diff options
-rwxr-xr-x | nuttx/configs/stm3210e-eval/include/README.txt | 1 | ||||
-rwxr-xr-x | nuttx/configs/stm3210e-eval/include/board.h | 85 | ||||
-rwxr-xr-x | nuttx/configs/stm3210e-eval/src/Makefile | 86 | ||||
-rwxr-xr-x | nuttx/configs/stm3210e-eval/src/README.txt | 1 | ||||
-rwxr-xr-x | nuttx/configs/stm3210e-eval/src/stm3210e-internal.h | 87 | ||||
-rwxr-xr-x | nuttx/configs/stm3210e-eval/src/up_boot.c | 91 | ||||
-rwxr-xr-x | nuttx/configs/stm3210e-eval/src/up_leds.c | 109 | ||||
-rwxr-xr-x | nuttx/configs/stm3210e-eval/src/up_nsh.c | 140 | ||||
-rwxr-xr-x | nuttx/configs/stm3210e-eval/src/up_spi.c | 142 |
9 files changed, 742 insertions, 0 deletions
diff --git a/nuttx/configs/stm3210e-eval/include/README.txt b/nuttx/configs/stm3210e-eval/include/README.txt new file mode 100755 index 000000000..e4c44b8f6 --- /dev/null +++ b/nuttx/configs/stm3210e-eval/include/README.txt @@ -0,0 +1 @@ +This directory contains header files unique to the STMicro STM3210E-EVAL development board. diff --git a/nuttx/configs/stm3210e-eval/include/board.h b/nuttx/configs/stm3210e-eval/include/board.h new file mode 100755 index 000000000..00ba0115d --- /dev/null +++ b/nuttx/configs/stm3210e-eval/include/board.h @@ -0,0 +1,85 @@ +/************************************************************************************ + * configs/stm3210e-eval/include/board.h + * include/arch/board/board.h + * + * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_BOARD_BOARD_H +#define __ARCH_BOARD_BOARD_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#ifndef __ASSEMBLY__ +# include <sys/types.h> +#endif +#include "stm32_internal.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* Clocking *************************************************************************/ + +/* LED definitions ******************************************************************/ + +#define LED_STARTED 0 +#define LED_HEAPALLOCATE 1 +#define LED_IRQSENABLED 2 +#define LED_STACKCREATED 3 +#define LED_INIRQ 4 +#define LED_SIGNAL 5 +#define LED_ASSERTION 6 +#define LED_PANIC 7 + +/************************************************************************************ + * Public Function Prototypes + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the intitialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +extern void stm32_boardinitialize(void); + +#endif /* __ASSEMBLY__ */ +#endif /* __ARCH_BOARD_BOARD_H */ diff --git a/nuttx/configs/stm3210e-eval/src/Makefile b/nuttx/configs/stm3210e-eval/src/Makefile new file mode 100755 index 000000000..d63a7ee79 --- /dev/null +++ b/nuttx/configs/stm3210e-eval/src/Makefile @@ -0,0 +1,86 @@ +############################################################################ +# configs/stm3210e-eval/src/Makefile +# +# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +CFLAGS += -I$(TOPDIR)/sched + +ASRCS = +AOBJS = $(ASRCS:.S=$(OBJEXT)) +CSRCS = up_boot.c up_leds.c up_spi.c +ifeq ($(CONFIG_EXAMPLES_NSH_ARCHINIT),y) +CSRCS += up_nsh.c +endif +COBJS = $(CSRCS:.c=$(OBJEXT)) + +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) + +ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src +ifeq ($(WINTOOL),y) + CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/cortexm3}" +else + CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/cortexm3 +endif + +all: libboard$(LIBEXT) + +$(AOBJS): %$(OBJEXT): %.S + $(call ASSEMBLE, $<, $@) + +$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +libboard$(LIBEXT): $(OBJS) + @( for obj in $(OBJS) ; do \ + $(call ARCHIVE, $@, $${obj}); \ + done ; ) + +.depend: Makefile $(SRCS) + @$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep + @touch $@ + +depend: .depend + +clean: + @rm -f libboard$(LIBEXT) *~ .*.swp + $(call CLEAN) + +distclean: clean + @rm -f Make.dep .depend + +-include Make.dep diff --git a/nuttx/configs/stm3210e-eval/src/README.txt b/nuttx/configs/stm3210e-eval/src/README.txt new file mode 100755 index 000000000..d4eda82fd --- /dev/null +++ b/nuttx/configs/stm3210e-eval/src/README.txt @@ -0,0 +1 @@ +This directory contains drivers unique to the STMicro STM3210E-EVAL development board. diff --git a/nuttx/configs/stm3210e-eval/src/stm3210e-internal.h b/nuttx/configs/stm3210e-eval/src/stm3210e-internal.h new file mode 100755 index 000000000..3e5018c26 --- /dev/null +++ b/nuttx/configs/stm3210e-eval/src/stm3210e-internal.h @@ -0,0 +1,87 @@ +/************************************************************************************
+ * configs/stm3210e_eval/src/stm3210e_internal.h
+ * arch/arm/src/board/stm3210e_internal.n
+ *
+ * Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __CONFIGS_STM3210E_EVAL_SRC_STM3210E_INTERNAL_H
+#define __CONFIGS_STM3210E_EVAL_SRC_STM3210E_INTERNAL_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/compiler.h>
+#include <sys/types.h>
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* How many SPI modules does this chip support? The LM3S6918 supports 2 SPI
+ * modules (others may support more -- in such case, the following must be
+ * expanded).
