDIR)"}
-WZDSDEVINCDIR := ${shell cygpath -w "$(ZDSDEVINCDIR)"}
-WZDSSTDLIBDIR := ${shell cygpath -w "$(ZDSSTDLIBDIR)"}
-WZDSZILOGLIBDIR := ${shell cygpath -w "$(ZDSZILOGLIBDIR)"}
+  # Escaped versions
 
-# Escaped versions
+  ETOPDIR := ${shell echo "$(WTOPDIR)" | sed -e "s/ /%20/g"}
+  EZDSSTDINCDIR := ${shell echo "$(WZDSSTDINCDIR)" | sed -e "s/ /%20/g"}
+  EZDSZILOGINCDIR := ${shell echo "$(WZDSZILOGINCDIR)" | sed -e "s/ /%20/g"}
 
-ETOPDIR := ${shell echo "$(WTOPDIR)" | sed -e "s/ /%20/g"}
-EZDSSTDINCDIR := ${shell echo "$(WZDSSTDINCDIR)" | sed -e "s/ /%20/g"}
-EZDSZILOGINCDIR := ${shell echo "$(WZDSZILOGINCDIR)" | sed -e "s/ /%20/g"}
+  # CFLAGs
+
+  ARCHASMINCLUDES = -include:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)'
+  EARCHASMINCLUDES = -include:'$(ETOPDIR)\include;$(EZDSSTDINCDIR);$(EZDSZILOGINCDIR)'
+  ARCHSTDINCLUDES = -stdinc:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)'
+  ARCHUSRINCLUDES = -usrinc:'.'
+endif
 
 # Assembler definitions
 
 ifeq ($(CONFIG_ARCH_CHIP_Z8F642X),y)
-ARCHFAMILYDEF = _Z8ENCORE_F642X
-ARCHSERIESDEF = _Z8ENCORE_64K_SERIES
-ARCHREVAA = -NOrevaa
+  ARCHFAMILYDEF = _Z8ENCORE_F642X
+  ARCHSERIESDEF = _Z8ENCORE_64K_SERIES
+  ARCHREVAA = -NOrevaa
 ifeq ($(CONFIG_ARCH_CHIP_Z8F6423),y)
-ARCHCPU = Z8F6423
-ARCHCPUDEF = _Z8F6423
+  ARCHCPU = Z8F6423
+  ARCHCPUDEF = _Z8F6423
 endif
 endif
 
 ifeq ($(CONFIG_ARCH_CHIP_Z8F640X),y)
-ARCHFAMILYDEF = _Z8ENCORE_F640X
-ARCHSERIESDEF = _Z8ENCORE_640_FAMILY
-ARCHREVAA = -revaa
+  ARCHFAMILYDEF = _Z8ENCORE_F640X
+  ARCHSERIESDEF = _Z8ENCORE_640_FAMILY
+  ARCHREVAA = -revaa
 ifeq ($(CONFIG_ARCH_CHIP_Z8F6403),y)
-ARCHCPU = Z8F6403
-ARCHCPUDEF = _Z8F6403
+  ARCHCPU = Z8F6403
+  ARCHCPUDEF = _Z8F6403
 endif
 endif
 
@@ -116,8 +140,6 @@ ARCHASMCPUFLAGS = -cpu:$(ARCHCPU) -NOigcase $(ARCHREVAA)
 ARCHASMLIST = -list -NOlistmac -name -pagelen:56 -pagewidth:80 -quiet
 ARCHASMWARNINGS = -warn
 ARCHASMDEFINES = -define:$(ARCHCPUDEF)=1 -define:$(ARCHSERIESDEF)=1 -define:$(ARCHFAMILYDEF)=1 -define:__ASSEMBLY__
-ARCHASMINCLUDES = -include:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)'
-EARCHASMINCLUDES = -include:'$(ETOPDIR)\include;$(EZDSSTDINCDIR);$(EZDSZILOGINCDIR)'
 AFLAGS = $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMLIST) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)
 
 # Compiler definitions
@@ -135,12 +157,11 @@ ARCHPICFLAGS =
 ARCHWARNINGS = -warn
 ARCHDEFINES = -define:$(ARCHFAMILYDEF) -define:$(ARCHCPUDEF) -define:$(ARCHSERIESDEF)
 ARCHSTDINCLUDES = -stdinc:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR);$(WZDSDEVINCDIR)'
-ARCHUSRINCLUDES = -usrinc:'.'
 ARCHINCLUDES = $(ARCHSTDINCLUDES) $(ARCHUSRINCLUDES)
 CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHLIST) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
 
