diff options
Diffstat (limited to 'nuttx/arch/arm/src/lpc17xx/lpc17_internal.h')
-rw-r--r-- | nuttx/arch/arm/src/lpc17xx/lpc17_internal.h | 854 |
1 files changed, 0 insertions, 854 deletions
diff --git a/nuttx/arch/arm/src/lpc17xx/lpc17_internal.h b/nuttx/arch/arm/src/lpc17xx/lpc17_internal.h deleted file mode 100644 index 8b4358196..000000000 --- a/nuttx/arch/arm/src/lpc17xx/lpc17_internal.h +++ /dev/null @@ -1,854 +0,0 @@ -/************************************************************************************ - * arch/arm/src/lpc17xx/lpc17_internal.h - * - * Copyright (C) 2009-2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -#ifndef __ARCH_ARM_SRC_LPC17XX_LPC17_INTERNAL_H -#define __ARCH_ARM_SRC_LPC17XX_LPC17_INTERNAL_H - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include <nuttx/config.h> -#include <nuttx/compiler.h> - -#include <sys/types.h> -#include <stdint.h> -#include <stdbool.h> - -#if defined(CONFIG_LPC17_SPI) || defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1) -# include <nuttx/spi.h> -#endif - -#include "up_internal.h" -#include "chip.h" - -/************************************************************************************ - * Definitions - ************************************************************************************/ - -/* Configuration ********************************************************************/ - -/* Bit-encoded input to lpc17_configgpio() ******************************************/ - -/* Encoding: FFFx MMOV PPPN NNNN - * - * Pin Function: FFF - * Pin Mode bits: MM - * Open drain: O (output pins) - * Initial value: V (output pins) - * Port number: PPP (0-4) - * Pin number: NNNNN (0-31) - */ - -/* Pin Function bits: FFF - * Only meaningful when the GPIO function is GPIO_PIN - */ - -#define GPIO_FUNC_SHIFT (13) /* Bits 13-15: GPIO mode */ -#define GPIO_FUNC_MASK (7 << GPIO_FUNC_SHIFT) -# define GPIO_INPUT (0 << GPIO_FUNC_SHIFT) /* 000 GPIO input pin */ -# define GPIO_INTFE (1 << GPIO_FUNC_SHIFT) /* 001 GPIO interrupt falling edge */ -# define GPIO_INTRE (2 << GPIO_FUNC_SHIFT) /* 010 GPIO interrupt rising edge */ -# define GPIO_INTBOTH (3 << GPIO_FUNC_SHIFT) /* 011 GPIO interrupt both edges */ -# define GPIO_OUTPUT (4 << GPIO_FUNC_SHIFT) /* 100 GPIO outpout pin */ -# define GPIO_ALT1 (5 << GPIO_FUNC_SHIFT) /* 101 Alternate function 1 */ -# define GPIO_ALT2 (6 << GPIO_FUNC_SHIFT) /* 110 Alternate function 2 */ -# define GPIO_ALT3 (7 << GPIO_FUNC_SHIFT) /* 111 Alternate function 3 */ - -#define GPIO_EDGE_SHIFT (13) /* Bits 13-14: Interrupt edge bits */ -#define GPIO_EDGE_MASK (3 << GPIO_EDGE_SHIFT) - -#define GPIO_INOUT_MASK GPIO_OUTPUT -#define GPIO_FE_MASK GPIO_INTFE -#define GPIO_RE_MASK GPIO_INTRE - -#define GPIO_ISGPIO(ps) ((uint16_t(ps) & GPIO_FUNC_MASK) <= GPIO_OUTPUT) -#define GPIO_ISALT(ps) ((uint16_t(ps) & GPIO_FUNC_MASK) > GPIO_OUTPUT) -#define GPIO_ISINPUT(ps) (((ps) & GPIO_FUNC_MASK) == GPIO_INPUT) -#define GPIO_ISOUTPUT(ps) (((ps) & GPIO_FUNC_MASK) == GPIO_OUTPUT) -#define GPIO_ISINORINT(ps) (((ps) & GPIO_INOUT_MASK) == 0) -#define GPIO_ISOUTORALT(ps) (((ps) & GPIO_INOUT_MASK) != 0) -#define GPIO_ISINTERRUPT(ps) (GPIO_ISOUTPUT(ps) && !GPIO_ISINPUT(ps)) -#define GPIO_ISFE(ps) (((ps) & GPIO_FE_MASK) != 0) -#define GPIO_ISRE(ps) (((ps) & GPIO_RE_MASK) != 0) - -/* Pin Mode: MM */ - -#define GPIO_PUMODE_SHIFT (10) /* Bits 10-11: Pin pull-up mode */ -#define GPIO_PUMODE_MASK (3 << GPIO_PUMODE_SHIFT) -# define GPIO_PULLUP (0 << GPIO_PUMODE_SHIFT) /* Pull-up resistor enabled */ -# define GPIO_REPEATER (1 << GPIO_PUMODE_SHIFT) /* Repeater mode enabled */ -# define GPIO_FLOAT (2 << GPIO_PUMODE_SHIFT) /* Neither pull-up nor -down */ -# define GPIO_PULLDN (3 << GPIO_PUMODE_SHIFT) /* Pull-down resistor enabled */ - -/* Open drain: O */ - -#define GPIO_OPEN_DRAIN (1 << 9) /* Bit 9: Open drain mode */ - -/* Initial value: V */ - -#define GPIO_VALUE (1 << 8) /* Bit 8: Initial GPIO output value */ -#define GPIO_VALUE_ONE GPIO_VALUE -#define GPIO_VALUE_ZERO (0) - -/* Port number: PPP (0-4) */ - -#define GPIO_PORT_SHIFT (5) /* Bit 5-7: Port number */ -#define GPIO_PORT_MASK (7 << GPIO_PORT_SHIFT) -# define GPIO_PORT0 (0 << GPIO_PORT_SHIFT) -# define GPIO_PORT1 (1 << GPIO_PORT_SHIFT) -# define GPIO_PORT2 (2 << GPIO_PORT_SHIFT) -# define GPIO_PORT3 (3 << GPIO_PORT_SHIFT) -# define GPIO_PORT4 (4 << GPIO_PORT_SHIFT) - -#define GPIO_NPORTS 5 - -/* Pin number: NNNNN (0-31) */ - -#define GPIO_PIN_SHIFT 0 /* Bits 0-4: GPIO number: 0-31 */ -#define GPIO_PIN_MASK (31 << GPIO_PIN_SHIFT) -#define GPIO_PIN0 (0 << GPIO_PIN_SHIFT) -#define