diff options
Diffstat (limited to 'nuttx/configs/lm3s6965-ek/README.txt')
-rw-r--r-- | nuttx/configs/lm3s6965-ek/README.txt | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/nuttx/configs/lm3s6965-ek/README.txt b/nuttx/configs/lm3s6965-ek/README.txt index 813e11467..77f034bf5 100644 --- a/nuttx/configs/lm3s6965-ek/README.txt +++ b/nuttx/configs/lm3s6965-ek/README.txt @@ -387,7 +387,7 @@ Stellaris LM3S6965 Evaluation Kit Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization + CONFIG_ARCH_IRQPRIO - The LM3S6965 supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y @@ -411,7 +411,7 @@ Stellaris LM3S6965 Evaluation Kit Configuration Options the delay actually is 100 seconds. There are configurations for disabling support for interrupts GPIO ports. - GPIOJ must be disabled because it does not exist on the LM3S6918. + GPIOJ must be disabled because it does not exist on the LM3S6965. Additional interrupt support can be disabled if desired to reduce memory footprint. @@ -425,7 +425,7 @@ Stellaris LM3S6965 Evaluation Kit Configuration Options CONFIG_LM_DISABLE_GPIOH_IRQS=n CONFIG_LM_DISABLE_GPIOJ_IRQS=y - LM3S6818 specific device driver settings + LM3S6965 specific device driver settings CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the console and ttys0 (default is the UART0). @@ -449,7 +449,7 @@ Stellaris LM3S6965 Evaluation Kit Configuration Options Rx FIFO overrun errors. Default: half of the Tx FIFO size (4). CONFIG_LM_ETHERNET - This must be set (along with CONFIG_NET) - to build the LM3S Ethernet driver + to build the Stellaris Ethernet driver CONFIG_LM_ETHLEDS - Enable to use Ethernet LEDs on the board. CONFIG_LM_BOARDMAC - If the board-specific logic can provide a MAC address (via lm_ethernetmac()), then this should be selected. |