diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2011-10-03 16:02:22 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2011-10-03 16:02:22 +0000 |
commit | f6f82c4f12f9333ffd52e0e2ed07ac267d14a5d4 (patch) | |
tree | f572cca391ad2aeb70049d88e11dc1040d5261cf /nuttx/drivers/input | |
parent | ad07b3a95eff6c444e072271cd9c9cb2adf6971f (diff) | |
download | px4-nuttx-f6f82c4f12f9333ffd52e0e2ed07ac267d14a5d4.tar.gz px4-nuttx-f6f82c4f12f9333ffd52e0e2ed07ac267d14a5d4.tar.bz2 px4-nuttx-f6f82c4f12f9333ffd52e0e2ed07ac267d14a5d4.zip |
Add hooks for the ADS7843E touchscreen controller
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4013 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/drivers/input')
-rwxr-xr-x | nuttx/drivers/input/Make.defs | 6 | ||||
-rw-r--r-- | nuttx/drivers/input/ads7843e.c | 1037 | ||||
-rw-r--r-- | nuttx/drivers/input/ads7843e.h | 71 | ||||
-rw-r--r-- | nuttx/drivers/input/tsc2007.c | 3 | ||||
-rw-r--r-- | nuttx/drivers/input/tsc2007.h | 2 |
5 files changed, 1115 insertions, 4 deletions
diff --git a/nuttx/drivers/input/Make.defs b/nuttx/drivers/input/Make.defs index e4758ed84..e32dc4549 100755 --- a/nuttx/drivers/input/Make.defs +++ b/nuttx/drivers/input/Make.defs @@ -37,12 +37,16 @@ ifeq ($(CONFIG_INPUT),y) -# Include the TI TSC2007 drivers +# Include the selected touchscreen drivers ifeq ($(CONFIG_INPUT_TSC2007),y) CSRCS += tsc2007.c endif +ifeq ($(CONFIG_INPUT_ADS7843E),y) + CSRCS += ads7843e.c +endif + # Include input device driver build support DEPPATH += --dep-path input diff --git a/nuttx/drivers/input/ads7843e.c b/nuttx/drivers/input/ads7843e.c new file mode 100644 index 000000000..d03a64b44 --- /dev/null +++ b/nuttx/drivers/input/ads7843e.c @@ -0,0 +1,1037 @@ +/**************************************************************************** + * drivers/input/ads7843e.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * References: + * "Touch Screen Controller, ADS7843," Burr-Brown Products from Texas + * Instruments, SBAS090B, September 2000, Revised May 2002" + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <sys/types.h> + +#include <stdbool.h> +#include <stdio.h> +#include <unistd.h> +#include <string.h> +#include <fcntl.h> +#include <semaphore.h> +#include <poll.h> +#include <errno.h> +#include <assert.h> +#include <debug.h> + +#include <nuttx/kmalloc.h> +#include <nuttx/arch.h> +#include <nuttx/fs.h> +#include <nuttx/spi.h> +#include <nuttx/wqueue.h> + +#include <nuttx/input/touchscreen.h> +#include <nuttx/input/ads7843e.h> + +#include "ads7843e.h" + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ +/* Configuration ************************************************************/ +/* Reference counting is partially implemented, but not needed in the + * current design. + */ + +#undef CONFIG_ADS7843E_REFCNT + +/* Driver support ***********************************************************/ +/* This format is used to construct the /dev/input[n] device driver path. It + * defined here so that it will be used consistently in all places. + */ + +#define DEV_FORMAT "/dev/input%d" +#define DEV_NAMELEN 16 + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +/* This describes the state of one contact */ + +enum ads7843e_contact_3 +{ + CONTACT_NONE = 0, /* No contact */ + CONTACT_DOWN, /* First contact */ + CONTACT_MOVE, /* Same contact, possibly different position */ + CONTACT_UP, /* Contact lost */ +}; + +/* This structure describes the results of one ADS7843E sample */ + +struct ads7843e_sample_s +{ + uint8_t id; /* Sampled touch point ID */ + uint8_t contact; /* Contact state (see enum ads7843e_contact_e) */ + uint16_t x; /* Measured X position */ + uint16_t y; /* Measured Y position */ +#warning "Missing other measurement data" /* Like size and pressure */ +}; + +/* This structure describes the state of one ADS7843E driver instance */ + +struct ads7843e_dev_s +{ +#ifdef CONFIG_ADS7843E_MULTIPLE + FAR struct ads7843e_dev_s *flink; /* Supports a singly linked list of drivers */ +#endif +#ifdef CONFIG_ADS7843E_REFCNT + uint8_t crefs; /* Number of times the device has been opened */ +#endif + uint8_t nwaiters; /* Number of threads waiting for ADS7843E data */ + uint8_t id; /* Current touch point ID */ + volatile bool penchange; /* An unreported event is buffered */ + sem_t devsem; /* Manages exclusive access to this structure */ + sem_t waitsem; /* Used to wait for the availability of data */ + + FAR struct ads7843e_config_s *config; /* Board configuration data */ + FAR struct spi_dev_s *spi; /* Saved SPI driver instance */ + struct work_s work; /* Supports the interrupt handling "bottom half" */ + struct ads7843e_sample_s sample; /* Last sampled touch point data */ + + /* The following is a list if poll structures of threads waiting for + * driver events. The 'struct pollfd' reference for each open is also + * retained in the f_priv field of the 'struct file'. + */ + +#ifndef CONFIG_DISABLE_POLL + struct pollfd *fds[CONFIG_ADS7843E_NPOLLWAITERS]; +#endif +}; + +/**************************************************************************** + * Private Function Prototypes + ****************************************************************************/ + +static void ads7843e_notify(FAR struct ads7843e_dev_s *priv); +static int ads7843e_sample(FAR struct ads7843e_dev_s *priv, + FAR struct ads7843e_sample_s *sample); +static int ads7843e_waitsample(FAR struct ads7843e_dev_s *priv, + FAR struct ads7843e_sample_s *sample); +static int ads7843e_transfer(FAR struct ads7843e_dev_s *priv, uint8_t cmd); +static void ads7843e_worker(FAR void *arg); +static int ads7843e_interrupt(int irq, FAR void *context); + +/* Character driver methods */ + +static int ads7843e_open(FAR struct file *filep); +static int ads7843e_close(FAR struct file *filep); +static ssize_t ads7843e_read(FAR struct file *filep, FAR char *buffer, size_t len); +static int ads7843e_ioctl(FAR struct file *filep, int cmd, unsigned long arg); +#ifndef CONFIG_DISABLE_POLL +static int ads7843e_poll(FAR struct file *filep, struct pollfd *fds, bool setup); +#endif + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/* This the the vtable that supports the character driver interface */ + +static const struct file_operations ads7843e_fops = +{ + ads7843e_open, /* open */ + ads7843e_close, /* close */ + ads7843e_read, /* read */ + 0, /* write */ + 0, /* seek */ + ads7843e_ioctl /* ioctl */ +#ifndef CONFIG_DISABLE_POLL + , ads7843e_poll /* poll */ +#endif +}; + +/* If only a single ADS7843E device is supported, then the driver state + * structure may as well be pre-allocated. + */ + +#ifndef CONFIG_ADS7843E_MULTIPLE +static struct ads7843e_dev_s g_ads7843e; + +/* Otherwise, we will need to maintain allocated driver instances in a list */ + +#else +static struct ads7843e_dev_s *g_ads7843elist; +#endif + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: ads7843e_notify + ****************************************************************************/ + +static void ads7843e_notify(FAR struct ads7843e_dev_s *priv) +{ +#ifndef CONFIG_DISABLE_POLL + int i; +#endif + + /* If there are threads waiting for read data, then signal one of them + * that the read data is available. + */ + + if (priv->nwaiters > 0) + { + /* After posting this semaphore, we need to exit because the ADS7843E + * is no longer avaialable. + */ + + sem_post(&priv->waitsem); + } + + /* If there are threads waiting on poll() for ADS7843E data to become availabe, + * then wake them up now. NOTE: we wake up all waiting threads because we + * do not know