GPIO_PIN1 (1 << GPIO_PIN_SHIFT) -#define GPIO_PIN2 (2 << GPIO_PIN_SHIFT) -#define GPIO_PIN3 (3 << GPIO_PIN_SHIFT) -#define GPIO_PIN4 (4 << GPIO_PIN_SHIFT) -#define GPIO_PIN5 (5 << GPIO_PIN_SHIFT) -#define GPIO_PIN6 (6 << GPIO_PIN_SHIFT) -#define GPIO_PIN7 (7 << GPIO_PIN_SHIFT) -#define GPIO_PIN8 (8 << GPIO_PIN_SHIFT) -#define GPIO_PIN9 (9 << GPIO_PIN_SHIFT) -#define GPIO_PIN10 (10 << GPIO_PIN_SHIFT) -#define GPIO_PIN11 (11 << GPIO_PIN_SHIFT) -#define GPIO_PIN12 (12 << GPIO_PIN_SHIFT) -#define GPIO_PIN13 (13 << GPIO_PIN_SHIFT) -#define GPIO_PIN14 (14 << GPIO_PIN_SHIFT) -#define GPIO_PIN15 (15 << GPIO_PIN_SHIFT) -#define GPIO_PIN16 (16 << GPIO_PIN_SHIFT) -#define GPIO_PIN17 (17 << GPIO_PIN_SHIFT) -#define GPIO_PIN18 (18 << GPIO_PIN_SHIFT) -#define GPIO_PIN19 (19 << GPIO_PIN_SHIFT) -#define GPIO_PIN20 (20 << GPIO_PIN_SHIFT) -#define GPIO_PIN21 (21 << GPIO_PIN_SHIFT) -#define GPIO_PIN22 (22 << GPIO_PIN_SHIFT) -#define GPIO_PIN23 (23 << GPIO_PIN_SHIFT) -#define GPIO_PIN24 (24 << GPIO_PIN_SHIFT) -#define GPIO_PIN25 (25 << GPIO_PIN_SHIFT) -#define GPIO_PIN26 (26 << GPIO_PIN_SHIFT) -#define GPIO_PIN27 (27 << GPIO_PIN_SHIFT) -#define GPIO_PIN28 (28 << GPIO_PIN_SHIFT) -#define GPIO_PIN29 (29 << GPIO_PIN_SHIFT) -#define GPIO_PIN30 (30 << GPIO_PIN_SHIFT) -#define GPIO_PIN31 (31 << GPIO_PIN_SHIFT) - -/* GPIO pin definitions *************************************************************/ -/* NOTE that functions have a alternate pins that can be selected. These alternates - * are identified with a numerica suffix like _1, _2, or _3. Your board.h file - * should select the correct alternative for your board by including definitions - * such as: - * - * #define GPIO_UART1_RXD GPIO_UART1_RXD_1 - * - * (without the suffix) - */ - -#define GPIO_CAN1_RD_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN0) -#define GPIO_UART3_TXD_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN0) -#define GPIO_I2C1_SDA_1 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN0) -#define GPIO_CAN1_TD_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN1) -#define GPIO_UART3_RXD_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN1) -#define GPIO_I2C1_SCL_1 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN1) -#define GPIO_UART0_TXD (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN2) -#define GPIO_AD0p7 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN2) -#define GPIO_UART0_RXD (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN3) -#define GPIO_AD0p6 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN3) -#define GPIO_I2S_RXCLK_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN4) -#define GPIO_CAN2_RD (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN4) -#define GPIO_CAP2p0 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN4) -#define GPIO_I2S_RXWS_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN5) -#define GPIO_CAN2_TD (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN5) -#define GPIO_CAP2p1 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN5) -#define GPIO_I2S_RXSDA_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN6) -#define GPIO_SSP1_SSEL (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN6) -#define GPIO_MAT2p0_1 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN6) -#define GPIO_I2S_TXCLK_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN7) -#define GPIO_SSP1_SCK_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN7) -#define GPIO_MAT2p1_1 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN7) -#define GPIO_I2S_TXWS_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN8) -#define GPIO_SSP1_MISO (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN8) -#define GPIO_MAT2p2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN8) -#define GPIO_I2S_TXSDA_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN9) -#define GPIO_SSP1_MOSI (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN9) -#define GPIO_MAT2p3 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN9) -#define GPIO_UART2_TXD_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN10) -#define GPIO_I2C2_SDA (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN10) -#define GPIO_MAT3p0 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN10) -#define GPIO_UART2_RXD_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN11) -#define GPIO_I2C2_SCL (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN11) -#define GPIO_MAT3p1 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN11) -#define GPIO_UART1_TXD_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN15) -#define