diff options
Diffstat (limited to 'nuttx/arch/arm/src/common/up_vectors.S')
| -rw-r--r-- | nuttx/arch/arm/src/common/up_vectors.S | 449 |
1 files changed, 449 insertions, 0 deletions
diff --git a/nuttx/arch/arm/src/common/up_vectors.S b/nuttx/arch/arm/src/common/up_vectors.S new file mode 100644 index 000000000..648060218 --- /dev/null +++ b/nuttx/arch/arm/src/common/up_vectors.S @@ -0,0 +1,449 @@ +/******************************************************************** + * common/up_vectors.S + * + * Copyright (C) 2007 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name Gregory Nutt nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ********************************************************************/ + +/******************************************************************** + * Included Files + ********************************************************************/ + +#include <nuttx/config.h> +#include <nuttx/irq.h> +#include "up_arch.h" + +/******************************************************************** + * Definitions + ********************************************************************/ + +/******************************************************************** + * Global Data + ********************************************************************/ + + .data +g_irqtmp: + .word 0 /* Saved lr */ + .word 0 /* Saved spsr */ +g_undeftmp: + .word 0 /* Saved lr */ + .word 0 /* Saved spsr */ +g_aborttmp: + .word 0 /* Saved lr */ + .word 0 /* Saved spsr */ + +/******************************************************************** + * Assembly Macros + ********************************************************************/ + +/******************************************************************** + * Private Functions + ********************************************************************/ + + .text + +/******************************************************************** + * Public Functions + ********************************************************************/ + + .text + +/******************************************************************** + * Name: up_vectorirq + * + * Description: + * Interrupt excetpion. Entered in IRQ mode with spsr = SVC + * CPSR, lr = SVC PC + ********************************************************************/ + + .globl up_vectorirq + .type up_vectorirq, %function +up_vectorirq: + /* On entry, we are in IRQ mode. We are free to use + * the IRQ mode r13 and r14. + * + */ + + ldr r13, .Lirqtmp + sub lr, lr, #4 + str lr, [r13] @ save lr_IRQ + mrs lr, spsr + str lr, [r13, #4] @ save spsr_IRQ + + /* Then switch back to SVC mode */ + + bic lr, lr, #MODE_MASK /* Keep F and T bits */ + orr lr, lr, #(SVC_MODE | PSR_I_BIT) + msr cpsr_c, lr /* Switch to SVC mode */ + + /* Create a context structure. First set aside a stack frame + * and store r0-r12 into the frame. + */ + + sub sp, sp, #XCPTCONTEXT_SIZE + stmia sp, {r0-r12} /* Save the SVC mode regs */ + + /* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */ + + add r1, sp, #XCPTCONTEXT_SIZE + mov r2, r14 + + /* Get the values for r15(pc) and CPSR in r3 and r4 */ + + ldr r0, .Lirqtmp /* Points to temp storage */ + ldmia r0, {r3, r4} /* Recover r1=lr_IRQ, r2=spsr_IRQ */ + + add r0, sp, #(4*REG_SP) /* Offset to pc, cpsr storage */ + stmia r0, {r1-r4} + + /* Then call the IRQ handler with interrupts disabled. */ + + mov fp, #0 /* Init frame pointer */ + mov r0, sp /* Get r0=xcp */ + bl up_doirq /* Call the handler */ + + /* Restore the CPSR, SVC modr registers and return */ +.Lnoirqset: + ldr r0, [sp, #(4*REG_CPSR)] /* Setup the SVC mode SPSR */ + msr spsr, r0 + ldmia sp, {r0-r15}^ /* Return */ + +.Lirqtmp: + .word g_irqtmp + + .align 5 + +/******************************************************************** + * Function: up_vectorswi + * + * Description: + * SWI interrupt. We enter the SWI in SVC mode + ********************************************************************/ + + .globl up_vectorswi + .type up_vectorswi, %function +up_vectorswi: + + /* Create a context structure. First set aside a stack frame + * and