 CPPDEFINES = -D$(ARCHFAMILYDEF) -D$(ARCHCPUDEF) -D$(ARCHSERIESDEF) -D__ASSEMBLY__
-CPPINCLUDES = -I$(TOPDIR)/include
+CPPINCLUDES = -I$(TOPDIR)$(DELIM)include
 CPPFLAGS = $(CPPDEFINES) $(CPPINCLUDES)
 
 # Librarian definitions
@@ -149,16 +170,16 @@ ARFLAGS = -quiet -warn
 
 # Linker definitions
 
-LINKCMDTEMPLATE = $(TOPDIR)/configs/z8encore000zco/ostest/ostest.linkcmd
+LINKCMDTEMPLATE = $(TOPDIR)$(DELIM)configs$(DELIM)z8encore000zco$(DELIM)ostest$(DELIM)ostest.linkcmd
 
 # Tool names/pathes
 
 CROSSDEV =
-CC = $(ZDSBINDIR)/ez8cc.exe
+CC = ez8cc.exe
 CPP = gcc -E
-LD = $(ZDSBINDIR)/ez8link.exe
-AS = $(ZDSBINDIR)/ez8asm.exe
-AR = $(ZDSBINDIR)/ez8lib.exe
+LD = ez8link.exe
+AS = ez8asm.exe
+AR = ez8lib.exe
 
 # File extensions
 
@@ -171,51 +192,89 @@ EXEEXT = .hex
 # to compile and assembly source files and to insert the resulting
 # object files into an archive
 
+ifeq ($(CONFIG_WINDOWS_NATIVE),y)
+
 define PREPROCESS
-	@echo "CPP: $1->$2"
+	@echo CPP: $1->$2
 	$(Q) "$(CPP)" $(CPPFLAGS) $1 -o $2
 endef
 
 define COMPILE
-	@#echo "CC: $1"
-	$(Q) (wfile=`cygpath -w "$1"`; "$(CC)" $(CFLAGS) $$wfile)
+	$(Q) "$(CC)" $(CFLAGS)  ${shell echo $1 | sed -e "s/\//\\/g"}
 endef
 
 define ASSEMBLE
-	@#echo "AS: $1"
-	$(Q) (wfile=`cygpath -w "$1"`; "$(AS)" $(AFLAGS) $$wfile)
+	$(Q) "$(AS)" $(AFLAGS) ${shell echo $1 | sed -e "s/\//\\/g"}
 endef
 
-ifeq ($(CONFIG_WINDOWS_NATIVE),y)
 define ARCHIVE
-	echo "AR: $2";
+	echo AR: $2
 	$(Q) for %%G in ($(2)) do ( "$(AR)" $(ARFLAGS) $1=-+%%G )
 endef
+
+define CLEAN
+	$(Q) if exist *.obj (del /f /q *.obj)
+	$(Q) if exist *.src (del /f /q *.src)
+	$(Q) if exist *.lib (del /f /q *.lib)
+	$(Q) if exist *.hex (del /f /q *.hex)
+	$(Q) if exist *.lod (del /f /q *.lod)
+	$(Q) if exist *.lst (del /f /q *.lst)
+endef
+
 else
+
+define PREPROCESS
+	@echo "CPP: $1->$2"
+	$(Q) "$(CPP)" $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+	$(Q) (wfile=`cygpath -w "$1"`; "$(CC)" $(CFLAGS) $$wfile)
+endef
+
+define ASSEMBLE
+	$(Q) (wfile=`cygpath -w "$1"`; "$(AS)" $(AFLAGS) $$wfile)
+endef
+
 define ARCHIVE
 	$(Q) for __obj in $(2) ; do \
 		echo "AR: $$__obj"; \
 		"$(AR)" $(ARFLAGS) $1=-+$$__obj || { echo "$(AR) $1=-+$$__obj FAILED!" ; exit 1 ; } \
 	done
 endef
-endif
 
 define CLEAN
-	$(Q) rm -f *.obj *.src *.lib *.hex *.lst
+	$(Q) rm -f *.obj *.src *.lib *.hex *.lod *.lst
 endef
+endif
 
-# This is the tool to use for dependencies (i.e., none)
+# Windows native host tool definitions
 
-MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+ifeq ($(CONFIG_WINDOWS_NATIVE),y)
+  HOSTCC = mingw32-gcc.exe
+  HOSTINCLUDES = -I.
+  HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+  HOSTLDFLAGS =
+  HOSTEXEEXT = .exe
 
-# ZDS-II cannot follow Cygwin soft links, so we will have to use directory copies
+  # Windows-native host tools
 
-DIRLINK = $(TOPDIR)/tools/winlink.sh
-DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)\tools\mkdeps.exe --winnative
+else
 