that they are going to do. If they all try to read the data, + * then some make end up blocking after all. + */ + +#ifndef CONFIG_DISABLE_POLL + for (i = 0; i < CONFIG_ADS7843E_NPOLLWAITERS; i++) + { + struct pollfd *fds = priv->fds[i]; + if (fds) + { + fds->revents |= POLLIN; + ivdbg("Report events: %02x\n", fds->revents); + sem_post(fds->sem); + } + } +#endif +} + +/**************************************************************************** + * Name: ads7843e_sample + ****************************************************************************/ + +static int ads7843e_sample(FAR struct ads7843e_dev_s *priv, + FAR struct ads7843e_sample_s *sample) +{ + irqstate_t flags; + int ret = -EAGAIN; + + /* Interrupts me be disabled when this is called to (1) prevent posting + * of semphores from interrupt handlers, and (2) to prevent sampled data + * from changing until it has been reported. + */ + + flags = irqsave(); + + /* Is there new ADS7843E sample data available? */ + + if (priv->penchange) + { + /* Yes.. the state has changed in some way. Return a copy of the + * sampled data. + */ + + memcpy(sample, &priv->sample, sizeof(struct ads7843e_sample_s )); + + /* Now manage state transitions */ + + if (sample->contact == CONTACT_UP) + { + /* Next.. no contract. Increment the ID so that next contact ID will be unique */ + + priv->sample.contact = CONTACT_NONE; + priv->id++; + } + else if (sample->contact == CONTACT_DOWN) + { + /* First report -- next report will be a movement */ + + priv->sample.contact = CONTACT_MOVE; + } + + priv->penchange = false; + ret = OK; + } + + irqrestore(flags); + return ret; +} + +/**************************************************************************** + * Name: ads7843e_waitsample + ****************************************************************************/ + +static int ads7843e_waitsample(FAR struct ads7843e_dev_s *priv, + FAR struct ads7843e_sample_s *sample) +{ + irqstate_t flags; + int ret; + + /* Interrupts me be disabled when this is called to (1) prevent posting + * of semphores from interrupt handlers, and (2) to prevent sampled data + * from changing until it has been reported. + * + * In addition, we will also disable pre-emption to prevent other threads + * from getting control while we muck with the semaphores. + */ + + sched_lock(); + flags = irqsave(); + + /* Now release the semaphore that manages mutually exclusive access to + * the device structure. This may cause other tasks to become ready to + * run, but they cannot run yet because pre-emption is disabled. + */ + + sem_post(&priv->devsem); + + /* Try to get the a sample... if we cannot, then wait on the semaphore + * that is posted when new sample data is availble. + */ + + while (ads7843e_sample(priv, sample) < 0) + { + /* Wait for a change in the ADS7843E state */ + + priv->nwaiters++; + ret = sem_wait(&priv->waitsem); + priv->nwaiters--; + + if (ret < 0) + { + /* If we are awakened by a signal, then we need to return + * the failure now. + */ + + DEBUGASSERT(errno == EINTR); + ret = -EINTR; + goto errout; + } + } + + /* Re-acquire the the semaphore that manages mutually exclusive access to + * the device structure. We may have to wait here. But we have our sample. + * Interrupts and pre-emption will be re-enabled while we wait. + */ + + ret = sem_wait(&priv->devsem); + +errout: + /* Then re-enable interrupts. We might get interrupt here and there + * could be a new sample. But no new threads will run because we still + * have pre-emption disabled. + */ + + irqrestore(flags); + + /* Restore pre-emption. We might get suspended here but that is okay + * because we already have our sample. Note: this means that if there + * were two threads reading from the ADS7843E for some reason, the data + * might