store r0-r12 into the frame. + */ + + sub sp, sp, #XCPTCONTEXT_SIZE + stmia sp, {r0-r12} /* Save the SVC mode regs */ + + /* Get the correct values of r13(sp), r14(lr), r15(pc) + * and CPSR in r1-r4 */ + + add r1, sp, #XCPTCONTEXT_SIZE + mov r2, r14 /* R14 is altered on return from SWI */ + mov r3, r14 /* Save r14 as the PC as well */ + mrs r4, spsr /* Get the saved CPSR */ + + add r0, sp, #(4*REG_SP) /* Offset to pc, cpsr storage */ + stmia r0, {r1-r4} + + /* Then call the SWI handler with interrupts disabled. + * void up_syscall(struct xcptcontext *xcp) + */ + + mov fp, #0 /* Init frame pointer */ + mov r0, sp /* Get r0=xcp */ + bl up_syscall /* Call the handler */ + + /* Restore the CPSR, SVC modr registers and return */ + + ldr r0, [sp, #(4*REG_CPSR)] /* Setup the SVC mode SPSR */ + msr spsr, r0 + ldmia sp, {r0-r15}^ /* Return */ + + .align 5 + +/******************************************************************** + * Name: up_vectordata + * + * Description: + * Data abort Exception dispatcher. Give control to data + * abort handler. This function is entered in ABORT mode + * with spsr = SVC CPSR, lr = SVC PC + * + ********************************************************************/ + + .globl up_vectordata + .type up_vectordata, %function +up_vectordata: + /* On entry we are free to use the ABORT mode registers + * r13 and r14 + */ + + ldr r13, .Ldaborttmp /* Points to temp storage */ + sub lr, lr, #8 /* Fixup return */ + str lr, [r13] /* Save in temp storage */ + mrs lr, spsr /* Get SPSR */ + str lr, [r13, #4] /* Save in temp storage */ + + /* Then switch back to SVC mode */ + + bic lr, lr, #MODE_MASK /* Keep F and T bits */ + orr lr, lr, #(SVC_MODE | PSR_I_BIT) + msr cpsr_c, lr /* Switch to SVC mode */ + + /* Create a context structure. First set aside a stack frame + * and store r0-r12 into the frame. + */ + + sub sp, sp, #XCPTCONTEXT_SIZE + stmia sp, {r0-r12} /* Save the SVC mode regs */ + + /* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */ + + add r1, sp, #XCPTCONTEXT_SIZE + mov r2, r14 + + /* Get the values for r15(pc) and CPSR in r3 and r4 */ + + ldr r0, .Ldaborttmp /* Points to temp storage */ + ldmia r0, {r3, r4} /* Recover r1=lr_IRQ, r2=spsr_IRQ */ + + add r0, sp, #(4*REG_SP) /* Offset to pc, cpsr storage */ + stmia r0, {r1-r4} + + /* Then call the data abort handler with interrupts disabled. + * void up_dataabort(struct xcptcontext *xcp) + */ + + mov fp, #0 /* Init frame pointer */ + mov r0, sp /* Get r0=xcp */ + bl up_dataabort /* Call the handler */ + + /* Restore the CPSR, SVC modr registers and return */ + + ldr r0, [sp, #(4*REG_CPSR)] /* Setup the SVC mode SPSR */ + msr spsr_cxsf, r0 + ldmia sp, {r0-r15}^ /* Return */ + +.Ldaborttmp: + .word g_aborttmp + + .align 5 + +/******************************************************************** + * Name: up_vectorprefetch + * + * Description: + * Prefetch abort exception. Entered in ABT mode with + * spsr = SVC CPSR, lr = SVC PC + ********************************************************************/ + + .globl up_vectorprefetch + .type up_vectorprefetch, %function +up_vectorprefetch: + /* On entry we are free to use the ABORT mode registers + * r13 and r14 + */ + + ldr r13, .Lpaborttmp /* Points to temp storage */ + sub lr, lr, #4 /* Fixup return */ + str lr, [r13] /* Save in temp storage */ + mrs lr, spsr /* Get SPSR */ + str lr, [r13, #4] /* Save in temp storage */ + + /* Then switch back to SVC mode */ + + bic lr, lr, #MODE_MASK /* Keep F and T bits */ + orr lr, lr, #(SVC_MODE | PSR_I_BIT) + msr cpsr_c, lr /* Switch to SVC mode */ + + /* Create a context structure. First set aside a stack frame + * and store r0-r12 into the frame. + */ + + sub sp, sp, #XCPTCONTEXT_SIZE + stmia sp, {r0-r12} /* Save the SVC mode regs */ + + /* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */ + + add r1, sp, #XCPTCONTEXT_SIZE + mov r2, r14 + + /* Get the values for r15(pc) and CPSR in r3 and r4 */ + + ldr r0, .Lpaborttmp /* Points to temp storage */ + ldmia r0, {r3, r4} /* Recover r1=lr_IRQ, r2=spsr_IRQ */ + + add