diff options
Diffstat (limited to 'nuttx/configs/hymini-stm32v')
-rw-r--r-- | nuttx/configs/hymini-stm32v/buttons/defconfig | 46 | ||||
-rwxr-xr-x | nuttx/configs/hymini-stm32v/nsh/defconfig | 46 | ||||
-rw-r--r-- | nuttx/configs/hymini-stm32v/nsh2/defconfig | 48 | ||||
-rw-r--r-- | nuttx/configs/hymini-stm32v/nx/defconfig | 46 | ||||
-rw-r--r-- | nuttx/configs/hymini-stm32v/nxlines/defconfig | 46 | ||||
-rwxr-xr-x | nuttx/configs/hymini-stm32v/usbserial/defconfig | 46 | ||||
-rwxr-xr-x | nuttx/configs/hymini-stm32v/usbstorage/defconfig | 46 |
7 files changed, 322 insertions, 2 deletions
diff --git a/nuttx/configs/hymini-stm32v/buttons/defconfig b/nuttx/configs/hymini-stm32v/buttons/defconfig index b9b4d59e0..80099c133 100644 --- a/nuttx/configs/hymini-stm32v/buttons/defconfig +++ b/nuttx/configs/hymini-stm32v/buttons/defconfig @@ -710,6 +710,18 @@ CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # +# Watchdog timer configuration +# +# CONFIG_WATCHDOG - Enable overall watchdog timer driver support. +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +CONFIG_WATCHDOG=n + +# # Settings for examples/uip # CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) @@ -845,6 +857,40 @@ CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n # +# Settings for examples/watchdog +# +# This test depends on these specific Watchdog/NSH configurations settings (your +# specific watchdog hardware settings might require additional settings). +# +# CONFIG_WATCHDOG- Enables watchdog timer support support. +# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH +# built-in function. Default: Not built! The example can only be used +# as an NSH built-in application +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +# Specific configuration options for this example include: +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. +# Default: /dev/watchdog0 +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example +# will ping the watchdog before letting the watchdog expire. Default: 5000 +# milliseconds +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in +# milliseconds. Default: 500 milliseconds. +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in +# milliseconds before the watchdog timer expires. Default: 2000 +# milliseconds. +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT + +# # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP diff --git a/nuttx/configs/hymini-stm32v/nsh/defconfig b/nuttx/configs/hymini-stm32v/nsh/defconfig index c89638f13..e11f809d5 100755 --- a/nuttx/configs/hymini-stm32v/nsh/defconfig +++ b/nuttx/configs/hymini-stm32v/nsh/defconfig @@ -713,6 +713,18 @@ CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # +# Watchdog timer configuration +# +# CONFIG_WATCHDOG - Enable overall watchdog timer driver support. +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +CONFIG_WATCHDOG=n + +# # Settings for examples/uip # CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) @@ -830,6 +842,40 @@ CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n # +# Settings for examples/watchdog +# +# This test depends on these specific Watchdog/NSH configurations settings (your +# specific watchdog hardware settings might require additional settings). +# +# CONFIG_WATCHDOG- Enables watchdog timer support support. +# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH +# built-in function. Default: Not built! The example can only be used +# as an NSH built-in application +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +# Specific configuration options for this example include: +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. +# Default: /dev/watchdog0 +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example +# will ping the watchdog before letting the watchdog expire. Default: 5000 +# milliseconds +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in +# milliseconds. Default: 500 milliseconds. +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in +# milliseconds before the watchdog timer expires. Default: 2000 +# milliseconds. +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT + +# # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP diff --git a/nuttx/configs/hymini-stm32v/nsh2/defconfig b/nuttx/configs/hymini-stm32v/nsh2/defconfig index 2bb9a8bf0..fea9830fb 100644 --- a/nuttx/configs/hymini-stm32v/nsh2/defconfig +++ b/nuttx/configs/hymini-stm32v/nsh2/defconfig @@ -683,6 +683,18 @@ CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # +# Watchdog timer configuration +# +# CONFIG_WATCHDOG - Enable overall watchdog timer driver support. +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +CONFIG_WATCHDOG=n + +# # Graphics related configuration settings # # CONFIG_NX @@ -1168,12 +1180,44 @@ CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS=n CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER=n CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS=n - CONFIG_EXAMPLES_LCDTEST_BUILTIN=y - CONFIG_EXAMPLES_BUTTONS_BUILTIN=y # +# Settings for examples/watchdog +# +# This test depends on these specific Watchdog/NSH configurations settings (your +# specific watchdog hardware settings might require additional settings). +# +# CONFIG_WATCHDOG- Enables watchdog timer support support. +# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH +# built-in function. Default: Not built! The example can only be used +# as an NSH built-in application +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +# Specific configuration options for this example include: +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. +# Default: /dev/watchdog0 +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example +# will ping the watchdog before letting the watchdog expire. Default: 5000 +# milliseconds +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in +# milliseconds. Default: 500 milliseconds. +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in +# milliseconds before the watchdog timer expires. Default: 2000 +# milliseconds. +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT + +# # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP diff --git a/nuttx/configs/hymini-stm32v/nx/defconfig b/nuttx/configs/hymini-stm32v/nx/defconfig index f19b0dfab..a53fbba41 100644 --- a/nuttx/configs/hymini-stm32v/nx/defconfig +++ b/nuttx/configs/hymini-stm32v/nx/defconfig @@ -729,6 +729,18 @@ CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # +# Watchdog timer configuration +# +# CONFIG_WATCHDOG - Enable overall watchdog timer driver support. +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +CONFIG_WATCHDOG=n + +# # Graphics related configuration settings # # CONFIG_NX @@ -1118,6 +1130,40 @@ CONFIG_EXAMPLES_NXLINES_BPP=16 CONFIG_EXAMPLES_NXLINES_EXTERNINIT=n # +# Settings for examples/watchdog +# +# This test depends on these specific Watchdog/NSH configurations settings (your +# specific watchdog hardware settings might require additional settings). +# +# CONFIG_WATCHDOG- Enables watchdog timer support support. +# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH +# built-in function. Default: Not built! The example can only be used +# as an NSH built-in application +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +# Specific configuration options for this example include: +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. +# Default: /dev/watchdog0 +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example +# will ping the watchdog before letting the watchdog expire. Default: 5000 +# milliseconds +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in +# milliseconds. Default: 500 milliseconds. +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in +# milliseconds before the watchdog timer expires. Default: 2000 +# milliseconds. +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT + +# # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP diff --git a/nuttx/configs/hymini-stm32v/nxlines/defconfig b/nuttx/configs/hymini-stm32v/nxlines/defconfig index f25914704..4d7533817 100644 --- a/nuttx/configs/hymini-stm32v/nxlines/defconfig +++ b/nuttx/configs/hymini-stm32v/nxlines/defconfig @@ -733,6 +733,18 @@ CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # +# Watchdog timer configuration +# +# CONFIG_WATCHDOG - Enable overall watchdog timer driver support. +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +CONFIG_WATCHDOG=n + +# # Graphics related configuration settings # # CONFIG_NX @@ -1174,6 +1186,40 @@ CONFIG_EXAMPLES_NXLINES_BPP=16 CONFIG_EXAMPLES_NXLINES_EXTERNINIT=n # +# Settings for examples/watchdog +# +# This test depends on these specific Watchdog/NSH configurations settings (your +# specific watchdog hardware settings might require additional settings). +# +# CONFIG_WATCHDOG- Enables watchdog timer support support. +# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH +# built-in function. Default: Not built! The example can only be used +# as an NSH built-in application +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +# Specific configuration options for this example include: +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. +# Default: /dev/watchdog0 +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example +# will ping the watchdog before letting the watchdog expire. Default: 5000 +# milliseconds +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in +# milliseconds. Default: 500 milliseconds. +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in +# milliseconds before the watchdog timer expires. Default: 2000 +# milliseconds. +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT + +# # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP diff --git a/nuttx/configs/hymini-stm32v/usbserial/defconfig b/nuttx/configs/hymini-stm32v/usbserial/defconfig index 1a9a6ab28..37dcb860c 100755 --- a/nuttx/configs/hymini-stm32v/usbserial/defconfig +++ b/nuttx/configs/hymini-stm32v/usbserial/defconfig @@ -777,6 +777,18 @@ CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # +# Watchdog timer configuration +# +# CONFIG_WATCHDOG - Enable overall watchdog timer driver support. +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +CONFIG_WATCHDOG=n + +# # Settings for examples/uip # CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) @@ -918,6 +930,40 @@ CONFIG_EXAMPLES_USBTERM_TRACECONTROLLER=n CONFIG_EXAMPLES_USBTERM_TRACEINTERRUPTS=n # +# Settings for examples/watchdog +# +# This test depends on these specific Watchdog/NSH configurations settings (your +# specific watchdog hardware settings might require additional settings). +# +# CONFIG_WATCHDOG- Enables watchdog timer support support. +# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH +# built-in function. Default: Not built! The example can only be used +# as an NSH built-in application +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +# Specific configuration options for this example include: +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. +# Default: /dev/watchdog0 +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example +# will ping the watchdog before letting the watchdog expire. Default: 5000 +# milliseconds +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in +# milliseconds. Default: 500 milliseconds. +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in +# milliseconds before the watchdog timer expires. Default: 2000 +# milliseconds. +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT + +# # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP diff --git a/nuttx/configs/hymini-stm32v/usbstorage/defconfig b/nuttx/configs/hymini-stm32v/usbstorage/defconfig index 758d087b2..4c52c4839 100755 --- a/nuttx/configs/hymini-stm32v/usbstorage/defconfig +++ b/nuttx/configs/hymini-stm32v/usbstorage/defconfig @@ -721,6 +721,18 @@ CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # +# Watchdog timer configuration +# +# CONFIG_WATCHDOG - Enable overall watchdog timer driver support. +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +CONFIG_WATCHDOG=n + +# # Settings for examples/uip # CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) @@ -893,6 +905,40 @@ CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER=n CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS=n # +# Settings for examples/watchdog +# +# This test depends on these specific Watchdog/NSH configurations settings (your +# specific watchdog hardware settings might require additional settings). +# +# CONFIG_WATCHDOG- Enables watchdog timer support support. +# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH +# built-in function. Default: Not built! The example can only be used +# as an NSH built-in application +# +# The STM32 also needs one of the following enabled: +# +# CONFIG_STM32_WWDG=y, OR +# CONFIG_STM32_IWDG=y (but not both) +# +# Specific configuration options for this example include: +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. +# Default: /dev/watchdog0 +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example +# will ping the watchdog before letting the watchdog expire. Default: 5000 +# milliseconds +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in +# milliseconds. Default: 500 milliseconds. +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in +# milliseconds before the watchdog timer expires. Default: 2000 +# milliseconds. +# +# CONFIG_EXAMPLES_WATCHDOG_DEVPATH +# CONFIG_EXAMPLES_WATCHDOG_PINGTIME +# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY +# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT + +# # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP |