diff options
Diffstat (limited to 'nuttx/arch/arm/src/kinetis/kinetis_serial.c')
| -rw-r--r-- | nuttx/arch/arm/src/kinetis/kinetis_serial.c | 1237 |
1 files changed, 1237 insertions, 0 deletions
diff --git a/nuttx/arch/arm/src/kinetis/kinetis_serial.c b/nuttx/arch/arm/src/kinetis/kinetis_serial.c new file mode 100644 index 000000000..6c9e4af94 --- /dev/null +++ b/nuttx/arch/arm/src/kinetis/kinetis_serial.c @@ -0,0 +1,1237 @@ +/**************************************************************************** + * arch/mips/src/kinetis/kinetis_serial.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <sys/types.h> +#include <stdint.h> +#include <stdbool.h> +#include <unistd.h> +#include <semaphore.h> +#include <string.h> +#include <errno.h> +#include <debug.h> + +#include <nuttx/irq.h> +#include <nuttx/arch.h> +#include <nuttx/serial.h> + +#include <arch/board/board.h> + +#include "up_arch.h" +#include "up_internal.h" +#include "os_internal.h" + +#include "kinetis_config.h" +#include "chip.h" +#include "kinetis_uart.h" +#include "kinetis_internal.h" + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ +/* Some sanity checks *******************************************************/ +/* Is there at least one UART enabled and configured as a RS-232 device? */ + +#ifndef HAVE_UART_DEVICE +# warning "No UARTs enabled" +#endif + +/* If we are not using the serial driver for the console, then we still must + * provide some minimal implementation of up_putc. + */ + +#ifdef CONFIG_USE_SERIALDRIVER + +/* Which UART with be tty0/console and which tty1-4? The console will always + * be ttyS0. If there is no console then will use the lowest numbered UART. + */ + +/* First pick the console and ttys0. This could be any of UART0-5 */ + +#if defined(CONFIG_UART0_SERIAL_CONSOLE) +# define CONSOLE_DEV g_uart0port /* UART0 is console */ +# define TTYS0_DEV g_uart0port /* UART0 is ttyS0 */ +# define UART0_ASSIGNED 1 +#elif defined(CONFIG_UART1_SERIAL_CONSOLE) +# define CONSOLE_DEV g_uart1port /* UART1 is console */ +# define TTYS0_DEV g_uart1port /* UART1 is ttyS0 */ +# define UART1_ASSIGNED 1 +#elif defined(CONFIG_UART2_SERIAL_CONSOLE) +# define CONSOLE_DEV g_uart2port /* UART2 is console */ +# define TTYS0_DEV g_uart2port /* UART2 is ttyS0 */ +# define UART2_ASSIGNED 1 +#elif defined(CONFIG_UART2_SERIAL_CONSOLE) +# define CONSOLE_DEV g_uart3port /* UART3 is console */ +# define TTYS0_DEV g_uart3port /* UART3 is ttyS0 */ +# define UART3_ASSIGNED 1 +#elif defined(CONFIG_UART4_SERIAL_CONSOLE) +# define CONSOLE_DEV g_uart4port /* UART4 is console */ +# define TTYS0_DEV g_uart4port /* UART4 is ttyS0 */ +# define UART4_ASSIGNED 1 +#elif defined(CONFIG_UART5_SERIAL_CONSOLE) +# define CONSOLE_DEV g_uart5port /* UART5 is console */ +# define TTYS5_DEV g_uart5port /* UART5 is ttyS0 */ +#else +# undef CONSOLE_DEV /* No console */ +# if defined(CONFIG_KINETIS_UART0) +# define TTYS0_DEV g_uart0port /* UART0 is ttyS0 */ +# define UART0_ASSIGNED 1 +# elif defined(CONFIG_KINETIS_UART1) +# define TTYS0_DEV g_uart1port /* UART1 is ttyS0 */ +# define UART1_ASSIGNED 1 +# elif defined(CONFIG_KINETIS_UART2) +# define TTYS0_DEV g_uart2port /* UART2 is ttyS0 */ +# define UART2_ASSIGNED 1 +# elif defined(CONFIG_KINETIS_UART3) +# define TTYS0_DEV g_uart3port /* UART3 is ttyS0 */ +# define UART3_ASSIGNED 1 +# elif defined(CONFIG_KINETIS_UART4) +# define TTYS0_DEV g_uart4port /* UART4 is ttyS0 */ +# define UART4_ASSIGNED 1 +# elif defined(CONFIG_KINETIS_UART5) +# define TTYS0_DEV g_uart5port /* UART5 is ttyS0 */ +# define UART5_ASSIGNED 1 +# endif +#endif + +/* Pick ttys1. This could be any of UART0-5 excluding the console UART. */ + +#if defined(CONFIG_KINETIS_UART0) && !defined(UART0_ASSIGNED) +# define TTYS1_DEV g_uart0port /* UART0 is ttyS1 */ +# define UART0_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART1) && !defined(UART1_ASSIGNED) +# define TTYS1_DEV g_uart1port /* UART1 is ttyS1 */ +# define