r0, sp, #(4*REG_SP) /* Offset to pc, cpsr storage */ + stmia r0, {r1-r4} + + /* Then call the prefetch abort handler with interrupts disabled. + * void up_prefetchabort(struct xcptcontext *xcp) + */ + + mov fp, #0 /* Init frame pointer */ + mov r0, sp /* Get r0=xcp */ + bl up_prefetchabort /* Call the handler */ + + /* Restore the CPSR, SVC modr registers and return */ + + ldr r0, [sp, #(4*REG_CPSR)] /* Setup the SVC mode SPSR */ + msr spsr_cxsf, r0 + ldmia sp, {r0-r15}^ /* Return */ + +.Lpaborttmp: + .word g_aborttmp + + .align 5 + +/******************************************************************** + * Name: up_vectorundefinsn + * + * Description: + * Undefined instruction entry exception. Entered in + * UND mode, spsr = SVC CPSR, lr = SVC PC + * + ********************************************************************/ + + .globl up_vectorundefinsn + .type up_vectorundefinsn, %function +up_vectorundefinsn: + /* On entry we are free to use the UND mode registers + * r13 and r14 + */ + + ldr r13, .Lundeftmp /* Points to temp storage */ + str lr, [r13] /* Save in temp storage */ + mrs lr, spsr /* Get SPSR */ + str lr, [r13, #4] /* Save in temp storage */ + + /* Then switch back to SVC mode */ + + bic lr, lr, #MODE_MASK /* Keep F and T bits */ + orr lr, lr, #(SVC_MODE | PSR_I_BIT) + msr cpsr_c, lr /* Switch to SVC mode */ + + /* Create a context structure. First set aside a stack frame + * and store r0-r12 into the frame. + */ + + sub sp, sp, #XCPTCONTEXT_SIZE + stmia sp, {r0-r12} /* Save the SVC mode regs */ + + /* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */ + + add r1, sp, #XCPTCONTEXT_SIZE + mov r2, r14 + + /* Get the values for r15(pc) and CPSR in r3 and r4 */ + + ldr r0, .Lundeftmp /* Points to temp storage */ + ldmia r0, {r3, r4} /* Recover r1=lr_IRQ, r2=spsr_IRQ */ + + add r0, sp, #(4*REG_SP) /* Offset to pc, cpsr storage */ + stmia r0, {r1-r4} + + /* Then call the undef insn handler with interrupts disabled. + * void up_undefinedinsn(struct xcptcontext *xcp) + */ + + mov fp, #0 /* Init frame pointer */ + mov r0, sp /* Get r0=xcp */ + bl up_undefinedinsn /* Call the handler */ + + /* Restore the CPSR, SVC modr registers and return */ + + ldr r0, [sp, #(4*REG_CPSR)] /* Setup the SVC mode SPSR */ + msr spsr_cxsf, r0 + ldmia sp, {r0-r15}^ /* Return */ + +.Lundeftmp: + .word g_undeftmp + + .align 5 + +/******************************************************************** + * Name: up_vectorfiq + * + * Description: + * Shouldn't happen + ********************************************************************/ + + .globl up_vectorfiq + .type up_vectorfiq, %function +up_vectorfiq: + subs pc, lr, #4 + +/******************************************************************** + * Name: up_vectoraddrexcption + * + * Description: + * Shouldn't happen + * + ********************************************************************/ + + .globl up_vectoraddrexcptn + .type up_vectoraddrexcptn, %function +up_vectoraddrexcptn: + b up_vectoraddrexcptn + +/************************************************************************** + * Vector initialization block. + **************************************************************************/ + +/* These will be relocated to VECTOR_BASE. */ + + .globl _vector_start +_vector_start: + ldr pc, .Lresethandler /* 0x00: Reset */ + ldr pc, .Lundefinedhandler /* 0x04: Undefined instruction */ + ldr pc, .Lswihandler /* 0x08: Software interrupt */ + ldr pc, .Lprefetchaborthandler /* 0x0c: Prefetch abort */ + ldr pc, .Ldataaborthandler /* 0x10: Data abort */ + ldr pc, .Laddrexcptnhandler /* 0x14: Address exception */ + ldr pc, .Lirqhandler /* 0x18: IRQ */ + ldr pc, .Lfiqhandler /* 0x1c: FIQ */ + +.Lresethandler: + .long __start +.Lundefinedhandler: + .long up_vectorundefinsn +.Lswihandler: + .long up_vectorswi +.Lprefetchaborthandler: + .long up_vectorprefetch +.Ldataaborthandler: + .long up_vectordata +.Laddrexcptnhandler: + .long up_vectoraddrexcptn +.Lirqhandler: + .long up_vectorirq +.Lfiqhandler: + .long up_vectorfiq + .globl _vector_end +_vector_end: + .end |