diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2011-10-08 00:37:18 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2011-10-08 00:37:18 +0000 |
commit | c87ac73912d8d1dc36944c52526f13d24301cd7a (patch) | |
tree | 3ac469cc8242aa9eabf5d99f8fafeee25e167f34 /nuttx/configs | |
parent | 77fac8557262940319c3fa3bc473866d4bb90450 (diff) | |
download | px4-nuttx-c87ac73912d8d1dc36944c52526f13d24301cd7a.tar.gz px4-nuttx-c87ac73912d8d1dc36944c52526f13d24301cd7a.tar.bz2 px4-nuttx-c87ac73912d8d1dc36944c52526f13d24301cd7a.zip |
SAM3U: Add logic to bypass automated control of SPI chip selects
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4032 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/configs')
-rw-r--r-- | nuttx/configs/sam3u-ek/src/sam3uek_internal.h | 12 | ||||
-rw-r--r-- | nuttx/configs/sam3u-ek/src/up_lcd.c | 6 | ||||
-rw-r--r-- | nuttx/configs/sam3u-ek/src/up_spi.c | 104 |
3 files changed, 107 insertions, 15 deletions
diff --git a/nuttx/configs/sam3u-ek/src/sam3uek_internal.h b/nuttx/configs/sam3u-ek/src/sam3uek_internal.h index 1aa66d517..5b5138960 100644 --- a/nuttx/configs/sam3u-ek/src/sam3uek_internal.h +++ b/nuttx/configs/sam3u-ek/src/sam3uek_internal.h @@ -164,9 +164,17 @@ /* SPI Chip Selects */ -/* Chip select pin connected to the touchscreen controller and to ZigBee module connector. */ +/* Chip select pin connected to the touchscreen controller and to the ZigBee module + * connector. Notice that the touchscreen chip select is implemented as a GPIO + * OUTPUT that must be controlled by board-specific. This is because the ADS7843E + * driver must be able to sample the device BUSY GPIO input between SPI transfers. + * However, the AD7843E will tri-state the BUSY input whenever the chip select is + * de-asserted. So the only option is to control the chip select manually and hold + * it low throughout the SPI transfer. + */ -#define GPIO_TSC_NPCS2 GPIO_SPI0_NPCS2_3 +#define GPIO_TSC_NPCS2 (GPIO_OUTPUT|GPIO_CFG_PULLUP|GPIO_OUTPUT_SET|\ + GPIO_PORT_PIOC|GPIO_PIN14) /************************************************************************************ * Public Types diff --git a/nuttx/configs/sam3u-ek/src/up_lcd.c b/nuttx/configs/sam3u-ek/src/up_lcd.c index 2de563f9b..22cbeca88 100644 --- a/nuttx/configs/sam3u-ek/src/up_lcd.c +++ b/nuttx/configs/sam3u-ek/src/up_lcd.c @@ -798,9 +798,9 @@ static int sam3u_setpower(struct lcd_dev_s *dev, int power) sam3u_gpiowrite(GPIO_LCD_BKL, false); sam3u_gpiowrite(GPIO_LCD_BKL, false); sam3u_gpiowrite(GPIO_LCD_BKL, false); - sam3u_gpiowrite(GPIO_LCD_BKL, true);; - sam3u_gpiowrite(GPIO_LCD_BKL, true);; - sam3u_gpiowrite(GPIO_LCD_BKL, true);; + sam3u_gpiowrite(GPIO_LCD_BKL, true); + sam3u_gpiowrite(GPIO_LCD_BKL, true); + sam3u_gpiowrite(GPIO_LCD_BKL, true); } /* This delay seems to be required... perhaps because of the big current jump? */ diff --git a/nuttx/configs/sam3u-ek/src/up_spi.c b/nuttx/configs/sam3u-ek/src/up_spi.c index 515dab2e7..8fed3c48f 100644 --- a/nuttx/configs/sam3u-ek/src/up_spi.c +++ b/nuttx/configs/sam3u-ek/src/up_spi.c @@ -107,20 +107,29 @@ void weak_function sam3u_spiinitialize(void) } /**************************************************************************** - * Name: sam3u_spiselect, sam3u_spistatus, and sam3u_spicmddata + * Name: sam3u_spicsnumber, sam3u_spiselect, sam3u_spistatus, and + * sam3u_spicmddata * * Description: * These external functions must be provided by board-specific logic. They - * are implementations of the select, status, and cmddata methods of the SPI - * interface defined by struct spi_ops_s (see include/nuttx/spi.h). All - * other methods including up_spiinitialize()) are provided by common SAM3U - * logic. To use this common SPI logic on your board: + * include: + * + * o sam3u_spicsnumbe and sam3u_spiselect which are helper functions to + * manage the board-specific aspects of the unique SAM3U chip select + * architecture. + * o sam3u_spistatus and sam3u_spicmddata: Implementations of the status + * and cmddata methods of the SPI interface defined by struct spi_ops_ + * (see include/nuttx/spi.h). All other methods including + * up_spiinitialize()) are provided by common SAM3U logic. + * + * To