summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--nuttx/ChangeLog2
-rw-r--r--nuttx/Documentation/NuttX.html4
-rw-r--r--nuttx/arch/arm/src/lpc214x/chip.h20
-rw-r--r--nuttx/arch/arm/src/lpc214x/lpc214x_head.S12
-rw-r--r--nuttx/configs/mcu123-lpc214x/README.txt3
-rw-r--r--nuttx/configs/mcu123-lpc214x/nsh/ld.script15
-rw-r--r--nuttx/configs/mcu123-lpc214x/src/up_leds.c32
-rw-r--r--nuttx/configs/mcu123-lpc214x/src/up_spi.c22
8 files changed, 89 insertions, 21 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index 5c8bed60a..a97d79c1c 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -714,4 +714,6 @@
for verifying this.
* Began adding support for the MicroMint Eagle100 board. This board has a
Luminary LM3S6918 Cortex-M3.
+ * Add configuration option to enable fast GPIO (vs. legacy, "slow" GPIO) for
+ LPC214x.
diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html
index b71e005dd..4909faec8 100644
--- a/nuttx/Documentation/NuttX.html
+++ b/nuttx/Documentation/NuttX.html
@@ -8,7 +8,7 @@
<tr align="center" bgcolor="#e4e4e4">
<td>
<h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1>
- <p>Last Updated: May 7, 2009</p>
+ <p>Last Updated: May 9, 2009</p>
</td>
</tr>
</table>
@@ -1400,6 +1400,8 @@ nuttx-0.4.6 2009-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
for verifying this.
* Began adding support for the MicroMint Eagle100 board. This board has a
Luminary LM3S6918 Cortex-M3.
+ * Add configuration option to enable fast GPIO (vs. legacy, "slow" GPIO) for
+ LPC214x.
pascal-0.1.3 2009-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
diff --git a/nuttx/arch/arm/src/lpc214x/chip.h b/nuttx/arch/arm/src/lpc214x/chip.h
index 336889f4d..eba3fa52b 100644
--- a/nuttx/arch/arm/src/lpc214x/chip.h
+++ b/nuttx/arch/arm/src/lpc214x/chip.h
@@ -47,6 +47,7 @@
/* Memory Map ***************************************************************************************/
#define LPC214X_FLASH_BASE 0x00000000
+#define LPC214X_FIO_BASE 0x3fffc000
#define LPC214X_ONCHIP_RAM_BASE 0x40000000
#define LPC214X_USBDMA_RAM_BASE 0x7fd00000
#define LPC214X_BOOT_BLOCK 0x7fffd000
@@ -56,7 +57,12 @@
/* Peripheral Registers ****************************************************************************/
-/* Register block base addresses */
+/* FIO Register block base addresses */
+
+#define LPC214X_FIO0_BASE 0x3fffc000 /* Fast I/O 0 base address */
+#define LPC214X_FIO1_BASE 0x3fffc020 /* Fast I/O 1 base address */
+
+/* APB Register block base addresses */
#define LPC214X_WD_BASE 0xe0000000 /* Watchdog base address */
#define LPC214X_TMR0_BASE 0xe0004000 /* Timer 0 base address*/
@@ -79,12 +85,15 @@
#define LPC214X_SCB_BASE 0xe01fc000 /* System Control Block (SBC) base address */
#define LPC214X_MAM_BASE 0xe01fc000 /* Memory Accelerator Module (MAM) base address */
+#define LPC214X_SCS 0xe01fc1a0 /* System Control and Status flags (SCS) */
#define LPC214X_MEMMAP 0xe01fc040 /* Memory Mapping Control */
