z16f ostest config

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@543 42af7a65-404d-4744-a932-0658087f49c3

4 files changed, 610 insertions, 0 deletions

diff --git a/nuttx/configs/z16f2800100zcog/ostest/Make.defs b/nuttx/configs/z16f2800100zcog/ostest/Make.defs
new file mode 100644
index 000000000..4186f75ed
--- /dev/null
+++ b/nuttx/configs/z16f2800100zcog/ostest/Make.defs
@@ -0,0 +1,156 @@
+############################################################################
+# configs/z16f2800100zcog/Make.defs
+#
+#   Copyright (C) 2008 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+# These are the directories where the ZNeo-II toolchain is installed
+
+ZDSINSTALLDIR		:= C:/Program\ Files/ZiLOG/ZDSII_ZNEO_4.11.0
+ZDSBINDIR		:= $(ZDSINSTALLDIR)/bin
+ZDSSTDINCDIR		:= $(ZDSINSTALLDIR)/include/std
+ZDSZILOGINCDIR		:= $(ZDSINSTALLDIR)/include/zilog
+
+# These are the same directories but with the directory separator
+# character swapped as needed by the ZNeo-II compiler
+
+WTOPDIR 		:= ${shell cygpath -w $(TOPDIR)}
+WZDSSTDINCDIR		:= ${shell cygpath -w $(ZDSSTDINCDIR)}
+WZDSZILOGINCDIR 	:= ${shell cygpath -w $(ZDSZILOGINCDIR)}
+
+# Escaped versions
+
+ETOPDIR 		:= ${shell echo "$(WTOPDIR)" | sed -e "s/ /%20/g"}
+EZDSSTDINCDIR		:= ${shell echo "$(WZDSSTDINCDIR)" | sed -e "s/ /%20/g"}
+EZDSZILOGINCDIR 	:= ${shell echo "$(WZDSZILOGINCDIR)" | sed -e "s/ /%20/g"}
+
+# Assembler definitions
+
+ifeq ("${CONFIG_DEBUG}","y")
+  ARCHASMOPTIMIZATION	= -debug
+else
+  ARCHASMOPTIMIZATION	= -nodebug
+endif
+
+ARCHASMCPUFLAGS 	= -cpu:Z16F2811AL -NOigcase
+ARCHASMLIST		= -NOlistmac -name -pagelen:56 -pagewidth:80 -quiet
+ARCHASMWARNINGS 	= -warn
+ARCHASMDEFINES		= -define:_Z16F2811AL=1 -define:_Z16K_SERIES=1 -define:_Z16F_SERIES=1 \ 				  -define:__ASSEMBLY__
+ARCHASMINCLUDES 	= -include:'$(ETOPDIR)\include;$(EZDSSTDINCDIR);$(EZDSZILOGINCDIR)'
+AFLAGS			= $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMLIST) \
+			  $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)
+
+# Compiler definitions
+
+ifeq ("${CONFIG_DEBUG}","y")
+  ARCHOPTIMIZATION	= -debug -NOregvar -reduceopt
+else
+  ARCHOPTIMIZATION	= -nodebug -regvar
+endif
+
+ARCHCPUFLAGS		= -chartype:S -model:L -NOmodsect -cpu:Z16F2811AL \
+			  -asmsw:" $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)"
+ARCHLIST		= -NOgenprint -keeplst -NOlist -NOlistinc -NOkeepasm
+ARCHPICFLAGS		=
+ARCHWARNINGS		= -warn
+ARCHDEFINES		= -define:_Z16F2811AL -define:_Z16K_SERIES \
+			  -define:_Z16F_SERIES
+ARCHSTDINCLUDES 	= -stdinc:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)'
+ARCHUSRINCLUDES 	= -usrinc:'.'
+ARCHINCLUDES		= $(ARCHSTDINCLUDES) $(ARCHUSRINCLUDES)
+CFLAGS			= $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
+			  $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES)
+
+# Librarian definitions
+
+ARFLAGS 		= -quiet -warn
+
+# Linker definitions
+
+LINKCMDTEMPLATE 	= $(TOPDIR)/configs/z16f2800100zcog/ostest/ostest.linkcmd
+
+# Tool names/pathes
+
+CROSSDEV		=
+CC			= $(ZDSBINDIR)/zneocc.exe
+CPP			= $(ZDSBINDIR)/zneoasm.exe
+LD			= $(ZDSBINDIR)/zneolink.exe
+AS			= $(ZDSBINDIR)/zneoasm.exe
+AR			= $(ZDSBINDIR)/zneolib.exe
+
+# File extensions
+
+ASMEXT			= .asm
+OBJEXT			= .obj
+LIBEXT			= .lib
+EXEEXT			= .hex
+
+# These are the macros that will be used in the NuttX make system
+# to compile and assembly source files and to insert the resulting
+# object files into an archive
+
+define COMPILE
+	@echo "CC: $1"
+	@$(CC) $(CFLAGS) $1
+endef
+
+define ASSEMBLE
+	@echo "AS: $1"
+	@$(AS) -c $(AFLAGS) $1
+endef
+
+define ARCHIVE
+	echo "AR: $2"; \
