diff options
Diffstat (limited to 'nuttx/configs/ea3131/usbstorage/defconfig')
| -rwxr-xr-x | nuttx/configs/ea3131/usbstorage/defconfig | 84 |
1 files changed, 42 insertions, 42 deletions
diff --git a/nuttx/configs/ea3131/usbstorage/defconfig b/nuttx/configs/ea3131/usbstorage/defconfig index df2cb7464..5dc459316 100755 --- a/nuttx/configs/ea3131/usbstorage/defconfig +++ b/nuttx/configs/ea3131/usbstorage/defconfig @@ -50,13 +50,13 @@ # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - For most ARM9 architectures, this describes the -# size of installed DRAM. For the LPC313X, it is used only to +# size of installed DRAM. For the LPC31XX, it is used only to # deterimine how to map the executable regions. It is SDRAM size # only if you are executing out of the external SDRAM; or it could # be NOR FLASH size, external SRAM size, or internal SRAM size. # CONFIG_DRAM_START - The start address of DRAM (physical) # CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) -# CONFIG_ARCH_IRQPRIO - The LPC313x supports interrupt prioritization +# CONFIG_ARCH_IRQPRIO - The LPC31xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt # stack in bytes. If not defined, the user task stacks will be @@ -76,7 +76,7 @@ CONFIG_ARCH=arm CONFIG_ARCH_ARM=y CONFIG_ARCH_ARM926EJS=y -CONFIG_ARCH_CHIP=lpc313x +CONFIG_ARCH_CHIP=lpc31xx CONFIG_ARCH_CHIP_LPC3131=y CONFIG_ARCH_BOARD=ea3131 CONFIG_ARCH_BOARD_EA3131=y @@ -108,54 +108,54 @@ CONFIG_ARCH_ROMPGTABLE=y # Identify toolchain and linker options # -CONFIG_LPC313X_CODESOURCERYW=n -CONFIG_LPC313X_CODESOURCERYL=y -CONFIG_LPC313X_DEVKITARM=n -CONFIG_LPC313X_BUILDROOT=n +CONFIG_LPC31XX_CODESOURCERYW=n +CONFIG_LPC31XX_CODESOURCERYL=y +CONFIG_LPC31XX_DEVKITARM=n +CONFIG_LPC31XX_BUILDROOT=n # # Individual subsystems can be enabled: # -CONFIG_LPC313X_MCI=n -CONFIG_LPC313X_SPI=n -CONFIG_LPC313X_UART=y +CONFIG_LPC31XX_MCI=n +CONFIG_LPC31XX_SPI=n +CONFIG_LPC31XX_UART=y # # Exernal memory available on the board (see also CONFIG_MM_REGIONS) # -# CONFIG_LPC313X_EXTSRAM0 - Select if external SRAM0 is present -# CONFIG_LPC313X_EXTSRAM0HEAP - Select if external SRAM0 should be +# CONFIG_LPC31XX_EXTSRAM0 - Select if external SRAM0 is present +# CONFIG_LPC31XX_EXTSRAM0HEAP - Select if external SRAM0 should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSRAM0SIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSRAM0SIZE - Size (in bytes) of the installed # external SRAM0 memory -# CONFIG_LPC313X_EXTSRAM1 - Select if external SRAM1 is present -# CONFIG_LPC313X_EXTSRAM1HEAP - Select if external SRAM1 should be +# CONFIG_LPC31XX_EXTSRAM1 - Select if external SRAM1 is present +# CONFIG_LPC31XX_EXTSRAM1HEAP - Select if external SRAM1 should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSRAM1SIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSRAM1SIZE - Size (in bytes) of the installed # external SRAM1 memory -# CONFIG_LPC313X_EXTSDRAM - Select if external SDRAM is present -# CONFIG_LPC313X_EXTSDRAMHEAP - Select if external SDRAM should be +# CONFIG_LPC31XX_EXTSDRAM - Select if external SDRAM is present +# CONFIG_LPC31XX_EXTSDRAMHEAP - Select if external SDRAM should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed # external SDRAM memory -# CONFIG_LPC313X_EXTNAND - Select if external NAND is present -# CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTNAND - Select if external NAND is present +# CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed # external NAND memory # -CONFIG_LPC313X_EXTSRAM0=n -CONFIG_LPC313X_EXTSRAM0HEAP=n -CONFIG_LPC313X_EXTSRAM0SIZE=(128*1024) -CONFIG_LPC313X_EXTSRAM1=n -CONFIG_LPC313X_EXTSRAM1HEAP=n -CONFIG_LPC313X_EXTSRAM1SIZE=(128*1024) -CONFIG_LPC313X_EXTSDRAM=n -CONFIG_LPC313X_EXTSDRAMHEAP=n -CONFIG_LPC313X_EXTSDRAMSIZE=(64*1024*1024) -CONFIG_LPC313X_EXTNAND=n -CONFIG_LPC313X_EXTNANDSIZE=(64*1024*1024) +CONFIG_LPC31XX_EXTSRAM0=n +CONFIG_LPC31XX_EXTSRAM0HEAP=n +CONFIG_LPC31XX_EXTSRAM0SIZE=(128*1024) +CONFIG_LPC31XX_EXTSRAM1=n +CONFIG_LPC31XX_EXTSRAM1HEAP=n +CONFIG_LPC31XX_EXTSRAM1SIZE=(128*1024) +CONFIG_LPC31XX_EXTSDRAM=n +CONFIG_LPC31XX_EXTSDRAMHEAP=n +CONFIG_LPC31XX_EXTSDRAMSIZE=(64*1024*1024) +CONFIG_LPC31XX_EXTNAND=n +CONFIG_LPC31XX_EXTNANDSIZE=(64*1024*1024) # -# LPC313X specific device driver settings +# LPC31XX specific device driver settings # # CONFIG_UART_SERIAL_CONSOLE - selects the UART for the # console and ttys0 @@ -538,20 +538,20 @@ CONFIG_USBDEV_TRACE=n CONFIG_USBDEV_TRACE_NRECORDS=128 # -# LPC313X USB Configuration +# LPC31XX USB Configuration # -# CONFIG_LPC313X_GIO_USBATTACH +# CONFIG_LPC31XX_GIO_USBATTACH # GIO that detects USB attach/detach events -# CONFIG_LPC313X_GIO_USBDPPULLUP +# CONFIG_LPC31XX_GIO_USBDPPULLUP # GIO # CONFIG_DMA320_USBDEV_DMA -# Enable LPC313X-specific DMA support +# Enable LPC31XX-specific DMA support # -CONFIG_LPC313X_GIO_USBATTACH=6 -CONFIG_LPC313X_GIO_USBDPPULLUP=17 -CONFIG_LPC313X_VENDORID=0xd320 -CONFIG_LPC313X_PRODUCTID=0x3211 -CONFIG_LPC313X_USBDEV_DMA=n +CONFIG_LPC31XX_GIO_USBATTACH=6 +CONFIG_LPC31XX_GIO_USBDPPULLUP=17 +CONFIG_LPC31XX_VENDORID=0xd320 +CONFIG_LPC31XX_PRODUCTID=0x3211 +CONFIG_LPC31XX_USBDEV_DMA=n # # USB Serial Device Configuration |