#define LPC214X_PLL_BASE 0xe01fc080 /* Phase Locked Loop (PLL) base address */
#define LPC214X_PCON_BASE 0xe01fc0c0 /* Power Control (PCON) base address */
#define LPC214X_APBDIV 0xe01fc100 /* APBDIV Address */
#define LPC214X_EXT_BASE 0xe01fc140 /* External Interrupt base address */
+/* AHB Register block base addresses */
+
#define LPC214X_EMC_BASE 0xffe00000 /* External Memory Controller (EMC) base address */
#define LPC214X_VIC_BASE 0xfffff000 /* Vectored Interrupt Controller (VIC) Base */
@@ -169,6 +178,7 @@
#define LPC214X_PINSEL2_OFFSET 0x14 /* Pin function select register 2 */
/* Analog to Digital (AD) Converter registger offsets */
+
#define LPC214X_AD_ADCR_OFFSET 0x00 /* A/D Control Register */
#define LPC214X_AD_ADGDR_OFFSET 0x04 /* A/D Global Data Register (only one common register!) */
#define LPC214X_AD_ADGSR_OFFSET 0x08 /* A/D Global Start Register */
@@ -240,6 +250,14 @@
#define LPC214X_GPIO_DIR_OFFSET 0x08 /* Pin Direction Register */
#define LPC214X_GPIO_CLR_OFFSET 0x0c /* Pin Output Clear Register */
+/* FIO register offsets */
+
+#define LPC214X_FIO_DIR_OFFSET 0x00 /* Fast GPIO Port Direction Register */
+#define LPC214X_FIO_MASK_OFFSET 0x10 /* Fast GPIO Mask Register */
+#define LPC214X_FIO_PIN_OFFSET 0x14 /* Fast GPIO Pin Value Register */
+#define LPC214X_FIO_SET_OFFSET 0x18 /* Fast GPIO Port Output Set Register */
+#define LPC214X_FIO_CLR_OFFSET 0x1c /* Fast GPIO Port Output Clear Register */
+
/* Memory Accelerator Module (MAM) Regiser Offsets */
#define LPC214X_MAM_CR_OFFSET 0x00 /* MAM Control Offset*/
diff --git a/nuttx/arch/arm/src/lpc214x/lpc214x_head.S b/nuttx/arch/arm/src/lpc214x/lpc214x_head.S
index b1fd603f7..58b852e60 100644
--- a/nuttx/arch/arm/src/lpc214x/lpc214x_head.S
+++ b/nuttx/arch/arm/src/lpc214x/lpc214x_head.S
@@ -433,6 +433,14 @@
#endif
.endm
+ .macro configfastport, base, tmp
+#ifdef CONFIG_LPC214x_FIO
+ ldr \base, =LPC214X_SCS
+ mov \tmp, #0x03
+ str \tmp,[\base]
+#endif
+ .endm
+
/*****************************************************************************
* Text
*****************************************************************************/
@@ -534,6 +542,10 @@ __start:
configdac r0, r1
+ /* Configure Fast GPIO Port */
+
+ configfastport r0, r1
+
/* Configure the uart so that we can get debug output as soon
* as possible. Modifies r0, r1, r2, and r14.
*/
diff --git a/nuttx/configs/mcu123-lpc214x/README.txt b/nuttx/configs/mcu123-lpc214x/README.txt
index 9a76c0730..b7d551964 100644
--- a/nuttx/configs/mcu123-lpc214x/README.txt
+++ b/nuttx/configs/mcu123-lpc214x/README.txt
@@ -98,10 +98,13 @@ ARM/LPC214X-specific Configuration Options
LPC2148 specific chip initialization
+ These provide register setup values:
CONFIG_EXTMEM_MODE, CONFIG_RAM_MODE, CONFIG_CODE_BASE, CONFIG_PLL_SETUP,
CONFIG_MAM_SETUP, CONFIG_APBDIV_SETUP, CONFIG_EMC_SETUP, CONFIG_BCFG0_SETUP,
CONFIG_BCFG1_SETUP, CONFIG_BCFG2_SETUP, CONFIG_BCFG3_SETUP, CONFIG_ADC_SETUP
+ CONFIG_LPC214x_FIO - Enable fast GPIO (vs. legacy, "old" GPIO).