GPIO_SSP0_SCK_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN15) -#define GPIO_SPI_SCK (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN15) -#define GPIO_UART1_RXD_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN16) -#define GPIO_SSP0_SSEL_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN16) -#define GPIO_SPI_SSEL (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN16) -#define GPIO_UART1_CTS_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN17) -#define GPIO_SSP0_MISO_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN17) -#define GPIO_SPI_MISO (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN17) -#define GPIO_UART1_DCD_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN18) -#define GPIO_SSP0_MOSI_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN18) -#define GPIO_SPI_MOSI (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN18) -#define GPIO_UART1_DSR_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN19) -#define GPIO_I2C1_SDA_2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN19) -#define GPIO_UART1_DTR_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN20) -#define GPIO_I2C1_SCL_2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN20) -#define GPIO_UART1_RI_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN21) -#define GPIO_CAN1_RD_2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN21) -#define GPIO_UART1_RTS_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN22) -#define GPIO_CAN1_TD_2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN22) -#define GPIO_AD0p0 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN23) -#define GPIO_I2S_RXCLK_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN23) -#define GPIO_CAP3p0 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN23) -#define GPIO_AD0p1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN24) -#define GPIO_I2S_RXWS_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN24) -#define GPIO_CAP3p1 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN24) -#define GPIO_AD0p2 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN25) -#define GPIO_I2S_RXSDA_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN25) -#define GPIO_UART3_TXD_2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN25) -#define GPIO_AD0p3 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN26) -#define GPIO_AOUT (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN26) -#define GPIO_UART3_RXD_2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN26) -#define GPIO_I2C0_SDA (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN27) -#define GPIO_USB_SDA (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN27) -#define GPIO_I2C0_SCL (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN28) -#define GPIO_USB_SCL (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN28) -#define GPIO_USB_DP (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN29) -#define GPIO_USB_DM (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN30) -#define GPIO_ENET_TXD0 (GPIO_ALT1 | GPIO_FLOAT | GPIO_PORT1 | GPIO_PIN0) -#define GPIO_ENET_TXD1 (GPIO_ALT1 | GPIO_FLOAT | GPIO_PORT1 | GPIO_PIN1) -#define GPIO_ENET_TXEN (GPIO_ALT1 | GPIO_FLOAT | GPIO_PORT1 | GPIO_PIN4) -#define GPIO_ENET_CRS (GPIO_ALT1 | GPIO_FLOAT | GPIO_PORT1 | GPIO_PIN8) -#define GPIO_ENET_RXD0 (GPIO_ALT1 | GPIO_FLOAT | GPIO_PORT1 | GPIO_PIN9) -#define GPIO_ENET_RXD1 (GPIO_ALT1 | GPIO_FLOAT | GPIO_PORT1 | GPIO_PIN10) -#define GPIO_ENET_RXER (GPIO_ALT1 | GPIO_FLOAT | GPIO_PORT1 | GPIO_PIN14) -#define GPIO_ENET_REFCLK (GPIO_ALT1 | GPIO_FLOAT | GPIO_PORT1 | GPIO_PIN15) -#define GPIO_ENET_MDC_1 (GPIO_ALT1 | GPIO_FLOAT | GPIO_PORT1 | GPIO_PIN16) -#define GPIO_ENET_MDIO_1 (GPIO_ALT1 | GPIO_FLOAT | GPIO_PORT1 | GPIO_PIN17) -#define GPIO_USB_UPLED (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN18) -#define GPIO_PWM1p1_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN18) -#define GPIO_CAP1p0 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN18) -#define GPIO_MCPWM_MCOA0 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN19) -#define GPIO_USB_PPWR (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN19) -#define GPIO_CAP1p1 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN19) -#define GPIO_MCPWM_MCI0 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN20) -#define GPIO_PWM1p2_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN20) -#define GPIO_SSP0_SCK_2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN20) -#define GPIO_MCPWM_MCABORT (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN21) -#define