diff options
Diffstat (limited to 'nuttx/arch')
-rw-r--r-- | nuttx/arch/arm/src/lpc17xx/Kconfig | 449 | ||||
-rw-r--r-- | nuttx/arch/arm/src/lpc43xx/Kconfig | 44 | ||||
-rw-r--r-- | nuttx/arch/arm/src/stm32/Kconfig | 100 | ||||
-rw-r--r-- | nuttx/arch/mips/src/pic32mx/Kconfig | 288 |
4 files changed, 460 insertions, 421 deletions
diff --git a/nuttx/arch/arm/src/lpc17xx/Kconfig b/nuttx/arch/arm/src/lpc17xx/Kconfig index ae2bf3130..44e34f9f4 100644 --- a/nuttx/arch/arm/src/lpc17xx/Kconfig +++ b/nuttx/arch/arm/src/lpc17xx/Kconfig @@ -2,3 +2,452 @@ # For a description of the syntax of this configuration file, # see misc/tools/kconfig-language.txt. # + +choice + prompt "NXP LPC17XX Chip Selection" + default ARCH_CHIP_LPC1768 + depends on ARCH_CHIP_LPC17XX + +config ARCH_CHIP_LPC1751 + bool "LPC1751" + +config ARCH_CHIP_LPC1752 + bool "LPC1752" + +config ARCH_CHIP_LPC1754 + bool "LPC1754" + +config ARCH_CHIP_LPC1756 + bool "LPC1756" + +config ARCH_CHIP_LPC1758 + bool "LPC1758" + +config ARCH_CHIP_LPC1759 + bool "LPC1759" + +config ARCH_CHIP_LPC1764 + bool "LPC1764" + +config ARCH_CHIP_LPC1765 + bool "LPC1765" + +config ARCH_CHIP_LPC1766 + bool "LPC1766" + +config ARCH_CHIP_LPC1767 + bool "LPC1767" + +config ARCH_CHIP_LPC1768 + bool "LPC1768" + +config ARCH_CHIP_LPC1769 + bool "LPC1769" + +endchoice + +config ARCH_FAMILY_LPC175X + bool + default y if ARCH_CHIP_LPC1751 || ARCH_CHIP_LPC1752 || ARCH_CHIP_LPC1754 || ARCH_CHIP_LPC1756 || ARCH_CHIP_LPC1758 || ARCH_CHIP_LPC1759 + +config ARCH_FAMILY_LPC176X + bool + default y if ARCH_CHIP_LPC1764 || ARCH_CHIP_LPC1765 || ARCH_CHIP_LPC1766 || ARCH_CHIP_LPC1767 || ARCH_CHIP_LPC1768 || ARCH_CHIP_LPC1769 + +config ARCH_CORTEXM3 + bool + default y if ARCH_CHIP_LPC17XX + +config ARCH_CORTEXM4 + bool + default n + +menu "LPC17xx Peripheral Support" + +config LPC17_MAINOSC + bool "Main oscillator" + default y + +config LPC17_PLL0 + bool "PLL0" + default y + +config LPC17_PLL1 + bool "PLL1" + default y + +config LPC17_ETHERNET + bool "Ethernet" + select NET + select ARCH_HAS_PHY + default n + +config LPC17_USBHOST + bool "USB host" + select USBHOST + default n + +config LPC17_USBDEV + bool "USB Device" + select USBDEV + default n + +config LPC17_USBOTG + bool "USB OTG" + default n + depends on LPC17_USBHOST && LPC17_USBDEV + +config LPC17_UART0 + bool "UART0" + select ARCH_HAS_UART0 + default n + +config LPC17_UART1 + bool "UART1" + select ARCH_HAS_UART1 + default n + +config LPC17_UART2 + bool "UART2" + select ARCH_HAS_UART2 + default n + +config LPC17_UART3 + bool "UART3" + select ARCH_HAS_UART3 + default n + +config LPC17_CAN1 + bool "CAN1" + select ARCH_HAS_UART4 + default n + +config LPC17_CAN2 + bool "CAN2" + default n + +config LPC17_SPI + bool "SPI" + default n + +config LPC17_SSP0 + bool "SSP0" + default n + +config LPC17_SSP1 + bool "SSP1" + default n + +config LPC17_I2C0 + bool "I2C0" + default n + +config LPC17_I2C1 + bool "I2C1" + default n + +config LPC17_I2S + bool "I2S" + default n + +config LPC17_TMR0 + bool "Timer 0" + default n + +config LPC17_TMR1 + bool "Timer 1" + default n + +config LPC17_TMR2 + bool "Timer 2" + default n + +config LPC17_TMR3 + bool "Timer 3" + default n + +config LPC17_RIT + bool "RIT" + default n + +config LPC17_PWM + bool "PWM" + default n + +config LPC17_MCPWM + bool "MCPWM" + default n + +config LPC17_QEI + bool "QEI" + default n + +config LPC17_RTC + bool "RTC" + default n + +config LPC17_WDT + bool "WDT" + default n + +config LPC17_ADC + bool "ADC" + default n + +config LPC17_DAC + bool "DAC" + default n + +config LPC17_GPDMA + bool "GPDMA" + default n + +config LPC17_FLASH + bool "FLASH" + default n + +endmenu + +config SERIAL_TERMIOS + bool "Serial driver TERMIOS supported" + depends on LPC17_UART0 || LPC17_UART1 || LPC17_UART2 || LPC17_UART3 + default n + ---help--- + Serial driver supports termios.h interfaces (tcsetattr, tcflush, etc.). + If this is not defined, then the terminal settings (baud, parity, etc). + are not configurable at runtime; serial streams cannot be flushed, etc.. + +menu "CAN driver options" + +config CAN_EXTID + bool "CAN extended IDs" + depends on LPC17_CAN1 || LPC17_CAN2 + default n + ---help--- + Enables support for the 29-bit extended ID. Default Standard 11-bit IDs. + +config CAN1_BAUD + int "CAN1 BAUD" + depends on LPC17_CAN1 + ---help--- + CAN1 BAUD rate. Required if LPC17_CAN1 is defined. + +config CAN2_BAUD + int "CAN2 BAUD" + depends on LPC17_CAN2 + ---help--- + CAN2 BAUD rate. Required if CONFIG_LPC17_CAN2 is defined. + +config CAN1_DIVISOR + int "CAN1 CCLK divisor" + depends on LPC17_CAN1 + default 4 + ---help--- + CAN1 is clocked at CCLK divided by this number. (the CCLK frequency is divided + by this number to get the CAN clock). Options = {1,2,4,6}. Default: 4. + +config CAN2_DIVISOR + int "CAN2 CCLK divisor" + depends on LPC17_CAN2 + default 4 + ---help--- + CAN2 is clocked at CCLK divided by this number. (the CCLK frequency is divided + by this number to get the CAN clock). Options = {1,2,4,6}. Default: 4. + +config CAN_TSEG1 + bool "TSEG1 quanta" + depends on LPC17_CAN1 || LPC17_CAN2 + default 6 + ---help--- + The number of CAN time quanta in segment 1. Default: 6 + +config CAN_TSEG2 + bool "TSEG2 quanta" + depends on LPC17_CAN1 || LPC17_CAN2 + default 4 + ---help--- + The number of CAN time quanta in segment 2. Default: 7 + +endmenu + +menu "Ethernet driver options" + +config PHY_AUTONEG + bool "Autonegiation" + depends on LPC17_ETHERNET + ---help--- + Enable auto-negotion + +config PHY_SPEED100 + bool "100Mbit/Sec" + depends on LPC17_ETHERNET && !PHY_AUTONEG + ---help--- + Select 100Mbit vs. 10Mbit speed. + +config PHY_FDUPLEX + bool "Full duplex" + depends on LPC17_ETHERNET && !PHY_AUTONEG + ---help--- + Select full (vs. half) duplex + +config NET_EMACRAM_SIZE + int "EMAC RAM Size" + depends on LPC17_ETHERNET + default 16384 + ---help--- + Size of EMAC RAM. Default: 16384 bytes + +config NET_NTXDESC + int "Number of Tx descriptors" + depends on LPC17_ETHERNET + default 18 + ---help--- + Configured number of Tx descriptors. Default: 18 + +config NET_NRXDESC + int "Number of Rx descriptors" + depends on LPC17_ETHERNET + default 18 + ---help--- + Configured number of Rx descriptors. Default: 18 + +config NET_PRIORITY + int "Ethernet interrupt priority" + depends on LPC17_ETHERNET + default 0 + ---help--- + Ethernet interrupt priority. The is default is the higest priority (0). + +config NET_WOL + bool "Wake-up on LAN" + depends on LPC17_ETHERNET + default n + ---help--- + Enable Wake-up on Lan (not fully implemented). + +config NET_REGDEBUG + bool "Ethernet register-level debug" + depends on LPC17_ETHERNET && DEBUG + default n + ---help--- + Enable low level register debug. Also needs DEBUG. + +config NET_DUMPPACKET + bool "Enable packet dumping" + depends on LPC17_ETHERNET && DEBUG + default n + ---help--- + Dump all received and transmitted packets. Also needs DEBUG. + +config NET_HASH + bool "Hashing" + depends on LPC17_ETHERNET + default n + ---help--- + Enable receipt of near-perfect match frames. + +config NET_MULTICAST + bool "Multicast" + depends on LPC17_ETHERNET + default y if NET_IGMP + default n if !NET_IGMP + ---help--- + Enable receipt of multicast (and