be read out of order. + */ + + sched_unlock(); + return ret; +} + +/**************************************************************************** + * Name: ads7843e_transfer + ****************************************************************************/ + +static int ads7843e_transfer(FAR struct ads7843e_dev_s *priv, uint8_t cmd) +{ + int ret = 0; +#warning "Missing logic" + ivdbg("data: 0x%04x\n", ret); + return ret; +} + +/**************************************************************************** + * Name: ads7843e_worker + ****************************************************************************/ + +static void ads7843e_worker(FAR void *arg) +{ + FAR struct ads7843e_dev_s *priv = (FAR struct ads7843e_dev_s *)arg; + FAR struct ads7843e_config_s *config; /* Convenience pointer */ + bool pendown; /* true: pend is down */ + uint16_t x; /* X position */ + uint16_t y; /* Y position */ +#warning "Missing other measurement data" /* Like size and pressure */ + + ASSERT(priv != NULL); + + /* Get a pointer the callbacks for convenience (and so the code is not so + * ugly). + */ + + config = priv->config; + DEBUGASSERT(config != NULL); + + /* Check for pen up or down by reading the PENIRQ GPIO. */ + + pendown = config->pendown(config); + + /* Handle the change from pen down to pen up */ + + if (!pendown) + { + /* Ignore the interrupt if the pen was already down (CONTACT_NONE == pen up and + * already reported. CONTACT_UP == pen up, but not reported) + */ + + if (priv->sample.contact == CONTACT_NONE) + { + goto errout; + } + } + else + { + /* Handle all pen down events. First, sample positional values. */ + +#warning "Missing logic" + + /* Save the measurements */ + + priv->sample.x = x; + priv->sample.y = y; +#warning "Missing other measurement data" /* Like size and pressure */ + } + + /* Note the availability of new measurements */ + + if (pendown) + { + /* If this is the first (acknowledged) pend down report, then report + * this as the first contact. If contact == CONTACT_DOWN, it will be + * set to set to CONTACT_MOVE after the contact is first sampled. + */ + + if (priv->sample.contact != CONTACT_MOVE) + { + /* First contact */ + + priv->sample.contact = CONTACT_DOWN; + } + } + else /* if (priv->sample.contact != CONTACT_NONE) */ + { + /* The pen is up. NOTE: We know from a previous test, that this is a + * loss of contact condition. This will be changed to CONTACT_NONE + * after the loss of contact is sampled. + */ + + priv->sample.contact = CONTACT_UP; + } + + /* Indicate the availability of new sample data for this ID */ + + priv->sample.id = priv->id; + priv->penchange = true; + + /* Notify any waiters that nes ADS7843E data is available */ + + ads7843e_notify(priv); + + /* Exit, re-enabling ADS7843E interrupts */ + +errout: + config->enable(config, true); +} + +/**************************************************************************** + * Name: ads7843e_interrupt + ****************************************************************************/ + +static int ads7843e_interrupt(int irq, FAR void *context) +{ + FAR struct ads7843e_dev_s *priv; + FAR struct ads7843e_config_s *config; + int ret; + + /* Which ADS7843E device caused the interrupt? */ + +#ifndef CONFIG_ADS7843E_MULTIPLE + priv = &g_ads7843e; +#else + for (priv = g_ads7843elist; + priv && priv->configs->irq != irq; + priv = priv->flink); + + ASSERT(priv != NULL); +#endif + + /* Get a pointer the callbacks for convenience (and so the code is not so + * ugly). + */ + + config = priv->config; + DEBUGASSERT(config != NULL); + + /* Disable further interrupts */ + + config->enable(config, false); + + /* Transfer processing to the worker thread. Since ADS7843E interrupts are + * disabled while the work is pending, no special action should be