GPIO_PWM1p3_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN21) -#define GPIO_SSP0_SSEL_2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN21) -#define GPIO_MCPWM_MCOB0 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN22) -#define GPIO_USB_PWRD (GPIO_ALT2 | GPIO_PULLDN | GPIO_PORT1 | GPIO_PIN22) -#define GPIO_MAT1p0 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN22) -#define GPIO_MCPWM_MCI1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN23) -#define GPIO_PWM1p4_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN23) -#define GPIO_SSP0_MISO_2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN23) -#define GPIO_MCPWM_MCI2 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN24) -#define GPIO_PWM1p5_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN24) -#define GPIO_SSP0_MOSI_2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN24) -#define GPIO_MCPWM_MCOA1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN25) -#define GPIO_MAT1p1 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN25) -#define GPIO_MCPWM_MCOB1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN26) -#define GPIO_PWM1p6_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN26) -#define GPIO_CAP0p0 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN26) -#define GPIO_CLKOUT (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN27) -#define GPIO_USB_OVRCR (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN27) -#define GPIO_CAP0p1 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN27) -#define GPIO_MCPWM_MCOA2 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN28) -#define GPIO_PCAP1p0_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN28) -#define GPIO_MAT0p0_1 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN28) -#define GPIO_MCPWM_MCOB2 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN29) -#define GPIO_PCAP1p1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN29) -#define GPIO_MAT0p1_1 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN29) -#define GPIO_USB_VBUS (GPIO_ALT2 | GPIO_FLOAT | GPIO_PORT1 | GPIO_PIN30) -#define GPIO_AD0p4 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN30) -#define GPIO_SSP1_SCK_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN31) -#define GPIO_AD0p5 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN31) -#define GPIO_PWM1p1_2 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN0) -#define GPIO_UART1_TXD_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN0) -#define GPIO_PWM1p2_2 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN1) -#define GPIO_UART1_RXD_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN1) -#define GPIO_PWM1p3_2 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN2) -#define GPIO_UART1_CTS_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN2) -#define GPIO_PWM1p4_2 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN3) -#define GPIO_UART1_DCD_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN3) -#define GPIO_PWM1p5_2 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN4) -#define GPIO_UART1_DSR_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN4) -#define GPIO_PWM1p6_2 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN5) -#define GPIO_UART1_DTR_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN5) -#define GPIO_PCAP1p0_2 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN6) -#define GPIO_UART1_RI_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN6) -#define GPIO_CAN2_RD_2 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN7) -#define GPIO_UART1_RTS_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN7) -#define GPIO_CAN2_TD_2 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN8) -#define GPIO_UART2_TXD_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN8) -#define GPIO_ENET_MDC_2 (GPIO_ALT3 | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN8) -#define GPIO_USB_CONNECT (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN9) -#define GPIO_UART2_RXD_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN9) -#define GPIO_ENET_MDIO_2 (GPIO_ALT3 | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN9) -#define GPIO_EINT0 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN10) -#define GPIO_NMI (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN10) -#define GPIO_EINT1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN11) -#define GPIO_I2S_TXCLK_2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN11) -#define GPIO_PEINT2 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN12) -#define