unicast) frames. Automatically set + if NET_IGMP is selected. + +endmenu + +menu "USB device driver options" + +config LPC17_USBDEV_FRAME_INTERRUPT + bool "USB " + depends on LPC17_USBDEV + default n + ---help--- + Handle USB Start-Of-Frame events. Enable reading SOF from interrupt + handler vs. simply reading on demand. Probably a bad idea... Unless + there is some issue with sampling the SOF from hardware asynchronously. + +config LPC17_USBDEV_EPFAST_INTERRUPT + bool "EP fast interrupt handling" + depends on LPC17_USBDEV + default n + ---help--- + Enable high priority interrupts. I have no idea why you might want to do that + +config LPC17_USBDEV_NDMADESCRIPTORS + int "Number of DMA descriptors" + depends on LPC17_USBDEV + default 8 + ---help--- + Number of DMA descriptors to allocate in SRAM. Default: 8 + +config LPC17_USBDEV_DMA + bool "Enable USB device DMA" + depends on LPC17_USBDEV + default n + ---help--- + Enable lpc17xx-specific DMA support + +config LPC17_USBDEV_NOVBUS + bool "Disable VBUS support" + depends on LPC17_USBDEV + default n + ---help--- + Define if the hardware implementation does not support the VBUS signal + +config LPC17_USBDEV_NOLED + bool "Disable USB device LCD support" + depends on LPC17_USBDEV + default n + ---help--- + Define if the hardware implementation does not support the LED output + +endmenu + +menu "USB host driver options" + +config USBHOST_OHCIRAM_SIZE + int "OHCI RAM Size" + depends on LPC17_USBHOST + default 16384 + ---help--- + Total size of OHCI RAM (in AHB SRAM Bank 1). Default: 16384 + +config USBHOST_NEDS + int "Number of Endpoint Descriptors" + depends on LPC17_USBHOST + default 2 + ---help--- + Number of endpoint descriptors. Default: 2 + +config USBHOST_NTDS + int "Number of transfer descriptors" + depends on LPC17_USBHOST + default 3 + ---help--- + Number of transfer descriptors. Default: 3 + +config USBHOST_TDBUFFERS + int "Number of descriptor buffers" + depends on LPC17_USBHOST + default 2 + ---help--- + Number of transfer descriptor buffers. Default: 2 + +config USBHOST_TDBUFSIZE + int "Descriptor buffer size" + depends on LPC17_USBHOST + default 128 + ---help--- + Size of one transfer descriptor buffer. Default 128 + +config USBHOST_IOBUFSIZE + int "I/O buffer size" + depends on LPC17_USBHOST + default 512 + ---help--- + Size of one end-user I/O buffer. This can be zero if the application + can guarantee that all end-user I/O buffers reside in AHB SRAM. + +endmenu diff --git a/nuttx/arch/arm/src/lpc43xx/Kconfig b/nuttx/arch/arm/src/lpc43xx/Kconfig index 351b940aa..3010046ef 100644 --- a/nuttx/arch/arm/src/lpc43xx/Kconfig +++ b/nuttx/arch/arm/src/lpc43xx/Kconfig @@ -261,6 +261,7 @@ config LPC43_USART0 config LPC43_UART1 bool "UART1" + select ARCH_HAS_UART1 default n config LPC43_USART2 @@ -292,49 +293,6 @@ config LPC43_WWDT endmenu -menu "UART1 Configuration" - depends on LPC43_UART1 - -config UART1_RXBUFSIZE - int "UART1 Rx buffer size" - default 256 - ---help--- - Characters are buffered as received. This specific the size of the receive - buffer. - -config UART1_TXBUFSIZE - int "UART1 Tx buffer size" - default 256 - ---help--- - Characters are buffered before being sent. This specific the size of the - transmit buffer - -config UART1_BAUD - int "UART1 BAUD" - default 11520 - ---help--- - The configured BAUD of the UART - -config UART1_BITS - int "UART1 number of bits" - default 8 - ---help--- - The number of bits. Must be either 7 or 8. - -config UART1_PARITY - int "UART1 parity" - default 0 - ---help--- - 0=no parity, 1=odd parity, 2=even parity - -config UART1_2STOP - int "UART1 two stop