required + * to protected the work queue. + */ + + DEBUGASSERT(priv->work.worker == NULL); + ret = work_queue(&priv->work, ads7843e_worker, priv, 0); + if (ret != 0) + { + illdbg("Failed to queue work: %d\n", ret); + } + + /* Clear any pending interrupts and return success */ + + config->clear(config); + return OK; +} + +/**************************************************************************** + * Name: ads7843e_open + ****************************************************************************/ + +static int ads7843e_open(FAR struct file *filep) +{ +#ifdef CONFIG_ADS7843E_REFCNT + FAR struct inode *inode; + FAR struct ads7843e_dev_s *priv; + uint8_t tmp; + int ret; + + DEBUGASSERT(filep); + inode = filep->f_inode; + + DEBUGASSERT(inode && inode->i_private); + priv = (FAR struct ads7843e_dev_s *)inode->i_private; + + /* Get exclusive access to the driver data structure */ + + ret = sem_wait(&priv->devsem); + if (ret < 0) + { + /* This should only happen if the wait was canceled by an signal */ + + DEBUGASSERT(errno == EINTR); + return -EINTR; + } + + /* Increment the reference count */ + + tmp = priv->crefs + 1; + if (tmp == 0) + { + /* More than 255 opens; uint8_t overflows to zero */ + + ret = -EMFILE; + goto errout_with_sem; + } + + /* When the reference increments to 1, this is the first open event + * on the driver.. and an opportunity to do any one-time initialization. + */ + + /* Save the new open count on success */ + + priv->crefs = tmp; + +errout_with_sem: + sem_post(&priv->devsem); + return ret; +#else + return OK; +#endif +} + +/**************************************************************************** + * Name: ads7843e_close + ****************************************************************************/ + +static int ads7843e_close(FAR struct file *filep) +{ +#ifdef CONFIG_ADS7843E_REFCNT + FAR struct inode *inode; + FAR struct ads7843e_dev_s *priv; + int ret; + + DEBUGASSERT(filep); + inode = filep->f_inode; + + DEBUGASSERT(inode && inode->i_private); + priv = (FAR struct ads7843e_dev_s *)inode->i_private; + + /* Get exclusive access to the driver data structure */ + + ret = sem_wait(&priv->devsem); + if (ret < 0) + { + /* This should only happen if the wait was canceled by an signal */ + + DEBUGASSERT(errno == EINTR); + return -EINTR; + } + + /* Decrement the reference count unless it would decrement a negative + * value. When the count decrements to zero, there are no further + * open references to the driver. + */ + + if (priv->crefs >= 1) + { + priv->crefs--; + } + + sem_post(&priv->devsem); +#endif + return OK; +} + +/**************************************************************************** + * Name: ads7843e_read + ****************************************************************************/ + +static ssize_t ads7843e_read(FAR struct file *filep, FAR char *buffer, size_t len) +{ + FAR struct inode *inode; + FAR struct ads7843e_dev_s *priv; + FAR struct touch_sample_s *report; + struct ads7843e_sample_s sample; + int ret; + + DEBUGASSERT(filep); + inode = filep->f_inode; + + DEBUGASSERT(inode && inode->i_private); + priv = (FAR struct ads7843e_dev_s *)inode->i_private; + + /* Verify that the caller has provided a buffer large enough to receive + * the touch data. + */ + + if (len < SIZEOF_TOUCH_SAMPLE_S(1)) + { + /* We could provide logic to break up a touch report into segments and + * handle smaller reads... but why? + */ + + return -ENOSYS; + } + + /* Get exclusive access to the driver data structure */ + + ret = sem_wait(&priv->devsem); + if (ret < 0) + { + /* This should only happen if the wait was canceled by an signal */ + + DEBUGASSERT(errno == EINTR); + return -EINTR; + } + + /* Try to read sample data. */ + + ret = ads7843e_sample(priv, &sample); + if (ret < 