 # Linux/Cygwin host tool definitions
 
-HOSTCC = gcc
-HOSTINCLUDES = -I.
-HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
-HOSTLDFLAGS =
+  HOSTCC = gcc
+  HOSTINCLUDES = -I.
+  HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+  HOSTLDFLAGS =
+
+  # This is the tool to use for dependencies (i.e., none)
+
+  MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
+
+  # ZDS-II cannot follow Cygwin soft links, so we will have to use directory copies
+
+  DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)winlink.sh
+  DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
+endif
diff --git a/nuttx/configs/z8encore000zco/ostest/setenv.sh b/nuttx/configs/z8encore000zco/ostest/setenv.sh
index 5aa816dd9..e866ad740 100755
--- a/nuttx/configs/z8encore000zco/ostest/setenv.sh
+++ b/nuttx/configs/z8encore000zco/ostest/setenv.sh
@@ -1,7 +1,7 @@
 #!/bin/bash
 # configs/z8encore000zco/ostest/setenv.sh
 #
-#   Copyright (C) 2008 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2008, 2009, 2012 Gregory Nutt. All rights reserved.
 #   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
@@ -33,20 +33,31 @@
 #
 # Check how we were executed
 #
-if [ "$(basename $0)" = "setenv.sh" ] ; then
+if [ "$_" = "$0" ] ; then
   echo "You must source this script, not run it!" 1>&2
   exit 1
 fi
 
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
 #
-# The ZDS-II toolchain lies outside of the Cygwin "sandbox" and
-# attempts to set the PATH variable do not have the desired effect.
-# Instead, alias are provided for all of the ZDS-II command line tools.
-# Version 4.10.1 installed in the default location is assumed here.
+# This is the Cygwin path to location where the XDS-II tools were installed
 #
-ZDSBINDIR="C:/Program\ Files/ZiLOG/ZDSII_Z8Encore!_4.10.1/bin"
-alias ez8asm="${ZDSBINDIR}/ez8asm.exe"
-alias ez8cc="${ZDSBINDIR}/ez8cc.exe"
-alias ez8lib="${ZDSBINDIR}/ez8lib.exe"
-alias ez8link="${ZDSBINDIR}/ez8link.exe"
+TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/ZiLOG/ZDSII_Z8Encore!_5.0.0/bin"
 
+#
+# Add the path to the toolchain to the PATH varialble.  NOTE that /bin and /usr/bin
+# preceded the toolchain bin directory.  This is because the ZDSII bin directory
+# includes binaries like make.exe that will interfere with the normal build process
+# if we do not give priority to the versions at /bin and /usr/bin.
+#
+export PATH="/bin:/usr/bin:${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/z8encore000zco/scripts/setenv.bat b/nuttx/configs/z8encore000zco/scripts/setenv.bat
new file mode 100644
index 000000000..f208a6e8b
--- /dev/null
+++ b/nuttx/configs/z8encore000zco/scripts/setenv.bat
@@ -0,0 +1,50 @@
+@echo off

+

+rem configs/z8encore000zco/scripts/setenv.bat

+rem

+rem   Copyright (C) 2012 Gregory Nutt. All rights reserved.

+rem   Author: Gregory Nutt <gnutt@nuttx.org>

+rem

+rem Redistribution and use in source and binary forms, with or without

+rem modification, are permitted provided that the following conditions

+rem are met:

+rem

+rem 1. Redistributions of source code must retain the above copyright

+rem    notice, this list of conditions and the following disclaimer.

+rem 2. Redistributions in binary form must reproduce the above copyright

+rem    notice, this list of conditions and the following disclaimer in

+rem    the documentation and/or other materials provided with the

+rem    distribution.

+rem 3. Neither the name NuttX nor the names of its contributors may be

+rem    used to endorse or promote products derived from this software

+rem    without specific prior written permission.

+rem

+rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

+rem "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

+rem LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

+rem FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

+rem COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

+rem INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+rem BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

+rem OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

+rem AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

+rem LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+rem ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+rem POSSIBILITY OF SUCH DAMAGE.

+

+rem This is the location where I installed in the MinGW compiler. With

+rem this configuration, it is recommended that you do NOT install the

+rem MSYS tools; they conflict with the GNUWin32 tools.  See

+rem http://www.mingw.org/ for further info.

+

+set PATH=C:\MinGW\bin;%PATH%

+

+rem This is the location where I installed the ZDS-II toolchain.

+

+set PATH=C:\Program Files (x86)\ZiLOG\ZZDSII_Z8Encore!_5.0.0\bin;%PATH%

+

+rem This is the location where I installed the GNUWin32 tools.  See

+rem http://gnuwin32.sourceforge.net/.

+

+set PATH=C:\gnuwin32\bin;%PATH%

+echo %PATH%