UART1_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART2) && !defined(UART2_ASSIGNED) +# define TTYS1_DEV g_uart2port /* UART2 is ttyS1 */ +# define UART2_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART3) && !defined(UART3_ASSIGNED) +# define TTYS1_DEV g_uart3port /* UART3 is ttyS1 */ +# define UART3_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART4) && !defined(UART4_ASSIGNED) +# define TTYS1_DEV g_uart4port /* UART4 is ttyS1 */ +# define UART4_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART5) && !defined(UART5_ASSIGNED) +# define TTYS1_DEV g_uart5port /* UART5 is ttyS1 */ +# define UART5_ASSIGNED 1 +#endif + +/* Pick ttys2. This could be one of UART1-5. It can't be UART0 because that + * was either assigned as ttyS0 or ttys1. One of UART 1-5 could be the + * console. + */ + +#if defined(CONFIG_KINETIS_UART1) && !defined(UART1_ASSIGNED) +# define TTYS2_DEV g_uart1port /* UART1 is ttyS2 */ +# define UART1_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART2) && !defined(UART2_ASSIGNED) +# define TTYS2_DEV g_uart2port /* UART2 is ttyS2 */ +# define UART2_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART3) && !defined(UART3_ASSIGNED) +# define TTYS2_DEV g_uart3port /* UART3 is ttyS2 */ +# define UART3_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART4) && !defined(UART4_ASSIGNED) +# define TTYS2_DEV g_uart4port /* UART4 is ttyS2 */ +# define UART4_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART5) && !defined(UART5_ASSIGNED) +# define TTYS2_DEV g_uart5port /* UART5 is ttyS2 */ +# define UART5_ASSIGNED 1 +#endif + +/* Pick ttys3. This could be one of UART2-5. It can't be UART0-1 because + * those have already been assigned to ttsyS0, 1, or 2. One of + * UART 2-5 could be the console. + */ + +#if defined(CONFIG_KINETIS_UART2) && !defined(UART2_ASSIGNED) +# define TTYS3_DEV g_uart2port /* UART2 is ttyS3 */ +# define UART2_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART3) && !defined(UART3_ASSIGNED) +# define TTYS3_DEV g_uart3port /* UART3 is ttyS3 */ +# define UART3_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART4) && !defined(UART4_ASSIGNED) +# define TTYS3_DEV g_uart4port /* UART4 is ttyS3 */ +# define UART4_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART5) && !defined(UART5_ASSIGNED) +# define TTYS3_DEV g_uart5port /* UART5 is ttyS3 */ +# define UART5_ASSIGNED 1 +#endif + +/* Pick ttys4. This could be one of UART3-5. It can't be UART0-2 because + * those have already been assigned to ttsyS0, 1, 2 or 3. One of + * UART 3-5 could be the console. + */ + +#if defined(CONFIG_KINETIS_UART3) && !defined(UART3_ASSIGNED) +# define TTYS4_DEV g_uart3port /* UART3 is ttyS4 */ +# define UART3_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART4) && !defined(UART4_ASSIGNED) +# define TTYS4_DEV g_uart4port /* UART4 is ttyS4 */ +# define UART4_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART5) && !defined(UART5_ASSIGNED) +# define TTYS4_DEV g_uart5port /* UART5 is ttyS4 */ +# define UART5_ASSIGNED 1 +#endif + +/* Pick ttys5. This could be one of UART4-5. It can't be UART0-3 because + * those have already been assigned to ttsyS0, 1, 2, 3 or 4. One of + * UART 4-5 could be the console. + */ + +#if defined(CONFIG_KINETIS_UART4) && !defined(UART4_ASSIGNED) +# define TTYS5_DEV g_uart4port /* UART4 is ttyS5 */ +# define UART4_ASSIGNED 1 +#elif defined(CONFIG_KINETIS_UART5) && !defined(UART5_ASSIGNED) +# define TTYS5_DEV g_uart5port /* UART5 is ttyS5 */ +# define UART5_ASSIGNED 1 +#endif + +/* These values describe the set of enabled interrupts */ + +#define IE_RX (1 << 0) +#define IE_TX (1 << 1) + +#define RX_ENABLED(im) (((im) & IE_RX) != 0) +#define TX_ENABLED(im) (((im) & IE_TX) != 0) + +#define ENABLE_RX(im) do { (im) |= IE_RX; } while (0) +#define ENABLE_TX(im) do { (im) |= IE_TX; } while (0) + +#define DISABLE_RX(im) do { (im) &= ~IE_RX; } while (0) +#define DISABLE_TX(im) do { (im) &= ~IE_TX; } while (0) + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +struct up_dev_s +{ + uintptr_t uartbase; /* Base address of UART registers */ + uint32_t baud; /* Configured baud */ + uint32_t clock; /* Clocking frequency of the UART module */ +#ifdef CONFIG_DEBUG + uint8_t irqe; /* Error IRQ associated with this UART (for enable) */ +#endif + uint8_t irqs; /* Status IRQ associated with this UART (for enable) */ + uint8_t irqprio; /* Interrupt priority */ + uint8_t ie; /* Interrupts enabled */ + uint8_t parity; /* 0=none, 1=odd, 2=even */ + uint8_t bits; /* Number of bits (8 or 9) */ +}; + +/**************************************************************************** + * Private Function Prototypes + ****************************************************************************/ + +static int up_setup(struct uart_dev_s *dev); +static void up_shutdown(struct uart_dev_s *dev); +static int up_attach(struct uart_dev_s *dev); +static void up_detach(struct uart_dev_s *dev); +#ifdef CONFIG_DEBUG +static int up_interrupte(int irq, void *context); +#endif +static int up_interrupts(int irq, void *context); +static int up_ioctl(struct file *filep, int cmd, unsigned long arg); +static int up_receive(struct uart_dev_s *dev, uint32_t *status); +static void up_rxint(struct uart_dev_s *dev, bool enable); +static bool up_rxavailable(struct uart_dev_s *dev); +static void up_send(struct uart_dev_s *dev, int ch); +static void up_txint(struct uart_dev_s *dev, bool enable); +static bool up_txready(struct uart_dev_s *dev); +static bool up_txempty(struct uart_dev_s *dev); + +/**************************************************************************** + * Private Variables + ****************************************************************************/ + +struct uart_ops_s g_uart_ops = +{ + .setup = up_setup, + .shutdown = up_shutdown, + .attach = up_attach, + .detach = up_detach, + .ioctl = up_ioctl, + .receive = up_receive, + .rxint = up_rxint, + .rxavailable = up_rxavailable, + .send = up_send, + .txint = up_txint, + .txready = up_txready, + .txempty = up_txempty, +}; + +/* I/O buffers */ + +#ifdef CONFIG_KINETIS_UART0 +static char g_uart0rxbuffer[CONFIG_UART0_RXBUFSIZE]; +static char g_uart0txbuffer[CONFIG_UART0_TXBUFSIZE]; +#endif +#ifdef CONFIG_KINETIS_UART1 +static char g_uart1rxbuffer[CONFIG_UART1_RXBUFSIZE]; +static char g_uart1txbuffer[CONFIG_UART1_TXBUFSIZE]; +#endif +#ifdef CONFIG_KINETIS_UART2 +static char g_uart2rxbuffer[CONFIG_UART2_RXBUFSIZE]; +static char g_uart2txbuffer[CONFIG_UART2_TXBUFSIZE]; +#endif +#ifdef CONFIG_KINETIS_UART2 +static char g_uart3rxbuffer[CONFIG_UART3_RXBUFSIZE]; +static char g_uart3txbuffer[CONFIG_UART3_TXBUFSIZE]; +#endif +#ifdef CONFIG_KINETIS_UART2 +static char g_uart4rxbuffer[CONFIG_UART4_RXBUFSIZE]; +static char g_uart4txbuffer[CONFIG_UART4_TXBUFSIZE]; +#endif +#ifdef CONFIG_KINETIS_UART2 +static char g_uart5rxbuffer[CONFIG_UART5_RXBUFSIZE]; +static char g_uart5txbuffer[CONFIG_UART5_TXBUFSIZE]; +#endif + +/* This describes the state of the Kinetis UART0 port. */ + +#ifdef CONFIG_KINETIS_UART0 +static struct up_dev_s g_uart0priv = +{ + .uartbase = KINETIS_UART0_BASE, + .clock = BOARD_CORECLK_FREQ, + .baud = CONFIG_UART0_BAUD, +#ifdef CONFIG_DEBUG + .irqe = KINETIS_IRQ_UART0E, +#endif + .irqs = KINETIS_IRQ_UART0S, + .irqprio = CONFIG_KINETIS_UART0PRIO, + .parity = CONFIG_UART0_PARITY, + .bits = CONFIG_UART0_BITS, +}; + +static uart_dev_t g_uart0port = +{ + .recv = + { + .size = CONFIG_UART0_RXBUFSIZE, + .buffer = g_uart0rxbuffer, + }, + .xmit = + { + .size = CONFIG_UART0_TXBUFSIZE, + .buffer = g_uart0txbuffer, + }, + .ops = &g_uart_ops, + .priv = &g_uart0priv, +}; +#endif + +/* This describes the state of the Kinetis UART1 port. */ + +#ifdef CONFIG_KINETIS_UART1 +static struct up_dev_s g_uart1priv = +{ + .uartbase = KINETIS_UART1_BASE, + .clock = BOARD_CORECLK_FREQ, + .baud = CONFIG_UART1_BAUD, +#ifdef CONFIG_DEBUG + .irqe = KINETIS_IRQ_UART1E, +#endif + .irqs = KINETIS_IRQ_UART1S, + .irqprio = CONFIG_KINETIS_UART1PRIO, + .parity = CONFIG_UART1_PARITY, + .bits = CONFIG_UART1_BITS, +}; + +static uart_dev_t g_uart1port = +{ + .recv = + { + .size = CONFIG_UART1_RXBUFSIZE, + .buffer = g_uart1rxbuffer, + }, + .xmit = + { + .size = CONFIG_UART1_TXBUFSIZE, + .buffer = g_uart1txbuffer, + }, + .ops = &g_uart_ops, + .priv = &g_uart1priv, +}; +#endif + +/* This describes the state of the Kinetis UART2 port. */ + +#ifdef CONFIG_KINETIS_UART2 +static struct up_dev_s g_uart2priv = +{ + .uartbase = KINETIS_UART2_BASE, + .clock = BOARD_BUS_FREQ, + .baud = CONFIG_UART2_BAUD, +#ifdef CONFIG_DEBUG + .irqe = KINETIS_IRQ_UART2E, +#endif + .irqs = KINETIS_IRQ_UART2S, + .irqprio = CONFIG_KINETIS_UART2PRIO, + .parity = CONFIG_UART2_PARITY, + .bits = CONFIG_UART2_BITS, +}; + +static uart_dev_t g_uart2port = +{ + .recv = + { + .size = CONFIG_UART2_RXBUFSIZE, + .buffer = g_uart2rxbuffer, + }, + .xmit = + { + .size = CONFIG_UART2_TXBUFSIZE, + .buffer = g_uart2txbuffer, + }, + .ops = &g_uart_ops, + .priv = &g_uart2priv, +}; +#endif + +/* This describes the state of the Kinetis UART3 port. */ + +#ifdef CONFIG_KINETIS_UART3 +static struct up_dev_s g_uart3priv = +{ + .uartbase = KINETIS_UART3_BASE, + .clock = BOARD_BUS_FREQ, + .baud = CONFIG_UART3_BAUD, +#ifdef CONFIG_DEBUG + .irqe = KINETIS_IRQ_UART3E, +#endif + .irqs = KINETIS_IRQ_UART3S, + .irqprio = CONFIG_KINETIS_UART3PRIO, + .parity = CONFIG_UART3_PARITY, + .bits = CONFIG_UART3_BITS, +}; + +static uart_dev_t g_uart3port = +{ + .recv = + { + .size = CONFIG_UART3_RXBUFSIZE, + .buffer = g_uart3rxbuffer, + }, + .xmit = + { + .size = CONFIG_UART3_TXBUFSIZE, + .buffer = g_uart3txbuffer, + }, + .ops = &g_uart_ops, + .priv = &g_uart3priv, +}; +#endif + +/* This describes the state of the Kinetis UART4 port. */ + +#ifdef CONFIG_KINETIS_UART4 +static struct up_dev_s g_uart4priv = +{ + .uartbase = KINETIS_UART4_BASE, + .clock = BOARD_BUS_FREQ, + .baud = CONFIG_UART4_BAUD, +#ifdef CONFIG_DEBUG + .irqe = KINETIS_IRQ_UART4E, +#endif + .irqs = KINETIS_IRQ_UART4S, + .irqprio = CONFIG_KINETIS_UART4PRIO, + .parity = CONFIG_UART4_PARITY, + .bits = CONFIG_UART4_BITS, +}; + +static uart_dev_t g_uart4port = +{ + .recv = + { + .size = CONFIG_UART4_RXBUFSIZE, + .buffer = g_uart4rxbuffer, + }, + .xmit = + { + .size = CONFIG_UART4_TXBUFSIZE, + .buffer = g_uart4txbuffer, + }, + .ops = &g_uart_ops, + .priv = &g_uart4priv, +}; +#endif + +/* This describes the state of the Kinetis UART5 port. */ + +#ifdef CONFIG_KINETIS_UART5 +static struct up_dev_s g_uart5priv = +{ + .uartbase = KINETIS_UART5_BASE, + .clock = BOARD_BUS_FREQ, + .baud = CONFIG_UART5_BAUD, +#ifdef CONFIG_DEBUG + .irqe = KINETIS_IRQ_UART5E, +#endif + .irqs = KINETIS_IRQ_UART5S, + .irqprio = CONFIG_KINETIS_UART5PRIO, + .parity = CONFIG_UART5_PARITY, + .bits = CONFIG_UART5_BITS, +}; + +static uart_dev_t g_uart5port = +{ + .recv = + { + .size = CONFIG_UART5_RXBUFSIZE, + .buffer = g_uart5rxbuffer, + }, + .xmit = + { + .size = CONFIG_UART5_TXBUFSIZE, + .buffer = g_uart5txbuffer, + }, + .ops = &g_uart_ops, + .priv = &g_uart5priv, +}; +#endif + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_serialin + ****************************************************************************/ + +static inline uint8_t up_serialin(struct up_dev_s *priv, int offset) +{ + return getreg8(priv->uartbase + offset); +} + +/**************************************************************************** + * Name: up_serialout + ****************************************************************************/ + +static inline void up_serialout(struct up_dev_s *priv, int offset, uint8_t value) +{ + putreg8(value, priv->uartbase + offset); +} + +/**************************************************************************** + * Name: up_restoreuartint + ****************************************************************************/ + +static void