+	$(AR) $(ARFLAGS) $1=-+$2 || { echo "$(AR) $1=-+$2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+	@rm -f *.obj *.src *.lib *.hex
+endef
+
+# This is the tool to use for dependencies (i.e., none)
+
+MKDEP			= $(TOPDIR)/tools/mknulldeps.sh
+
+# ZNeo-II cannot follow Cygwin soft links, so we will have to use directory copies
+
+DIRLINK 		= $(TOPDIR)/tools/winlink.sh
+DIRUNLINK		= $(TOPDIR)/tools/unlink.sh
+
+# Linux/Cygwin host tool definitions
+
+HOSTCC			= gcc
+HOSTINCLUDES		= -I.
+HOSTCFLAGS		= -Wall -wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS		=
diff --git a/nuttx/configs/z16f2800100zcog/ostest/defconfig b/nuttx/configs/z16f2800100zcog/ostest/defconfig
new file mode 100644
index 000000000..7b6c85b31
--- /dev/null
+++ b/nuttx/configs/z16f2800100zcog/ostest/defconfig
@@ -0,0 +1,312 @@
+############################################################
+# configs/z16f2800100zcog/defconfig
+#
+#   Copyright (C) 2008 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################
+#
+# Architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+#   processor architecture.
+# CONFIG_ARCH_Z16 - Set if processor is Z16
+# CONFIG_ARCH_CHIP - Identifies the specific chip
+# CONFIG_ARCH_CHIP_Z16F - Set if this the Z16F
+# CONFIG_ARCH_CHIP_Z16F2810 - Identifies chip variant
+# CONFIG_ARCH_CHIP_Z16F2811
+# CONFIG_ARCH_CHIP_Z16F3211
+# CONFIG_ARCH_CHIP_Z16F6411
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+#   the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+#
+CONFIG_ARCH=z16
+CONFIG_ARCH_Z16=y
+CONFIG_ARCH_CHIP=z16f
+CONFIG_ARCH_CHIP_Z16F=y
+CONFIG_ARCH_CHIP_Z16F2810=n
+CONFIG_ARCH_CHIP_Z16F2811=y
+CONFIG_ARCH_CHIP_Z16F3211=n
+CONFIG_ARCH_CHIP_Z16F6411=n
+CONFIG_ARCH_BOARD=z16f2800100zcog
+CONFIG_ARCH_BOARD_Z16F2800100ZCOG=y
+CONFIG_DRAM_SIZE=65536
+
+#
+# Z16F specific device driver settings
+#
+# CONFIG_UART_RXBUFSIZE - Characters are buffered as received.
+#   This specific the size of the receive buffer
+# CONFIG_UART_TXBUFSIZE - Characters are buffered before
+#   being sent.  This specific the size of the transmit buffer
+#
+CONFIG_UART_RXBUFSIZE=0
+CONFIG_UART_TXBUFSIZE=0
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+#   BSPs from www.ridgerun.com
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_EXAMPLE - identifies the subdirectory in examples
+#   that will be used in the build
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+#   regions of memory to allocate from, this specifies the
+#   number of memory regions that the memory manager must
+#   handle and enables the API mm_addregion(start, end);
+# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+#   time console output
+# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
+#   or TICKS_PER_MSEC=10.  This setting may be defined to
+#   inform NuttX that the processor hardware is providing
+#   system timer interrupts at some interrupt interval other
+#   than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+#   this number of milliseconds;  Round robin scheduling can
+#   be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
+#   scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+#   task name to save in the TCB.  Useful if scheduler
+#   instrumentation is selected.  Set to zero to disable.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+#   Used to initialize the internal time logic.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+#   provides /dev/console.  Enables stdout, stderr, stdin.
+#
+CONFIG_EXAMPLE=ostest
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_MM_REGIONS=1