GPIO_I2S_TXWS_2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN12) -#define GPIO_EINT3 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN13) -#define GPIO_I2S_TXSDA_2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN13) -#define GPIO_MAT0p0_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT3 | GPIO_PIN25) -#define GPIO_PWM1p2_3 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT3 | GPIO_PIN25) -#define GPIO_STCLK (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT3 | GPIO_PIN26) -#define GPIO_MAT0p1_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT3 | GPIO_PIN26) -#define GPIO_PWM1p3_3 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT3 | GPIO_PIN26) -#define GPIO_RXMCLK (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT4 | GPIO_PIN28) -#define GPIO_MAT2p0_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT4 | GPIO_PIN28) -#define GPIO_UART3_TXD_3 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT4 | GPIO_PIN28) -#define GPIO_TXMCLK (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT4 | GPIO_PIN29) -#define GPIO_MAT2p1_2 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT4 | GPIO_PIN29) -#define GPIO_UART3_RXD_3 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT4 | GPIO_PIN29) - -/************************************************************************************ - * Public Types - ************************************************************************************/ - -typedef FAR void *DMA_HANDLE; -typedef void (*dma_callback_t)(DMA_HANDLE handle, void *arg, int result); - -/* The following is used for sampling DMA registers when CONFIG DEBUG_DMA is selected */ - -#ifdef CONFIG_DEBUG_DMA -struct lpc17_dmaglobalregs_s -{ - /* Global Registers */ - - uint32_t intst; /* DMA Interrupt Status Register */ - uint32_t inttcst; /* DMA Interrupt Terminal Count Request Status Register */ - uint32_t interrst; /* DMA Interrupt Error Status Register */ - uint32_t rawinttcst; /* DMA Raw Interrupt Terminal Count Status Register */ - uint32_t rawinterrst; /* DMA Raw Error Interrupt Status Register */ - uint32_t enbldchns; /* DMA Enabled Channel Register */ - uint32_t softbreq; /* DMA Software Burst Request Register */ - uint32_t softsreq; /* DMA Software Single Request Register */ - uint32_t softlbreq; /* DMA Software Last Burst Request Register */ - uint32_t softlsreq; /* DMA Software Last Single Request Register */ - uint32_t config; /* DMA Configuration Register */ - uint32_t sync; /* DMA Synchronization Register */ -}; - -struct lpc17_dmachanregs_s -{ - /* Channel Registers */ - - uint32_t srcaddr; /* DMA Channel Source Address Register */ - uint32_t destaddr; /* DMA Channel Destination Address Register */ - uint32_t lli; /* DMA Channel Linked List Item Register */ - uint32_t control; /* DMA Channel Control Register */ - uint32_t config; /* DMA Channel Configuration Register */ -}; - -struct lpc17_dmaregs_s -{ - /* Global Registers */ - - struct lpc17_dmaglobalregs_s gbl; - - /* Channel Registers */ - - struct lpc17_dmachanregs_s ch; -}; -#endif - -/************************************************************************************ - * Inline Functions - ************************************************************************************/ - -#ifndef __ASSEMBLY__ - -/************************************************************************************ - * Public Data - ************************************************************************************/ - -#undef EXTERN -#if defined(__cplusplus) -#define EXTERN extern "C" -extern "C" { -#else -#define EXTERN extern -#endif - -/* These tables have global scope only because they are shared between lpc17_gpio.c, - * lpc17_gpioint.c, and lpc17_gpiodbg.c - */ - -#ifdef CONFIG_GPIO_IRQ -EXTERN uint64_t g_intedge0; -EXTERN uint64_t g_intedge2; -#endif - -EXTERN const uint32_t g_fiobase[GPIO_NPORTS]; -EXTERN const uint32_t g_intbase[GPIO_NPORTS]; -EXTERN const uint32_t g_lopinsel[GPIO_NPORTS]; -EXTERN const uint32_t g_hipinsel[GPIO_NPORTS]; -EXTERN const uint32_t g_lopinmode[GPIO_NPORTS]; -EXTERN const uint32_t g_hipinmode[GPIO_NPORTS]; -EXTERN const uint32_t g_odmode[GPIO_NPORTS]; - -/************************************************************************************ - * Public Function Prototypes - ************************************************************************************/ - -/************************************************************************************ - * Name: lpc17_clockconfig - * - * Description: - * Called to initialize the LPC17XX. This