+
LPC214X specific device driver settings
CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
diff --git a/nuttx/configs/mcu123-lpc214x/nsh/ld.script b/nuttx/configs/mcu123-lpc214x/nsh/ld.script
index 3020fcc49..849f8492e 100644
--- a/nuttx/configs/mcu123-lpc214x/nsh/ld.script
+++ b/nuttx/configs/mcu123-lpc214x/nsh/ld.script
@@ -33,6 +33,12 @@
*
****************************************************************************/
+MEMORY
+{
+ flash (rx) : ORIGIN = 0, LENGTH = 500K
+ ram (rw) : ORIGIN = 0x40000000, LENGTH = 32K - 32
+}
+
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
@@ -42,7 +48,6 @@ SECTIONS
* 0x00000000 (default MEMMAP mode assumed)
*/
- . = 0x00000000;
.text : {
_stext = ABSOLUTE(.);
*(.text)
@@ -54,7 +59,7 @@ SECTIONS
*(.glue_7t)
*(.got) /* Global offset table */
_etext = ABSOLUTE(.);
- }
+ } > flash
_eronly = ABSOLUTE(.); /* This is where the .data section
* is relocated for execution out
* FLASH */
@@ -64,20 +69,22 @@ SECTIONS
* to _sdata at boot time.
*/
- . = 0x40000000;
.data : {
_sdata = ABSOLUTE(.);
*(.data)
CONSTRUCTORS
_edata = ABSOLUTE(.);
- }
+ } >ram AT>flash
+ . = ALIGN(32 / 8);
.bss : { /* BSS */
_sbss = ABSOLUTE(.);
*(.bss)
*(COMMON)
_ebss = ABSOLUTE(.);
}
+
+ . = ALIGN(32 / 8);
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
diff --git a/nuttx/configs/mcu123-lpc214x/src/up_leds.c b/nuttx/configs/mcu123-lpc214x/src/up_leds.c
index 8c465a055..f259fff61 100644
--- a/nuttx/configs/mcu123-lpc214x/src/up_leds.c
+++ b/nuttx/configs/mcu123-lpc214x/src/up_leds.c
@@ -50,11 +50,25 @@
/* P1.16-P1.23 control LEDS 1-8 */
-#define LEDBIT(led) (0x00010000 << (led))
-#define ALLLEDS (0x00ff0000)
+#define LEDBIT(led) (0x00010000 << (led))
+#define ALLLEDS (0x00ff0000)
-#define putled(v,r) putreg32((v),(LPC214X_GPIO1_BASE+(r)))
-#define CLRLEDS putled(ALLLEDS,LPC214X_GPIO_SET_OFFSET)
+#ifdef CONFIG_LPC214x_FIO
+# define putled(v,r) putreg32((v),(LPC214X_FIO1_BASE+(r)))
+# define CLRLEDS putled(ALLLEDS,LPC214X_FIO_SET_OFFSET)
+
+# define LED_SET_OFFSET LPC214X_FIO_SET_OFFSET
+# define LED_CLR_OFFSET LPC214X_FIO_CLR_OFFSET
+# define LED_DIR_OFFSET LPC214X_FIO_DIR_OFFSET
+
+#else
+# define putled(v,r) putreg32((v),(LPC214X_GPIO1_BASE+(r)))
+# define CLRLEDS putled(ALLLEDS,LPC214X_GPIO_SET_OFFSET)
+
+# define LED_SET_OFFSET LPC214X_GPIO_SET_OFFSET
+# define LED_CLR_OFFSET LPC214X_GPIO_CLR_OFFSET
+# define LED_DIR_OFFSET LPC214X_GPIO_DIR_OFFSET
+#endif
/****************************************************************************
* Private Data
@@ -77,9 +91,9 @@ void up_ledinit(void)
{
/* Initilize GIOs P1.16-P1.23 */
- putled(ALLLEDS,LPC214X_GPIO_DIR_OFFSET);
- putled(ALLLEDS,LPC214X_GPIO_SET_OFFSET);
- putled(LEDBIT(0),LPC214X_GPIO_CLR_OFFSET);
+ putled(ALLLEDS,LED_DIR_OFFSET);
+ putled(ALLLEDS,LED_SET_OFFSET);
+ putled(LEDBIT(0),LED_CLR_OFFSET);
}
