diff options
| author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2013-01-09 14:48:55 +0000 |
|---|---|---|
| committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2013-01-09 14:48:55 +0000 |
| commit | 25f65f6524fe5c6508de38300796e1183051ab3b (patch) | |
| tree | 3b685616dd8e36f94fabb4c9ce2dc19c9065b394 /nuttx/configs | |
| parent | 6afb58c74e1b0bbfe3306e1a3a00d31462c598fa (diff) | |
| download | px4-nuttx-25f65f6524fe5c6508de38300796e1183051ab3b.tar.gz px4-nuttx-25f65f6524fe5c6508de38300796e1183051ab3b.tar.bz2 px4-nuttx-25f65f6524fe5c6508de38300796e1183051ab3b.zip | |
Rename LM3S files, variables, and types from lm3s_ to lm_; Rename configuration variables from CONFIG_LM3S_ to CONFIG_LM_
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5497 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/configs')
53 files changed, 706 insertions, 706 deletions
diff --git a/nuttx/configs/eagle100/README.txt b/nuttx/configs/eagle100/README.txt index 3f9da652b..378f5a25b 100644 --- a/nuttx/configs/eagle100/README.txt +++ b/nuttx/configs/eagle100/README.txt @@ -334,15 +334,15 @@ Eagle100-specific Configuration Options Additional interrupt support can be disabled if desired to reduce memory footprint. - CONFIG_LM3S_DISABLE_GPIOA_IRQS=n - CONFIG_LM3S_DISABLE_GPIOB_IRQS=n - CONFIG_LM3S_DISABLE_GPIOC_IRQS=n - CONFIG_LM3S_DISABLE_GPIOD_IRQS=n - CONFIG_LM3S_DISABLE_GPIOE_IRQS=n - CONFIG_LM3S_DISABLE_GPIOF_IRQS=n - CONFIG_LM3S_DISABLE_GPIOG_IRQS=n - CONFIG_LM3S_DISABLE_GPIOH_IRQS=y - CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y + CONFIG_LM_DISABLE_GPIOA_IRQS=n + CONFIG_LM_DISABLE_GPIOB_IRQS=n + CONFIG_LM_DISABLE_GPIOC_IRQS=n + CONFIG_LM_DISABLE_GPIOD_IRQS=n + CONFIG_LM_DISABLE_GPIOE_IRQS=n + CONFIG_LM_DISABLE_GPIOF_IRQS=n + CONFIG_LM_DISABLE_GPIOG_IRQS=n + CONFIG_LM_DISABLE_GPIOH_IRQS=y + CONFIG_LM_DISABLE_GPIOJ_IRQS=y LM3S6818 specific device driver settings @@ -367,18 +367,18 @@ Eagle100-specific Configuration Options value is large, then larger values of this setting may cause Rx FIFO overrun errors. Default: half of the Tx FIFO size (4). - CONFIG_LM3S_ETHERNET - This must be set (along with CONFIG_NET) + CONFIG_LM_ETHERNET - This must be set (along with CONFIG_NET) to build the LM3S Ethernet driver - CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board. - CONFIG_LM3S_BOARDMAC - If the board-specific logic can provide + CONFIG_LM_ETHLEDS - Enable to use Ethernet LEDs on the board. + CONFIG_LM_BOARDMAC - If the board-specific logic can provide a MAC address (via lm_ethernetmac()), then this should be selected. - CONFIG_LM3S_ETHHDUPLEX - Set to force half duplex operation - CONFIG_LM3S_ETHNOAUTOCRC - Set to suppress auto-CRC generation - CONFIG_LM3S_ETHNOPAD - Set to suppress Tx padding - CONFIG_LM3S_MULTICAST - Set to enable multicast frames - CONFIG_LM3S_PROMISCUOUS - Set to enable promiscuous mode - CONFIG_LM3S_BADCRC - Set to enable bad CRC rejection. - CONFIG_LM3S_DUMPPACKET - Dump each packet received/sent to the console. + CONFIG_LM_ETHHDUPLEX - Set to force half duplex operation + CONFIG_LM_ETHNOAUTOCRC - Set to suppress auto-CRC generation + CONFIG_LM_ETHNOPAD - Set to suppress Tx padding + CONFIG_LM_MULTICAST - Set to enable multicast frames + CONFIG_LM_PROMISCUOUS - Set to enable promiscuous mode + CONFIG_LM_BADCRC - Set to enable bad CRC rejection. + CONFIG_LM_DUMPPACKET - Dump each packet received/sent to the console. Configurations ^^^^^^^^^^^^^^ diff --git a/nuttx/configs/eagle100/httpd/defconfig b/nuttx/configs/eagle100/httpd/defconfig index cf4f97930..bd0ac7664 100644 --- a/nuttx/configs/eagle100/httpd/defconfig +++ b/nuttx/configs/eagle100/httpd/defconfig @@ -58,21 +58,21 @@ CONFIG_ARCH_CALIBRATION=n # Disable support for interrupts on GPIOJ which does not # exist on the LM3S6918. Additional interrupt support can be # disabled if desired to reduce memory footprint. -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=n -CONFIG_LM3S_DISABLE_GPIOD_IRQS=n -CONFIG_LM3S_DISABLE_GPIOE_IRQS=n -CONFIG_LM3S_DISABLE_GPIOF_IRQS=n -CONFIG_LM3S_DISABLE_GPIOG_IRQS=n -CONFIG_LM3S_DISABLE_GPIOH_IRQS=n -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=n +CONFIG_LM_DISABLE_GPIOD_IRQS=n +CONFIG_LM_DISABLE_GPIOE_IRQS=n +CONFIG_LM_DISABLE_GPIOF_IRQS=n +CONFIG_LM_DISABLE_GPIOG_IRQS=n +CONFIG_LM_DISABLE_GPIOH_IRQS=n +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S6918 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=n CONFIG_UART0_SERIAL_CONSOLE=y CONFIG_UART1_SERIAL_CONSOLE=n CONFIG_UART0_TXBUFSIZE=256 @@ -99,16 +99,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S6918 specific serial device driver settings # -CONFIG_LM3S_ETHERNET=y -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=y +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=y +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/eagle100/include/board.h b/nuttx/configs/eagle100/include/board.h index 40a12327f..597f801ac 100644 --- a/nuttx/configs/eagle100/include/board.h +++ b/nuttx/configs/eagle100/include/board.h @@ -112,7 +112,7 @@ #ifndef __ASSEMBLY__ /************************************************************************************ - * Name: lm3s_boardinitialize + * Name: lm_boardinitialize * * Description: * All LM3S architectures must provide the following entry point. This entry point @@ -121,21 +121,21 @@ * ************************************************************************************/ -extern void lm3s_boardinitialize(void); +extern void lm_boardinitialize(void); /************************************************************************************ - * Name: lm3s_ethernetmac + * Name: lm_ethernetmac * * Description: * For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile - * USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, this function + * USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function * will obtain the MAC address from these registers. * ************************************************************************************/ -#ifdef CONFIG_LM3S_BOARDMAC +#ifdef CONFIG_LM_BOARDMAC struct ether_addr; -extern void lm3s_ethernetmac(struct ether_addr *ethaddr); +extern void lm_ethernetmac(struct ether_addr *ethaddr); #endif #endif /* __ASSEMBLY__ */ diff --git a/nuttx/configs/eagle100/nettest/defconfig b/nuttx/configs/eagle100/nettest/defconfig index a3b50ead6..9b1f616c6 100644 --- a/nuttx/configs/eagle100/nettest/defconfig +++ b/nuttx/configs/eagle100/nettest/defconfig @@ -58,21 +58,21 @@ CONFIG_ARCH_CALIBRATION=n # Disable support for interrupts on GPIOJ which does not # exist on the LM3S6918. Additional interrupt support can be # disabled if desired to reduce memory footprint. -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=n -CONFIG_LM3S_DISABLE_GPIOD_IRQS=n -CONFIG_LM3S_DISABLE_GPIOE_IRQS=n -CONFIG_LM3S_DISABLE_GPIOF_IRQS=n -CONFIG_LM3S_DISABLE_GPIOG_IRQS=n -CONFIG_LM3S_DISABLE_GPIOH_IRQS=n -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=n +CONFIG_LM_DISABLE_GPIOD_IRQS=n +CONFIG_LM_DISABLE_GPIOE_IRQS=n +CONFIG_LM_DISABLE_GPIOF_IRQS=n +CONFIG_LM_DISABLE_GPIOG_IRQS=n +CONFIG_LM_DISABLE_GPIOH_IRQS=n +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S6918 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=n CONFIG_UART0_SERIAL_CONSOLE=y CONFIG_UART1_SERIAL_CONSOLE=n CONFIG_UART0_TXBUFSIZE=256 @@ -99,16 +99,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S6918 specific serial device driver settings # -CONFIG_LM3S_ETHERNET=y -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=y +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=y +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/eagle100/nsh/defconfig b/nuttx/configs/eagle100/nsh/defconfig index 342023d6a..079bbc60e 100644 --- a/nuttx/configs/eagle100/nsh/defconfig +++ b/nuttx/configs/eagle100/nsh/defconfig @@ -58,21 +58,21 @@ CONFIG_ARCH_CALIBRATION=n # Disable support for interrupts on GPIOJ which does not # exist on the LM3S6918. Additional interrupt support can be # disabled if desired to reduce memory footprint. -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=n -CONFIG_LM3S_DISABLE_GPIOD_IRQS=n -CONFIG_LM3S_DISABLE_GPIOE_IRQS=n -CONFIG_LM3S_DISABLE_GPIOF_IRQS=n -CONFIG_LM3S_DISABLE_GPIOG_IRQS=n -CONFIG_LM3S_DISABLE_GPIOH_IRQS=n -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=n +CONFIG_LM_DISABLE_GPIOD_IRQS=n +CONFIG_LM_DISABLE_GPIOE_IRQS=n +CONFIG_LM_DISABLE_GPIOF_IRQS=n +CONFIG_LM_DISABLE_GPIOG_IRQS=n +CONFIG_LM_DISABLE_GPIOH_IRQS=n +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S6918 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=n CONFIG_UART0_SERIAL_CONSOLE=y CONFIG_UART1_SERIAL_CONSOLE=n CONFIG_UART0_TXBUFSIZE=256 @@ -99,16 +99,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S6918 specific serial device driver settings # -CONFIG_LM3S_ETHERNET=y -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=y +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=y +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/eagle100/nxflat/defconfig b/nuttx/configs/eagle100/nxflat/defconfig index fe02ab4b9..110f906cb 100644 --- a/nuttx/configs/eagle100/nxflat/defconfig +++ b/nuttx/configs/eagle100/nxflat/defconfig @@ -58,21 +58,21 @@ CONFIG_ARCH_CALIBRATION=n # Disable support for interrupts on GPIOJ which does not # exist on the LM3S6918. Additional interrupt support can be # disabled if desired to reduce memory footprint. -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=n -CONFIG_LM3S_DISABLE_GPIOD_IRQS=n -CONFIG_LM3S_DISABLE_GPIOE_IRQS=n -CONFIG_LM3S_DISABLE_GPIOF_IRQS=n -CONFIG_LM3S_DISABLE_GPIOG_IRQS=n -CONFIG_LM3S_DISABLE_GPIOH_IRQS=n -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=n +CONFIG_LM_DISABLE_GPIOD_IRQS=n +CONFIG_LM_DISABLE_GPIOE_IRQS=n +CONFIG_LM_DISABLE_GPIOF_IRQS=n +CONFIG_LM_DISABLE_GPIOG_IRQS=n +CONFIG_LM_DISABLE_GPIOH_IRQS=n +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S6918 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=n CONFIG_UART0_SERIAL_CONSOLE=y CONFIG_UART1_SERIAL_CONSOLE=n CONFIG_UART0_TXBUFSIZE=256 @@ -99,16 +99,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S6918 specific serial device driver settings # -CONFIG_LM3S_ETHERNET=n -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=n +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=y +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/eagle100/ostest/defconfig b/nuttx/configs/eagle100/ostest/defconfig index 52496c4a3..6d3b4ddad 100644 --- a/nuttx/configs/eagle100/ostest/defconfig +++ b/nuttx/configs/eagle100/ostest/defconfig @@ -58,21 +58,21 @@ CONFIG_ARCH_CALIBRATION=n # Disable support for interrupts on GPIOJ which does not # exist on the LM3S6918. Additional interrupt support can be # disabled if desired to reduce memory footprint. -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=n -CONFIG_LM3S_DISABLE_GPIOD_IRQS=n -CONFIG_LM3S_DISABLE_GPIOE_IRQS=n -CONFIG_LM3S_DISABLE_GPIOF_IRQS=n -CONFIG_LM3S_DISABLE_GPIOG_IRQS=n -CONFIG_LM3S_DISABLE_GPIOH_IRQS=n -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=n +CONFIG_LM_DISABLE_GPIOD_IRQS=n +CONFIG_LM_DISABLE_GPIOE_IRQS=n +CONFIG_LM_DISABLE_GPIOF_IRQS=n +CONFIG_LM_DISABLE_GPIOG_IRQS=n +CONFIG_LM_DISABLE_GPIOH_IRQS=n +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S6918 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=n CONFIG_UART0_SERIAL_CONSOLE=y CONFIG_UART1_SERIAL_CONSOLE=n CONFIG_UART0_TXBUFSIZE=256 @@ -99,16 +99,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S6918 specific serial device driver settings # -CONFIG_LM3S_ETHERNET=n -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=n +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=y +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/eagle100/src/eagle100_internal.h b/nuttx/configs/eagle100/src/eagle100_internal.h index d8bcd6a81..8a76e2eb5 100644 --- a/nuttx/configs/eagle100/src/eagle100_internal.h +++ b/nuttx/configs/eagle100/src/eagle100_internal.h @@ -81,14 +81,14 @@ #ifndef __ASSEMBLY__ /************************************************************************************ - * Name: lm3s_ssiinitialize + * Name: lm_ssiinitialize * * Description: * Called to configure SPI chip select GPIO pins for the Eagle100 board. * ************************************************************************************/ -extern void weak_function lm3s_ssiinitialize(void); +extern void weak_function lm_ssiinitialize(void); /**************************************************************************** * Name: up_ledinit diff --git a/nuttx/configs/eagle100/src/up_boot.c b/nuttx/configs/eagle100/src/up_boot.c index 44f003e0b..8fed389f8 100644 --- a/nuttx/configs/eagle100/src/up_boot.c +++ b/nuttx/configs/eagle100/src/up_boot.c @@ -60,7 +60,7 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_boardinitialize + * Name: lm_boardinitialize * * Description: * All LM3S architectures must provide the following entry point. This entry point @@ -68,18 +68,18 @@ * and mapped but before any devices have been initialized. ************************************************************************************/ -void lm3s_boardinitialize(void) +void lm_boardinitialize(void) { /* Configure SPI chip selects if 1) SSI is not disabled, and 2) the weak function - * lm3s_ssiinitialize() has been brought into the link. + * lm_ssiinitialize() has been brought into the link. */ /* The Eagle100 microSD CS is on SSI0 */ #if !defined(CONFIG_SSI0_DISABLE) /* || !defined(CONFIG_SSI1_DISABLE) */ - if (lm3s_ssiinitialize) + if (lm_ssiinitialize) { - lm3s_ssiinitialize(); + lm_ssiinitialize(); } #endif diff --git a/nuttx/configs/eagle100/src/up_ethernet.c b/nuttx/configs/eagle100/src/up_ethernet.c index a071fcca9..42876b3b5 100644 --- a/nuttx/configs/eagle100/src/up_ethernet.c +++ b/nuttx/configs/eagle100/src/up_ethernet.c @@ -63,17 +63,17 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_ethernetmac + * Name: lm_ethernetmac * * Description: * For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile - * USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, this function + * USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function * will obtain the MAC address from these registers. * ************************************************************************************/ -#ifdef CONFIG_LM3S_BOARDMAC -void lm3s_ethernetmac(struct ether_addr *ethaddr) +#ifdef CONFIG_LM_BOARDMAC +void lm_ethernetmac(struct ether_addr *ethaddr) { uint32_t user0; uint32_t user1; diff --git a/nuttx/configs/eagle100/src/up_leds.c b/nuttx/configs/eagle100/src/up_leds.c index 0124b964b..5566b58b2 100644 --- a/nuttx/configs/eagle100/src/up_leds.c +++ b/nuttx/configs/eagle100/src/up_leds.c @@ -72,7 +72,7 @@ /* Dump GPIO registers */ #ifdef LED_DEBUG -# define led_dumpgpio(m) lm3s_dumpgpio(LED_GPIO, m) +# define led_dumpgpio(m) lm_dumpgpio(LED_GPIO, m) #else # define led_dumpgpio(m) #endif @@ -106,9 +106,9 @@ void up_ledinit(void) /* Configure Port E, Bit 1 as an output, initial value=OFF */ - led_dumpgpio("up_ledinit before lm3s_configgpio()"); - lm3s_configgpio(LED_GPIO); - led_dumpgpio("up_ledinit after lm3s_configgpio()"); + led_dumpgpio("up_ledinit before lm_configgpio()"); + lm_configgpio(LED_GPIO); + led_dumpgpio("up_ledinit after lm_configgpio()"); g_nest = 0; } @@ -132,9 +132,9 @@ void up_ledon(int led) g_nest++; case LED_IRQSENABLED: case LED_STACKCREATED: - led_dumpgpio("up_ledon: before lm3s_gpiowrite()"); - lm3s_gpiowrite(LED_GPIO, false); - led_dumpgpio("up_ledon: after lm3s_gpiowrite()"); + led_dumpgpio("up_ledon: before lm_gpiowrite()"); + lm_gpiowrite(LED_GPIO, false); + led_dumpgpio("up_ledon: after lm_gpiowrite()"); break; } } @@ -160,9 +160,9 @@ void up_ledoff(int led) case LED_PANIC: if (--g_nest <= 0) { - led_dumpgpio("up_ledoff: before lm3s_gpiowrite()"); - lm3s_gpiowrite(LED_GPIO, true); - led_dumpgpio("up_ledoff: after lm3s_gpiowrite()"); + led_dumpgpio("up_ledoff: before lm_gpiowrite()"); + lm_gpiowrite(LED_GPIO, true); + led_dumpgpio("up_ledoff: after lm_gpiowrite()"); } break; } diff --git a/nuttx/configs/eagle100/src/up_ssi.c b/nuttx/configs/eagle100/src/up_ssi.c index b78a0d67c..c18cf52a5 100644 --- a/nuttx/configs/eagle100/src/up_ssi.c +++ b/nuttx/configs/eagle100/src/up_ssi.c @@ -81,7 +81,7 @@ /* Dump GPIO registers */ #ifdef SSI_VERBOSE -# define ssi_dumpgpio(m) lm3s_dumpgpio(SDCCS_GPIO, m) +# define ssi_dumpgpio(m) lm_dumpgpio(SDCCS_GPIO, m) #else # define ssi_dumpgpio(m) #endif @@ -95,30 +95,30 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_ssiinitialize + * Name: lm_ssiinitialize * * Description: * Called to configure SPI chip select GPIO pins for the Eagle100 board. * ************************************************************************************/ -void weak_function lm3s_ssiinitialize(void) +void weak_function lm_ssiinitialize(void) { /* Configure the SPI-based microSD CS GPIO */ - ssi_dumpgpio("lm3s_ssiinitialize() before lm3s_configgpio()"); - lm3s_configgpio(SDCCS_GPIO); - ssi_dumpgpio("lm3s_ssiinitialize() after lm3s_configgpio()"); + ssi_dumpgpio("lm_ssiinitialize() before lm_configgpio()"); + lm_configgpio(SDCCS_GPIO); + ssi_dumpgpio("lm_ssiinitialize() after lm_configgpio()"); } /**************************************************************************** - * The external functions, lm3s_spiselect and lm3s_spistatus must be provided + * The external functions, lm_spiselect and lm_spistatus must be provided * by board-specific logic. The are implementations of the select and status * methods SPI interface defined by struct spi_ops_s (see include/nuttx/spi.h). * All othermethods (including up_spiinitialize()) are provided by common * logic. To use this common SPI logic on your board: * - * 1. Provide lm3s_spiselect() and lm3s_spistatus() functions in your + * 1. Provide lm_spiselect() and lm_spistatus() functions in your * board-specific logic. This function will perform chip selection and * status operations using GPIOs in the way your board is configured. * 2. Add a call to up_spiinitialize() in your low level initialization @@ -130,20 +130,20 @@ void weak_function lm3s_ssiinitialize(void) * ****************************************************************************/ -void lm3s_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) +void lm_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) { ssidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); if (devid == SPIDEV_MMCSD) { /* Assert the CS pin to the card */ - ssi_dumpgpio("lm3s_spiselect() before lm3s_gpiowrite()"); - lm3s_gpiowrite(SDCCS_GPIO, !selected); - ssi_dumpgpio("lm3s_spiselect() after lm3s_gpiowrite()"); + ssi_dumpgpio("lm_spiselect() before lm_gpiowrite()"); + lm_gpiowrite(SDCCS_GPIO, !selected); + ssi_dumpgpio("lm_spiselect() after lm_gpiowrite()"); } } -uint8_t lm3s_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) +uint8_t lm_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) { ssidbg("Returning SPI_STATUS_PRESENT\n"); return SPI_STATUS_PRESENT; diff --git a/nuttx/configs/eagle100/thttpd/defconfig b/nuttx/configs/eagle100/thttpd/defconfig index 7efbbed11..2aca2582e 100644 --- a/nuttx/configs/eagle100/thttpd/defconfig +++ b/nuttx/configs/eagle100/thttpd/defconfig @@ -58,21 +58,21 @@ CONFIG_ARCH_CALIBRATION=n # Disable support for interrupts on GPIOJ which does not # exist on the LM3S6918. Additional interrupt support can be # disabled if desired to reduce memory footprint. -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=n -CONFIG_LM3S_DISABLE_GPIOD_IRQS=n -CONFIG_LM3S_DISABLE_GPIOE_IRQS=n -CONFIG_LM3S_DISABLE_GPIOF_IRQS=n -CONFIG_LM3S_DISABLE_GPIOG_IRQS=n -CONFIG_LM3S_DISABLE_GPIOH_IRQS=n -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=n +CONFIG_LM_DISABLE_GPIOD_IRQS=n +CONFIG_LM_DISABLE_GPIOE_IRQS=n +CONFIG_LM_DISABLE_GPIOF_IRQS=n +CONFIG_LM_DISABLE_GPIOG_IRQS=n +CONFIG_LM_DISABLE_GPIOH_IRQS=n +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S6918 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=n CONFIG_UART0_SERIAL_CONSOLE=y CONFIG_UART1_SERIAL_CONSOLE=n CONFIG_UART0_TXBUFSIZE=256 @@ -99,16 +99,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S6918 specific serial device driver settings # -CONFIG_LM3S_ETHERNET=y -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=y +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=y +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/ekk-lm3s9b96/README.txt b/nuttx/configs/ekk-lm3s9b96/README.txt index f7896118e..78f7f7b8c 100644 --- a/nuttx/configs/ekk-lm3s9b96/README.txt +++ b/nuttx/configs/ekk-lm3s9b96/README.txt @@ -102,12 +102,12 @@ GNU Toolchain Options the CodeSourcery or devkitARM, you simply need to add one of the following configuration options to your .config (or defconfig) file: - CONFIG_LM3S_CODESOURCERYW=y : CodeSourcery under Windows - CONFIG_LM3S_CODESOURCERYL=y : CodeSourcery under Linux - CONFIG_LM3S_DEVKITARM=y : devkitARM under Windows - CONFIG_LM3S_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) + CONFIG_LM_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_LM_CODESOURCERYL=y : CodeSourcery under Linux + CONFIG_LM_DEVKITARM=y : devkitARM under Windows + CONFIG_LM_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) - If you are not using CONFIG_LM3S_BUILDROOT, then you may also have to modify + If you are not using CONFIG_LM_BUILDROOT, then you may also have to modify the PATH in the setenv.h file if your make cannot find the tools. NOTE: the CodeSourcery (for Windows) and devkitARM are Windows native toolchains. @@ -352,15 +352,15 @@ Stellaris EKK-LM3S9B96 Evaluation Kit Configuration Options Additional interrupt support can be disabled if desired to reduce memory footprint. - CONFIG_LM3S_DISABLE_GPIOA_IRQS=n - CONFIG_LM3S_DISABLE_GPIOB_IRQS=n - CONFIG_LM3S_DISABLE_GPIOC_IRQS=n - CONFIG_LM3S_DISABLE_GPIOD_IRQS=n - CONFIG_LM3S_DISABLE_GPIOE_IRQS=n - CONFIG_LM3S_DISABLE_GPIOF_IRQS=n - CONFIG_LM3S_DISABLE_GPIOG_IRQS=n - CONFIG_LM3S_DISABLE_GPIOH_IRQS=n - CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y + CONFIG_LM_DISABLE_GPIOA_IRQS=n + CONFIG_LM_DISABLE_GPIOB_IRQS=n + CONFIG_LM_DISABLE_GPIOC_IRQS=n + CONFIG_LM_DISABLE_GPIOD_IRQS=n + CONFIG_LM_DISABLE_GPIOE_IRQS=n + CONFIG_LM_DISABLE_GPIOF_IRQS=n + CONFIG_LM_DISABLE_GPIOG_IRQS=n + CONFIG_LM_DISABLE_GPIOH_IRQS=n + CONFIG_LM_DISABLE_GPIOJ_IRQS=y LM3S6818 specific device driver settings @@ -385,18 +385,18 @@ Stellaris EKK-LM3S9B96 Evaluation Kit Configuration Options value is large, then larger values of this setting may cause Rx FIFO overrun errors. Default: half of the Tx FIFO size (4). - CONFIG_LM3S_ETHERNET - This must be set (along with CONFIG_NET) + CONFIG_LM_ETHERNET - This must be set (along with CONFIG_NET) to build the LM3S Ethernet driver - CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board. - CONFIG_LM3S_BOARDMAC - If the board-specific logic can provide + CONFIG_LM_ETHLEDS - Enable to use Ethernet LEDs on the board. + CONFIG_LM_BOARDMAC - If the board-specific logic can provide a MAC address (via lm_ethernetmac()), then this should be selected. - CONFIG_LM3S_ETHHDUPLEX - Set to force half duplex operation - CONFIG_LM3S_ETHNOAUTOCRC - Set to suppress auto-CRC generation - CONFIG_LM3S_ETHNOPAD - Set to suppress Tx padding - CONFIG_LM3S_MULTICAST - Set to enable multicast frames - CONFIG_LM3S_PROMISCUOUS - Set to enable promiscuous mode - CONFIG_LM3S_BADCRC - Set to enable bad CRC rejection. - CONFIG_LM3S_DUMPPACKET - Dump each packet received/sent to the console. + CONFIG_LM_ETHHDUPLEX - Set to force half duplex operation + CONFIG_LM_ETHNOAUTOCRC - Set to suppress auto-CRC generation + CONFIG_LM_ETHNOPAD - Set to suppress Tx padding + CONFIG_LM_MULTICAST - Set to enable multicast frames + CONFIG_LM_PROMISCUOUS - Set to enable promiscuous mode + CONFIG_LM_BADCRC - Set to enable bad CRC rejection. + CONFIG_LM_DUMPPACKET - Dump each packet received/sent to the console. Configurations ^^^^^^^^^^^^^^ diff --git a/nuttx/configs/ekk-lm3s9b96/include/board.h b/nuttx/configs/ekk-lm3s9b96/include/board.h index 2e6cd93f1..f5c997539 100644 --- a/nuttx/configs/ekk-lm3s9b96/include/board.h +++ b/nuttx/configs/ekk-lm3s9b96/include/board.h @@ -113,7 +113,7 @@ #ifndef __ASSEMBLY__ /************************************************************************************ - * Name: lm3s_boardinitialize + * Name: lm_boardinitialize * * Description: * All LM3S architectures must provide the following entry point. This entry point @@ -122,21 +122,21 @@ * ************************************************************************************/ -extern void lm3s_boardinitialize(void); +extern void lm_boardinitialize(void); /************************************************************************************ - * Name: lm3s_ethernetmac + * Name: lm_ethernetmac * * Description: * For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile - * USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, this function + * USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function * will obtain the MAC address from these registers. * ************************************************************************************/ -#ifdef CONFIG_LM3S_BOARDMAC +#ifdef CONFIG_LM_BOARDMAC struct ether_addr; -extern void lm3s_ethernetmac(struct ether_addr *ethaddr); +extern void lm_ethernetmac(struct ether_addr *ethaddr); #endif #endif /* __ASSEMBLY__ */ diff --git a/nuttx/configs/ekk-lm3s9b96/nsh/defconfig b/nuttx/configs/ekk-lm3s9b96/nsh/defconfig index b614c0316..adb9bb5fa 100644 --- a/nuttx/configs/ekk-lm3s9b96/nsh/defconfig +++ b/nuttx/configs/ekk-lm3s9b96/nsh/defconfig @@ -57,32 +57,32 @@ CONFIG_ARCH_CALIBRATION=n # # Identify toolchain and linker options # -CONFIG_LM3S_CODESOURCERYW=n -CONFIG_LM3S_CODESOURCERYL=n -CONFIG_LM3S_DEVKITARM=n -CONFIG_LM3S_BUILDROOT=y -CONFIG_LM3S_DFU=y +CONFIG_LM_CODESOURCERYW=n +CONFIG_LM_CODESOURCERYL=n +CONFIG_LM_DEVKITARM=n +CONFIG_LM_BUILDROOT=y +CONFIG_LM_DFU=y # # Disable support for interrupts on GPIOH and GPIOJ which do not # exist on the LM3S6B96. Additional interrupt support can be # disabled if desired to reduce memory footprint. -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=n -CONFIG_LM3S_DISABLE_GPIOD_IRQS=n -CONFIG_LM3S_DISABLE_GPIOE_IRQS=n -CONFIG_LM3S_DISABLE_GPIOF_IRQS=n -CONFIG_LM3S_DISABLE_GPIOG_IRQS=n -CONFIG_LM3S_DISABLE_GPIOH_IRQS=y -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=n +CONFIG_LM_DISABLE_GPIOD_IRQS=n +CONFIG_LM_DISABLE_GPIOE_IRQS=n +CONFIG_LM_DISABLE_GPIOF_IRQS=n +CONFIG_LM_DISABLE_GPIOG_IRQS=n +CONFIG_LM_DISABLE_GPIOH_IRQS=y +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S6B96 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=n -CONFIG_LM3S_UART2=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=n +CONFIG_LM_UART2=n CONFIG_UART0_SERIAL_CONSOLE=y CONFIG_UART1_SERIAL_CONSOLE=n CONFIG_UART2_SERIAL_CONSOLE=n @@ -116,16 +116,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S6B96 specific serial device driver settings # -CONFIG_LM3S_ETHERNET=y -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=n -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=y +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=n +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/ekk-lm3s9b96/ostest/defconfig b/nuttx/configs/ekk-lm3s9b96/ostest/defconfig index df5622360..821502036 100644 --- a/nuttx/configs/ekk-lm3s9b96/ostest/defconfig +++ b/nuttx/configs/ekk-lm3s9b96/ostest/defconfig @@ -57,32 +57,32 @@ CONFIG_ARCH_CALIBRATION=n # # Identify toolchain and linker options # -CONFIG_LM3S_CODESOURCERYW=n -CONFIG_LM3S_CODESOURCERYL=n -CONFIG_LM3S_DEVKITARM=n -CONFIG_LM3S_BUILDROOT=y -CONFIG_LM3S_DFU=y +CONFIG_LM_CODESOURCERYW=n +CONFIG_LM_CODESOURCERYL=n +CONFIG_LM_DEVKITARM=n +CONFIG_LM_BUILDROOT=y +CONFIG_LM_DFU=y # # Disable support for interrupts on GPIOH and GPIOJ which do not # exist on the LM3S6B96. Additional interrupt support can be # disabled if desired to reduce memory footprint. -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=n -CONFIG_LM3S_DISABLE_GPIOD_IRQS=n -CONFIG_LM3S_DISABLE_GPIOE_IRQS=n -CONFIG_LM3S_DISABLE_GPIOF_IRQS=n -CONFIG_LM3S_DISABLE_GPIOG_IRQS=n -CONFIG_LM3S_DISABLE_GPIOH_IRQS=y -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=n +CONFIG_LM_DISABLE_GPIOD_IRQS=n +CONFIG_LM_DISABLE_GPIOE_IRQS=n +CONFIG_LM_DISABLE_GPIOF_IRQS=n +CONFIG_LM_DISABLE_GPIOG_IRQS=n +CONFIG_LM_DISABLE_GPIOH_IRQS=y +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S6B96 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=n -CONFIG_LM3S_UART2=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=n +CONFIG_LM_UART2=n CONFIG_UART0_SERIAL_CONSOLE=y CONFIG_UART1_SERIAL_CONSOLE=n CONFIG_UART2_SERIAL_CONSOLE=n @@ -116,16 +116,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S6B96 specific serial device driver settings # -CONFIG_LM3S_ETHERNET=n -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=n +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=y +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/ekk-lm3s9b96/src/ekklm3s9b96_internal.h b/nuttx/configs/ekk-lm3s9b96/src/ekklm3s9b96_internal.h index 17b0d0e27..d7ab916c8 100644 --- a/nuttx/configs/ekk-lm3s9b96/src/ekklm3s9b96_internal.h +++ b/nuttx/configs/ekk-lm3s9b96/src/ekklm3s9b96_internal.h @@ -102,14 +102,14 @@ #ifndef __ASSEMBLY__ /************************************************************************************ - * Name: lm3s_ssiinitialize + * Name: lm_ssiinitialize * * Description: * Called to configure SPI chip select GPIO pins for the LM3S6965 Eval Kit. * ************************************************************************************/ -extern void weak_function lm3s_ssiinitialize(void); +extern void weak_function lm_ssiinitialize(void); #endif /* __ASSEMBLY__ */ #endif /* __CONFIGS_EKK_LM3S9B96_SRC_EKKLM3S9B96_INTERNAL_H */ diff --git a/nuttx/configs/ekk-lm3s9b96/src/up_boot.c b/nuttx/configs/ekk-lm3s9b96/src/up_boot.c index 528d150e1..16057ccb9 100644 --- a/nuttx/configs/ekk-lm3s9b96/src/up_boot.c +++ b/nuttx/configs/ekk-lm3s9b96/src/up_boot.c @@ -62,7 +62,7 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_boardinitialize + * Name: lm_boardinitialize * * Description: * All LM3S architectures must provide the following entry point. This entry point @@ -70,16 +70,16 @@ * and mapped but before any devices have been initialized. ************************************************************************************/ -void lm3s_boardinitialize(void) +void lm_boardinitialize(void) { /* Configure chip selects if 1) SSI is not disabled, and 2) the weak function - * lm3s_ssiinitialize() has been brought into the link. + * lm_ssiinitialize() has been brought into the link. */ #if !defined(CONFIG_SSI0_DISABLE) || !defined(CONFIG_SSI1_DISABLE) - if (lm3s_ssiinitialize) + if (lm_ssiinitialize) { - lm3s_ssiinitialize(); + lm_ssiinitialize(); } #endif diff --git a/nuttx/configs/ekk-lm3s9b96/src/up_ethernet.c b/nuttx/configs/ekk-lm3s9b96/src/up_ethernet.c index a1963f0d5..bc4149082 100644 --- a/nuttx/configs/ekk-lm3s9b96/src/up_ethernet.c +++ b/nuttx/configs/ekk-lm3s9b96/src/up_ethernet.c @@ -64,17 +64,17 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_ethernetmac + * Name: lm_ethernetmac * * Description: * For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile - * USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, this function + * USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function * will obtain the MAC address from these registers. * ************************************************************************************/ -#ifdef CONFIG_LM3S_BOARDMAC -void lm3s_ethernetmac(struct ether_addr *ethaddr) +#ifdef CONFIG_LM_BOARDMAC +void lm_ethernetmac(struct ether_addr *ethaddr) { uint32_t user0; uint32_t user1; diff --git a/nuttx/configs/ekk-lm3s9b96/src/up_leds.c b/nuttx/configs/ekk-lm3s9b96/src/up_leds.c index 7628fcfe0..e6abe1a8a 100644 --- a/nuttx/configs/ekk-lm3s9b96/src/up_leds.c +++ b/nuttx/configs/ekk-lm3s9b96/src/up_leds.c @@ -73,7 +73,7 @@ /* Dump GPIO registers */ #ifdef LED_DEBUG -# define led_dumpgpio(m) lm3s_dumpgpio(LED_GPIO, m) +# define led_dumpgpio(m) lm_dumpgpio(LED_GPIO, m) #else # define led_dumpgpio(m) #endif @@ -103,9 +103,9 @@ void up_ledinit(void) /* Configure Port D, Bit 0 as an output, initial value=OFF */ - led_dumpgpio("up_ledinit before lm3s_configgpio()"); - lm3s_configgpio(LED_GPIO); - led_dumpgpio("up_ledinit after lm3s_configgpio()"); + led_dumpgpio("up_ledinit before lm_configgpio()"); + lm_configgpio(LED_GPIO); + led_dumpgpio("up_ledinit after lm_configgpio()"); g_nest = 0; } @@ -129,9 +129,9 @@ void up_ledon(int led) g_nest++; case LED_IRQSENABLED: case LED_STACKCREATED: - led_dumpgpio("up_ledon: before lm3s_gpiowrite()"); - lm3s_gpiowrite(LED_GPIO, false); - led_dumpgpio("up_ledon: after lm3s_gpiowrite()"); + led_dumpgpio("up_ledon: before lm_gpiowrite()"); + lm_gpiowrite(LED_GPIO, false); + led_dumpgpio("up_ledon: after lm_gpiowrite()"); break; } } @@ -157,9 +157,9 @@ void up_ledoff(int led) case LED_PANIC: if (--g_nest <= 0) { - led_dumpgpio("up_ledoff: before lm3s_gpiowrite()"); - lm3s_gpiowrite(LED_GPIO, true); - led_dumpgpio("up_ledoff: after lm3s_gpiowrite()"); + led_dumpgpio("up_ledoff: before lm_gpiowrite()"); + lm_gpiowrite(LED_GPIO, true); + led_dumpgpio("up_ledoff: after lm_gpiowrite()"); } break; } diff --git a/nuttx/configs/ekk-lm3s9b96/src/up_ssi.c b/nuttx/configs/ekk-lm3s9b96/src/up_ssi.c index 8f297e7a7..d7ee0ef16 100644 --- a/nuttx/configs/ekk-lm3s9b96/src/up_ssi.c +++ b/nuttx/configs/ekk-lm3s9b96/src/up_ssi.c @@ -81,7 +81,7 @@ #ifdef SSI_VERBOSE #if 0 -# define ssi_dumpgpio(m) lm3s_dumpgpio(SDCCS_GPIO, m) +# define ssi_dumpgpio(m) lm_dumpgpio(SDCCS_GPIO, m) #endif #else # define ssi_dumpgpio(m) @@ -96,31 +96,31 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_ssiinitialize + * Name: lm_ssiinitialize * * Description: * Called to configure chip select GPIO pins for the LM3S9B96 Eval board. * ************************************************************************************/ -void weak_function lm3s_ssiinitialize(void) +void weak_function lm_ssiinitialize(void) { /* Configure the CS GPIO */ #if 0 - ssi_dumpgpio("lm3s_ssiinitialize() Entry"); - ssi_dumpgpio("lm3s_ssiinitialize() Exit"); + ssi_dumpgpio("lm_ssiinitialize() Entry"); + ssi_dumpgpio("lm_ssiinitialize() Exit"); #endif } #if 0 /**************************************************************************** - * The external functions, lm3s_spiselect and lm3s_spistatus must be provided + * The external functions, lm_spiselect and lm_spistatus must be provided * by board-specific logic. The are implementations of the select and status * methods SPI interface defined by struct spi_ops_s (see include/nuttx/spi.h). * All othermethods (including