does whatever setup is needed to put the - * MCU in a usable state. This includes the initialization of clocking using the - * settings in board.h. - * - ************************************************************************************/ - -EXTERN void lpc17_clockconfig(void); - -/************************************************************************************ - * Name: lpc17_lowsetup - * - * Description: - * Called at the very beginning of _start. Performs low level initialization - * including setup of the console UART. This UART done early so that the serial - * console is available for debugging very early in the boot sequence. - * - ************************************************************************************/ - -EXTERN void lpc17_lowsetup(void); - -/************************************************************************************ - * Name: lpc17_gpioirqinitialize - * - * Description: - * Initialize logic to support a second level of interrupt decoding for GPIO pins. - * - ************************************************************************************/ - -#ifdef CONFIG_GPIO_IRQ -EXTERN void lpc17_gpioirqinitialize(void); -#else -# define lpc17_gpioirqinitialize() -#endif - -/************************************************************************************ - * Name: lpc17_configgpio - * - * Description: - * Configure a GPIO pin based on bit-encoded description of the pin. - * - ************************************************************************************/ - -EXTERN int lpc17_configgpio(uint16_t cfgset); - -/************************************************************************************ - * Name: lpc17_gpiowrite - * - * Description: - * Write one or zero to the selected GPIO pin - * - ************************************************************************************/ - -EXTERN void lpc17_gpiowrite(uint16_t pinset, bool value); - -/************************************************************************************ - * Name: lpc17_gpioread - * - * Description: - * Read one or zero from the selected GPIO pin - * - ************************************************************************************/ - -EXTERN bool lpc17_gpioread(uint16_t pinset); - -/************************************************************************************ - * Name: lpc17_gpioirqenable - * - * Description: - * Enable the interrupt for specified GPIO IRQ - * - ************************************************************************************/ - -#ifdef CONFIG_GPIO_IRQ -EXTERN void lpc17_gpioirqenable(int irq); -#else -# define lpc17_gpioirqenable(irq) -#endif - -/************************************************************************************ - * Name: lpc17_gpioirqdisable - * - * Description: - * Disable the interrupt for specified GPIO IRQ - * - ************************************************************************************/ - -#ifdef CONFIG_GPIO_IRQ -EXTERN void lpc17_gpioirqdisable(int irq); -#else -# define lpc17_gpioirqdisable(irq) -#endif - -/************************************************************************************ - * Function: lpc17_dumpgpio - * - * Description: - * Dump all GPIO registers associated with the base address of the provided pinset. - * - ************************************************************************************/ - -#ifdef CONFIG_DEBUG_GPIO -EXTERN int lpc17_dumpgpio(uint16_t pinset, const char *msg); -#else -# define lpc17_dumpgpio(p,m) -#endif - -/************************************************************************************ - * Name: lpc17_clrpend - * - * Description: - * Clear a pending interrupt at the NVIC. This does not seem to be required - * for most interrupts. Don't know why... but the LPC1766 Ethernet EMAC - * interrupt definitely needs it! - * - ************************************************************************************/ - -EXTERN void lpc17_clrpend(int irq); - -/************************************************************************************ - * Name: lpc17_spi/ssp0/ssp1select, lpc17_spi/ssp0/ssp1status, and - * lpc17_spi/ssp0/ssp1cmddata - * - * Description: - * These external functions must be provided by board-specific logic. They are - * implementations of the select, status, and cmddata methods of the SPI interface - * defined by struct spi_ops_s (see include/nuttx/spi.h). All other methods - * including up_spiinitialize()) are provided by common LPC17xx logic. To use - * this common SPI logic on your board: - * - * 1. Provide logic in lpc17_boardinitialize() to