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=0
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2007
+CONFIG_START_MONTH=2
+CONFIG_START_DAY=21
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=n
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=y
+CONFIG_DISABLE_POSIX_TIMERS=y
+CONFIG_DISABLE_PTHREAD=y
+CONFIG_DISABLE_SIGNALS=y
+CONFIG_DISABLE_MQUEUE=y
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_ENVIRON=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+#   little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=y
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve sysem performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_BZERO=n
+CONFIG_ARCH_KMALLOC=n
+CONFIG_ARCH_KZMALLOC=n
+CONFIG_ARCH_KFREE=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+#   actived tasks.  This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+#   of parameters that a task may receive (i.e., maxmum value
+#   of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+#   specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+#   descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+#   can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+#   structures.  The system manages a pool of preallocated
+#   message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+#   a fixed payload size given by this settin (does not include
+#   other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+#   can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+#   structures.  The system manages a pool of preallocated
+#   watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+#   timer structures.  The system manages a pool of preallocated
+#   timer structures to minimize dynamic allocations.  Set to
+#   zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=8
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=0
+CONFIG_NFILE_DESCRIPTORS=0
+CONFIG_NFILE_STREAMS=0
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=0
+CONFIG_NUNGET_CHARS=0
+CONFIG_PREALLOC_MQ_MSGS=0
+CONFIG_MQ_MAXMSGSIZE=0
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=0
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_LLH_LEN - The link level header length
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+CONFIG_NET=n
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=n
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_LLH_LEN=14
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# Settings for examples/nsh
+CONFIG_EXAMPLES_NSH_TELNET=n
+CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
+CONFIG_EXAMPLES_NSH_CMD_SIZE=40
+CONFIG_EXAMPLES_NSH_STACKSIZE=4096
+CONFIG_EXAMPLES_NSH_DHCPC=n
+CONFIG_EXAMPLES_NSH_NOMAC=n
+CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_FROM_FLASH - Some configurations support XIP
+#   operation from FLASH.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+#   all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer
+# CONFIG_PROC_STACK_SIZE - The size of the initial stack
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_FROM_FLASH=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_PROC_STACK_SIZE=1024
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=1024
+CONFIG_HEAP_SIZE=
+CONFIG_HEAP_BASE=
diff --git a/nuttx/configs/z16f2800100zcog/ostest/ostest.linkcmd b/nuttx/configs/z16f2800100zcog/ostest/ostest.linkcmd
new file mode 100755
index 000000000..c093121e6
--- /dev/null
+++ b/nuttx/configs/z16f2800100zcog/ostest/ostest.linkcmd
@@ -0,0 +1,91 @@
+/****************************************************************************

