diff options
| -rw-r--r-- | nuttx/configs/mcu123-lpc214x/README.txt | 25 | ||||
| -rwxr-xr-x | nuttx/configs/stm3210e-eval/README.txt | 24 |
2 files changed, 39 insertions, 10 deletions
diff --git a/nuttx/configs/mcu123-lpc214x/README.txt b/nuttx/configs/mcu123-lpc214x/README.txt index 969f3495e..02f9d9ea7 100644 --- a/nuttx/configs/mcu123-lpc214x/README.txt +++ b/nuttx/configs/mcu123-lpc214x/README.txt @@ -1,6 +1,9 @@ README ^^^^^^ +This README discusses issues unique to NuttX configurations for the +MCU-123 LPC2148 development board. + Development Environment ^^^^^^^^^^^^^^^^^^^^^^^ @@ -293,17 +296,23 @@ can be selected as follow: Where <subdir> is one of the following: -ostest -^^^^^^ +ostest: + This configuration directory, performs a simple OS test using + examples/ostest. -This configuration directory, performs a simple OS test using -examples/ostest. +nsh: + Configures the NuttShell (nsh) located at examples/nsh. The + Configuration enables only the serial NSH interfaces. -nsh -^^^ +usbserial: + This configuration directory exercises the USB serial class + driver at examples/usbserial. See examples/README.txt for + more information. -Configures the NuttShell (nsh) located at examples/nsh. The -Configuration enables only the serial NSH interfaces. +usbstorage: + This configuration directory exercises the USB mass storage + class driver at examples/usbstorage. See examples/README.txt for + more information. Configuration Options ^^^^^^^^^^^^^^^^^^^^^ diff --git a/nuttx/configs/stm3210e-eval/README.txt b/nuttx/configs/stm3210e-eval/README.txt index 70fd9d317..46ee8fb4f 100755 --- a/nuttx/configs/stm3210e-eval/README.txt +++ b/nuttx/configs/stm3210e-eval/README.txt @@ -1,6 +1,21 @@ README ^^^^^^ +This README discusses issues unique to NuttX configurations for the +STMicro STM3210E-EVAL development board. + +Contents +^^^^^^^^ + + - Development Environment + - GNU Toolchain Options + - IDEs + - NuttX buildroot Toolchain + - DFU + - LEDs + - STM3210E-EVAL-specific Configuration Options + - Configurations + Development Environment ^^^^^^^^^^^^^^^^^^^^^^^ @@ -141,8 +156,9 @@ DFU ^^^ The linker files in these projects can be configured to indicate that you - will be loading code using STMicro built-in USB DFU loader or via some JTAG - emulator. You can specify the DFU bootloader by adding the following line: + will be loading code using STMicro built-in USB Device Firmware Upgrade (DFU) + loader or via some JTAG emulator. You can specify the DFU bootloader by + adding the following line: CONFIG_STM32_DFU=y @@ -392,3 +408,7 @@ Where <subdir> is one of the following: This configuration builds a trivial bring-up binary. It is useful only because it words with the RIDE7 IDE and R-Link debugger. + usbserial: + This configuration directory exercises the USB serial class + driver at examples/usbserial. See examples/README.txt for + more information. |