configure SPI/SSP chip select - * pins. - * 2. Provide lpc17_spi/ssp0/ssp1select() and lpc17_spi/ssp0/ssp1status() functions - * in your board-specific logic. These functions will perform chip selection - * and status operations using GPIOs in the way your board is configured. - * 2. If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, provide - * lpc17_spi/ssp0/ssp1cmddata() functions in your board-specific logic. These - * functions will perform cmd/data selection operations using GPIOs in the way - * your board is configured. - * 3. Add a call to up_spiinitialize() in your low level application - * initialization logic - * 4. The handle returned by up_spiinitialize() may then be used to bind the - * SPI driver to higher level logic (e.g., calling - * mmcsd_spislotinitialize(), for example, will bind the SPI driver to - * the SPI MMC/SD driver). - * - ************************************************************************************/ - -#ifdef CONFIG_LPC17_SPI -EXTERN void lpc17_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected); -EXTERN uint8_t lpc17_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid); -#ifdef CONFIG_SPI_CMDDATA -EXTERN int lpc17_spicmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd); -#endif -#endif - -#ifdef CONFIG_LPC17_SSP0 -EXTERN void lpc17_ssp0select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected); -EXTERN uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, enum spi_dev_e devid); -#ifdef CONFIG_SPI_CMDDATA -EXTERN int lpc17_ssp0cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd); -#endif -#endif - -#ifdef CONFIG_LPC17_SSP1 -EXTERN void lpc17_ssp1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected); -EXTERN uint8_t lpc17_ssp1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid); -#ifdef CONFIG_SPI_CMDDATA -EXTERN int lpc17_ssp1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd); -#endif -#endif - -/**************************************************************************** - * Name: spi_flush - * - * Description: - * Flush and discard any words left in the RX fifo. This can be called - * from ssp0/1select after a device is deselected (if you worry about such - * things). - * - * Input Parameters: - * dev - Device-specific state data - * - * Returned Value: - * None - * - ****************************************************************************/ - -#ifdef CONFIG_LPC17_SPI -EXTERN void spi_flush(FAR struct spi_dev_s *dev); -#endif - -#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1) -EXTERN void ssp_flush(FAR struct spi_dev_s *dev); -#endif - -/**************************************************************************** - * Name: lpc17_spi/ssp0/1register - * - * Description: - * If the board supports a card detect callback to inform the SPI-based - * MMC/SD drvier when an SD card is inserted or removed, then - * CONFIG_SPI_CALLBACK should be defined and the following function(s) must - * must be implemented. These functiosn implements the registercallback - * method of the SPI interface (see include/nuttx/spi.h for details) - * - * Input Parameters: - * dev - Device-specific state data - * callback - The funtion to call on the media change - * arg - A caller provided value to return with the callback - * - * Returned Value: - * 0 on success; negated errno on failure. - * - ****************************************************************************/ - -#ifdef CONFIG_SPI_CALLBACK -#ifdef CONFIG_LPC17_SPI -EXTERN int lpc17_spiregister(FAR struct spi_dev_s *dev, - spi_mediachange_t callback, void *arg); -#endif - -#ifdef CONFIG_LPC17_SSP0 -EXTERN int lpc17_ssp0register(FAR struct spi_dev_s *dev, - spi_mediachange_t callback, void *arg); -#endif - -#ifdef CONFIG_LPC17_SSP1 -EXTERN int lpc17_ssp1register(FAR struct spi_dev_s *dev, - spi_mediachange_t callback, void *arg); -#endif -#endif - -/**************************************************************************** - * Name: lpc17_dmainitialize - * - * Description: - * Initialize the GPDMA subsystem. - * - * Returned Value: - * None - * - ****************************************************************************/ - -#ifdef CONFIG_LPC17_GPDMA -EXTERN void lpc17_dmainitilaize(void); -#endif - -/**************************************************************************** - * Name: lpc17_dmachannel - * - * Description: - * Allocate a DMA channel. This function sets aside a DMA channel and - * gives the caller exclusive access to the DMA channel. - * - * Returned Value: - * One success, this function returns a non-NULL, void* DMA