1 files changed, 102 insertions, 0 deletions
diff --git a/nuttx/configs/freedom-kl25z/src/kl_boardinitialize.c b/nuttx/configs/freedom-kl25z/src/kl_boardinitialize.c
new file mode 100644
index 000000000..562302237
--- /dev/null
+++ b/nuttx/configs/freedom-kl25z/src/kl_boardinitialize.c
@@ -0,0 +1,102 @@
+/************************************************************************************
+ * configs/freedom-kl25z/src/up_boot.c
+ * arch/arm/src/board/up_boot.c
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "freedom-kl25z.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: kl_boardinitialize
+ *
+ * Description:
+ *   All K25Z architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void kl_boardinitialize(void)
+{
+  /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
+   * kl_spiinitialize() has been brought into the link.
+   */
+
+#if defined(CONFIG_NUC1XX_SPI1) || defined(CONFIG_NUC1XX_SPI2) || defined(CONFIG_NUC1XX_SPI3)
+  if (kl_spiinitialize)
+    {
+      kl_spiinitialize();
+    }
+#endif
+
+  /* Initialize USB if the 1) USB device controller is in the configuration and 2)
+   * disabled, and 3) the weak function kl_usbinitialize() has been brought 
+   * into the build. Presumeably either CONFIG_USBDEV is also selected.
+   */
+
+#ifdef CONFIG_NUC1XX_USB
+  if (kl_usbinitialize)
+    {
+      kl_usbinitialize();
+    }
+#endif
+
+  /* Configure on-board LED if LED support has been selected. */
+
+#ifdef CONFIG_ARCH_LEDS
+  kl_ledinit();
+#endif
+}