use this common SPI logic on your board: * * 1. Provide logic in sam3u_boardinitialize() to configure SPI chip select * pins. - * 2. Provide sam3u_spiselect() and sam3u_spistatus() functions in your - * board-specific logic. These functions will perform chip selection - * and status operations using GPIOs in the way your board is configured. + * 2. Provide sam3u_spicsnumber(), sam3u_spiselect() and sam3u_spistatus() + * functions in your board-specific logic. These functions will perform + * chip selection and status operations using GPIOs in the way your board + * is configured. * 2. If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, provide * sam3u_spicmddata() functions in your board-specific logic. This * function will perform cmd/data selection operations using GPIOs in @@ -134,8 +143,26 @@ void weak_function sam3u_spiinitialize(void) * ****************************************************************************/ +/**************************************************************************** + * Name: sam3u_spicsnumber + * + * Description: + * The SAM3U has 4 CS registers for controlling device features. This + * function must be provided by board-specific code. Given a logical device + * ID, this function returns a number from 0 to 3 that identifies one of + * these SAM3U CS resources. + * + * Input Parameters: + * devid - Identifies the (logical) device + * + * Returned Values: + * On success, a CS number from 0 to 3 is returned; A negated errno may + * be returned on a failure. + * + ****************************************************************************/ + #ifdef CONFIG_SAM3U_SPI -int sam3u_spiselect(enum spi_dev_e devid) +int sam3u_spicsnumber(enum spi_dev_e devid) { int cs = -EINVAL; @@ -144,7 +171,7 @@ int sam3u_spiselect(enum spi_dev_e devid) { /* Assert the CS pin to the OLED display */ - cs = 2; + cs = 2; } #endif @@ -152,6 +179,63 @@ int sam3u_spiselect(enum spi_dev_e devid) return cs; } +/**************************************************************************** + * Name: sam3u_spiselect + * + * Description: + * PIO chip select pins may be programmed by the board specific logic in + * one of two different ways. First, the pins may be programmed as SPI + * peripherals. In that case, the pins are completely controlled by the + * SPI driver. This method still needs to be provided, but it may be only + * a stub. + * + * An alternative way to program the PIO chip select pins is as a normal + * GPIO output. In that case, the automatic control of the CS pins is + * bypassed and this function must provide control of the chip select. + * NOTE: In this case, the GPIO output pin does *not* have to be the + * same as the NPCS pin normal associated with the chip select number. + * + * Input Parameters: + * devid - Identifies the (logical) device + * selected - TRUE:Select the device, FALSE:De-select the device + * + * Returned Values: + * None + * + ****************************************************************************/ + +void sam3u_spiselect(enum spi_dev_e devid, bool selected) +{ + /* The touchscreen chip select is implemented as a GPIO OUTPUT that must + * be controlled by this function. This is because the ADS7843E driver + * must be able to sample the device BUSY GPIO input between SPI transfers. + * However, the AD7843E will tri-state the BUSY input whenever the chip + * select is de-asserted. So the only option is to control the chip select + * manually and hold it low throughout the SPI transfer. + */ + +#if defined(CONFIG_INPUT) && defined(CONFIG_INPUT_ADS7843E) + if (devid == SPIDEV_TOUCHSCREEN) + { + sam3u_gpiowrite(GPIO_TSC_NPCS2, !selected); + } +#endif +} + +/**************************************************************************** + * Name: sam3u_spistatus + * + * Description: + * Return status information associated with the SPI device. + * + * Input Parameters: + * devid - Identifies the (logical) device + * + * Returned Values: + * Bit-encoded SPI status (see include/nuttx/spi.h. + * + ****************************************************************************/ + uint8_t sam3u_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) { return 0; |