up_restoreuartint(struct up_dev_s *priv, uint8_t im) +{ + irqstate_t flags; + + /* Re-enable/re-disable interrupts corresponding to the state of bits in im */ + + flags = irqsave(); +#warning "Missing logic" + irqrestore(flags); +} + +/**************************************************************************** + * Name: up_disableuartint + ****************************************************************************/ + +static void up_disableuartint(struct up_dev_s *priv, uint8_t *im) +{ + irqstate_t flags; + + flags = irqsave(); + if (im) + { + *im = priv->im; + } + up_restoreint(priv, 0); + irqrestore(flags); +} + +/**************************************************************************** + * Name: up_setup + * + * Description: + * Configure the UART baud, bits, parity, etc. This method is called the + * first time that the serial port is opened. + * + ****************************************************************************/ + +static int up_setup(struct uart_dev_s *dev) +{ +#ifndef CONFIG_SUPPRESS_UART_CONFIG + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + + /* Configure the UART as an RS-232 UART */ + + uart_configure(priv->uartbase, priv->baud, priv->clock, priv->parity, + priv->bits); +#endif + + /* Set up the interrupt priority */ + + up_prioritize_irq(priv->irqs, priv->irqprio); +#ifdef CONFIG_DEBUG + up_prioritize_irq(priv->irqe, priv->irqprio); +#endif + return OK; +} + +/**************************************************************************** + * Name: up_shutdown + * + * Description: + * Disable the UART. This method is called when the serial + * port is closed + * + ****************************************************************************/ + +static void up_shutdown(struct uart_dev_s *dev) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + + /* Disable interrupts */ + + up_disableuartint(priv, NULL); + + /* Reset hardware and disable Rx and Tx */ + + uart_reset(priv->uartbase); +} + +/**************************************************************************** + * Name: up_attach + * + * Description: + * Configure the UART to operation in interrupt driven mode. This method is + * called when the serial port is opened. Normally, this is just after the + * the setup() method is called, however, the serial console may operate in + * a non-interrupt driven mode during the boot phase. + * + * RX and TX interrupts are not enabled when by the attach method (unless the + * hardware supports multiple levels of interrupt enabling). The RX and TX + * interrupts are not enabled until the txint() and rxint() methods are called. + * + ****************************************************************************/ + +static int up_attach(struct uart_dev_s *dev) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + int ret; + + /* Attach the IRQ(s) */ + + ret = irq_attach(priv->irqs, up_interrupts); +#ifdef CONFIG_DEBUG + if (ret == OK) + { + ret = irq_attach(priv->irqe, up_interrupte); + } +#endif + + return ret; +} + +/**************************************************************************** + * Name: up_detach + * + * Description: + * Detach UART interrupts. This method is called when the serial port is + * closed normally just before the shutdown method is called. The exception + * is the serial console which is never shutdown. + * + ****************************************************************************/ + +static void up_detach(struct uart_dev_s *dev) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + + /* Disable interrupts */ + + up_disableuartint(priv, NULL); + + /* Detach from the interrupt(s) */ + + irq_detach(priv->irqs); +#ifdef CONFIG_DEBUG + irq_detach(priv->irqe); +#endif +} + +/**************************************************************************** + * Name: up_interrupte + * + * Description: + * This is the UART error interrupt handler. It will be invoked when an + * interrupt received on the 