diff options
Diffstat (limited to 'nuttx/arch/arm')
-rw-r--r-- | nuttx/arch/arm/src/kl/Kconfig | 3 | ||||
-rw-r--r-- | nuttx/arch/arm/src/kl/chip/kl_clk.h | 288 | ||||
-rw-r--r-- | nuttx/arch/arm/src/kl/kl_start.c | 4 | ||||
-rw-r--r-- | nuttx/arch/arm/src/kl/kl_timerisr.c | 100 | ||||
-rw-r--r-- | nuttx/arch/arm/src/nuc1xx/nuc_start.c | 4 |
5 files changed, 17 insertions, 382 deletions
diff --git a/nuttx/arch/arm/src/kl/Kconfig b/nuttx/arch/arm/src/kl/Kconfig index 7f1910963..3da807cf0 100644 --- a/nuttx/arch/arm/src/kl/Kconfig +++ b/nuttx/arch/arm/src/kl/Kconfig @@ -296,6 +296,9 @@ choice config KL_SYSTICK_CORECLK bool "Cortex-M0 core clock" +config KL_SYSTICK_CORECLK_DIV16 + bool "Cortex-M0 core clock divided by 16" + endchoice comment "Kinetis GPIO Interrupt Configuration" diff --git a/nuttx/arch/arm/src/kl/chip/kl_clk.h b/nuttx/arch/arm/src/kl/chip/kl_clk.h deleted file mode 100644 index 2125d4dea..000000000 --- a/nuttx/arch/arm/src/kl/chip/kl_clk.h +++ /dev/null @@ -1,288 +0,0 @@ -/******************************************************************************************** - * arch/arm/src/nuc1xx/chip/nuc_clk.h - * - * Copyright (C) 2013 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ********************************************************************************************/ - -#ifndef __ARCH_ARM_SRC_KL_CHIP_KL_CLK_H -#define __ARCH_ARM_SRC_KL_CHIP_KL_CLK_H - -/******************************************************************************************** - * Included Files - ********************************************************************************************/ - -#include <nuttx/config.h> - -#include "chip.h" - -/******************************************************************************************** - * Pre-processor Definitions - ********************************************************************************************/ -/* Well-known clock frequencies *************************************************************/ - -#define KL_INTHI_FREQUENCY 22118400 -#define KL_INTLO_FREQUENCY 10000 - -/* Register offsets *************************************************************************/ - -#define KL_CLK_PWRCON_OFFSET 0x0000 /* System power down control register */ -#define KL_CLK_AHBCLK_OFFSET 0x0004 /* AHB devices clock enable control register */ -#define KL_CLK_APBCLK_OFFSET 0x0008 /* APB devices clock enable control register */ -#define KL_CLK_CLKSTATUS_OFFSET 0x000c /* Clock status monitor register */ -#define KL_CLK_CLKSEL0_OFFSET 0x0010 /* Clock source select control register 0 */ -#define KL_CLK_CLKSEL1_OFFSET 0x0014 /* Clock source select control register 1 */ -#define KL_CLK_CLKSEL2_OFFSET 0x001c /* Clock source select control register 2 */ -#define KL_CLK_CLKDIV_OFFSET 0x0018 /* Clock divider number register */ -#define KL_CLK_PLLCON_OFFSET 0x0020 /* PLL control register */ -#define KL_CLK_FRQDIV_OFFSET 0x0024 /* Frequency divider control register */ - -/* Register addresses ***********************************************************************/ - -#define KL_CLK_PWRCON (KL_CLK_BASE+KL_CLK_PWRCON_OFFSET) -#define KL_CLK_AHBCLK (KL_CLK_BASE+KL_CLK_AHBCLK_OFFSET) -#define KL_CLK_APBCLK (KL_CLK_BASE+KL_CLK_APBCLK_OFFSET) -#define KL_CLK_CLKSTATUS (KL_CLK_BASE+KL_CLK_CLKSTATUS_OFFSET) -#define KL_CLK_CLKSEL0 (KL_CLK_BASE+KL_CLK_CLKSEL0_OFFSET) -#define KL_CLK_CLKSEL1 (KL_CLK_BASE+KL_CLK_CLKSEL1_OFFSET) -#define KL_CLK_CLKSEL2 (KL_CLK_BASE+KL_CLK_CLKSEL2_OFFSET) -#define KL_CLK_CLKDIV (KL_CLK_BASE+KL_CLK_CLKDIV_OFFSET) -#define KL_CLK_PLLCON (KL_CLK_BASE+KL_CLK_PLLCON_OFFSET) -#define KL_CLK_FRQDIV (KL_CLK_BASE+KL_CLK_FRQDIV_OFFSET) - -/* Register bit-field definitions ***********************************************************/ - -/* System power down control register */ - -#define CLK_PWRCON_XTL12M_EN (1 << 0) /* Bit 0: External 4~24 mhz high speed crystal enable */ -#define CLK_PWRCON_XTL32K_EN (1 << 1) /* Bit 1: External 32.768 khz low speed crystal enable */ -#define CLK_PWRCON_OSC22M_EN (1 << 2) /* Bit 2: Internal 22.1184 MHz high speed oscillator enable */ -#define CLK_PWRCON_OSC10K_EN (1 << 3) /* Bit 3: Internal 10KHz low speed oscillator enable */ -#define CLK_PWRCON_PD_WU_DLY (1 << 4) /* Bit 4: Enable the wake-up delay counter */ -#define CLK_PWRCON_PD_WU_INT_EN (1 << 5) /* Bit 5: Power down mode wake-up interrupt status */ -#define CLK_PWRCON_PD_WU_STS (1 << 6) /* Bit 6: Power down mode wake-up interupt status */ -#define CLK_PWRCON_PWR_DOWN_EN (1 << 7) /* Bit 7: System power down enable bit */ -#define CLK_PWRCON_PD_WAIT_CPU (1 << 8) /* Bit 8: Power down entry condition */ - -/* AHB devices clock enable control register */ - -#define CLK_AHBCLK_PDMA_EN (1 << 1) /* Bit 1: PDMA acontroller clock enable control */ -#define CLK_AHBCLK_ISP_EN (1 << 2) /* Bit 2: FLASH ISPO controller clock enable control */ -#define CLK_AHBCLK_EBI_EN (1 << 3) /* Bit 3: EBI controller clock enable control */ - -/* APB devices clock enable control register */ - -#define CLK_APBCLK_WDT_EN (1 << 0) /* Bit 0: Watchdog time clock enable */ -#define CLK_APBCLK_RTC_EN (1 << 1) /* Bit 1: Real time clock clock enable */ -#define CLK_APBCLK_TMR0_EN (1 << 2) /* Bit 2: Timer0 clock enable */ -#define CLK_APBCLK_TMR1_EN (1 << 3) /* Bit 3: Timer1 clock enable */ -#define CLK_APBCLK_TMR2_EN (1 << 4) /* Bit 4: Timer2 clock enable */ -#define CLK_APBCLK_TMR3_EN (1 << 5) /* Bit 5: Timer3 clock enable */ -#define CLK_APBCLK_FDIV_EN (1 << 6) /* Bit 6: Frequency divider output clock enable */ -#define CLK_APBCLK_I2C0_EN (1 << 8) /* Bit 8: I2C0 clock enable */ -#define CLK_APBCLK_I2C1_EN (1 << 9) /* Bit 9: I2C1 clock enable */ -#define CLK_APBCLK_SPI0_EN (1 << 12) /* Bit 12: SPI0 clock enable */ -#define CLK_APBCLK_SPI1_EN (1 << 13) /* Bit 13: SPI1 clock enable */ -#define CLK_APBCLK_SPI2_EN (1 << 14) /* Bit 14: SPI2 clock enable */ -#define CLK_APBCLK_SPI3_EN (1 << 15) /* Bit 15: SPI3 clock enable */ -#define CLK_APBCLK_UART0_EN (1 << 16) /* Bit 16: UART0 clock enable */ -#define CLK_APBCLK_UART1_EN (1 << 17) /* Bit 17: UART1 clock