+ * up_leds.c

+ *

+ *   Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.

+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions

+ * are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright

+ *    notice, this list of conditions and the following disclaimer.

+ * 2. Redistributions in binary form must reproduce the above copyright

+ *    notice, this list of conditions and the following disclaimer in

+ *    the documentation and/or other materials provided with the

+ *    distribution.

+ * 3. Neither the name NuttX nor the names of its contributors may be

+ *    used to endorse or promote products derived from this software

+ *    without specific prior written permission.

+ *

+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ ****************************************************************************/

+

+ -FORMAT=OMF695,INTEL32

+-map -maxhexlen=64 -quiet -sort NAME=ascending -unresolved=fatal

+-warnoverlap -NOxref -warn -debug -NOigcase

+

+RANGE ROM    $000000 : $007FFF

+RANGE RAM    $FFB000 : $FFBFFF

+RANGE IODATA $FFC000 : $FFFFFF

+RANGE EROM   $008000 : $01FFFF

+RANGE ERAM   $800000 : $87FFFF

+

+CHANGE NEAR_TEXT=NEAR_DATA

+CHANGE FAR_TEXT=FAR_DATA

+

+ORDER FAR_BSS,  FAR_DATA

+ORDER NEAR_BSS, NEAR_DATA

+COPY  NEAR_DATA EROM

+COPY  FAR_DATA  EROM

+

+define _0_exit             = 0

+define _low_near_romdata   = copy base of NEAR_DATA

+define _low_neardata       = base of NEAR_DATA

+define _len_neardata       = length of NEAR_DATA

+define _low_far_romdata    = copy base of FAR_DATA

+define _low_fardata        = base of FAR_DATA

+define _len_fardata        = length of FAR_DATA

+define _low_nearbss        = base of NEAR_BSS

+define _len_nearbss        = length of NEAR_BSS

+define _low_farbss         = base of FAR_BSS

+define _len_farbss         = length of FAR_BSS

+define _near_heaptop       = highaddr of RAM

+define _far_heaptop        = highaddr of ERAM

+define _far_stack          = highaddr of ERAM

+define _near_stack         = highaddr of RAM

+define _near_heapbot       = top of RAM

+define _far_heapbot        = top of ERAM

+define _SYS_CLK_SRC        = 2

+define _SYS_CLK_FREQ       = 20000000

+

+define __EXTCT_INIT_PARAM  = $80

+

+define __EXTCS0_INIT_PARAM = $8012

+define __EXTCS1_INIT_PARAM = $8001

+define __EXTCS2_INIT_PARAM = $0000

+define __EXTCS3_INIT_PARAM = $0000

+define __EXTCS4_INIT_PARAM = $0000

+define __EXTCS5_INIT_PARAM = $0000

+define __PFAF_INIT_PARAM   = $ff

+define __PGAF_INIT_PARAM   = $ff

+define __PDAF_INIT_PARAM   = $ff00

+define __PAAF_INIT_PARAM   = $0000

+define __PCAF_INIT_PARAM   = $0000

+define __PHAF_INIT_PARAM   = $0300

+define __PKAF_INIT_PARAM   = $0f

+

+/* arch/z16/src/Makefile will append target, object and library paths below */

+

diff --git a/nuttx/configs/z16f2800100zcog/ostest/setenv.sh b/nuttx/configs/z16f2800100zcog/ostest/setenv.sh
new file mode 100755
index 000000000..4a9bf1d3b
--- /dev/null
+++ b/nuttx/configs/z16f2800100zcog/ostest/setenv.sh
@@ -0,0 +1,51 @@
+#!/bin/sh
+# z16f2800100zcog/setenv.sh
+#
+#   Copyright (C) 2008 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# Check how we were executed
+#
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+#
+# The ZDS-II toolchain lies outside of the Cygwin "sandbox" and
+# attempts to set the PATH variable do not have the desired effect.
+# Instead, alias are provided for all of the ZDS-II command line tools.
+# Version 4.11.0 installed in the default location is assumed here.
+#
+ZDSBINDIR="C:/Program\ Files/ZiLOG/ZDSII_ZNEO_4.11.0/bin"
+alias zneoasm="${ZDSBINDIR}/zneoasm.exe"
+alias zneocc="${ZDSBINDIR}/zneocc.exe"
+alias zneolib="${ZDSBINDIR}/zneolib.exe"
+alias zneolink="${ZDSBINDIR}/zneolink.exe"
\ No newline at end of file