/****************************************************************************
@@ -88,7 +102,7 @@ void up_ledinit(void)
void up_ledon(int led)
{
- putled(LEDBIT(led),LPC214X_GPIO_CLR_OFFSET);
+ putled(LEDBIT(led),LED_CLR_OFFSET);
}
/****************************************************************************
@@ -97,6 +111,6 @@ void up_ledon(int led)
void up_ledoff(int led)
{
- putled(LEDBIT(led),LPC214X_GPIO_SET_OFFSET);
+ putled(LEDBIT(led),LED_SET_OFFSET);
}
#endif /* CONFIG_ARCH_LEDS */
diff --git a/nuttx/configs/mcu123-lpc214x/src/up_spi.c b/nuttx/configs/mcu123-lpc214x/src/up_spi.c
index 39e82814f..59818748a 100644
--- a/nuttx/configs/mcu123-lpc214x/src/up_spi.c
+++ b/nuttx/configs/mcu123-lpc214x/src/up_spi.c
@@ -82,6 +82,16 @@
#define LPC214X_CCLKFREQ (LPC214X_FOSC*LPC214X_PLL_M)
#define LPC214X_PCLKFREQ (LPC214X_CCLKFREQ/LPC214X_APB_DIV)
+#ifdef CONFIG_LPC214x_FIO
+# define CS_SET_REGISTER (LPC214X_FIO0_BASE+LPC214X_FIO_SET_OFFSET)
+# define CS_CLR_REGISTER (LPC214X_FIO0_BASE+LPC214X_FIO_CLR_OFFSET)
+# define CS_DIR_REGISTER (LPC214X_FIO0_BASE+LPC214X_FIO_DIR_OFFSET)
+#else
+# define CS_SET_REGISTER (LPC214X_GPIO0_BASE+LPC214X_GPIO_SET_OFFSET)
+# define CS_CLR_REGISTER (LPC214X_GPIO0_BASE+LPC214X_GPIO_CLR_OFFSET)
+# define CS_DIR_REGISTER (LPC214X_GPIO0_BASE+LPC214X_GPIO_DIR_OFFSET)
+#endif
+
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
@@ -143,13 +153,13 @@ static void spi_select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, boolean
{
/* Enable slave select (low enables) */
- putreg32(bit, LPC214X_GPIO0_BASE+LPC214X_GPIO_CLR_OFFSET);
+ putreg32(bit, CS_CLR_REGISTER);
}
else
{
/* Disable slave select (low enables) */
- putreg32(bit, LPC214X_GPIO0_BASE+LPC214X_GPIO_SET_OFFSET);
+ putreg32(bit, CS_SET_REGISTER);
/* Wait for the TX FIFO not full indication */
@@ -425,7 +435,7 @@ FAR struct spi_dev_s *up_spiinitialize(int port)
* PINSEL1 P0.17/CAP1.2/SCK1/MAT1.2 Bits 2-3=10 for SCK1
* PINSEL1 P0.18/CAP1.3/MISO1/MAT1.3 Bits 4-5=10 for MISO1
* PINSEL1 P0.19/MAT1.2/MOSI1/CAP1.2 Bits 6-7=10 for MOSI1
- * PINSEL1 P0.20/MAT1.3/SSEL1/EINT3 Bits 8-9=10 for P0.20 (we'll control it via GPIO)
+ * PINSEL1 P0.20/MAT1.3/SSEL1/EINT3 Bits 8-9=10 for P0.20 (we'll control it via GPIO or FIO)
*/
regval32 = getreg32(LPC214X_PINSEL1);
@@ -438,9 +448,9 @@ FAR struct spi_dev_s *up_spiinitialize(int port)
/* Disable chip select using P0.20 (SSEL1) (low enables) */
regval32 = 1 << 20;
- putreg32(regval32, LPC214X_GPIO0_BASE+LPC214X_GPIO_SET_OFFSET);
- regval32 |= getreg32(LPC214X_GPIO0_BASE+LPC214X_GPIO_DIR_OFFSET);
- putreg32(regval32, LPC214X_GPIO0_BASE+LPC214X_GPIO_DIR_OFFSET);
+ putreg32(regval32, CS_SET_REGISTER);
+ regval32 |= getreg32(CS_DIR_REGISTER);
+ putreg32(regval32, CS_DIR_REGISTER);
/* Enable peripheral clocking to SPI1 */
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-06 05:43:08 +0000