up_spiinitialize()) are provided by common * logic. To use this common SPI logic on your board: * - * 1. Provide lm3s_spiselect() and lm3s_spistatus() functions in your + * 1. Provide lm_spiselect() and lm_spistatus() functions in your * board-specific logic. This function will perform chip selection and * status operations using GPIOs in the way your board is configured. * 2. Add a call to up_spiinitialize() in your low level initialization @@ -132,28 +132,28 @@ void weak_function lm3s_ssiinitialize(void) * ****************************************************************************/ -void lm3s_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) +void lm_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) { ssidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); - ssi_dumpgpio("lm3s_spiselect() Entry"); + ssi_dumpgpio("lm_spiselect() Entry"); if (devid == SPIDEV_MMCSD) { /* Assert the CS pin to the card */ - lm3s_gpiowrite(SDCCS_GPIO, !selected); + lm_gpiowrite(SDCCS_GPIO, !selected); } #ifdef CONFIG_NX_LCDDRIVER else if (devid == SPIDEV_DISPLAY) { /* Assert the CS pin to the display */ - lm3s_gpiowrite(OLEDCS_GPIO, !selected); + lm_gpiowrite(OLEDCS_GPIO, !selected); } #endif - ssi_dumpgpio("lm3s_spiselect() Exit"); + ssi_dumpgpio("lm_spiselect() Exit"); } -uint8_t lm3s_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) +uint8_t lm_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) { ssidbg("Returning SPI_STATUS_PRESENT\n"); return SPI_STATUS_PRESENT; diff --git a/nuttx/configs/lm3s6432-s2e/README.txt b/nuttx/configs/lm3s6432-s2e/README.txt index 669708c16..29cf80fae 100644 --- a/nuttx/configs/lm3s6432-s2e/README.txt +++ b/nuttx/configs/lm3s6432-s2e/README.txt @@ -97,12 +97,12 @@ GNU Toolchain Options To use a specific toolchain, you simply need to add one of the following configuration options to your .config (or defconfig) file: - CONFIG_LM3S_CODESOURCERYW=y : CodeSourcery under Windows - CONFIG_LM3S_CODESOURCERYL=y : CodeSourcery under Linux or on Mac OS X. - CONFIG_LM3S_DEVKITARM=y : devkitARM under Windows - CONFIG_LM3S_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) + CONFIG_LM_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_LM_CODESOURCERYL=y : CodeSourcery under Linux or on Mac OS X. + CONFIG_LM_DEVKITARM=y : devkitARM under Windows + CONFIG_LM_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) - If you are not using CONFIG_LM3S_BUILDROOT, then you may also have to modify + If you are not using CONFIG_LM_BUILDROOT, then you may also have to modify the PATH in the setenv.h file if your make cannot find the tools. NOTE: the CodeSourcery (for Windows) and devkitARM are Windows native toolchains. @@ -346,15 +346,15 @@ Stellaris MDL-S2E Reference Design Configuration Options Additional interrupt support can be disabled if desired to reduce memory footprint - GPIOs C-G are not pinned out on the MDL-S2E board. - CONFIG_LM3S_DISABLE_GPIOA_IRQS=n - CONFIG_LM3S_DISABLE_GPIOB_IRQS=n - CONFIG_LM3S_DISABLE_GPIOC_IRQS=y - CONFIG_LM3S_DISABLE_GPIOD_IRQS=y - CONFIG_LM3S_DISABLE_GPIOE_IRQS=y - CONFIG_LM3S_DISABLE_GPIOF_IRQS=y - CONFIG_LM3S_DISABLE_GPIOG_IRQS=y - CONFIG_LM3S_DISABLE_GPIOH_IRQS=y - CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y + CONFIG_LM_DISABLE_GPIOA_IRQS=n + CONFIG_LM_DISABLE_GPIOB_IRQS=n + CONFIG_LM_DISABLE_GPIOC_IRQS=y + CONFIG_LM_DISABLE_GPIOD_IRQS=y + CONFIG_LM_DISABLE_GPIOE_IRQS=y + CONFIG_LM_DISABLE_GPIOF_IRQS=y + CONFIG_LM_DISABLE_GPIOG_IRQS=y + CONFIG_LM_DISABLE_GPIOH_IRQS=y + CONFIG_LM_DISABLE_GPIOJ_IRQS=y LM3S6432 specific device driver settings @@ -388,18 +388,18 @@ Stellaris MDL-S2E Reference Design Configuration Options value is large, then larger values of this setting may cause Rx FIFO overrun errors. Default: half of the Tx FIFO size (4). - CONFIG_LM3S_ETHERNET - This must be set (along with CONFIG_NET) + CONFIG_LM_ETHERNET - This must be set (along with CONFIG_NET) to build the LM3S Ethernet driver - CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board. - CONFIG_LM3S_BOARDMAC - This should be set in order to use the + CONFIG_LM_ETHLEDS - Enable to use Ethernet LEDs on the board. + CONFIG_LM_BOARDMAC - This should be set in order to use the MAC address configured in the flash USER registers. - CONFIG_LM3S_ETHHDUPLEX - Set to force half duplex operation - CONFIG_LM3S_ETHNOAUTOCRC - Set to suppress auto-CRC generation - CONFIG_LM3S_ETHNOPAD - Set to suppress Tx padding - CONFIG_LM3S_MULTICAST - Set to enable multicast frames - CONFIG_LM3S_PROMISCUOUS - Set to enable promiscuous mode - CONFIG_LM3S_BADCRC - Set to enable bad CRC rejection. - CONFIG_LM3S_DUMPPACKET - Dump each packet received/sent to the console. + CONFIG_LM_ETHHDUPLEX - Set to force half duplex operation + CONFIG_LM_ETHNOAUTOCRC - Set to suppress auto-CRC generation + CONFIG_LM_ETHNOPAD - Set to suppress Tx padding + CONFIG_LM_MULTICAST - Set to enable multicast frames + CONFIG_LM_PROMISCUOUS - Set to enable promiscuous mode + CONFIG_LM_BADCRC - Set to enable bad CRC rejection. + CONFIG_LM_DUMPPACKET - Dump each packet received/sent to the console. Configurations ^^^^^^^^^^^^^^ diff --git a/nuttx/configs/lm3s6432-s2e/include/board.h b/nuttx/configs/lm3s6432-s2e/include/board.h index 06504ec4f..7fdcabf76 100644 --- a/nuttx/configs/lm3s6432-s2e/include/board.h +++ b/nuttx/configs/lm3s6432-s2e/include/board.h @@ -114,7 +114,7 @@ #ifndef __ASSEMBLY__ /************************************************************************************ - * Name: lm3s_boardinitialize + * Name: lm_boardinitialize * * Description: * All LM3S architectures must provide the following entry point. This entry point @@ -123,21 +123,21 @@ * ************************************************************************************/ -extern void lm3s_boardinitialize(void); +extern void lm_boardinitialize(void); /************************************************************************************ - * Name: lm3s_ethernetmac + * Name: lm_ethernetmac * * Description: * For the MDL-S2E Reference Design, the MAC address will be stored in the - * non-volatile USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, + * non-volatile USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, * this function will obtain the MAC address from these registers. * ************************************************************************************/ -#ifdef CONFIG_LM3S_BOARDMAC +#ifdef CONFIG_LM_BOARDMAC struct ether_addr; -extern void lm3s_ethernetmac(struct ether_addr *ethaddr); +extern void lm_ethernetmac(struct ether_addr *ethaddr); #endif #endif /* __ASSEMBLY__ */ diff --git a/nuttx/configs/lm3s6432-s2e/nsh/defconfig b/nuttx/configs/lm3s6432-s2e/nsh/defconfig index edd61eacc..a09bc6717 100644 --- a/nuttx/configs/lm3s6432-s2e/nsh/defconfig +++ b/nuttx/configs/lm3s6432-s2e/nsh/defconfig @@ -56,32 +56,32 @@ CONFIG_ARCH_CALIBRATION=n # # Identify toolchain and linker options # -CONFIG_LM3S_CODESOURCERYW=n -CONFIG_LM3S_CODESOURCERYL=y -CONFIG_LM3S_DEVKITARM=n -CONFIG_LM3S_BUILDROOT=n +CONFIG_LM_CODESOURCERYW=n +CONFIG_LM_CODESOURCERYL=y +CONFIG_LM_DEVKITARM=n +CONFIG_LM_BUILDROOT=n # # Disable support for interrupts on GPIOs which do not # exist on the LM3S6432 or are not pinned anywhere useful # on the S2E. # -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=y -CONFIG_LM3S_DISABLE_GPIOD_IRQS=y -CONFIG_LM3S_DISABLE_GPIOE_IRQS=y -CONFIG_LM3S_DISABLE_GPIOF_IRQS=y -CONFIG_LM3S_DISABLE_GPIOG_IRQS=y -CONFIG_LM3S_DISABLE_GPIOH_IRQS=y -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=y +CONFIG_LM_DISABLE_GPIOD_IRQS=y +CONFIG_LM_DISABLE_GPIOE_IRQS=y +CONFIG_LM_DISABLE_GPIOF_IRQS=y +CONFIG_LM_DISABLE_GPIOG_IRQS=y +CONFIG_LM_DISABLE_GPIOH_IRQS=y +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S6432 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=y -CONFIG_LM3S_UART2=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=y +CONFIG_LM_UART2=n CONFIG_UART0_SERIAL_CONSOLE=n CONFIG_UART1_SERIAL_CONSOLE=y CONFIG_UART2_SERIAL_CONSOLE=n @@ -115,16 +115,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S6432 specific ethernet device driver settings # -CONFIG_LM3S_ETHERNET=y -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=y +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=y +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/lm3s6432-s2e/ostest/defconfig b/nuttx/configs/lm3s6432-s2e/ostest/defconfig index 2d32db81c..9387fd086 100644 --- a/nuttx/configs/lm3s6432-s2e/ostest/defconfig +++ b/nuttx/configs/lm3s6432-s2e/ostest/defconfig @@ -56,32 +56,32 @@ CONFIG_ARCH_CALIBRATION=n # # Identify toolchain and linker options # -CONFIG_LM3S_CODESOURCERYW=n -CONFIG_LM3S_CODESOURCERYL=y -CONFIG_LM3S_DEVKITARM=n -CONFIG_LM3S_BUILDROOT=n +CONFIG_LM_CODESOURCERYW=n +CONFIG_LM_CODESOURCERYL=y +CONFIG_LM_DEVKITARM=n +CONFIG_LM_BUILDROOT=n # # Disable support for interrupts on GPIOs which do not # exist on the LM3S6432 or are not pinned anywhere useful # on the S2E. # -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=y -CONFIG_LM3S_DISABLE_GPIOD_IRQS=y -CONFIG_LM3S_DISABLE_GPIOE_IRQS=y -CONFIG_LM3S_DISABLE_GPIOF_IRQS=y -CONFIG_LM3S_DISABLE_GPIOG_IRQS=y -CONFIG_LM3S_DISABLE_GPIOH_IRQS=y -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=y +CONFIG_LM_DISABLE_GPIOD_IRQS=y +CONFIG_LM_DISABLE_GPIOE_IRQS=y +CONFIG_LM_DISABLE_GPIOF_IRQS=y +CONFIG_LM_DISABLE_GPIOG_IRQS=y +CONFIG_LM_DISABLE_GPIOH_IRQS=y +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S6432 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=y -CONFIG_LM3S_UART2=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=y +CONFIG_LM_UART2=n CONFIG_UART0_SERIAL_CONSOLE=n CONFIG_UART1_SERIAL_CONSOLE=y CONFIG_UART2_SERIAL_CONSOLE=n @@ -115,16 +115,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S6432 specific ethernet device driver settings # -CONFIG_LM3S_ETHERNET=n -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=n +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=y +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/lm3s6432-s2e/src/lm3s6432s2e_internal.h b/nuttx/configs/lm3s6432-s2e/src/lm3s6432s2e_internal.h index f54403c7a..f95b118ad 100644 --- a/nuttx/configs/lm3s6432-s2e/src/lm3s6432s2e_internal.h +++ b/nuttx/configs/lm3s6432-s2e/src/lm3s6432s2e_internal.h @@ -112,14 +112,14 @@ #ifndef __ASSEMBLY__ /************************************************************************************ - * Name: lm3s_ssiinitialize + * Name: lm_ssiinitialize * * Description: * Called to configure SPI chip select GPIO pins for the MDL-S2E. * ************************************************************************************/ -extern void weak_function lm3s_ssiinitialize(void); +extern void weak_function lm_ssiinitialize(void); #endif /* __ASSEMBLY__ */ #endif /* __CONFIGS_LM3S6432_S2E_SRC_LM3S6432S2E_INTERNAL_H */ diff --git a/nuttx/configs/lm3s6432-s2e/src/up_boot.c b/nuttx/configs/lm3s6432-s2e/src/up_boot.c index 184529638..da900282f 100644 --- a/nuttx/configs/lm3s6432-s2e/src/up_boot.c +++ b/nuttx/configs/lm3s6432-s2e/src/up_boot.c @@ -54,7 +54,7 @@ * Definitions ************************************************************************************/ -#if defined(CONFIG_LM3S_UART1) && !defined(CONFIG_SSI0_DISABLE) +#if defined(CONFIG_LM_UART1) && !defined(CONFIG_SSI0_DISABLE) # error Only one of UART1 and SSI0 can be enabled on this board. #endif @@ -67,7 +67,7 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_boardinitialize + * Name: lm_boardinitialize * * Description: * All LM3S architectures must provide the following entry point. This entry point @@ -75,16 +75,16 @@ * and mapped but before any devices have been initialized. ************************************************************************************/ -void lm3s_boardinitialize(void) +void lm_boardinitialize(void) { /* Configure SPI chip selects if 1) SSI is not disabled, and 2) the weak function - * lm3s_ssiinitialize() has been brought into the link. + * lm_ssiinitialize() has been brought into the link. */ #if !defined(CONFIG_SSI0_DISABLE) - if (lm3s_ssiinitialize) + if (lm_ssiinitialize) { - lm3s_ssiinitialize(); + lm_ssiinitialize(); } #endif @@ -96,8 +96,8 @@ void lm3s_boardinitialize(void) /* Configure serial transciever */ - lm3s_configgpio(XCVR_INV_GPIO); - lm3s_configgpio(XCVR_ENA_GPIO); - lm3s_configgpio(XCVR_ON_GPIO); - lm3s_configgpio(XCVR_OFF_GPIO); + lm_configgpio(XCVR_INV_GPIO); + lm_configgpio(XCVR_ENA_GPIO); + lm_configgpio(XCVR_ON_GPIO); + lm_configgpio(XCVR_OFF_GPIO); } diff --git a/nuttx/configs/lm3s6432-s2e/src/up_ethernet.c b/nuttx/configs/lm3s6432-s2e/src/up_ethernet.c index 09d5040c4..434ffe2c5 100644 --- a/nuttx/configs/lm3s6432-s2e/src/up_ethernet.c +++ b/nuttx/configs/lm3s6432-s2e/src/up_ethernet.c @@ -63,17 +63,17 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_ethernetmac + * Name: lm_ethernetmac * * Description: * For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile - * USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, this function + * USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function * will obtain the MAC address from these registers. * ************************************************************************************/ -#ifdef CONFIG_LM3S_BOARDMAC -void lm3s_ethernetmac(struct ether_addr *ethaddr) +#ifdef CONFIG_LM_BOARDMAC +void lm_ethernetmac(struct ether_addr *ethaddr) { uint32_t user0; uint32_t user1; diff --git a/nuttx/configs/lm3s6432-s2e/src/up_leds.c b/nuttx/configs/lm3s6432-s2e/src/up_leds.c index 81610db34..e0dd53f28 100644 --- a/nuttx/configs/lm3s6432-s2e/src/up_leds.c +++ b/nuttx/configs/lm3s6432-s2e/src/up_leds.c @@ -72,7 +72,7 @@ /* Dump GPIO registers */ #ifdef LED_DEBUG -# define led_dumpgpio(m) lm3s_dumpgpio(LED_GPIO, m) +# define led_dumpgpio(m) lm_dumpgpio(LED_GPIO, m) #else # define led_dumpgpio(m) #endif @@ -102,10 +102,10 @@ void up_ledinit(void) /* Configure Port F, Bit 2 as an output, initial value=OFF */ - led_dumpgpio("up_ledinit before lm3s_configgpio()"); - lm3s_configgpio(LED0_GPIO); - lm3s_configgpio(LED1_GPIO); - led_dumpgpio("up_ledinit after lm3s_configgpio()"); + led_dumpgpio("up_ledinit before lm_configgpio()"); + lm_configgpio(LED0_GPIO); + lm_configgpio(LED1_GPIO); + led_dumpgpio("up_ledinit after lm_configgpio()"); g_nest = 0; } @@ -129,9 +129,9 @@ void up_ledon(int led) g_nest++; case LED_IRQSENABLED: case LED_STACKCREATED: - led_dumpgpio("up_ledon: before lm3s_gpiowrite()"); - lm3s_gpiowrite(LED1_GPIO, false); - led_dumpgpio("up_ledon: after lm3s_gpiowrite()"); + led_dumpgpio("up_ledon: before lm_gpiowrite()"); + lm_gpiowrite(LED1_GPIO, false); + led_dumpgpio("up_ledon: after lm_gpiowrite()"); break; } } @@ -157,9 +157,9 @@ void up_ledoff(int led) case LED_PANIC: if (--g_nest <= 0) { - led_dumpgpio("up_ledoff: before lm3s_gpiowrite()"); - lm3s_gpiowrite(LED1_GPIO, true); - led_dumpgpio("up_ledoff: after lm3s_gpiowrite()"); + led_dumpgpio("up_ledoff: before lm_gpiowrite()"); + lm_gpiowrite(LED1_GPIO, true); + led_dumpgpio("up_ledoff: after lm_gpiowrite()"); } break; } diff --git a/nuttx/configs/lm3s6432-s2e/src/up_ssi.c b/nuttx/configs/lm3s6432-s2e/src/up_ssi.c index a7844a979..5468e2b4d 100644 --- a/nuttx/configs/lm3s6432-s2e/src/up_ssi.c +++ b/nuttx/configs/lm3s6432-s2e/src/up_ssi.c @@ -79,7 +79,7 @@ /* Dump GPIO registers */ #ifdef SSI_VERBOSE -# define ssi_dumpgpio(m) lm3s_dumpgpio(SDCCS_GPIO, m) +# define ssi_dumpgpio(m) lm_dumpgpio(SDCCS_GPIO, m) #else # define ssi_dumpgpio(m) #endif @@ -93,30 +93,30 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_ssiinitialize + * Name: lm_ssiinitialize * * Description: * Called to configure SPI chip select GPIO pins for the MDL-S2E. * ************************************************************************************/ -void weak_function lm3s_ssiinitialize(void) +void weak_function lm_ssiinitialize(void) { /* Configure the SPI CS GPIO */ - ssi_dumpgpio("lm3s_ssiinitialize() Entry)"); - lm3s_configgpio(SSICS_GPIO); - ssi_dumpgpio("lm3s_ssiinitialize() Exit"); + ssi_dumpgpio("lm_ssiinitialize() Entry)"); + lm_configgpio(SSICS_GPIO); + ssi_dumpgpio("lm_ssiinitialize() Exit"); } /**************************************************************************** - * The external functions, lm3s_spiselect and lm3s_spistatus must be provided + * The external functions, lm_spiselect and lm_spistatus must be provided * by board-specific logic. The are implementations of the select and status * methods SPI interface defined by struct spi_ops_s (see include/nuttx/spi.h). * All othermethods (including up_spiinitialize()) are provided by common * logic. To use this common SPI logic on your board: * - * 1. Provide lm3s_spiselect() and lm3s_spistatus() functions in your + * 1. Provide lm_spiselect() and lm_spistatus() functions in your * board-specific logic. This function will perform chip selection and * status operations using GPIOs in the way your board is configured. * 2. Add a call to up_spiinitialize() in your low level initialization @@ -128,21 +128,21 @@ void weak_function lm3s_ssiinitialize(void) * ****************************************************************************/ -void lm3s_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) +void lm_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) { ssidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); - ssi_dumpgpio("lm3s_spiselect() Entry"); + ssi_dumpgpio("lm_spiselect() Entry"); if (devid == SPIDEV_MMCSD) { /* Assert the CS pin to the card */ - lm3s_gpiowrite(SDCCS_GPIO, !selected); + lm_gpiowrite(SDCCS_GPIO, !selected); } - ssi_dumpgpio("lm3s_spiselect() Exit"); + ssi_dumpgpio("lm_spiselect() Exit"); } -uint8_t lm3s_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) +uint8_t lm_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) { ssidbg("Returning SPI_STATUS_PRESENT\n"); return SPI_STATUS_PRESENT; diff --git a/nuttx/configs/lm3s6965-ek/README.txt b/nuttx/configs/lm3s6965-ek/README.txt index e0349f5de..813e11467 100644 --- a/nuttx/configs/lm3s6965-ek/README.txt +++ b/nuttx/configs/lm3s6965-ek/README.txt @@ -126,12 +126,12 @@ GNU Toolchain Options the CodeSourcery or devkitARM, you simply need to add one of the following configuration options to your .config (or defconfig) file: - CONFIG_LM3S_CODESOURCERYW=y : CodeSourcery under Windows - CONFIG_LM3S_CODESOURCERYL=y : CodeSourcery under Linux - CONFIG_LM3S_DEVKITARM=y : devkitARM under Windows - CONFIG_LM3S_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) + CONFIG_LM_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_LM_CODESOURCERYL=y : CodeSourcery under Linux + CONFIG_LM_DEVKITARM=y : devkitARM under Windows + CONFIG_LM_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) - If you are not using CONFIG_LM3S_BUILDROOT, then you may also have to modify + If you are not using CONFIG_LM_BUILDROOT, then you may also have to modify the PATH in the setenv.h file if your make cannot find the tools. NOTE: the CodeSourcery (for Windows) and devkitARM are Windows native toolchains. @@ -415,15 +415,15 @@ Stellaris LM3S6965 Evaluation Kit Configuration Options Additional interrupt support can be disabled if desired to reduce memory footprint. - CONFIG_LM3S_DISABLE_GPIOA_IRQS=n - CONFIG_LM3S_DISABLE_GPIOB_IRQS=n - CONFIG_LM3S_DISABLE_GPIOC_IRQS=n - CONFIG_LM3S_DISABLE_GPIOD_IRQS=n - CONFIG_LM3S_DISABLE_GPIOE_IRQS=n - CONFIG_LM3S_DISABLE_GPIOF_IRQS=n - CONFIG_LM3S_DISABLE_GPIOG_IRQS=n - CONFIG_LM3S_DISABLE_GPIOH_IRQS=n - CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y + CONFIG_LM_DISABLE_GPIOA_IRQS=n + CONFIG_LM_DISABLE_GPIOB_IRQS=n + CONFIG_LM_DISABLE_GPIOC_IRQS=n + CONFIG_LM_DISABLE_GPIOD_IRQS=n + CONFIG_LM_DISABLE_GPIOE_IRQS=n + CONFIG_LM_DISABLE_GPIOF_IRQS=n + CONFIG_LM_DISABLE_GPIOG_IRQS=n + CONFIG_LM_DISABLE_GPIOH_IRQS=n + CONFIG_LM_DISABLE_GPIOJ_IRQS=y LM3S6818 specific device driver settings @@ -448,18 +448,18 @@ Stellaris LM3S6965 Evaluation Kit Configuration Options value is large, then larger values of this setting may cause Rx FIFO overrun errors. Default: half of the Tx FIFO size (4). - CONFIG_LM3S_ETHERNET - This must be set (along with CONFIG_NET) + CONFIG_LM_ETHERNET - This must be set (along with CONFIG_NET) to build the LM3S Ethernet driver - CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board. - CONFIG_LM3S_BOARDMAC - If the board-specific logic can provide + CONFIG_LM_ETHLEDS - Enable to use Ethernet LEDs on the board. + CONFIG_LM_BOARDMAC - If the board-specific logic can provide a MAC address (via lm_ethernetmac()), then this should be selected. - CONFIG_LM3S_ETHHDUPLEX - Set to force half duplex operation - CONFIG_LM3S_ETHNOAUTOCRC - Set to suppress auto-CRC generation - CONFIG_LM3S_ETHNOPAD - Set to suppress Tx padding - CONFIG_LM3S_MULTICAST - Set to enable multicast frames - CONFIG_LM3S_PROMISCUOUS - Set to enable promiscuous mode - CONFIG_LM3S_BADCRC - Set to enable bad CRC rejection. - CONFIG_LM3S_DUMPPACKET - Dump each packet received/sent to the console. + CONFIG_LM_ETHHDUPLEX - Set to force half duplex operation + CONFIG_LM_ETHNOAUTOCRC - Set to suppress auto-CRC generation + CONFIG_LM_ETHNOPAD - Set to suppress Tx padding + CONFIG_LM_MULTICAST - Set to enable multicast frames + CONFIG_LM_PROMISCUOUS - Set to enable promiscuous mode + CONFIG_LM_BADCRC - Set to enable bad CRC rejection. + CONFIG_LM_DUMPPACKET - Dump each packet received/sent to the console. Configurations ^^^^^^^^^^^^^^ diff --git a/nuttx/configs/lm3s6965-ek/include/board.h b/nuttx/configs/lm3s6965-ek/include/board.h index e8eaf9dd1..808d009cc 100644 --- a/nuttx/configs/lm3s6965-ek/include/board.h +++ b/nuttx/configs/lm3s6965-ek/include/board.h @@ -112,7 +112,7 @@ #ifndef __ASSEMBLY__ /************************************************************************************ - * Name: lm3s_boardinitialize + * Name: lm_boardinitialize * * Description: * All LM3S architectures must provide the following entry point. This entry point @@ -121,21 +121,21 @@ * ************************************************************************************/ -extern void lm3s_boardinitialize(void); +extern void lm_boardinitialize(void); /************************************************************************************ - * Name: lm3s_ethernetmac + * Name: lm_ethernetmac * * Description: * For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile - * USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, this function + * USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function * will obtain the MAC address from these registers. * ************************************************************************************/ -#ifdef CONFIG_LM3S_BOARDMAC +#ifdef CONFIG_LM_BOARDMAC struct ether_addr; -extern void lm3s_ethernetmac(struct ether_addr *ethaddr); +extern void lm_ethernetmac(struct ether_addr *ethaddr); #endif #endif /* __ASSEMBLY__ */ diff --git a/nuttx/configs/lm3s6965-ek/nsh/defconfig b/nuttx/configs/lm3s6965-ek/nsh/defconfig index c1827920b..99f2f50ab 100755 --- a/nuttx/configs/lm3s6965-ek/nsh/defconfig +++ b/nuttx/configs/lm3s6965-ek/nsh/defconfig @@ -100,44 +100,44 @@ CONFIG_ARMV7M_OABI_TOOLCHAIN=y # CONFIG_ARCH_CHIP_LM3S6432 is not set CONFIG_ARCH_CHIP_LM3S6965=y # CONFIG_ARCH_CHIP_LM3S8962 is not set -# CONFIG_LM3S_REVA2 is not set -CONFIG_LM3S_DFU=y +# CONFIG_LM_REVA2 is not set +CONFIG_LM_DFU=y # # Select LM3S Peripheral Support # -CONFIG_LM3S_UART0=y -# CONFIG_LM3S_UART1 is not set +CONFIG_LM_UART0=y +# CONFIG_LM_UART1 is not set # CONFIG_SSI0_DISABLE is not set CONFIG_SSI1_DISABLE=y -# CONFIG_LM3S_UART2 is not set -CONFIG_LM3S_ETHERNET=y +# CONFIG_LM_UART2 is not set +CONFIG_LM_ETHERNET=y # # Disable GPIO Interrupts # -# CONFIG_LM3S_DISABLE_GPIOA_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOB_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOC_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOD_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOE_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOF_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOG_IRQS is not set -CONFIG_LM3S_DISABLE_GPIOH_IRQS=y -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +# CONFIG_LM_DISABLE_GPIOA_IRQS is not set +# CONFIG_LM_DISABLE_GPIOB_IRQS is not set +# CONFIG_LM_DISABLE_GPIOC_IRQS is not set +# CONFIG_LM_DISABLE_GPIOD_IRQS is not set +# CONFIG_LM_DISABLE_GPIOE_IRQS is not set +# CONFIG_LM_DISABLE_GPIOF_IRQS is not set +# CONFIG_LM_DISABLE_GPIOG_IRQS is not set +CONFIG_LM_DISABLE_GPIOH_IRQS=y +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S Ethernet Configuration # -# CONFIG_LM3S_ETHLEDS is not set -# CONFIG_LM3S_BOARDMAC is not set -# CONFIG_LM3S_ETHHDUPLEX is not set -# CONFIG_LM3S_ETHNOAUTOCRC is not set -# CONFIG_LM3S_ETHNOPAD is not set -# CONFIG_LM3S_MULTICAST is not set -# CONFIG_LM3S_PROMISCUOUS is not set -# CONFIG_LM3S_TIMESTAMP is not set -# CONFIG_LM3S_BADCRC is not set +# CONFIG_LM_ETHLEDS is not set +# CONFIG_LM_BOARDMAC is not set +# CONFIG_LM_ETHHDUPLEX is not set +# CONFIG_LM_ETHNOAUTOCRC is not set +# CONFIG_LM_ETHNOPAD is not set +# CONFIG_LM_MULTICAST is not set +# CONFIG_LM_PROMISCUOUS is not set +# CONFIG_LM_TIMESTAMP is not set +# CONFIG_LM_BADCRC is not set # CONFIG_M3S_DUMPPACKET is not set # diff --git a/nuttx/configs/lm3s6965-ek/nx/defconfig b/nuttx/configs/lm3s6965-ek/nx/defconfig index e3cac8dd7..b86d06dc9 100755 --- a/nuttx/configs/lm3s6965-ek/nx/defconfig +++ b/nuttx/configs/lm3s6965-ek/nx/defconfig @@ -100,31 +100,31 @@ CONFIG_ARMV7M_OABI_TOOLCHAIN=y # CONFIG_ARCH_CHIP_LM3S6432 is not set CONFIG_ARCH_CHIP_LM3S6965=y # CONFIG_ARCH_CHIP_LM3S8962 is not set -# CONFIG_LM3S_REVA2 is not set -CONFIG_LM3S_DFU=y +# CONFIG_LM_REVA2 is not set +CONFIG_LM_DFU=y # # Select LM3S Peripheral Support # -CONFIG_LM3S_UART0=y -# CONFIG_LM3S_UART1 is not set +CONFIG_LM_UART0=y +# CONFIG_LM_UART1 is not set # CONFIG_SSI0_DISABLE is not set CONFIG_SSI1_DISABLE=y -# CONFIG_LM3S_UART2 is not set -# CONFIG_LM3S_ETHERNET is not set +# CONFIG_LM_UART2 is not set +# CONFIG_LM_ETHERNET is not set # # Disable GPIO Interrupts # -# CONFIG_LM3S_DISABLE_GPIOA_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOB_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOC_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOD_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOE_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOF_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOG_IRQS is not set -CONFIG_LM3S_DISABLE_GPIOH_IRQS=y -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +# CONFIG_LM_DISABLE_GPIOA_IRQS is not set +# CONFIG_LM_DISABLE_GPIOB_IRQS is not set +# CONFIG_LM_DISABLE_GPIOC_IRQS is not set +# CONFIG_LM_DISABLE_GPIOD_IRQS is not set +# CONFIG_LM_DISABLE_GPIOE_IRQS is not set +# CONFIG_LM_DISABLE_GPIOF_IRQS is not set +# CONFIG_LM_DISABLE_GPIOG_IRQS is not set +CONFIG_LM_DISABLE_GPIOH_IRQS=y +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S SSI Configuration diff --git a/nuttx/configs/lm3s6965-ek/ostest/defconfig b/nuttx/configs/lm3s6965-ek/ostest/defconfig index 81247c795..bc433e116 100755 --- a/nuttx/configs/lm3s6965-ek/ostest/defconfig +++ b/nuttx/configs/lm3s6965-ek/ostest/defconfig @@ -100,31 +100,31 @@ CONFIG_ARMV7M_OABI_TOOLCHAIN=y # CONFIG_ARCH_CHIP_LM3S6432 is not set CONFIG_ARCH_CHIP_LM3S6965=y # CONFIG_ARCH_CHIP_LM3S8962 is not set -# CONFIG_LM3S_REVA2 is not set -CONFIG_LM3S_DFU=y +# CONFIG_LM_REVA2 is not set +CONFIG_LM_DFU=y # # Select LM3S Peripheral Support # -CONFIG_LM3S_UART0=y -# CONFIG_LM3S_UART1 is not set +CONFIG_LM_UART0=y +# CONFIG_LM_UART1 is not set # CONFIG_SSI0_DISABLE is not set CONFIG_SSI1_DISABLE=y -# CONFIG_LM3S_UART2 is not set -# CONFIG_LM3S_ETHERNET is not set +# CONFIG_LM_UART2 is not set +# CONFIG_LM_ETHERNET is not set # # Disable GPIO Interrupts # -# CONFIG_LM3S_DISABLE_GPIOA_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOB_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOC_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOD_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOE_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOF_IRQS is not set -# CONFIG_LM3S_DISABLE_GPIOG_IRQS is not set -CONFIG_LM3S_DISABLE_GPIOH_IRQS=y -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +# CONFIG_LM_DISABLE_GPIOA_IRQS is not set +# CONFIG_LM_DISABLE_GPIOB_IRQS is not set +# CONFIG_LM_DISABLE_GPIOC_IRQS is not set +# CONFIG_LM_DISABLE_GPIOD_IRQS is not set +# CONFIG_LM_DISABLE_GPIOE_IRQS is not set +# CONFIG_LM_DISABLE_GPIOF_IRQS is not set +# CONFIG_LM_DISABLE_GPIOG_IRQS is not set +CONFIG_LM_DISABLE_GPIOH_IRQS=y +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S SSI Configuration diff --git a/nuttx/configs/lm3s6965-ek/src/lm3s6965ek_internal.h b/nuttx/configs/lm3s6965-ek/src/lm3s6965ek_internal.h index 4cd2eddc7..c2fc50df1 100644 --- a/nuttx/configs/lm3s6965-ek/src/lm3s6965ek_internal.h +++ b/nuttx/configs/lm3s6965-ek/src/lm3s6965ek_internal.h @@ -123,14 +123,14 @@ #ifndef __ASSEMBLY__ /************************************************************************************ - * Name: lm3s_ssiinitialize + * Name: lm_ssiinitialize * * Description: * Called to configure SPI chip select GPIO pins for the LM3S6965 Eval Kit. * ************************************************************************************/ -extern void weak_function lm3s_ssiinitialize(void); +extern void weak_function lm_ssiinitialize(void); #endif /* __ASSEMBLY__ */ #endif /* __CONFIGS_LM3S6965_EK_SRC_LM3S6965EK_INTERNAL_H */ diff --git a/nuttx/configs/lm3s6965-ek/src/up_boot.c b/nuttx/configs/lm3s6965-ek/src/up_boot.c index 7f887be62..7ffd37f17 100644 --- a/nuttx/configs/lm3s6965-ek/src/up_boot.c +++ b/nuttx/configs/lm3s6965-ek/src/up_boot.c @@ -61,7 +61,7 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_boardinitialize + * Name: lm_boardinitialize * * Description: * All LM3S architectures must provide the following entry point. This entry point @@ -69,18 +69,18 @@ * and mapped but before any devices have been initialized. ************************************************************************************/ -void lm3s_boardinitialize(void) +void lm_boardinitialize(void) { /* Configure SPI chip selects if 1) SSI is not disabled, and 2) the weak function - * lm3s_ssiinitialize() has been brought into the link. + * lm_ssiinitialize() has been brought into the link. */ /* The LM3S6965 Eval Kit microSD CS and OLED are on SSI0 (Duh! There is no SSI1) */ #if !defined(CONFIG_SSI0_DISABLE) /* || !defined(CONFIG_SSI1_DISABLE) */ - if (lm3s_ssiinitialize) + if (lm_ssiinitialize) { - lm3s_ssiinitialize(); + lm_ssiinitialize(); } #endif diff --git a/nuttx/configs/lm3s6965-ek/src/up_ethernet.c b/nuttx/configs/lm3s6965-ek/src/up_ethernet.c index 4f402cae7..2d114baaa 100644 --- a/nuttx/configs/lm3s6965-ek/src/up_ethernet.c +++ b/nuttx/configs/lm3s6965-ek/src/up_ethernet.c @@ -63,17 +63,17 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_ethernetmac + * Name: lm_ethernetmac * * Description: * For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile - * USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, this function + * USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function * will obtain the MAC address from these registers. * ************************************************************************************/ -#ifdef CONFIG_LM3S_BOARDMAC -void lm3s_ethernetmac(struct ether_addr *ethaddr) +#ifdef CONFIG_LM_BOARDMAC +void lm_ethernetmac(struct ether_addr *ethaddr) { uint32_t user0; uint32_t user1; diff --git a/nuttx/configs/lm3s6965-ek/src/up_leds.c b/nuttx/configs/lm3s6965-ek/src/up_leds.c index efa1eb738..0e6c5e50f 100644 --- a/nuttx/configs/lm3s6965-ek/src/up_leds.c +++ b/nuttx/configs/lm3s6965-ek/src/up_leds.c @@ -72,7 +72,7 @@ /* Dump GPIO registers */ #ifdef LED_DEBUG -# define led_dumpgpio(m) lm3s_dumpgpio(LED_GPIO, m) +# define led_dumpgpio(m) lm_dumpgpio(LED_GPIO, m) #else # define led_dumpgpio(m) #endif @@ -102,9 +102,9 @@ void up_ledinit(void) /* Configure Port E, Bit 1 as an output, initial value=OFF */ - led_dumpgpio("up_ledinit before lm3s_configgpio()"); - lm3s_configgpio(LED_GPIO); - led_dumpgpio("up_ledinit after lm3s_configgpio()"); + led_dumpgpio("up_ledinit before lm_configgpio()"); + lm_configgpio(LED_GPIO); + led_dumpgpio("up_ledinit after lm_configgpio()"); g_nest = 0; } @@ -128,9 +128,9 @@ void up_ledon(int led) g_nest++; case LED_IRQSENABLED: case LED_STACKCREATED: - led_dumpgpio("up_ledon: before lm3s_gpiowrite()"); - lm3s_gpiowrite(LED_GPIO, false); - led_dumpgpio("up_ledon: after lm3s_gpiowrite()"); + led_dumpgpio("up_ledon: before lm_gpiowrite()"); + lm_gpiowrite(LED_GPIO, false); + led_dumpgpio("up_ledon: after lm_gpiowrite()"); break; } } @@ -156,9 +156,9 @@ void up_ledoff(int led) case LED_PANIC: if (--g_nest <= 0) { - led_dumpgpio("up_ledoff: before lm3s_gpiowrite()"); - lm3s_gpiowrite(LED_GPIO, true); - led_dumpgpio("up_ledoff: after lm3s_gpiowrite()"); + led_dumpgpio("up_ledoff: before lm_gpiowrite()"); + lm_gpiowrite(LED_GPIO, true); + led_dumpgpio("up_ledoff: after lm_gpiowrite()"); } break; } diff --git a/nuttx/configs/lm3s6965-ek/src/up_oled.c b/nuttx/configs/lm3s6965-ek/src/up_oled.c index 23ce7e036..07e7859b4 100644 --- a/nuttx/configs/lm3s6965-ek/src/up_oled.c +++ b/nuttx/configs/lm3s6965-ek/src/up_oled.c @@ -72,8 +72,8 @@ #ifdef CONFIG_LCD_RITDEBUG # define ritdbg(format, arg...) vdbg(format, ##arg) -# define oleddc_dumpgpio(m) lm3s_dumpgpio(OLEDDC_GPIO, m) -# define oledcs_dumpgpio(m) lm3s_dumpgpio(OLEDCS_GPIO, m) +# define oleddc_dumpgpio(m) lm_dumpgpio(OLEDDC_GPIO, m) +# define oledcs_dumpgpio(m) lm_dumpgpio(OLEDCS_GPIO, m) #else # define ritdbg(x...) # define oleddc_dumpgpio(m) @@ -102,8 +102,8 @@ FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno) oledcs_dumpgpio("up_nxdrvinit: After OLEDCS setup"); oleddc_dumpgpio("up_nxdrvinit: On entry"); - lm3s_configgpio(OLEDDC_GPIO); /* PC7: OLED display data/control select (D/Cn) */ - lm3s_configgpio(OLEDEN_GPIO); /* PC6: Enable +15V needed by OLED (EN+15V) */ + lm_configgpio(OLEDDC_GPIO); /* PC7: OLED display data/control select (D/Cn) */ + lm_configgpio(OLEDEN_GPIO); /* PC6: Enable +15V needed by OLED (EN+15V) */ oleddc_dumpgpio("up_nxdrvinit: After OLEDDC/EN setup"); @@ -137,7 +137,7 @@ FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno) } /****************************************************************************** - * Name: lm3s_spicmddata + * Name: lm_spicmddata * * Description: * Set or clear the SD1329 D/Cn bit to select data (true) or command @@ -159,13 +159,13 @@ FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno) * ******************************************************************************/ -int lm3s_spicmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd) +int