bits" - default 0 - ---help--- - 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit - -endmenu - config SERIAL_TERMIOS bool "Serial driver TERMIOS supported" depends on LPC43_USART0 || LPC43_UART1 || LPC43_USART2 || LPC43_USART3 diff --git a/nuttx/arch/arm/src/stm32/Kconfig b/nuttx/arch/arm/src/stm32/Kconfig index 0aa1f76b7..371d39ed4 100644 --- a/nuttx/arch/arm/src/stm32/Kconfig +++ b/nuttx/arch/arm/src/stm32/Kconfig @@ -303,10 +303,12 @@ config STM32_USART3 config STM32_UART4 bool "UART4" + select ARCH_HAS_UART4 default n config STM32_UART5 bool "UART5" + select ARCH_HAS_UART5 default n config STM32_USART6 @@ -1445,53 +1447,6 @@ config USART3_RXDMA ---help--- In high data rate usage, Rx DMA may eliminate Rx overrun errors -menu "UART4 Configuration" - depends on STM32_UART4 - -config UART4_SERIAL_CONSOLE - bool "UART4 serial console" - default y if !STM32_USART1 && !STM32_USART2 && !STM32_USART3 - ---help--- - Selects the UART4 for the console and ttys0 (default is the USART1). - -config UART4_RXBUFSIZE - int "UART4 Rx buffer size" - default 256 - ---help--- - Characters are buffered as received. This specific the size of the receive - buffer. - -config UART4_TXBUFSIZE - int "UART4 Tx buffer size" - default 256 - ---help--- - Characters are buffered before being sent. This specific the size of the - transmit buffer - -config UART4_BAUD - int "UART4 BAUD" - default 11520 - ---help--- - The configured BAUD of the UART - -config UART4_BITS - int "UART4 number of bits" - default 8 - ---help--- - The number of bits. Must be either 7 or 8. - -config UART4_PARITY - int "UART4 parity" - default 0 - ---help--- - 0=no parity, 1=odd parity, 2=even parity - -config UART4_2STOP - int "UART4 two stop bits" - default 0 - ---help--- - 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit - config UART4_RXDMA bool "UART4 Rx DMA" default n @@ -1499,55 +1454,6 @@ config UART4_RXDMA ---help--- In high data rate usage, Rx DMA may eliminate Rx overrun errors -endmenu - -menu "UART5 Configuration" - depends on STM32_UART5 - -config UART5_SERIAL_CONSOLE - bool "UART5 serial console" - default y if !STM32_USART1 && !STM32_USART2 && !STM32_USART3 && !STM32_UART4 - ---help--- - Selects the UART5 for the console and ttys0 (default is the USART1). - -config UART5_RXBUFSIZE - int "UART5 Rx buffer size" - default 256 - ---help--- - Characters are buffered as received. This specific the size of the receive - buffer. - -config UART5_TXBUFSIZE - int "UART5 Tx buffer size" - default 256 - ---help--- - Characters are buffered before being sent. This specific the size of the - transmit buffer - -config UART5_BAUD - int "UART5 BAUD" - default 11520 - ---help--- - The configured BAUD of the UART - -config UART5_BITS - int "UART5 number of bits" - default 8 - ---help--- - The number of bits. Must be either 7 or 8. - -config UART5_PARITY - int "UART5 parity" - default 0 - ---help--- - 0=no parity, 1=odd parity, 2=even parity - -config UART5_2STOP - int "UART5 two stop bits" - default 0 - ---help--- - 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit - config UART5_RXDMA bool "UART5 Rx DMA" default n @@ -1555,8 +1461,6 @@ config UART5_RXDMA ---help--- In high data rate usage, Rx DMA may eliminate Rx overrun errors -endmenu - config USART6_RXDMA bool "USART6 Rx DMA" default n diff --git a/nuttx/arch/mips/src/pic32mx/Kconfig b/nuttx/arch/mips/src/pic32mx/Kconfig index 908046f83..74a093e3f 100644 --- a/nuttx/arch/mips/src/pic32mx/Kconfig +++ b/nuttx/arch/mips/src/pic32mx/Kconfig @@ -493,26 +493,32 @@ config PIC32MX_SPI4 config PIC32MX_UART1 bool "UART1" default n + select