channel - * handle. NULL is returned on any failure. This function can fail only - * if no DMA channel is available. - * - ****************************************************************************/ - -#ifdef CONFIG_LPC17_GPDMA -EXTERN DMA_HANDLE lpc17_dmachannel(void); -#endif - -/**************************************************************************** - * Name: lpc17_dmafree - * - * Description: - * Release a DMA channel. NOTE: The 'handle' used in this argument must - * NEVER be used again until lpc17_dmachannel() is called again to re-gain - * a valid handle. - * - * Returned Value: - * None - * - ****************************************************************************/ - -#ifdef CONFIG_LPC17_GPDMA -EXTERN void lpc17_dmafree(DMA_HANDLE handle); -#endif - -/**************************************************************************** - * Name: lpc17_dmasetup - * - * Description: - * Configure DMA for one transfer. - * - ****************************************************************************/ - -#ifdef CONFIG_LPC17_GPDMA -EXTERN int lpc17_dmarxsetup(DMA_HANDLE handle, - uint32_t control, uint32_t config, - uint32_t srcaddr, uint32_t destaddr, - size_t nbytes); -#endif - -/**************************************************************************** - * Name: lpc17_dmastart - * - * Description: - * Start the DMA transfer - * - ****************************************************************************/ - -#ifdef CONFIG_LPC17_GPDMA -EXTERN int lpc17_dmastart(DMA_HANDLE handle, dma_callback_t callback, void *arg); -#endif - -/**************************************************************************** - * Name: lpc17_dmastop - * - * Description: - * Cancel the DMA. After lpc17_dmastop() is called, the DMA channel is - * reset and lpc17_dmasetup() must be called before lpc17_dmastart() can be - * called again - * - ****************************************************************************/ - -#ifdef CONFIG_LPC17_GPDMA -EXTERN void lpc17_dmastop(DMA_HANDLE handle); -#endif - -/**************************************************************************** - * Name: lpc17_dmasample - * - * Description: - * Sample DMA register contents - * - ****************************************************************************/ - -#ifdef CONFIG_LPC17_GPDMA -#ifdef CONFIG_DEBUG_DMA -EXTERN void lpc17_dmasample(DMA_HANDLE handle, struct lpc17_dmaregs_s *regs); -#else -# define lpc17_dmasample(handle,regs) -#endif -#endif - -/**************************************************************************** - * Name: lpc17_dmadump - * - * Description: - * Dump previously sampled DMA register contents - * - ****************************************************************************/ - -#ifdef CONFIG_LPC17_GPDMA -#ifdef CONFIG_DEBUG_DMA -EXTERN void lpc17_dmadump(DMA_HANDLE handle, const struct lpc17_dmaregs_s *regs, - const char *msg); -#else -# define lpc17_dmadump(handle,regs,msg) -#endif -#endif - -/**************************************************************************** - * Name: lpc17_adcinitialize - * - * Description: - * Initialize the adc - * - * Returned Value: - * Valid can device structure reference on succcess; a NULL on failure - * - ****************************************************************************/ - -#ifdef CONFIG_LPC17_ADC -FAR struct adc_dev_s *lpc17_adcinitialize(void); -#endif - -/**************************************************************************** - * Name: lpc17_dacinitialize - * - * Description: - * Initialize the DAC - * - * Returned Value: - * Valid dac device structure reference on succcess; a NULL on failure - * - ****************************************************************************/ - -#ifdef CONFIG_LPC17_DAC -EXTERN FAR struct dac_dev_s *lpc17_dacinitialize(void); -#endif - -/**************************************************************************** - * Name: lpc17_caninitialize - * - * Description: - * Initialize the selected can port - * - * Input Parameter: - * Port number (for hardware that has mutiple can interfaces) - * - * Returned Value: - * Valid can device structure reference on succcess; a NULL on failure - * - ****************************************************************************/ - -#if defined(CONFIG_CAN) && (defined(CONFIG_LPC17_CAN1) || defined(CONFIG_LPC17_CAN2)) -struct can_dev_s; -EXTERN FAR struct can_dev_s *lpc17_caninitialize(int port); -#endif - -#undef EXTERN -#if defined(__cplusplus) -} -#endif - -#endif /* __ASSEMBLY__ */ -#endif /* __ARCH_ARM_SRC_LPC17XX_LPC17_INTERNAL_H */ |