enable */ -#define CLK_APBCLK_UART2_EN (1 << 18) /* Bit 18: UART2 clock enable */ -#define CLK_APBCLK_PWM01_EN (1 << 20) /* Bit 20: PWM_01 clock enable */ -#define CLK_APBCLK_PWM23_EN (1 << 21) /* Bit 21: PWM_23 clock enable */ -#define CLK_APBCLK_PWM45_EN (1 << 22) /* Bit 22: PWM_45 clock enable */ -#define CLK_APBCLK_PWM67_EN (1 << 23) /* Bit 23: PWM_67 clock enable */ -#define CLK_APBCLK_USBD_EN (1 << 27) /* Bit 27: USB 2.0 FS device controller clock enable */ -#define CLK_APBCLK_ADC_EN (1 << 28) /* Bit 28: Analog-digital-converter clock enable */ -#define CLK_APBCLK_I2S_EN (1 << 29) /* Bit 29: I2S clock enable */ -#define CLK_APBCLK_ACMP_EN (1 << 30) /* Bit 30: Analog comparator clock enable */ -#define CLK_APBCLK_PS2_EN (1 << 31) /* Bit 31: PS/2 clock enable */ - -/* Clock status monitor register */ - -#define CLK_CLKSTATUS_XTL12M_STB (1 << 0) /* Bit 0: External 4~24 mhz high speed crystal - * clock source stable flag */ -#define CLK_CLKSTATUS_STL32K_STB (1 << 1) /* Bit 1: External 32.768 kHz low speed crystal - * clock source stable flag */ -#define CLK_CLKSTATUS_PLL_STB (1 << 2) /* Bit 2: Internal PLL clock source stable flag */ -#define CLK_CLKSTATUS_OSC10K_STB (1 << 3) /* Bit 3: Internal 10kHz low speed clock source - * stable flag */ -#define CLK_CLKSTATUS_OSC22M_STB (1 << 4) /* Bit 4: Internal 22.1184MHz high speed - * osciallator clock source stable flag */ -#define CLK_CLKSTATUS_CLK_SW_FAIL (1 << 7) /* Bit 7: Clock switching fail flag */ - -/* Clock source select control register 0 */ - -#define CLK_CLKSEL0_HCLK_S_SHIFT (0) /* Bits 0-2: HCLK clock source select */ -#define CLK_CLKSEL0_HCLK_S_MASK (7 << CLK_CLKSEL0_HCLK_S_SHIFT) -# define CLK_CLKSEL0_HCLK_S_XTALHI (0 << CLK_CLKSEL0_HCLK_S_SHIFT) /* High speed XTAL clock */ -# define CLK_CLKSEL0_HCLK_S_XTALLO (1 << CLK_CLKSEL0_HCLK_S_SHIFT) /* Low speed XTAL clock */ -# define CLK_CLKSEL0_HCLK_S_PLL (2 << CLK_CLKSEL0_HCLK_S_SHIFT) /* PLL clock */ -# define CLK_CLKSEL0_HCLK_S_INTLO (3 << CLK_CLKSEL0_HCLK_S_SHIFT) /* Internal low speed clock */ -# define CLK_CLKSEL0_HCLK_S_INTHI (7 << CLK_CLKSEL0_HCLK_S_SHIFT) /* Internal high speed clock */ -#define CLK_CLKSEL0_STCLK_S_SHIFT (3) /* Bits 3-5: Cortex M0 Systick clock source select */ -#define CLK_CLKSEL0_STCLK_S_MASK (7 << CLK_CLKSEL0_STCLK_S_SHIFT) -# define CLK_CLKSEL0_STCLK_S_XTALHI (0 << CLK_CLKSEL0_STCLK_S_SHIFT) /* High speed XTAL clock */ -# define CLK_CLKSEL0_STCLK_S_XTALLO (1 << CLK_CLKSEL0_STCLK_S_SHIFT) /* Low speed XTAL clock */ -# define CLK_CLKSEL0_STCLK_S_XTALDIV2 (2 << CLK_CLKSEL0_STCLK_S_SHIFT) /* High speed XTAL clock/2 */ -# define CLK_CLKSEL0_STCLK_S_HCLKDIV2 (3 << CLK_CLKSEL0_STCLK_S_SHIFT) /* HCLK/2 */ -# define CLK_CLKSEL0_STCLK_S_INTDIV2 (7 << CLK_CLKSEL0_STCLK_S_SHIFT) /* Internal high speed clock/2 */ - -/* Clock source select control register 1 */ - -#define CLK_CLKSEL1_WDT_S_SHIFT (0) /* Bits 0-1: Watchdog timer clock source select */ -#define CLK_CLKSEL1_WDT_S_MASK (3 << CLK_CLKSEL1_WDT_S_SHIFT) -# define CLK_CLKSEL1_ADC_S_HCLKDIV (2 << CLK_CLKSEL1_WDT_S_SHIFT) /* HCLK / 2048 */ -# define CLK_CLKSEL1_ADC_S_INTLO (3 << CLK_CLKSEL1_WDT_S_SHIFT) /* Internal low speed clock */ -#define CLK_CLKSEL1_ADC_S_SHIFT (2) /* Bits 2-3: ADC clock source select */ -#define CLK_CLKSEL1_ADC_S_MASK (3 << CLK_CLKSEL1_ADC_S_SHIFT) -# define CLK_CLKSEL1_ADC_S_XTALHI (0 << CLK_CLKSEL1_ADC_S_SHIFT) /* High speed XTAL clock */ -# define CLK_CLKSEL1_ADC_S_PLL (1 << CLK_CLKSEL1_ADC_S_SHIFT) /* PLL */ -# define CLK_CLKSEL1_ADC_S_INTHI (3 << CLK_CLKSEL1_ADC_S_SHIFT) /* Internal high speed clock */ -#define CLK_CLKSEL1_TMR0_S_SHIFT (8) /* Bits 8-10: Timer0 clock source select */ -#define CLK_CLKSEL1_TMR0_S_MASK (7 << CLK_CLKSEL1_TMR0_S_SHIFT) -# define CLK_CLKSEL1_TMR0_S_XTALHI (0 << CLK_CLKSEL1_TMR0_S_SHIFT) /* High speed XTAL clock */ -# define CLK_CLKSEL1_TMR0_S_XTALLO (1 << CLK_CLKSEL1_TMR0_S_SHIFT) /* Low speed XTAL clock */ -# define CLK_CLKSEL1_TMR0_S_HCLK (2 << CLK_CLKSEL1_TMR0_S_SHIFT) /* HCLK */ -# define CLK_CLKSEL1_TMR0_S_INTHI (7 << CLK_CLKSEL1_TMR0_S_SHIFT) /* Internal high speed clock */ -#define CLK_CLKSEL1_TMR1_S_SHIFT (12) /* Bits 12-14: Timer1 clock source select */ -#define CLK_CLKSEL1_TMR1_S_MASK (7 << CLK_CLKSEL1_TMR1_S_SHIFT) -# define CLK_CLKSEL1_TMR1_S_XTALHI (0 << CLK_CLKSEL1_TMR1_S_SHIFT) /* High speed XTAL clock */ -# define CLK_CLKSEL1_TMR1_S_XTALLO (1 << CLK_CLKSEL1_TMR1_S_SHIFT) /* Low speed XTAL clock */ -# define CLK_CLKSEL1_TMR1_S_HCLK (2 << CLK_CLKSEL1_TMR1_S_SHIFT) /* HCLK */ -# define CLK_CLKSEL1_TMR1_S_INTHI (7 << CLK_CLKSEL1_TMR1_S_SHIFT) /* Internal high speed clock */ -#define CLK_CLKSEL1_TMR2_S_SHIFT (16) /* Bits 16-18: Timer2 clock source select */ -#define CLK_CLKSEL1_TMR2_S_MASK (7 << CLK_CLKSEL1_TMR2_S_SHIFT) -# define CLK_CLKSEL1_TMR2_S_XTALHI (0 << CLK_CLKSEL1_TMR2_S_SHIFT) /* High speed XTAL clock */ -# define CLK_CLKSEL1_TMR2_S_XTALLO (1 << CLK_CLKSEL1_TMR2_S_SHIFT) /* Low speed XTAL clock */ -# define CLK_CLKSEL1_TMR2_S_HCLK (2 << CLK_CLKSEL1_TMR2_S_SHIFT) /* HCLK */ -# define CLK_CLKSEL1_TMR2_S_INTHI (7 << CLK_CLKSEL1_TMR2_S_SHIFT) /* Internal high speed clock */ -#define CLK_CLKSEL1_TMR3_S_SHIFT (20) /* Bits 20-22: Timer3 clock source select */ -#define CLK_CLKSEL1_TMR3_S_MASK (7 << CLK_CLKSEL1_TMR3_S_SHIFT) -# define CLK_CLKSEL1_TMR3_S_XTALHI (0 << CLK_CLKSEL1_TMR3_S_SHIFT) /* High speed XTAL clock */ -# define CLK_CLKSEL1_TMR3_S_XTALLO (1 << CLK_CLKSEL1_TMR3_S_SHIFT) /* Low speed XTAL clock */ -# define CLK_CLKSEL1_TMR3_S_HCLK (2 << CLK_CLKSEL1_TMR3_S_SHIFT) /* HCLK */ -# define CLK_CLKSEL1_TMR3_S_INTHI (7 << CLK_CLKSEL1_TMR3_S_SHIFT) /* Internal high speed clock */ -#define CLK_CLKSEL1_UART_S_SHIFT (24) /* Bits 24-25: UART clock source select */ -#define CLK_CLKSEL1_UART_S_MASK (3 << CLK_CLKSEL1_UART_S_SHIFT) -# define CLK_CLKSEL1_UART_S_XTALHI (0 << CLK_CLKSEL1_UART_S_SHIFT) /* High speed XTAL clock */ -# define CLK_CLKSEL1_UART_S_PLL (1 << CLK_CLKSEL1_UART_S_SHIFT) /* PLL */ -# define CLK_CLKSEL1_UART_S_INTHI (3 << CLK_CLKSEL1_UART_S_SHIFT) /* Internal high speed clock */ -#define CLK_CLKSEL1_PWM01_S_SHIFT (28) /* Bits 28-29: PWM0 and PWM1 clock source select */ -#define CLK_CLKSEL1_PWM01_S_MASK (3 << CLK_CLKSEL1_PWM01_S_SHIFT) -# define CLK_CLKSEL1_PWM01_S_XTALHI (0 << CLK_CLKSEL1_PWM01_S_SHIFT) /* High speed XTAL clock */ -# define CLK_CLKSEL1_PWM01_S_XTALLO (1 << CLK_CLKSEL1_PWM01_S_SHIFT) /* Low speed XTAL clock */ -# define CLK_CLKSEL1_PWM01_S_HCLK (2 << CLK_CLKSEL1_PWM01_S_SHIFT) /* HCLK */ -# define CLK_CLKSEL1_PWM01_S_INTHI (3 << CLK_CLKSEL1_PWM01_S_SHIFT) /* Internal high speed clock */ -#define CLK_CLKSEL1_PWM23_S_SHIFT (30) /* Bits 30-31: PWM2 and PWM3 clock source select */ -#define CLK_CLKSEL1_PWM23_S_MASK (3 << CLK_CLKSEL1_PWM23_S_SHIFT) -# define CLK_CLKSEL1_PWM23_S_XTALHI (0 << CLK_CLKSEL1_PWM23_S_SHIFT) /* High speed XTAL clock */ -# define CLK_CLKSEL1_PWM23_S_XTALLO (1 << CLK_CLKSEL1_PWM23_S_SHIFT) /* Low speed XTAL clock */ -# define CLK_CLKSEL1_PWM23_S_HCLK (2 << CLK_CLKSEL1_PWM23_S_SHIFT) /* HCLK */ -# define CLK_CLKSEL1_PWM23_S_INTHI (3 << CLK_CLKSEL1_PWM23_S_SHIFT) /* Internal high speed clock */ - -/* Clock source select control register 2 */ - -#define CLK_CLKSEL2_I2S_S_SHIFT (0) /* Bits 0-1: I2S clock source select */ -#define CLK_CLKSEL2_I2S_S_MASK (3 << CLK_CLKSEL2_I2S_S_SHIFT) -# define CLK_CLKSEL1_I2S_S_XTALHI (0 << CLK_CLKSEL2_I2S_S_SHIFT) /* High speed XTAL clock */ -# define CLK_CLKSEL1_I2S_S_XTALLO (1 << CLK_CLKSEL2_I2S_S_SHIFT) /* Low speed XTAL clock */ -# define CLK_CLKSEL1_I2S_S_HCLK (2 << CLK_CLKSEL2_I2S_S_SHIFT) /* HCLK */ -# define CLK_CLKSEL1_I2S_S_INTHI (3 << CLK_CLKSEL2_I2S_S_SHIFT) /* Internal high speed clock */ -#define CLK_CLKSEL2_FRQDIV_S_SHIFT (2) /* Bits 2-3: Frequency divider clock source select */ -#define CLK_CLKSEL2_FRQDIV_S_MASK (3 << CLK_CLKSEL2_FRQDIV_S_SHIFT) -# define CLK_CLKSEL1_FRQDIV_S_XTALHI (0 << CLK_CLKSEL2_FRQDIV_S_SHIFT) /* High speed XTAL clock */ -# define CLK_CLKSEL1_FRQDIV_S_XTALLO (1 << CLK_CLKSEL2_FRQDIV_S_SHIFT) /* Low speed XTAL clock */ -# define CLK_CLKSEL1_FRQDIV_S_HCLK (2 << CLK_CLKSEL2_FRQDIV_S_SHIFT) /* HCLK */ -#define CLK_CLKSEL2_PWM45_S_SHIFT (4) /* Bits 4-5: PWM4 and PWM5 clock source select */ -#define CLK_CLKSEL2_PWM45_S_MASK (3 << CLK_CLKSEL2_PWM45_S_SHIFT) -# define CLK_CLKSEL1_PWM45_S_XTALHI (0 << CLK_CLKSEL2_PWM45_S_SHIFT) /* High speed XTAL clock */ -# define CLK_CLKSEL1_PWM45_S_XTALLO (1 << CLK_CLKSEL2_PWM45_S_SHIFT) /* Low speed XTAL clock */ -# define CLK_CLKSEL1_PWM45_S_HCLK (2 << CLK_CLKSEL2_PWM45_S_SHIFT) /* HCLK */ -# define CLK_CLKSEL1_PWM45_S_INTHI (3 << CLK_CLKSEL2_PWM45_S_SHIFT) /* Internal high speed clock */ -#define CLK_CLKSEL2_PWM67_S_SHIFT (6) /* Bits 6-7: PWM6 and PWM7 clock source select */ -#define CLK_CLKSEL2_PWM67_S_MASK (3 << CLK_CLKSEL2_PWM67_S_SHIFT) -# define CLK_CLKSEL1_PWM67_S_XTALHI (0 << CLK_CLKSEL2_PWM67_S_SHIFT) /* High speed XTAL clock */ -# define CLK_CLKSEL1_PWM67_S_XTALLO (1 << CLK_CLKSEL2_PWM67_S_SHIFT) /* Low speed XTAL clock */ -# define CLK_CLKSEL1_PWM67_S_HCLK (2 << CLK_CLKSEL2_PWM67_S_SHIFT) /* HCLK */ -# define CLK_CLKSEL1_PWM67_S_INTHI (3 << CLK_CLKSEL2_PWM67_S_SHIFT) /* Internal high speed clock */ - -/* Clock divider number register */ - -#define CLK_CLKDIV_HCLK_N_SHIFT (0) /* Bits 0-3: HCLCK divide from clock source */ -#define CLK_CLKDIV_HCLK_N_MASK (15 << CLK_CLKDIV_HCLK_N_SHIFT) -# define CLK_CLKDIV_HCLK_N(n) (((n)-1) << CLK_CLKDIV_HCLK_N_SHIFT) /* n=1..16 */ -#define CLK_CLKDIV_USB_N_SHIFT (4) /* Bits 4-7: USBD divide from clock source */ -#define CLK_CLKDIV_USB_N_MASK (15 << CLK_CLKDIV_USB_N_SHIFT) -# define CLK_CLKDIV_USB_N(n) (((n)-1) << CLK_CLKDIV_USB_N_SHIFT) /* n=1..16 */ -#define CLK_CLKDIV_UART_N_SHIFT (8) /* Bits 8-11 UART divide from clock source */ -#define CLK_CLKDIV_UART_N_MASK (15 << CLK_CLKDIV_UART_N_SHIFT) -# define CLK_CLKDIV_UART_N(n) (((n)-1) << CLK_CLKDIV_UART_N_SHIFT) /* n=1..16 */ -#define CLK_CLKDIV_ADC_N_SHIFT (16) /* Bits 16-23: ADC divide from clock source */ -#define CLK_CLKDIV_ADC_N_MASK (255 << CLK_CLKDIV_ADC_N_SHIFT) -# define CLK_CLKDIV_ADC_N(n) (((n)-1) << CLK_CLKDIV_UART_N_SHIFT) /* n=1..256 */ - -/* PLL control register */ - -#define CLK_PLLCON_FB_DV_SHIFT (0) /* Bits 0-8: PLL feedback divider control pins */ -#define CLK_PLLCON_FB_DV_MASK (0x1ff << CLK_PLLCON_FB_DV_SHIFT) -# define CLK_PLLCON_FB_DV(n) ((n) << CLK_PLLCON_FB_DV_SHIFT) -#define CLK_PLLCON_IN_DV_SHIFT (9) /* bits 9-13: PLL input divider control pins */ -#define CLK_PLLCON_IN_DV_MASK (0x1f << CLK_PLLCON_IN_DV_SHIFT) -# define CLK_PLLCON_IN_DV(n) ((n) << CLK_PLLCON_IN_DV_SHIFT) -#define CLK_PLLCON_OUT_DV_SHIFT (14) /* Bits 14-15: PLL output divider control pins */ -#define CLK_PLLCON_OUT_DV_MASK (3 << CLK_PLLCON_OUT_DV_SHIFT) -# define CLK_PLLCON_OUT_DV(n) ((n) << CLK_PLLCON_OUT_DV_SHIFT) -#define CLK_PLLCON_PD (1 << 16) /* Bit 16: Power down mode */ -#define CLK_PLLCON_BP (1 << 17) /* Bit 17: PLL bypass control */ -#define CLK_PLLCON_OE (1 << 18) /* Bit 18: PLL OE (FOUT enable) pin control */ -#define CLK_PLLCON_PLL_SRC (1 << 19) /* Bit 19: PLL source clock select */ - -/* Frequency divider control register */ - -#define CLK_FRQDIV_FSEL_SHIFT (0) /* Bits 0-3: Divider output frequency selection bits */ -#define CLK_FRQDIV_FSEL_MASK (15 << CLK_FRQDIV_FSEL_SHIFT) -# define CLK_FRQDIV_FSEL(n) ((n) << CLK_FRQDIV_FSEL_SHIFT) /* fout = fin / (2^(n+1)) */ -#define CLK_FRQDIV_DIVIDER_EN (1 << 4) /* Bit 4: Frequency divider enable bit */ - -/******************************************************************************************** - * Public Types - ********************************************************************************************/ - -/******************************************************************************************** - * Public Data - ********************************************************************************************/ - -/******************************************************************************************** - * Public Functions - ********************************************************************************************/ - -#endif /* __ARCH_ARM_SRC_KL_CHIP_KL_CLK_H */ diff --git a/nuttx/arch/arm/src/kl/kl_start.c b/nuttx/arch/arm/src/kl/kl_start.c index 9a55a1750..decd934a0 100644 --- a/nuttx/arch/arm/src/kl/kl_start.c +++ b/nuttx/arch/arm/src/kl/kl_start.c @@ -72,13 +72,13 @@ */ #define IDLE_STACK ((uint32_t)&_ebss+CONFIG_IDLETHREAD_STACKSIZE-4) -#define HEAP_BASE ((uint32_t)&_ebss+CONFIG_IDLETHREAD_STACKSIZE-4) +#define HEAP_BASE ((uint32_t)&_ebss+CONFIG_IDLETHREAD_STACKSIZE) /**************************************************************************** * Public Data ****************************************************************************/ -const uint32_t g_idle_topstack = HEAP_BASE; +const uint32_t g_idle_topstack = IDLE_STACK; /**************************************************************************** * Private Functions diff --git a/nuttx/arch/arm/src/kl/kl_timerisr.c b/nuttx/arch/arm/src/kl/kl_timerisr.c index 7ee8cba5f..0df667016 100644 --- a/nuttx/arch/arm/src/kl/kl_timerisr.c +++ b/nuttx/arch/arm/src/kl/kl_timerisr.c @@ -51,26 +51,20 @@ #include "up_arch.h" #include "chip.h" -#include "chip/kl_clk.h" #include "chip/kl_gcr.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ -/* Get the frequency of the selected clock source */ +/* "The CLKSOURCE bit in SysTick Control and Status register selects either + * the core clock (when CLKSOURCE = 1) or a divide-by-16 of the core clock + * (when CLKSOURCE = 0). ..." + */ #if defined(CONFIG_KL_SYSTICK_CORECLK) -# define SYSTICK_CLOCK BOARD_HCLK_FREQUENCY /* Core clock */ -#elif defined(CONFIG_KL_SYSTICK_XTALHI) -# define SYSTICK_CLOCK BOARD_XTALHI_FREQUENCY /* High speed XTAL clock */ -#elif defined(CONFIG_KL_SYSTICK_XTALLO) -# define SYSTICK_CLOCK BOARD_XTALLO_FREQUENCY /* Low speed XTAL clock */ -#elif defined(CONFIG_KL_SYSTICK_XTALHId2) -# define SYSTICK_CLOCK (BOARD_XTALHI_FREQUENCY/2) /* High speed XTAL clock/2 */ -#elif defined(CONFIG_KL_SYSTICK_HCLKd2) -# define SYSTICK_CLOCK (BOARD_HCLK_FREQUENCY/2) /* HCLK/2 */ -#elif defined(CONFIG_KL_SYSTICK_INTHId2) -# define SYSTICK_CLOCK (KL_INTHI_FREQUENCY/2) /* Internal high speed clock/2 */ +# define SYSTICK_CLOCK BOARD_CORECLK_FREQ /* Core clock */ +#elif defined(CONFIG_KL_SYSTICK_CORECLK_DIV16) +# define (SYSTICK_CLOCK BOARD_CORECLK_FREQ / 16) /* Core clock divided by 16 */ #endif /* The desired timer interrupt frequency is provided by the definition @@ -108,50 +102,6 @@ ****************************************************************************/ /**************************************************************************** - * Name: kl_unlock - * - * Description: - * Unlock registers - * - * Input Parameters: - * None - * - * Returned Value: - * None - * - ****************************************************************************/ - -#ifdef CONFIG_KL_SYSTICK_CORECLK -static inline void kl_unlock(void) -{ - putreg32(0x59, KL_GCR_REGWRPROT); - putreg32(0x16, KL_GCR_REGWRPROT); - putreg32(0x88, KL_GCR_REGWRPROT); -} -#endif - -/**************************************************************************** - * Name: kl_clock - * - * Description: - * Lok registers - * - * Input Parameters: - * None - * - * Returned Value: - * None - * - ****************************************************************************/ - -#ifdef CONFIG_KL_SYSTICK_CORECLK -static inline void kl_lock(void) -{ - putreg32(0, KL_GCR_REGWRPROT); -} -#endif - -/**************************************************************************** * Global Functions ****************************************************************************/ @@ -185,37 +135,6 @@ void up_timerinit(void) { uint32_t regval; - /* Configure the SysTick clock source. This is only necessary if we are not - * using the Cortex-M0 core clock as the frequency source. - */ - -#ifndef CONFIG_KL_SYSTICK_CORECLK - /* This field is write protected and must be unlocked */ - - kl_unlock(); - - /* Read the CLKSEL0 register and set the STCLK_S field appropriately */ - - regval = getreg32(KL_CLK_CLKSEL0); - regval &= ~CLK_CLKSEL0_STCLK_S_MASK; -#if defined(CONFIG_KL_SYSTICK_XTALHI) - regval |= CLK_CLKSEL0_STCLK_S_XTALHI; /* High speed XTAL clock */ -#elif defined(CONFIG_KL_SYSTICK_XTALLO) - regval |= CLK_CLKSEL0_STCLK_S_XTALLO; /* Low speed XTAL clock */ -#elif defined(CONFIG_KL_SYSTICK_XTALHId2) - regval |= CLK_CLKSEL0_STCLK_S_XTALDIV2; /* High speed XTAL clock/2 */ -#elif defined(CONFIG_KL_SYSTICK_HCLKd2) - regval |= CLK_CLKSEL0_STCLK_S_HCLKDIV2; /* HCLK/2 */ -#elif defined(CONFIG_KL_SYSTICK_INTHId2) - regval |= CLK_CLKSEL0_STCLK_S_INTDIV2; /* Internal high speed clock/2 */ -#endif - putreg32(regval, KL_CLK_CLKSEL0); - - /* Re-lock the register */ - - kl_lock(); -#endif - /* Set the SysTick interrupt to the default priority */ regval = getreg32(ARMV6M_SYSCON_SHPR3); @@ -231,8 +150,9 @@ void up_timerinit(void) (void)irq_attach(KL_IRQ_SYSTICK, (xcpt_t)up_timerisr); - /* Enable SysTick interrupts. We need to select the core clock here if - * we are not using one of the alternative clock sources above. + /* Enable SysTick interrupts. "The CLKSOURCE bit in SysTick Control and + * Status register selects either the core clock (when CLKSOURCE = 1) or + * a divide-by-16 of the core clock (when CLKSOURCE = 0). ..." */ #ifdef CONFIG_KL_SYSTICK_CORECLK diff --git a/nuttx/arch/arm/src/nuc1xx/nuc_start.c b/nuttx/arch/arm/src/nuc1xx/nuc_start.c index b21e8b86d..442fecb20 100644 --- a/nuttx/arch/arm/src/nuc1xx/nuc_start.c +++ b/nuttx/arch/arm/src/nuc1xx/nuc_start.c @@ -72,13 +72,13 @@ */ #define IDLE_STACK ((uint32_t)&_ebss+CONFIG_IDLETHREAD_STACKSIZE-4) -#define HEAP_BASE ((uint32_t)&_ebss+CONFIG_IDLETHREAD_STACKSIZE-4) +#define HEAP_BASE ((uint32_t)&_ebss+CONFIG_IDLETHREAD_STACKSIZE) /**************************************************************************** * Public Data ****************************************************************************/ -const uint32_t g_idle_topstack = HEAP_BASE; +const uint32_t g_idle_topstack = IDLE_STACK; /**************************************************************************** * Private Functions |