diff options
Diffstat (limited to 'nuttx/configs/lm4f120-launchpad/README.txt')
| -rw-r--r-- | nuttx/configs/lm4f120-launchpad/README.txt | 40 |
1 files changed, 31 insertions, 9 deletions
diff --git a/nuttx/configs/lm4f120-launchpad/README.txt b/nuttx/configs/lm4f120-launchpad/README.txt index b4d6fda93..ac7105fd2 100644 --- a/nuttx/configs/lm4f120-launchpad/README.txt +++ b/nuttx/configs/lm4f120-launchpad/README.txt @@ -136,16 +136,33 @@ Using OpenOCD and GDB with an FT2232 JTAG emulator Building OpenOCD under Cygwin: - Refer to configs/lm4f120-launchpad/README.txt + Refer to configs/olimex-lpc1766stk/README.txt Installing OpenOCD in Linux: - sudo apt-get install openocd + sudo apt-get install openocd + + As of this writing, there is no support for the lm4f120 in the package + above. You will have to build openocd from its source (as of this writing + the latest commit was b9b4bd1a6410ff1b2885d9c2abe16a4ae7cb885f): + + git clone http://git.code.sf.net/p/openocd/code openocd + cd openocd + + Then, add the patches provided by http://openocd.zylin.com/922: + + git fetch http://openocd.zylin.com/openocd refs/changes/22/922/14 && git checkout FETCH_HEAD + ./bootstrap + ./configure --enable-maintainer-mode --enable-ti-icdi + make + sudo make install + + For additional help, see http://processors.wiki.ti.com/index.php/Stellaris_Launchpad_with_OpenOCD_and_Linux Helper Scripts. - I have been using the on-board FT2232 JTAG/SWD/SWO interface. OpenOCD - requires a configuration file. I keep the one I used last here: + I have been using the on-board In-Circuit Debug Interface (ICDI) interface. + OpenOCD requires a configuration file. I keep the one I used last here: configs/lm4f120-launchpad/tools/lm4f120-launchpad.cfg @@ -155,9 +172,9 @@ Using OpenOCD and GDB with an FT2232 JTAG emulator /usr/share/openocd/scripts. As of this writing, the configuration files of interest were: - /usr/share/openocd/scripts/interface/luminary.cfg - /usr/share/openocd/scripts/board/ek-lm3s6965.cfg - /usr/share/openocd/scripts/target/stellaris.cfg + /usr/local/share/openocd/scripts/board/ek-lm4f120xl.cfg + /usr/local/share/openocd/scripts/interface/ti-icdi.cfg + /usr/local/share/openocd/scripts/target/stellaris_icdi.cfg There is also a script on the tools/ directory that I use to start the OpenOCD daemon on my system called oocd.sh. That script will @@ -169,9 +186,14 @@ Using OpenOCD and GDB with an FT2232 JTAG emulator Starting OpenOCD - Then you should be able to start the OpenOCD daemon like: + If you are in the top-level NuttX build directlory then you should + be able to start the OpenOCD daemon like: + + oocd.sh $PWD - configs/lm4f120-launchpad/tools/oocd.sh $PWD + The relative path to the oocd.sh script is configs/lm4f120-launchpad/tools, + but that should have been added to your PATH variable when you sourced + the setenv.sh script. Connecting GDB |