lm_spicmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd) { if (devid == SPIDEV_DISPLAY) { /* Set GPIO to 1 for data, 0 for command */ - lm3s_gpiowrite(OLEDDC_GPIO, !cmd); + lm_gpiowrite(OLEDDC_GPIO, !cmd); return OK; } return -ENODEV; diff --git a/nuttx/configs/lm3s6965-ek/src/up_ssi.c b/nuttx/configs/lm3s6965-ek/src/up_ssi.c index b52116f14..92138f3a6 100644 --- a/nuttx/configs/lm3s6965-ek/src/up_ssi.c +++ b/nuttx/configs/lm3s6965-ek/src/up_ssi.c @@ -81,7 +81,7 @@ /* Dump GPIO registers */ #ifdef SSI_VERBOSE -# define ssi_dumpgpio(m) lm3s_dumpgpio(SDCCS_GPIO, m) +# define ssi_dumpgpio(m) lm_dumpgpio(SDCCS_GPIO, m) #else # define ssi_dumpgpio(m) #endif @@ -95,33 +95,33 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_ssiinitialize + * Name: lm_ssiinitialize * * Description: * Called to configure SPI chip select GPIO pins for the LM3S6965 Eval Kit. * ************************************************************************************/ -void weak_function lm3s_ssiinitialize(void) +void weak_function lm_ssiinitialize(void) { /* Configure the SPI-based microSD CS GPIO */ - ssi_dumpgpio("lm3s_ssiinitialize() Entry)"); - lm3s_configgpio(SDCCS_GPIO); + ssi_dumpgpio("lm_ssiinitialize() Entry)"); + lm_configgpio(SDCCS_GPIO); #ifdef CONFIG_NX_LCDDRIVER - lm3s_configgpio(OLEDCS_GPIO); + lm_configgpio(OLEDCS_GPIO); #endif - ssi_dumpgpio("lm3s_ssiinitialize() Exit"); + ssi_dumpgpio("lm_ssiinitialize() Exit"); } /**************************************************************************** - * The external functions, lm3s_spiselect and lm3s_spistatus must be provided + * The external functions, lm_spiselect and lm_spistatus must be provided * by board-specific logic. The are implementations of the select and status * methods SPI interface defined by struct spi_ops_s (see include/nuttx/spi.h). * All othermethods (including up_spiinitialize()) are provided by common * logic. To use this common SPI logic on your board: * - * 1. Provide lm3s_spiselect() and lm3s_spistatus() functions in your + * 1. Provide lm_spiselect() and lm_spistatus() functions in your * board-specific logic. This function will perform chip selection and * status operations using GPIOs in the way your board is configured. * 2. Add a call to up_spiinitialize() in your low level initialization @@ -133,29 +133,29 @@ void weak_function lm3s_ssiinitialize(void) * ****************************************************************************/ -void lm3s_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) +void lm_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) { ssidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); - ssi_dumpgpio("lm3s_spiselect() Entry"); + ssi_dumpgpio("lm_spiselect() Entry"); if (devid == SPIDEV_MMCSD) { /* Assert the CS pin to the card */ - lm3s_gpiowrite(SDCCS_GPIO, !selected); + lm_gpiowrite(SDCCS_GPIO, !selected); } #ifdef CONFIG_NX_LCDDRIVER else if (devid == SPIDEV_DISPLAY) { /* Assert the CS pin to the display */ - lm3s_gpiowrite(OLEDCS_GPIO, !selected); + lm_gpiowrite(OLEDCS_GPIO, !selected); } #endif - ssi_dumpgpio("lm3s_spiselect() Exit"); + ssi_dumpgpio("lm_spiselect() Exit"); } -uint8_t lm3s_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) +uint8_t lm_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) { ssidbg("Returning SPI_STATUS_PRESENT\n"); return SPI_STATUS_PRESENT; diff --git a/nuttx/configs/lm3s8962-ek/README.txt b/nuttx/configs/lm3s8962-ek/README.txt index 0f796e38d..38ed76aea 100644 --- a/nuttx/configs/lm3s8962-ek/README.txt +++ b/nuttx/configs/lm3s8962-ek/README.txt @@ -126,12 +126,12 @@ GNU Toolchain Options the CodeSourcery or devkitARM, you simply need to add one of the following configuration options to your .config (or defconfig) file: - CONFIG_LM3S_CODESOURCERYW=y : CodeSourcery under Windows - CONFIG_LM3S_CODESOURCERYL=y : CodeSourcery under Linux - CONFIG_LM3S_DEVKITARM=y : devkitARM under Windows - CONFIG_LM3S_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) + CONFIG_LM_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_LM_CODESOURCERYL=y : CodeSourcery under Linux + CONFIG_LM_DEVKITARM=y : devkitARM under Windows + CONFIG_LM_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) - If you are not using CONFIG_LM3S_BUILDROOT, then you may also have to modify + If you are not using CONFIG_LM_BUILDROOT, then you may also have to modify the PATH in the setenv.h file if your make cannot find the tools. NOTE: the CodeSourcery (for Windows) and devkitARM are Windows native toolchains. @@ -399,15 +399,15 @@ Stellaris LM3S8962 Evaluation Kit Configuration Options Additional interrupt support can be disabled if desired to reduce memory footprint. - CONFIG_LM3S_DISABLE_GPIOA_IRQS=n - CONFIG_LM3S_DISABLE_GPIOB_IRQS=n - CONFIG_LM3S_DISABLE_GPIOC_IRQS=n - CONFIG_LM3S_DISABLE_GPIOD_IRQS=n - CONFIG_LM3S_DISABLE_GPIOE_IRQS=n - CONFIG_LM3S_DISABLE_GPIOF_IRQS=n - CONFIG_LM3S_DISABLE_GPIOG_IRQS=n - CONFIG_LM3S_DISABLE_GPIOH_IRQS=n - CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y + CONFIG_LM_DISABLE_GPIOA_IRQS=n + CONFIG_LM_DISABLE_GPIOB_IRQS=n + CONFIG_LM_DISABLE_GPIOC_IRQS=n + CONFIG_LM_DISABLE_GPIOD_IRQS=n + CONFIG_LM_DISABLE_GPIOE_IRQS=n + CONFIG_LM_DISABLE_GPIOF_IRQS=n + CONFIG_LM_DISABLE_GPIOG_IRQS=n + CONFIG_LM_DISABLE_GPIOH_IRQS=n + CONFIG_LM_DISABLE_GPIOJ_IRQS=y LM3S6818 specific device driver settings @@ -432,18 +432,18 @@ Stellaris LM3S8962 Evaluation Kit Configuration Options value is large, then larger values of this setting may cause Rx FIFO overrun errors. Default: half of the Tx FIFO size (4). - CONFIG_LM3S_ETHERNET - This must be set (along with CONFIG_NET) + CONFIG_LM_ETHERNET - This must be set (along with CONFIG_NET) to build the LM3S Ethernet driver - CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board. - CONFIG_LM3S_BOARDMAC - If the board-specific logic can provide + CONFIG_LM_ETHLEDS - Enable to use Ethernet LEDs on the board. + CONFIG_LM_BOARDMAC - If the board-specific logic can provide a MAC address (via lm_ethernetmac()), then this should be selected. - CONFIG_LM3S_ETHHDUPLEX - Set to force half duplex operation - CONFIG_LM3S_ETHNOAUTOCRC - Set to suppress auto-CRC generation - CONFIG_LM3S_ETHNOPAD - Set to suppress Tx padding - CONFIG_LM3S_MULTICAST - Set to enable multicast frames - CONFIG_LM3S_PROMISCUOUS - Set to enable promiscuous mode - CONFIG_LM3S_BADCRC - Set to enable bad CRC rejection. - CONFIG_LM3S_DUMPPACKET - Dump each packet received/sent to the console. + CONFIG_LM_ETHHDUPLEX - Set to force half duplex operation + CONFIG_LM_ETHNOAUTOCRC - Set to suppress auto-CRC generation + CONFIG_LM_ETHNOPAD - Set to suppress Tx padding + CONFIG_LM_MULTICAST - Set to enable multicast frames + CONFIG_LM_PROMISCUOUS - Set to enable promiscuous mode + CONFIG_LM_BADCRC - Set to enable bad CRC rejection. + CONFIG_LM_DUMPPACKET - Dump each packet received/sent to the console. Configurations ^^^^^^^^^^^^^^ diff --git a/nuttx/configs/lm3s8962-ek/include/board.h b/nuttx/configs/lm3s8962-ek/include/board.h index 0b03f96f0..4d6a0c302 100644 --- a/nuttx/configs/lm3s8962-ek/include/board.h +++ b/nuttx/configs/lm3s8962-ek/include/board.h @@ -112,7 +112,7 @@ #ifndef __ASSEMBLY__ /************************************************************************************ - * Name: lm3s_boardinitialize + * Name: lm_boardinitialize * * Description: * All LM3S architectures must provide the following entry point. This entry point @@ -121,21 +121,21 @@ * ************************************************************************************/ -extern void lm3s_boardinitialize(void); +extern void lm_boardinitialize(void); /************************************************************************************ - * Name: lm3s_ethernetmac + * Name: lm_ethernetmac * * Description: * For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile - * USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, this function + * USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function * will obtain the MAC address from these registers. * ************************************************************************************/ -#ifdef CONFIG_LM3S_BOARDMAC +#ifdef CONFIG_LM_BOARDMAC struct ether_addr; -extern void lm3s_ethernetmac(struct ether_addr *ethaddr); +extern void lm_ethernetmac(struct ether_addr *ethaddr); #endif #endif /* __ASSEMBLY__ */ diff --git a/nuttx/configs/lm3s8962-ek/nsh/defconfig b/nuttx/configs/lm3s8962-ek/nsh/defconfig index 1d3df2fa7..4a35f8d4a 100755 --- a/nuttx/configs/lm3s8962-ek/nsh/defconfig +++ b/nuttx/configs/lm3s8962-ek/nsh/defconfig @@ -56,32 +56,32 @@ CONFIG_ARCH_CALIBRATION=n # # Identify toolchain and linker options # -CONFIG_LM3S_CODESOURCERYW=n -CONFIG_LM3S_CODESOURCERYL=n -CONFIG_LM3S_DEVKITARM=n -CONFIG_LM3S_BUILDROOT=y -CONFIG_LM3S_DFU=y +CONFIG_LM_CODESOURCERYW=n +CONFIG_LM_CODESOURCERYL=n +CONFIG_LM_DEVKITARM=n +CONFIG_LM_BUILDROOT=y +CONFIG_LM_DFU=y # # Disable support for interrupts on GPIOH and GPIOJ which do not # exist on the LM3S6B96. Additional interrupt support can be # disabled if desired to reduce memory footprint. -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=n -CONFIG_LM3S_DISABLE_GPIOD_IRQS=n -CONFIG_LM3S_DISABLE_GPIOE_IRQS=n -CONFIG_LM3S_DISABLE_GPIOF_IRQS=n -CONFIG_LM3S_DISABLE_GPIOG_IRQS=n -CONFIG_LM3S_DISABLE_GPIOH_IRQS=y -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=n +CONFIG_LM_DISABLE_GPIOD_IRQS=n +CONFIG_LM_DISABLE_GPIOE_IRQS=n +CONFIG_LM_DISABLE_GPIOF_IRQS=n +CONFIG_LM_DISABLE_GPIOG_IRQS=n +CONFIG_LM_DISABLE_GPIOH_IRQS=y +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S8962 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=n -CONFIG_LM3S_UART2=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=n +CONFIG_LM_UART2=n CONFIG_UART0_SERIAL_CONSOLE=y CONFIG_UART1_SERIAL_CONSOLE=n CONFIG_UART2_SERIAL_CONSOLE=n @@ -115,16 +115,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S8962 specific serial device driver settings # -CONFIG_LM3S_ETHERNET=y -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=n -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=y +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=n +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/lm3s8962-ek/nx/defconfig b/nuttx/configs/lm3s8962-ek/nx/defconfig index 37fc8903d..3ca6ade21 100755 --- a/nuttx/configs/lm3s8962-ek/nx/defconfig +++ b/nuttx/configs/lm3s8962-ek/nx/defconfig @@ -56,32 +56,32 @@ CONFIG_ARCH_CALIBRATION=n # # Identify toolchain and linker options # -CONFIG_LM3S_CODESOURCERYW=n -CONFIG_LM3S_CODESOURCERYL=n -CONFIG_LM3S_DEVKITARM=n -CONFIG_LM3S_BUILDROOT=y -CONFIG_LM3S_DFU=y +CONFIG_LM_CODESOURCERYW=n +CONFIG_LM_CODESOURCERYL=n +CONFIG_LM_DEVKITARM=n +CONFIG_LM_BUILDROOT=y +CONFIG_LM_DFU=y # # Disable support for interrupts on GPIOH and GPIOJ which do not # exist on the LM3S6B96. Additional interrupt support can be # disabled if desired to reduce memory footprint. -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=n -CONFIG_LM3S_DISABLE_GPIOD_IRQS=n -CONFIG_LM3S_DISABLE_GPIOE_IRQS=n -CONFIG_LM3S_DISABLE_GPIOF_IRQS=n -CONFIG_LM3S_DISABLE_GPIOG_IRQS=n -CONFIG_LM3S_DISABLE_GPIOH_IRQS=y -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=n +CONFIG_LM_DISABLE_GPIOD_IRQS=n +CONFIG_LM_DISABLE_GPIOE_IRQS=n +CONFIG_LM_DISABLE_GPIOF_IRQS=n +CONFIG_LM_DISABLE_GPIOG_IRQS=n +CONFIG_LM_DISABLE_GPIOH_IRQS=y +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S8962 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=n -CONFIG_LM3S_UART2=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=n +CONFIG_LM_UART2=n CONFIG_UART0_SERIAL_CONSOLE=y CONFIG_UART1_SERIAL_CONSOLE=n CONFIG_UART2_SERIAL_CONSOLE=n @@ -115,16 +115,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S8962 specific serial device driver settings # -CONFIG_LM3S_ETHERNET=n -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=n +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=y +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/lm3s8962-ek/ostest/defconfig b/nuttx/configs/lm3s8962-ek/ostest/defconfig index 731003fd0..169ac9c8f 100755 --- a/nuttx/configs/lm3s8962-ek/ostest/defconfig +++ b/nuttx/configs/lm3s8962-ek/ostest/defconfig @@ -56,32 +56,32 @@ CONFIG_ARCH_CALIBRATION=n # # Identify toolchain and linker options # -CONFIG_LM3S_CODESOURCERYW=n -CONFIG_LM3S_CODESOURCERYL=n -CONFIG_LM3S_DEVKITARM=n -CONFIG_LM3S_BUILDROOT=y -CONFIG_LM3S_DFU=y +CONFIG_LM_CODESOURCERYW=n +CONFIG_LM_CODESOURCERYL=n +CONFIG_LM_DEVKITARM=n +CONFIG_LM_BUILDROOT=y +CONFIG_LM_DFU=y # # Disable support for interrupts on GPIOH and GPIOJ which do not # exist on the LM3S6B96. Additional interrupt support can be # disabled if desired to reduce memory footprint. -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=n -CONFIG_LM3S_DISABLE_GPIOD_IRQS=n -CONFIG_LM3S_DISABLE_GPIOE_IRQS=n -CONFIG_LM3S_DISABLE_GPIOF_IRQS=n -CONFIG_LM3S_DISABLE_GPIOG_IRQS=n -CONFIG_LM3S_DISABLE_GPIOH_IRQS=y -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=n +CONFIG_LM_DISABLE_GPIOD_IRQS=n +CONFIG_LM_DISABLE_GPIOE_IRQS=n +CONFIG_LM_DISABLE_GPIOF_IRQS=n +CONFIG_LM_DISABLE_GPIOG_IRQS=n +CONFIG_LM_DISABLE_GPIOH_IRQS=y +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S8962 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=n -CONFIG_LM3S_UART2=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=n +CONFIG_LM_UART2=n CONFIG_UART0_SERIAL_CONSOLE=y CONFIG_UART1_SERIAL_CONSOLE=n CONFIG_UART2_SERIAL_CONSOLE=n @@ -115,16 +115,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S8962 specific serial device driver settings # -CONFIG_LM3S_ETHERNET=n -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=n +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=y +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/lm3s8962-ek/src/lm3s8962ek_internal.h b/nuttx/configs/lm3s8962-ek/src/lm3s8962ek_internal.h index 689472f15..7fc8fa331 100644 --- a/nuttx/configs/lm3s8962-ek/src/lm3s8962ek_internal.h +++ b/nuttx/configs/lm3s8962-ek/src/lm3s8962ek_internal.h @@ -123,14 +123,14 @@ #ifndef __ASSEMBLY__ /************************************************************************************ - * Name: lm3s_ssiinitialize + * Name: lm_ssiinitialize * * Description: * Called to configure SPI chip select GPIO pins for the LM3S8962 Eval Kit. * ************************************************************************************/ -extern void weak_function lm3s_ssiinitialize(void); +extern void weak_function lm_ssiinitialize(void); #endif /* __ASSEMBLY__ */ #endif /* __CONFIGS_LM3S8962_EK_SRC_LM3S8962EK_INTERNAL_H */ diff --git a/nuttx/configs/lm3s8962-ek/src/up_boot.c b/nuttx/configs/lm3s8962-ek/src/up_boot.c index 0a976e857..8dc5b81cc 100644 --- a/nuttx/configs/lm3s8962-ek/src/up_boot.c +++ b/nuttx/configs/lm3s8962-ek/src/up_boot.c @@ -61,7 +61,7 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_boardinitialize + * Name: lm_boardinitialize * * Description: * All LM3S architectures must provide the following entry point. This entry point @@ -69,18 +69,18 @@ * and mapped but before any devices have been initialized. ************************************************************************************/ -void lm3s_boardinitialize(void) +void lm_boardinitialize(void) { /* Configure SPI chip selects if 1) SSI is not disabled, and 2) the weak function - * lm3s_ssiinitialize() has been brought into the link. + * lm_ssiinitialize() has been brought into the link. */ /* The LM3S8962 Eval Kit microSD CS and OLED are on SSI0 (Duh! There is no SSI1) */ #if !defined(CONFIG_SSI0_DISABLE) /* || !defined(CONFIG_SSI1_DISABLE) */ - if (lm3s_ssiinitialize) + if (lm_ssiinitialize) { - lm3s_ssiinitialize(); + lm_ssiinitialize(); } #endif diff --git a/nuttx/configs/lm3s8962-ek/src/up_ethernet.c b/nuttx/configs/lm3s8962-ek/src/up_ethernet.c index 2cad50bef..0d73233a4 100644 --- a/nuttx/configs/lm3s8962-ek/src/up_ethernet.c +++ b/nuttx/configs/lm3s8962-ek/src/up_ethernet.c @@ -63,17 +63,17 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_ethernetmac + * Name: lm_ethernetmac * * Description: * For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile - * USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, this function + * USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function * will obtain the MAC address from these registers. * ************************************************************************************/ -#ifdef CONFIG_LM3S_BOARDMAC -void lm3s_ethernetmac(struct ether_addr *ethaddr) +#ifdef CONFIG_LM_BOARDMAC +void lm_ethernetmac(struct ether_addr *ethaddr) { uint32_t user0; uint32_t user1; diff --git a/nuttx/configs/lm3s8962-ek/src/up_leds.c b/nuttx/configs/lm3s8962-ek/src/up_leds.c index d5000d037..a20617f1e 100644 --- a/nuttx/configs/lm3s8962-ek/src/up_leds.c +++ b/nuttx/configs/lm3s8962-ek/src/up_leds.c @@ -72,7 +72,7 @@ /* Dump GPIO registers */ #ifdef LED_DEBUG -# define led_dumpgpio(m) lm3s_dumpgpio(LED_GPIO, m) +# define led_dumpgpio(m) lm_dumpgpio(LED_GPIO, m) #else # define led_dumpgpio(m) #endif @@ -102,9 +102,9 @@ void up_ledinit(void) /* Configure Port E, Bit 1 as an output, initial value=OFF */ - led_dumpgpio("up_ledinit before lm3s_configgpio()"); - lm3s_configgpio(LED_GPIO); - led_dumpgpio("up_ledinit after lm3s_configgpio()"); + led_dumpgpio("up_ledinit before lm_configgpio()"); + lm_configgpio(LED_GPIO); + led_dumpgpio("up_ledinit after lm_configgpio()"); g_nest = 0; } @@ -128,9 +128,9 @@ void up_ledon(int led) g_nest++; case LED_IRQSENABLED: case LED_STACKCREATED: - led_dumpgpio("up_ledon: before lm3s_gpiowrite()"); - lm3s_gpiowrite(LED_GPIO, false); - led_dumpgpio("up_ledon: after lm3s_gpiowrite()"); + led_dumpgpio("up_ledon: before lm_gpiowrite()"); + lm_gpiowrite(LED_GPIO, false); + led_dumpgpio("up_ledon: after lm_gpiowrite()"); break; } } @@ -156,9 +156,9 @@ void up_ledoff(int led) case LED_PANIC: if (--g_nest <= 0) { - led_dumpgpio("up_ledoff: before lm3s_gpiowrite()"); - lm3s_gpiowrite(LED_GPIO, true); - led_dumpgpio("up_ledoff: after lm3s_gpiowrite()"); + led_dumpgpio("up_ledoff: before lm_gpiowrite()"); + lm_gpiowrite(LED_GPIO, true); + led_dumpgpio("up_ledoff: after lm_gpiowrite()"); } break; } diff --git a/nuttx/configs/lm3s8962-ek/src/up_oled.c b/nuttx/configs/lm3s8962-ek/src/up_oled.c index 3324b3897..05934e8bd 100644 --- a/nuttx/configs/lm3s8962-ek/src/up_oled.c +++ b/nuttx/configs/lm3s8962-ek/src/up_oled.c @@ -72,8 +72,8 @@ #ifdef CONFIG_LCD_RITDEBUG # define ritdbg(format, arg...) vdbg(format, ##arg) -# define oleddc_dumpgpio(m) lm3s_dumpgpio(OLEDDC_GPIO, m) -# define oledcs_dumpgpio(m) lm3s_dumpgpio(OLEDCS_GPIO, m) +# define oleddc_dumpgpio(m) lm_dumpgpio(OLEDDC_GPIO, m) +# define oledcs_dumpgpio(m) lm_dumpgpio(OLEDCS_GPIO, m) #else # define ritdbg(x...) # define oleddc_dumpgpio(m) @@ -102,8 +102,8 @@ FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno) oledcs_dumpgpio("up_nxdrvinit: After OLEDCS setup"); oleddc_dumpgpio("up_nxdrvinit: On entry"); - lm3s_configgpio(OLEDDC_GPIO); /* PC7: OLED display data/control select (D/Cn) */ - lm3s_configgpio(OLEDEN_GPIO); /* PC6: Enable +15V needed by OLED (EN+15V) */ + lm_configgpio(OLEDDC_GPIO); /* PC7: OLED display data/control select (D/Cn) */ + lm_configgpio(OLEDEN_GPIO); /* PC6: Enable +15V needed by OLED (EN+15V) */ oleddc_dumpgpio("up_nxdrvinit: After OLEDDC/EN setup"); @@ -137,7 +137,7 @@ FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno) } /****************************************************************************** - * Name: lm3s_spicmddata + * Name: lm_spicmddata * * Description: * Set or clear the SD1329 D/Cn bit to select data (true) or command @@ -159,13 +159,13 @@ FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno) * ******************************************************************************/ -int lm3s_spicmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd) +int lm_spicmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd) { if (devid == SPIDEV_DISPLAY) { /* Set GPIO to 1 for data, 0 for command */ - lm3s_gpiowrite(OLEDDC_GPIO, !cmd); + lm_gpiowrite(OLEDDC_GPIO, !cmd); return OK; } return -ENODEV; diff --git a/nuttx/configs/lm3s8962-ek/src/up_ssi.c b/nuttx/configs/lm3s8962-ek/src/up_ssi.c index 7f78b3477..50344857a 100644 --- a/nuttx/configs/lm3s8962-ek/src/up_ssi.c +++ b/nuttx/configs/lm3s8962-ek/src/up_ssi.c @@ -81,7 +81,7 @@ /* Dump GPIO registers */ #ifdef SSI_VERBOSE -# define ssi_dumpgpio(m) lm3s_dumpgpio(SDCCS_GPIO, m) +# define ssi_dumpgpio(m) lm_dumpgpio(SDCCS_GPIO, m) #else # define ssi_dumpgpio(m) #endif @@ -95,33 +95,33 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_ssiinitialize + * Name: lm_ssiinitialize * * Description: * Called to configure SPI chip select GPIO pins for the LM3S8962 Eval Kit. * ************************************************************************************/ -void weak_function lm3s_ssiinitialize(void) +void weak_function lm_ssiinitialize(void) { /* Configure the SPI-based microSD CS GPIO */ - ssi_dumpgpio("lm3s_ssiinitialize() Entry)"); - lm3s_configgpio(SDCCS_GPIO); + ssi_dumpgpio("lm_ssiinitialize() Entry)"); + lm_configgpio(SDCCS_GPIO); #ifdef CONFIG_NX_LCDDRIVER - lm3s_configgpio(OLEDCS_GPIO); + lm_configgpio(OLEDCS_GPIO); #endif - ssi_dumpgpio("lm3s_ssiinitialize() Exit"); + ssi_dumpgpio("lm_ssiinitialize() Exit"); } /**************************************************************************** - * The external functions, lm3s_spiselect and lm3s_spistatus must be provided + * The external functions, lm_spiselect and lm_spistatus must be provided * by board-specific logic. The are implementations of the select and status * methods SPI interface defined by struct spi_ops_s (see include/nuttx/spi.h). * All othermethods (including up_spiinitialize()) are provided by common * logic. To use this common SPI logic on your board: * - * 1. Provide lm3s_spiselect() and lm3s_spistatus() functions in your + * 1. Provide lm_spiselect() and lm_spistatus() functions in your * board-specific logic. This function will perform chip selection and * status operations using GPIOs in the way your board is configured. * 2. Add a call to up_spiinitialize() in your low level initialization @@ -133,29 +133,29 @@ void weak_function lm3s_ssiinitialize(void) * ****************************************************************************/ -void lm3s_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) +void lm_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) { ssidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); - ssi_dumpgpio("lm3s_spiselect() Entry"); + ssi_dumpgpio("lm_spiselect() Entry"); if (devid == SPIDEV_MMCSD) { /* Assert the CS pin to the card */ - lm3s_gpiowrite(SDCCS_GPIO, !selected); + lm_gpiowrite(SDCCS_GPIO, !selected); } #ifdef CONFIG_NX_LCDDRIVER else if (devid == SPIDEV_DISPLAY) { /* Assert the CS pin to the display */ - lm3s_gpiowrite(OLEDCS_GPIO, !selected); + lm_gpiowrite(OLEDCS_GPIO, !selected); } #endif - ssi_dumpgpio("lm3s_spiselect() Exit"); + ssi_dumpgpio("lm_spiselect() Exit"); } -uint8_t lm3s_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) +uint8_t lm_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) { ssidbg("Returning SPI_STATUS_PRESENT\n"); return SPI_STATUS_PRESENT; |