+ */
+
+#if STM32_NSPI == 0
+# undef CONFIG_SPI1_DISABLE
+# define CONFIG_SPI1_DISABLE 1
+# undef CONFIG_SPI2_DISABLE
+# define CONFIG_SPI2_DISABLE 1
+#elif STM32_NSPI == 1
+# undef CONFIG_SPI2_DISABLE
+# define CONFIG_SPI2_DISABLE 1
+#endif
+
+/* STM3210E-EVAL GPIOs **************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ * Called to configure SPI chip select GPIO pins for the STM3210E-EVAL board.
+ *
+ ************************************************************************************/
+
+extern void weak_function stm32_spiinitialize(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __CONFIGS_STM3210E_EVAL_SRC_STM3210E_INTERNAL_H */
+
diff --git a/nuttx/configs/stm3210e-eval/src/up_boot.c b/nuttx/configs/stm3210e-eval/src/up_boot.c new file mode 100755 index 000000000..9807f5686 --- /dev/null +++ b/nuttx/configs/stm3210e-eval/src/up_boot.c @@ -0,0 +1,91 @@ +/************************************************************************************
+ * configs/stm3210e-eval/src/up_boot.c
+ * arch/arm/src/board/up_boot.c
+ *
+ * Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "stm3210e_internal.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ * All STM32 architectures must provide the following entry point. This entry point
+ * is called early in the intitialization -- after all memory has been configured
+ * and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void stm32_boardinitialize(void)
+{
+ /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
+ * stm32_spiinitialize() has been brought into the link.
+ */
+
+#if !defined(CONFIG_SPI1_DISABLE) || !defined(CONFIG_SPI2_DISABLE)
+ if (stm32_spiinitialize)
+ {
+ stm32_spiinitialize();
+ }
+#endif
+
+ /* Configure on-board LEDs if LED support has been selected. */
+
+#ifdef CONFIG_ARCH_LEDS
+ up_ledinit();
+#endif
+}
diff --git a/nuttx/configs/stm3210e-eval/src/up_leds.c b/nuttx/configs/stm3210e-eval/src/up_leds.c new file mode 100755 index 000000000..175dfabff --- /dev/null +++ b/nuttx/configs/stm3210e-eval/src/up_leds.c @@ -0,0 +1,109 @@ +/**************************************************************************** + * configs/stm3210e_eval/src/up_leds.c + * arch/arm/src/board/up_leds.c + * + * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> +#include <sys/types.h> + +#include <debug.h> + +#include <arch/board/board.h> + +#include "chip.h" +#include "up_arch.h" +#include "up_internal.h" +#include "stm32_internal.h" +#include "stm3210e_internal.h" + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/* Enables debug output from this file (needs CONFIG_DEBUG with + * CONFIG_DEBUG_VERBOSE too) + */ + +#undef LED_DEBUG /* Define to enable debug */ + +#ifdef LED_DEBUG +# define leddbg lldbg +# define ledvdbg llvdbg +#else +# define leddbg(x...) +# define ledvdbg(x...) +#endif + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_ledinit + ****************************************************************************/ + +#ifdef CONFIG_ARCH_LEDS +void up_ledinit(void) +{ +} + +/**************************************************************************** + * Name: up_ledon + ****************************************************************************/ + +void up_ledon(int led) +{ +} + +/**************************************************************************** + * Name: up_ledoff + ****************************************************************************/ + +void up_ledoff(int led) +{ +} + +#endif /* CONFIG_ARCH_LEDS */ diff --git a/nuttx/configs/stm3210e-eval/src/up_nsh.c b/nuttx/configs/stm3210e-eval/src/up_nsh.c new file mode 100755 index 000000000..6c5332fe1 --- /dev/null +++ b/nuttx/configs/stm3210e-eval/src/up_nsh.c @@ -0,0 +1,140 @@ +/**************************************************************************** + * config/stm3210e_eval/src/up_nsh.c + * arch/arm/src/board/up_nsh.c + * + * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> +#include <sys/types.h> + +#include <stdio.h> +#include <debug.h> +#include <errno.h> + +#include <nuttx/spi.h> +#include <nuttx/mmcsd.h> + +/**************************************************************************** + * Pre-Processor Definitions + ****************************************************************************/ + +/* Configuration ************************************************************/ + +/* PORT and SLOT number probably depend on the board configuration */ + +/* Can't support USB features if USB is not enabled */ + +#ifndef CONFIG_USBDEV +# undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV +#endif + +/* Can't support MMC/SD features if mountpoints are disabled */ + +#if defined(CONFIG_DISABLE_MOUNTPOINT) +# undef CONFIG_EXAMPLES_NSH_HAVEMMCSD +#endif + +#ifndef CONFIG_EXAMPLES_NSH_MMCSDMINOR +# define CONFIG_EXAMPLES_NSH_MMCSDMINOR 0 +#endif + +/* Debug ********************************************************************/ + +#ifdef CONFIG_CPP_HAVE_VARARGS +# ifdef CONFIG_DEBUG +# define message(...) lib_lowprintf(__VA_ARGS__) +# else +# define message(...) printf(__VA_ARGS__) +# endif +#else +# ifdef CONFIG_DEBUG +# define message lib_lowprintf +# else +# define message printf +# endif +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: nsh_archinitialize + * + * Description: + * Perform architecture specific initialization + * + ****************************************************************************/ + +int nsh_archinitialize(void) +{ + FAR struct spi_dev_s *spi; + int ret; + + /* Get the SPI port */ + + message("nsh_archinitialize: Initializing SPI port %d\n", + CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO); + + spi = up_spiinitialize(CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO); + if (!spi) + { + message("nsh_archinitialize: Failed to initialize SPI port %d\n", + CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO); + return -ENODEV; + } + + message("nsh_archinitialize: Successfully initialized SPI port %d\n", + CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO); + + /* Bind the SPI port to the slot */ + + message("nsh_archinitialize: Binding SPI port %d to MMC/SD slot %d\n", + CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO, CONFIG_EXAMPLES_NSH_MMCSDSLOTNO); + + ret = mmcsd_spislotinitialize(CONFIG_EXAMPLES_NSH_MMCSDMINOR, CONFIG_EXAMPLES_NSH_MMCSDSLOTNO, spi); + if (ret < 0) + { + message("nsh_archinitialize: Failed to bind SPI port %d to MMC/SD slot %d: %d\n", + CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO, CONFIG_EXAMPLES_NSH_MMCSDSLOTNO, ret); + return ret; + } + + message("nsh_archinitialize: Successfuly bound SPI port %d to MMC/SD slot %d\n", + CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO, CONFIG_EXAMPLES_NSH_MMCSDSLOTNO); + return OK; +} diff --git a/nuttx/configs/stm3210e-eval/src/up_spi.c b/nuttx/configs/stm3210e-eval/src/up_spi.c new file mode 100755 index 000000000..8599eff2b --- /dev/null +++ b/nuttx/configs/stm3210e-eval/src/up_spi.c @@ -0,0 +1,142 @@ +/************************************************************************************
+ * configs/stm3210e_eval/src/up_spi.c
+ * arch/arm/src/board/up_spi.c
+ *
+ * Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+
+#include <debug.h>
+
+#include <nuttx/spi.h>
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "chip.h"
+#include "stm32_internal.h"
+#include "stm3210e_internal.h"
+
+#if !defined(CONFIG_SPI1_DISABLE) || !defined(CONFIG_SPI2_DISABLE)
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Enables debug output from this file (needs CONFIG_DEBUG too) */
+
+#undef SPI_DEBUG /* Define to enable debug */
+#undef SPI_VERBOSE /* Define to enable verbose debug */
+
+#ifdef SPI_DEBUG
+# define spidbg lldbg
+# ifdef SPI_VERBOSE
+# define spivdbg lldbg
+# else
+# define spivdbg(x...)
+# endif
+#else
+# undef SPI_VERBOSE
+# define spidbg(x...)
+# define spivdbg(x...)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ * Called to configure SPI chip select GPIO pins for the STM3210E-EVAL board.
+ *
+ ************************************************************************************/
+
+void weak_function stm32_spiinitialize(void)
+{
+ /* Configure the SPI-based microSD CS GPIO */
+}
+
+/****************************************************************************
+ * The external functions, stm32_spi1/2select and stm32_spi1/2status must be
+ * provided by board-specific logic. These are implementations of the
+ * select and status methods SPI interface defined by struct spi_ops_s (see
+ * include/nuttx/spi.h). All other methods (including up_spiinitialize())
+ * are provided by common logic. To use this common SPI logic on your board:
+ *
+ * 1. Provide stm32_spi1/2select() and stm32_spi1/2status() functions in your
+ * board-specific logic. This function will perform chip selection and
+ * status operations using GPIOs in the way your board is configured.
+ * 2. Add a call to up_spiinitialize() in your low level initialization
+ * logic
+ * 3. The handle returned by up_spiinitialize() may then be used to bind the
+ * SPI driver to higher level logic (e.g., calling
+ * mmcsd_spislotinitialize(), for example, will bind the SPI driver to
+ * the SPI MMC/SD driver).
+ *
+ ****************************************************************************/
+
+#ifndef CONFIG_SPI1_DISABLE
+void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, boolean selected)
+{
+ spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+}
+
+ubyte stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+ return SPI_STATUS_PRESENT;
+}
+#endif
+
+#ifndef CONFIG_SPI2_DISABLE
+void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, boolean selected)
+{
+ spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+}
+
+ubyte stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+ return SPI_STATUS_PRESENT;
+}
+#endif
+
+#endif /* !CONFIG_SPI1_DISABLE || !CONFIG_SPI2_DISABLE */
|