diff options
Diffstat (limited to 'nuttx/configs/16z/ostest/README.txt')
| -rw-r--r-- | nuttx/configs/16z/ostest/README.txt | 39 |
1 files changed, 0 insertions, 39 deletions
diff --git a/nuttx/configs/16z/ostest/README.txt b/nuttx/configs/16z/ostest/README.txt deleted file mode 100644 index 1116dabc1..000000000 --- a/nuttx/configs/16z/ostest/README.txt +++ /dev/null @@ -1,39 +0,0 @@ -README.txt -^^^^^^^^^^ - -OSTEST Project --------------- - -ostest.zfpproj is a simple ZDS II - ZNEO 5.0.1 project that will allow you - to use the ZDS-II debugger. Before using, copy the following files from - the toplevel directory: - - nuttx.hex, nuttx.map, nuttx.lod - - to this directory as: - - ostest.hex, ostest.map, ostest.lod - -Loading and Executing Code --------------------------- - -1. Copy the files to this directory as described above -2. Connect the ZiLOG XTools USB debugger. -3. Install the USB driver from the ZDS-II device_drivers directory -4. Start ZDS-II and load the ostest.zfpproj project -5. In the debug tab, connect to the debugger -6. In the debug tab, load code, reset, and go - -Hmmm... it appears that the code does not run if started by a hardware reset. -It runs only when started via the debugger. What is up with that? - -Console Output --------------- - -OS test results will be provided on the serial console at 57600 8N1 baud. - -STATUS ------- - -1. This configuration does not run correctly. There is currently a problem - with the SRAM accesses. |