0) + { + /* Sample data is not available now. We would ave to wait to get + * receive sample data. If the user has specified the O_NONBLOCK + * option, then just return an error. + */ + + if (filep->f_oflags & O_NONBLOCK) + { + ret = -EAGAIN; + goto errout; + } + + /* Wait for sample data */ + + ret = ads7843e_waitsample(priv, &sample); + if (ret < 0) + { + /* We might have been awakened by a signal */ + + goto errout; + } + } + + /* In any event, we now have sampled ADS7843E data that we can report + * to the caller. + */ + + report = (FAR struct touch_sample_s *)buffer; + memset(report, 0, SIZEOF_TOUCH_SAMPLE_S(1)); + report->npoints = 1; + report->point[0].id = priv->id; + report->point[0].x = sample.x; + report->point[0].y = sample.y; + report->point[0].pressure = 42; /* ???????????????????? */ + + /* Report the appropriate flags */ + + if (sample.contact == CONTACT_UP) + { + /* Pen is now up */ + + report->point[0].flags = TOUCH_UP | TOUCH_ID_VALID; + } + else if (sample.contact == CONTACT_DOWN) + { + /* First contact */ + + report->point[0].flags = TOUCH_DOWN | TOUCH_ID_VALID | TOUCH_POS_VALID | TOUCH_PRESSURE_VALID; + } + else /* if (sample->contact == CONTACT_MOVE) */ + { + /* Movement of the same contact */ + + report->point[0].flags = TOUCH_MOVE | TOUCH_ID_VALID | TOUCH_POS_VALID | TOUCH_PRESSURE_VALID; + } + + ret = SIZEOF_TOUCH_SAMPLE_S(1); + +errout: + sem_post(&priv->devsem); + return ret; +} + +/**************************************************************************** + * Name:ads7843e_ioctl + ****************************************************************************/ + +static int ads7843e_ioctl(FAR struct file *filep, int cmd, unsigned long arg) +{ + FAR struct inode *inode; + FAR struct ads7843e_dev_s *priv; + int ret; + + ivdbg("cmd: %d arg: %ld\n", cmd, arg); + DEBUGASSERT(filep); + inode = filep->f_inode; + + DEBUGASSERT(inode && inode->i_private); + priv = (FAR struct ads7843e_dev_s *)inode->i_private; + + /* Get exclusive access to the driver data structure */ + + ret = sem_wait(&priv->devsem); + if (ret < 0) + { + /* This should only happen if the wait was canceled by an signal */ + + DEBUGASSERT(errno == EINTR); + return -EINTR; + } + + /* Process the IOCTL by command */ + + switch (cmd) + { + case TSIOC_SETCALIB: /* arg: Pointer to int calibration value */ + { + FAR int *ptr = (FAR int *)((uintptr_t)arg); + DEBUGASSERT(priv->config != NULL && ptr != NULL); + priv->config->calib = *ptr; + } + break; + + case TSIOC_GETCALIB: /* arg: Pointer to int calibration value */ + { + FAR int *ptr = (FAR int *)((uintptr_t)arg); + DEBUGASSERT(priv->config != NULL && ptr != NULL); + *ptr = priv->config->calib; + } + break; + + case TSIOC_SETFREQUENCY: /* arg: Pointer to uint32_t frequency value */ + { + FAR uint32_t *ptr = (FAR uint32_t *)((uintptr_t)arg); + DEBUGASSERT(priv->config != NULL && ptr != NULL); + priv->config->frequency = SPI_SETFREQUENCY(priv->spi, *ptr); + } + break; + + case TSIOC_GETFREQUENCY: /* arg: Pointer to uint32_t frequency value */ + { + FAR uint32_t *ptr = (FAR uint32_t *)((uintptr_t)arg); + DEBUGASSERT(priv->config != NULL && ptr != NULL); + *ptr = priv->config->frequency; + } + break; + + default: + ret = -ENOTTY; + break; + } + + sem_post(&priv->devsem); + return ret; +} + +/**************************************************************************** + * Name: ads7843e_poll + ****************************************************************************/ + +#ifndef CONFIG_DISABLE_POLL +static int ads7843e_poll(FAR struct file *filep, FAR struct pollfd *fds, + bool setup) +{ + FAR struct inode *inode; + FAR struct ads7843e_dev_s *priv; + pollevent_t eventset; + int ndx; + int ret = OK; + int i; + + ivdbg("setup: %d\n", (int)setup); + DEBUGASSERT(filep && fds); + inode = filep->f_inode; + + DEBUGASSERT(inode && inode->i_private); + priv = (FAR struct ads7843e_dev_s *)inode->i_private; + + /* Are we setting up the poll? Or tearing it down? */ + + ret = sem_wait(&priv->devsem); + if (ret < 0) + { + /* This should only happen if the wait was canceled by an signal */ + + DEBUGASSERT(errno == EINTR); + return -EINTR; + } + + if (setup) + { + /* Ignore waits that do not include POLLIN */ + + if ((fds->revents & POLLIN) == 0) + { + ret = -EDEADLK; + goto errout; + } + + /* This is a request to set up the poll. Find an available + * slot for the poll structure reference + */ + + for (i = 0; i < CONFIG_ADS7843E_NPOLLWAITERS; i++) + { + /* Find an available slot */ + + if (!priv->fds[i]) + { + /* Bind the poll structure and this slot */ + + priv->fds[i] = fds; + fds->priv = &priv->fds[i]; + break; + } + } + + if (i >= CONFIG_ADS7843E_NPOLLWAITERS) + { + fds->priv = NULL; + ret = -EBUSY; + goto errout; + } + + /* Should we immediately notify on any of the requested events? */ + + if (priv->penchange) + { + ads7843e_notify(priv); + } + } + else if (fds->priv) + { + /* This is a request to tear down the poll. */ + + struct pollfd **slot = (struct pollfd **)fds->priv; + DEBUGASSERT(slot != NULL); + + /* Remove all memory of the poll setup */ + + *slot = NULL; + fds->priv = NULL; + } + +errout: + sem_post(&priv->devsem); + return ret; +} +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: ads7843e_register + * + * Description: + * Configure the ADS7843E to use the provided SPI device instance. This + * will register the driver as /dev/inputN where N is the minor device + * number + * + * Input Parameters: + * dev - An SPI driver instance + * config - Persistant board configuration data + * minor - The input device minor number + * + * Returned Value: + * Zero is returned on success. Otherwise, a negated errno value is + * returned to indicate the nature of the failure. + * + ****************************************************************************/ + +int ads7843e_register(FAR struct spi_dev_s *dev, + FAR struct ads7843e_config_s *config, int minor) +{ + FAR struct ads7843e_dev_s *priv; + char devname[DEV_NAMELEN]; +#ifdef CONFIG_ADS7843E_MULTIPLE + irqstate_t flags; +#endif + int ret; + + ivdbg("dev: %p minor: %d\n", dev, minor); + + /* Debug-only sanity checks */ + + DEBUGASSERT(dev != NULL && config != NULL && minor >= 0 && minor < 100); + DEBUGASSERT((config->address & 0xfc) == 0x48); + DEBUGASSERT(config->attach != NULL && config->enable != NULL && + config->clear != NULL && config->pendown != NULL); + + /* Create and initialize a ADS7843E device driver instance */ + +#ifndef CONFIG_ADS7843E_MULTIPLE + priv = &g_ads7843e; +#else + priv = (FAR struct ads7843e_dev_s *)kmalloc(sizeof(struct ads7843e_dev_s)); + if (!priv) + { + idbg("kmalloc(%d) failed\n", sizeof(struct ads7843e_dev_s)); + return -ENOMEM; + } +#endif + + /* Initialize the ADS7843E device driver instance */ + + memset(priv, 0, sizeof(struct ads7843e_dev_s)); + priv->spi = dev; /* Save the SPI device handle */ + priv->config = config; /* Save the board configuration */ + sem_init(&priv->devsem, 0, 1); /* Initialize device structure semaphore */ + sem_init(&priv->waitsem, 0, 0); /* Initialize pen event wait semaphore */ + + /* Set the SPI frequency (saving the actual frequency) */ + + config->frequency = SPI_SETFREQUENCY(dev, config->frequency); + + /* Make sure that interrupts are disabled */ + + config->clear(config); + config->enable(config, false); + + /* Attach the interrupt handler */ + + ret = config->attach(config, ads7843e_interrupt); + if (ret < 0) + { + idbg("Failed to attach interrupt\n"); + goto errout_with_priv; + } + + /* Initialize the touchscreen device */ +#warning "Missing logic" + + /* Register