'irq' + * + ****************************************************************************/ + +#ifdef CONFIG_DEBUG +static int up_interrupte(int irq, void *context) +{ + struct uart_dev_s *dev = NULL; + struct up_dev_s *priv; + +#ifdef CONFIG_KINETIS_UART0 + if (g_uart0priv.irq == irqe) + { + dev = &g_uart0port; + } + else +#endif +#ifdef CONFIG_KINETIS_UART1 + if (g_uart1priv.irq == irqe) + { + dev = &g_uart1port; + } + else +#endif +#ifdef CONFIG_KINETIS_UART2 + if (g_uart2priv.irq == irqe) + { + dev = &g_uart2port; + } + else +#endif +#ifdef CONFIG_KINETIS_UART3 + if (g_uart3priv.irq == irqe) + { + dev = &g_uart1port; + } + else +#endif +#ifdef CONFIG_KINETIS_UART4 + if (g_uart4priv.irq == irqe) + { + dev = &g_uart1port; + } + else +#endif +#ifdef CONFIG_KINETIS_UART5 + if (g_uart5priv.irq == irqe) + { + dev = &g_uart1port; + } + else +#endif + { + PANIC(OSERR_INTERNAL); + } + priv = (struct up_dev_s*)dev->priv; + DEBUGASSERT(priv); + + /* Handle error interrupts. */ +#warning "Missing logic" + + /* Clear the pending error interrupt */ + + up_clrpend_irq(priv->irqe); // Necessary? + + return OK; +} +#endif + +/**************************************************************************** + * Name: up_interrupts + * + * Description: + * This is the UART status interrupt handler. It will be invoked when an + * interrupt received on the 'irq' It should call uart_transmitchars or + * uart_receivechar to perform the appropriate data transfers. The + * interrupt handling logic must be able to map the 'irq' number into the + * approprite uart_dev_s structure in order to call these functions. + * + ****************************************************************************/ + +static int up_interrupts(int irq, void *context) +{ + struct uart_dev_s *dev = NULL; + struct up_dev_s *priv; + int passes; + bool handled; + +#ifdef CONFIG_KINETIS_UART0 + if (g_uart0priv.irq == irqe) + { + dev = &g_uart0port; + } + else +#endif +#ifdef CONFIG_KINETIS_UART1 + if (g_uart1priv.irq == irqs) + { + dev = &g_uart1port; + } + else +#endif +#ifdef CONFIG_KINETIS_UART2 + if (g_uart2priv.irq == irqs) + { + dev = &g_uart2port; + } + else +#endif +#ifdef CONFIG_KINETIS_UART3 + if (g_uart3priv.irq == irqs) + { + dev = &g_uart1port; + } + else +#endif +#ifdef CONFIG_KINETIS_UART4 + if (g_uart4priv.irq == irqs) + { + dev = &g_uart1port; + } + else +#endif +#ifdef CONFIG_KINETIS_UART5 + if (g_uart5priv.irq == irqs) + { + dev = &g_uart1port; + } + else +#endif + { + PANIC(OSERR_INTERNAL); + } + priv = (struct up_dev_s*)dev->priv; + DEBUGASSERT(priv); + + /* Loop until there are no characters to be transferred or, + * until we have been looping for a long time. + */ + + handled = true; + for (passes = 0; passes < 256 && handled; passes++) + { + handled = false; + + /* Check for a pending status interrupt */ + + if (up_pending_irq(priv->irqs)) + { + /* Clear the pending status interrupt */ + + up_clrpend_irq(priv->irqs); // Necessary? + + /* Handle incoming, receive bytes */ + +#warning "Missing logic" + { + /* Process incoming bytes */ + + uart_recvchars(dev); + handled = true; + } + + /* Handle outgoing, transmit bytes */ +#warning "Missing logic" + { + /* Process outgoing bytes */ + + uart_xmitchars(dev); + handled = true; + } + } + } + + return OK; +} + +/**************************************************************************** + * Name: up_ioctl + * + * Description: + * All ioctl calls will be routed through this method + * + ****************************************************************************/ + +static int up_ioctl(struct file *filep, int cmd, unsigned long arg) +{ +#if 0 /* Reserved for future growth */ + struct inode *inode; + struct uart_dev_s *dev; + struct up_dev_s *priv; + int ret = OK; + + DEBUGASSERT(filep, filep->f_inode); + inode = filep->f_inode; + dev = inode->i_private; + + DEBUGASSERT(dev, dev->priv) + priv = (struct up_dev_s*)dev->priv; + + switch (cmd) + { + case xxx: /* Add commands here */ + break; + + default: + ret = -ENOTTY; + break; + } + + return ret; +#else + return -ENOTTY; +#endif +} + +/**************************************************************************** + * Name: up_receive + * + * Description: + * Called (usually) from the interrupt level to receive one + * character from the UART. Error bits associated with the + * receipt are provided in the return 'status'. + * + ****************************************************************************/ + +static int up_receive(struct uart_dev_s *dev, uint32_t *status) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + + /* Return status information */ + + if (status) + { + *status = 0; /* We are not yet tracking serial errors */ + } + + /* Then return the actual received byte */ + + return (int)up_serialin(priv, KINETIS_UART_D_OFFSET); +} + +/**************************************************************************** + * Name: up_rxint + * + * Description: + * Call to enable or disable RX interrupts + * + ****************************************************************************/ + +static void up_rxint(struct uart_dev_s *dev, bool enable) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + irqstate_t flags; + uint8_t im; + + flags = irqsave(); + im = priv->im; + if (enable) + { + /* Receive an interrupt when their is anything in the Rx data register (or an Rx + * timeout occurs). + */ + +#ifndef CONFIG_SUPPRESS_SERIAL_INTS +#ifdef CONFIG_DEBUG + up_enable_irq(priv->irqe); +#endif + up_enable_irq(priv->irqs); + ENABLE_RX(im); +#endif + } + else + { +#ifdef CONFIG_DEBUG + up_disable_irq(priv->irqe); +#endif + up_disable_irq(priv->irqs); + DISABLE_RX(im); + } + + priv->im = im; + irqrestore(flags); +} + +/**************************************************************************** + * Name: up_rxavailable + * + * Description: + * Return true if the receive register is not empty + * + ****************************************************************************/ + +static bool up_rxavailable(struct uart_dev_s *dev) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + + /* Return true if the receive data register is full */ + + return (up_serialin(priv, KINETIS_UART_S1_OFFSET) & UART_S1_RDRF) != 0; +} + +/**************************************************************************** + * Name: up_send + * + * Description: + * This method will send one byte on the UART. + * + ****************************************************************************/ + +static void up_send(struct uart_dev_s *dev, int ch) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + up_serialout(priv, KINETIS_UART_D_OFFSET, (uint8_t)ch); +} + +/**************************************************************************** + * Name: up_txint + * + * Description: + * Call to enable or disable TX interrupts + * + ****************************************************************************/ + +static void up_txint(struct uart_dev_s *dev, bool enable) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + irqstate_t flags; + uint8_t im; + + flags = irqsave(); + im = priv->im; + if (enable) + { + /* Enable the TX interrupt */ + +#ifndef CONFIG_SUPPRESS_SERIAL_INTS + ENABLE_TX(im); + + /* Fake a TX interrupt here by just calling uart_xmitchars() with + * interrupts disabled (note this may recurse). + */ + + uart_xmitchars(dev); +#endif + } + else + { + /* Disable the TX interrupt */ + + DISABLE_TX(im); + } + + priv->im = im; + irqrestore(flags); +} + +/**************************************************************************** + * Name: up_txready + * + * Description: + * Return true if the tranmsit data register is empty + * + ****************************************************************************/ + +static bool up_txready(struct uart_dev_s *dev) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + + /* Return true if the transmit data register is "empty." This state + * depends on the