diff options
Diffstat (limited to 'nuttx/configs/lm3s6965-ek/README.txt')
| -rw-r--r-- | nuttx/configs/lm3s6965-ek/README.txt | 52 |
1 files changed, 52 insertions, 0 deletions
diff --git a/nuttx/configs/lm3s6965-ek/README.txt b/nuttx/configs/lm3s6965-ek/README.txt index e67b858b0..a70db8460 100644 --- a/nuttx/configs/lm3s6965-ek/README.txt +++ b/nuttx/configs/lm3s6965-ek/README.txt @@ -554,6 +554,32 @@ sub-directory and can be selected as follow: Where <subdir> is one of the following: + discover: + A configuration for the UDP discovery tool at apps/examples/discover. + Contributed by Max Holtzberg. + + NOTES: + 1. This configuration uses the mconf-based configuration tool. To + change this configuration using that tool, you should: + + a. Build and install the kconfig-mconf tool. See nuttx/README.txt + and misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. Default platform/toolchain: + + CONFIG_HOST_LINUX=y : Linux (Cygwin under Windows okay too). + CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc) + CONFIG_ARMV7M_OABI_TOOLCHAIN=y : The older OABI version + CONFIG_RAW_BINARY=y : Output formats: ELF and raw binary + + 3. As it is configured now, you MUST have a network connected. + Otherwise, the NSH prompt will not come up because the Ethernet + driver is waiting for the network to come up. That is probably + a bug in the Ethernet driver behavior! + nsh: Configures the NuttShell (nsh) located at examples/nsh. The Configuration enables both the serial and telnetd NSH interfaces. @@ -624,3 +650,29 @@ Where <subdir> is one of the following: CONFIG_HOST_LINUX=y : Linux (Cygwin under Windows okay too). CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc) CONFIG_RAW_BINARY=y : Output formats: ELF and raw binary + + tcpecho: + This configuration builds the simple TCP echo example based on W.Richard + Steven UNIX Programming book to ensure correct usage of the socket API. + Contributed by Max Holtzberg. + + NOTES: + 1. This configuration uses the mconf-based configuration tool. To + change this configuration using that tool, you should: + + a. Build and install the kconfig-mconf tool. See nuttx/README.txt + and misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. Default platform/toolchain: + + CONFIG_HOST_LINUX=y : Linux + CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y : Codesourcery for Linux + CONFIG_RAW_BINARY=y : Output formats: ELF and raw binary + + 3. As it is configured now, you MUST have a network connected. + Otherwise, the NSH prompt will not come up because the Ethernet + driver is waiting for the network to come up. That is probably + a bug in the Ethernet driver behavior! |