the device as an input device */ + + (void)snprintf(devname, DEV_NAMELEN, DEV_FORMAT, minor); + ivdbg("Registering %s\n", devname); + + ret = register_driver(devname, &ads7843e_fops, 0666, priv); + if (ret < 0) + { + idbg("register_driver() failed: %d\n", ret); + goto errout_with_priv; + } + + /* If multiple ADS7843E devices are supported, then we will need to add + * this new instance to a list of device instances so that it can be + * found by the interrupt handler based on the recieved IRQ number. + */ + +#ifdef CONFIG_ADS7843E_MULTIPLE + priv->flink = g_ads7843elist; + g_ads7843elist = priv; + irqrestore(flags); +#endif + + /* Schedule work to perform the initial sampling and to set the data + * availability conditions. + */ + + ret = work_queue(&priv->work, ads7843e_worker, priv, 0); + if (ret != 0) + { + idbg("Failed to queue work: %d\n", ret); + goto errout_with_priv; + } + + /* And return success (?) */ + + return OK; + +errout_with_priv: + sem_destroy(&priv->devsem); +#ifdef CONFIG_ADS7843E_MULTIPLE + kfree(priv); +#endif + return ret; +} diff --git a/nuttx/drivers/input/ads7843e.h b/nuttx/drivers/input/ads7843e.h new file mode 100644 index 000000000..80106c3b8 --- /dev/null +++ b/nuttx/drivers/input/ads7843e.h @@ -0,0 +1,71 @@ +/******************************************************************************************** + * drivers/input/ads7843e.h + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * References: + * "Touch Screen Controller, ADS7843," Burr-Brown Products from Texas + * Instruments, SBAS090B, September 2000, Revised May 2002" + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ********************************************************************************************/ + +#ifndef __DRIVERS_INPUT_ADS7843E_H +#define __DRIVERS_INPUT_ADS7843E_H + +/******************************************************************************************** + * Included Files + ********************************************************************************************/ + +/******************************************************************************************** + * Pre-Processor Definitions + ********************************************************************************************/ + +/******************************************************************************************** + * Public Types + ********************************************************************************************/ + +/******************************************************************************************** + * Public Function Prototypes + ********************************************************************************************/ + +#ifdef __cplusplus +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +#undef EXTERN +#ifdef __cplusplus +} +#endif + +#endif /* __DRIVERS_INPUT_ADS7843E_H */ diff --git a/nuttx/drivers/input/tsc2007.c b/nuttx/drivers/input/tsc2007.c index 25c748823..e6e570d62 100644 --- a/nuttx/drivers/input/tsc2007.c +++ b/nuttx/drivers/input/tsc2007.c @@ -2,7 +2,7 @@ * drivers/input/tsc2007.c * * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * References: * "1.2V to 3.6V, 12-Bit, Nanopower, 4-Wire Micro TOUCH SCREEN CONTROLLER @@ -1187,7 +1187,6 @@ int tsc2007_register(FAR struct i2c_dev_s *dev, */ #ifdef CONFIG_TSC2007_MULTIPLE - priv = irqsave; priv->flink = g_tsc2007list; g_tsc2007list = priv; irqrestore(flags); diff --git a/nuttx/drivers/input/tsc2007.h b/nuttx/drivers/input/tsc2007.h index 067d6ba3b..052ce76d2 100644 --- a/nuttx/drivers/input/tsc2007.h +++ b/nuttx/drivers/input/tsc2007.h @@ -2,7 +2,7 @@ * drivers/input/tsc2007.h * * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * References: * "1.2V to 3.6V, 12-Bit, Nanopower, 4-Wire Micro TOUCH SCREEN CONTROLLER |