ARCH_HAS_UART1 config PIC32MX_UART2 bool "UART2" default n + select ARCH_HAS_UART1 config PIC32MX_UART3 bool "UART3" default n + select ARCH_HAS_UART3 config PIC32MX_UART4 bool "UART4" default n + select ARCH_HAS_UART4 config PIC32MX_UART5 bool "UART5" default n + select ARCH_HAS_UART5 config PIC32MX_UART6 bool "UART6" default n + select ARCH_HAS_UART6 config PIC32MX_ADC bool "ADC1" @@ -561,6 +567,8 @@ config PIC32MX_CAN2 config PIC32MX_ETHERNET bool "Ethernet" default n + select NET + select ARCH_HAS_PHY config PIC32MX_CTMU bool "Charge Time Measurement Unit (CMTU)" @@ -906,270 +914,6 @@ config PIC32MX_USBPRIO endmenu -menu "UART1 Configuration" - depends on PIC32MX_UART1 - -config UART1_RXBUFSIZE - int "UART1 Rx buffer size" - default 256 - ---help--- - Characters are buffered as received. This specific the size of the receive buffer - -config UART1_TXBUFSIZE - int "UART1 Tx buffer size" - default 256 - ---help--- - Characters are buffered before being sent. This specific the size of the transmit buffer. - -config UART1_BAUD - int "UART1 BAUD" - default 115200 - ---help--- - The configure BAUD of the UART. - -config UART1_BITS - int "UART1 bits" - default 8 - ---help--- - The number of bits. Must be either 7 or 8. - -config UART1_PARITY - int "UART1 parity" - default 0 - ---help--- - 0=no parity, 1=odd parity, 2=even parity - -config UART1_2STOP - int "UART1 2 stop bits" - default 0 - ---help--- - 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit - -endmenu - -menu "UART2 Configuration" - depends on PIC32MX_UART2 - -config UART2_RXBUFSIZE - int "UART2 Rx buffer size" - default 256 - ---help--- - Characters are buffered as received. This specific the size of the receive buffer - -config UART2_TXBUFSIZE - int "UART2 Tx buffer size" - default 256 - ---help--- - Characters are buffered before being sent. This specific the size of the transmit buffer. - -config UART2_BAUD - int "UART2 BAUD" - default 115200 - ---help--- - The configure BAUD of the UART. - -config UART2_BITS - int "UART2 bits" - default 8 - ---help--- - The number of bits. Must be either 7 or 8. - -config UART2_PARITY - int "UART2 parity" - default 0 - ---help--- - 0=no parity, 1=odd parity, 2=even parity - -config UART2_2STOP - int "UART2 2 stop bits" - default 0 - ---help--- - 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit - -endmenu - -menu "UART3 Configuration" - depends on PIC32MX_UART3 - -config UART3_RXBUFSIZE - int "UART3 Rx buffer size" - default 256 - ---help--- - Characters are buffered as received. This specific the size of the receive buffer - -config UART3_TXBUFSIZE - int "UART3 Tx buffer size" - default 256 - ---help--- - Characters are buffered before being sent. This specific the size of the transmit buffer. - -config UART3_BAUD - int "UART3 BAUD" - default 115200 - ---help--- - The configure BAUD of the UART. - -config UART3_BITS - int "UART3 bits" - default 8 - ---help--- - The number of bits. Must be either 7 or 8. - -config UART3_PARITY - int "UART3 parity" - default 0 - ---help--- - 0=no parity, 1=odd parity, 2=even parity - -config UART3_2STOP - int "UART3 2 stop bits" - default 0 - ---help--- - 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit - -endmenu - -menu "UART4 Configuration" - depends on PIC32MX_UART4 - -config UART4_SERIAL_CONSOLE - bool "UART4 serial console" - default y if !PIC32MX_UART1 && !PIC32MX_UART2 && !PIC32MX_UART3 - ---help--- - Selects the UART4 for the console and ttys0. Default: UART4 (if enabled). - -config UART4_RXBUFSIZE - int "UART4 Rx buffer size" - default 256 - ---help--- - Characters are buffered as received. This