TX watermark setting and does not mean that the transmit + * buffer is really empty. + */ + + return (up_serialin(priv, KINETIS_UART_S1_OFFSET) & UART_S1_TDRE) != 0; +} + +/**************************************************************************** + * Name: up_txempty + * + * Description: + * Return true if the tranmsit data register is empty + * + ****************************************************************************/ + +static bool up_txempty(struct uart_dev_s *dev) +{ + struct up_dev_s *priv = (struct up_dev_s*)dev->priv; + + /* Return true if the transmit buffer/fifo is "empty." */ + + return (up_serialin(priv, KINETIS_UART_SFIFO_OFFSET) & UART_SFIFO_TXEMPT) != 0; +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_earlyserialinit + * + * Description: + * Performs the low level UART initialization early in debug so that the + * serial console will be available during bootup. This must be called + * before up_serialinit. NOTE: This function depends on GPIO pin + * configuration performed in up_consoleinit() and main clock iniialization + * performed in up_clkinitialize(). + * + ****************************************************************************/ + +void up_earlyserialinit(void) +{ + /* Disable interrupts from all UARTS. The console is enabled in + * pic32mx_consoleinit() + */ + + up_disableuartint(TTYS0_DEV.priv, NULL); +#ifdef TTYS1_DEV + up_disableuartint(TTYS1_DEV.priv, NULL); +#endif +#ifdef TTYS2_DEV + up_disableuartint(TTYS2_DEV.priv, NULL); +#endif +#ifdef TTYS3_DEV + up_disableuartint(TTYS3_DEV.priv, NULL); +#endif +#ifdef TTYS4_DEV + up_disableuartint(TTYS4_DEV.priv, NULL); +#endif +#ifdef TTYS5_DEV + up_disableuartint(TTYS5_DEV.priv, NULL); +#endif + + /* Configuration whichever one is the console */ + +#ifdef HAVE_SERIAL_CONSOLE + CONSOLE_DEV.isconsole = true; + up_setup(&CONSOLE_DEV); +#endif +} + +/**************************************************************************** + * Name: up_serialinit + * + * Description: + * Register serial console and serial ports. This assumes + * that up_earlyserialinit was called previously. + * + ****************************************************************************/ + +void up_serialinit(void) +{ + /* Register the console */ + +#ifdef HAVE_SERIAL_CONSOLE + (void)uart_register("/dev/console", &CONSOLE_DEV); +#endif + + /* Register all UARTs */ + + (void)uart_register("/dev/ttyS0", &TTYS0_DEV); +#ifdef TTYS1_DEV + (void)uart_register("/dev/ttyS1", &TTYS1_DEV); +#endif +#ifdef TTYS2_DEV + (void)uart_register("/dev/ttyS2", &TTYS2_DEV); +#endif +#ifdef TTYS3_DEV + (void)uart_register("/dev/ttyS3", &TTYS3_DEV); +#endif +#ifdef TTYS4_DEV + (void)uart_register("/dev/ttyS4", &TTYS4_DEV); +#endif +#ifdef TTYS5_DEV + (void)uart_register("/dev/ttyS5", &TTYS5_DEV); +#endif +} + +/**************************************************************************** + * Name: up_putc + * + * Description: + * Provide priority, low-level access to support OS debug writes + * + ****************************************************************************/ + +int up_putc(int ch) +{ +#ifdef HAVE_SERIAL_CONSOLE + struct up_dev_s *priv = (struct up_dev_s*)CONSOLE_DEV.priv; + uint8_t imr; + + up_disableuartint(priv, &imr); + + /* Check for LF */ + + if (ch == '\n') + { + /* Add CR */ + + up_lowputc('\r'); + } + + up_lowputc(ch); + up_restoreuartint(priv, imr); +#endif + return ch; +} + +#else /* CONFIG_USE_SERIALDRIVER */ + +/**************************************************************************** + * Name: up_putc + * + * Description: + * Provide priority, low-level access to support OS debug writes + * + ****************************************************************************/ + +int up_putc(int ch) +{ +#ifdef HAVE_SERIAL_CONSOLE + /* Check for LF */ + + if (ch == '\n') + { + /* Add CR */ + + up_lowputc('\r'); + } + + up_lowputc(ch); +#endif + return ch; +} + +#endif /* CONFIG_USE_SERIALDRIVER */ + |