specific the size of the receive buffer - -config UART4_TXBUFSIZE - int "UART4 Tx buffer size" - default 256 - ---help--- - Characters are buffered before being sent. This specific the size of the transmit buffer. - -config UART4_BAUD - int "UART4 BAUD" - default 115200 - ---help--- - The configure BAUD of the UART. - -config UART4_BITS - int "UART4 bits" - default 8 - ---help--- - The number of bits. Must be either 7 or 8. - -config UART4_PARITY - int "UART4 parity" - default 0 - ---help--- - 0=no parity, 1=odd parity, 2=even parity - -config UART4_2STOP - int "UART4 2 stop bits" - default 0 - ---help--- - 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit - -endmenu - -menu "UART5 Configuration" - depends on PIC32MX_UART5 - -config UART5_SERIAL_CONSOLE - bool "UART5 serial console" - default y if !PIC32MX_UART1 && !PIC32MX_UART2 && !PIC32MX_UART3 && !PIC32MX_UART4 - ---help--- - Selects the UART5 for the console and ttys0. Default: UART5 (if enabled). - -config UART5_RXBUFSIZE - int "UART5 Rx buffer size" - default 256 - ---help--- - Characters are buffered as received. This specific the size of the receive buffer - -config UART5_TXBUFSIZE - int "UART5 Tx buffer size" - default 256 - ---help--- - Characters are buffered before being sent. This specific the size of the transmit buffer. - -config UART5_BAUD - int "UART5 BAUD" - default 115200 - ---help--- - The configure BAUD of the UART. - -config UART5_BITS - int "UART5 bits" - default 8 - ---help--- - The number of bits. Must be either 7 or 8. - -config UART5_PARITY - int "UART5 parity" - default 0 - ---help--- - 0=no parity, 1=odd parity, 2=even parity - -config UART5_2STOP - int "UART5 2 stop bits" - default 0 - ---help--- - 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit - -endmenu - -menu "UART6 Configuration" - depends on PIC32MX_UART6 - -config UART6_SERIAL_CONSOLE - bool "UART6 serial console" - default y if !PIC32MX_UART1 && !PIC32MX_UART2 && !PIC32MX_UART3 && !PIC32MX_UART4 && !PIC32MX_UART5 - ---help--- - Selects the UART6 for the console and ttys0. Default: UART6 (if enabled). - -config UART6_RXBUFSIZE - int "UART6 Rx buffer size" - default 256 - ---help--- - Characters are buffered as received. This specific the size of the receive buffer - -config UART6_TXBUFSIZE - int "UART6 Tx buffer size" - default 256 - ---help--- - Characters are buffered before being sent. This specific the size of the transmit buffer. - -config UART6_BAUD - int "UART6 BAUD" - default 115200 - ---help--- - The configure BAUD of the UART. - -config UART6_BITS - int "UART6 bits" - default 8 - ---help--- - The number of bits. Must be either 7 or 8. - -config UART6_PARITY - int "UART6 parity" - default 0 - ---help--- - 0=no parity, 1=odd parity, 2=even parity - -config UART6_2STOP - int "UART6 2 stop bits" - default 0 - ---help--- - 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit - -endmenu - config SERIAL_TERMIOS bool "Serial driver TERMIOS supported" depends on PIC32MX_UART1 || PIC32MX_UART2 || PIC32MX_UART3 || PIC32MX_UART4 || PIC32MX_UART5 || PIC32MX_UART6 @@ -1179,22 +923,6 @@ config SERIAL_TERMIOS If this is not defined, then the terminal settings (baud, parity, etc). are not configurable at runtime; serial streams cannot be flushed, etc.. -choice - prompt "PIC32MX PHY Selection" - depends on PIC32MX_ETHERNET - default PHY_KS8721 - -config PHY_KS8721 - bool "Micrel KS8721 PHY" - -config PHY_DP83848C - bool "National Semiconduction DP83848C PHY" - -config PHY_LAN8720 - int "SMSC LAN8720 PHY" - -endchoice - menu "PIC32MX PHY/Ethernet device driver settings" depends on PIC32MX_ETHERNET |